The only thing I could find is this, from dom0s dmesg:
[ 29.251207] xhci_hcd :05:00.0: remove, state 1
[ 29.251216] usb usb4: USB disconnect, device number 1
[ 29.251218] usb 4-1: USB disconnect, device number 2
[ 29.251219] usb 4-1.1: USB disconnect, device number 3
[ 29.251220] usb
Am Sonntag, 4. Dezember 2016 22:59:28 UTC+1 schrieb Marek Marczykowski-Górecki:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA256
>
> On Sun, Dec 04, 2016 at 12:18:23AM -0800, Benjamin Richter wrote:
> > Am Sonntag, 4. Dezember 2016 01:33:31 UTC+1 schrieb Marek
> > Marczykowski-Górecki:
> >
>
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On Sun, Dec 04, 2016 at 12:18:23AM -0800, Benjamin Richter wrote:
> Am Sonntag, 4. Dezember 2016 01:33:31 UTC+1 schrieb Marek
> Marczykowski-Górecki:
>
> > > I've attached the ethernet dongle to the same port as the logitech
> > > keyboard, but it
Am Sonntag, 4. Dezember 2016 01:33:31 UTC+1 schrieb Marek Marczykowski-Górecki:
> > I've attached the ethernet dongle to the same port as the logitech
> > keyboard, but it does not show up anywhere.
>
> If you see the device in dom0 in some configuration, take a look at its
> sysfs path - it wil
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On Sat, Dec 03, 2016 at 04:24:05PM -0800, Benjamin Richter wrote:
> Am Sonntag, 4. Dezember 2016 01:19:45 UTC+1 schrieb Marek
> Marczykowski-Górecki:
> > -BEGIN PGP SIGNED MESSAGE-
> > Hash: SHA256
> >
> > On Sat, Dec 03, 2016 at 04:14:48PM
Am Sonntag, 4. Dezember 2016 01:19:45 UTC+1 schrieb Marek Marczykowski-Górecki:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA256
>
> On Sat, Dec 03, 2016 at 04:14:48PM -0800, Benjamin Richter wrote:
> > I have revisited an earlier approach with some more success.
> > I attached only the usb con
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On Sat, Dec 03, 2016 at 04:14:48PM -0800, Benjamin Richter wrote:
> I have revisited an earlier approach with some more success.
> I attached only the usb controller, not the bridges. This seems to work:
>
> sudo lspci
> 00:00.0 USB controller: Inte
I have revisited an earlier approach with some more success.
I attached only the usb controller, not the bridges. This seems to work:
sudo lspci
00:00.0 USB controller: Intel Corporation DSL6340 USB 3.1 Controller [Alpine
Ridge]
00:01.0 Network controller: Intel Corporation Wireless 7265 (rev 59)
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On Sat, Dec 03, 2016 at 07:13:41AM -0800, Benjamin Richter wrote:
> Here I attached the PCI devices of the docking station to sys-net an rebooted
> for good measure.
> As you can see, the bridges show up, but the usb controller and the usb
> device