:
We probably to have to run a few commands with the tape mounted. Do
> you have the exact SCSI command sent somewhere in the logs ?
>
> On Thu, Mar 15, 2018 at 4:53 PM, Milan Stubniak <stub...@gmail.com
> > wrote:
> > Hello,
> > i would like to ask about write
o the tape earlier. Is this one of the affected tapes when
> there was a hardware problem on the FC side ?
>
> Does an 'audit volume B10003L5' succeed ?
>
> On Wed, May 3, 2017 at 2:18 PM, Milan Stubniak <stubni...@gmail.com>
> wrote:
> > Thanks for explanation,
> >
&
e, unlike we first thought.
>
> We don't know yet if the issue is while writing or reading. If its
> while reading then its easily fixable.
>
> On Mon, Apr 10, 2017 at 8:34 PM, Milan Stubniak <stub...@gmail.com
> > wrote:
> > No the problem is not only for B9L5, aft
which had configured disk partitions as
> physical storage.
>
> After removing the setting, restart, then run diagnostics and send it
> to vtlsu...@quadstor.com . We will take a look.
>
> On Mon, Mar 13, 2017 at 9:51 PM, Milan Stubniak <stub...@gmail.com
> > wrote:
d.
> >> ./physscan > /tmp/physscan.out
> >> multipath -ll > /tmp/multipath.out
> >>
> >>
> >> Send us /tmp/physscan.out /tmp/multipath.out along with the
> >> diagnostics logs to vtlsu...@quadstor.com
> >>
> >> On
est to wait till tomorrow before trying out CentOS
> >> 7. We are trying out a few things at our end.
> >>
> >> On Tue, Feb 21, 2017 at 2:18 PM, QUADStor VTL Support
> >> <vtlsupp...@quadstor.com> wrote:
> >>> We are still looking at this. Cent
Hi, i would like to ask abouth my mpath disk. i have store pool created
with 5 multipath disk:
dm-3,dm-2,dm-1,dm-8,dm-0.
When i mapped new disk from storage lets say dm-10 and i pushed the button
rescan (physical storage tab), my disk dm-1 was N/A in that momment.
Probably problem with scan
zation. Correct ?
>
> On Thu, Feb 16, 2017 at 4:49 AM, Milan Stubniak <stubni...@gmail.com>
> wrote:
> > I tried it but without success. It was the same.
> >
> > Also i tried increase number of slots by command :
> quadstorvtl/bin/vtconfig
> > -v vtl1-s 30 , b
Than for your response,
iscsi is working, my mistake - bad syntax.
Regards,
Milan
2017-02-15 18:29 GMT+01:00 QUADStor VTL Support <vtlsupp...@quadstor.com>:
> Best thing here will be a wireshark output
>
> On Wed, Feb 15, 2017 at 8:32 PM, Milan Stubniak <stubni...@gmail.co
rver boot - but
> >> quadstorvtl not work (as expected).
> >>
> >> What can I do maybe try migrate from Centos 6 to Centos 7?
> >>
> >> Regards.
> >>
> >> Milan
> >>
> >>
> >>
> >>
> >>
&g
using original OS driver from original initramfs server boot - but
quadstorvtl not work (as expected).
What can I do maybe try migrate from Centos 6 to Centos 7?
Regards.
Milan
2017-02-14 16:11 GMT+01:00 Milan Stubniak <stubni...@gmail.com>:
> HI,
>
> Boot disk is a
in. Do you have any further information on the boot
> problem which you can share. You can send that information to
> vtlsu...@quadstor.com
>
> On Tue, Feb 14, 2017 at 5:30 PM, Milan Stubniak <stub...@gmail.com
> > wrote:
> > Hello,
> >
> > i would like to
Hello,
i would like to ask, if it is possile to somehow increase number of slots
in existing vtl?
I need to add more vcartridges. (maybe by changes in databse?)
p.s. I had another problem too. I was performing upgrade to quadstor 3.0.11
from 3.0.8 and my centos 6.8 (kernel 2.6.32-642.13.1)
13 matches
Mail list logo
