On Tuesday, April 16, 2019 at 2:17:45 AM UTC-7, awokd wrote:
> Came across the right way to do this. See the "Change xen configuration
> directly in an iso image" section under
> https://www.qubes-os.org/doc/uefi-troubleshooting/#change-installer-kernel-parameters-in-uefi.
I tried to change
Came across the right way to do this. See the "Change xen configuration
directly in an iso image" section under
https://www.qubes-os.org/doc/uefi-troubleshooting/#change-installer-kernel-parameters-in-uefi.
--
You received this message because you are subscribed to the Google Groups
Nicklas, (understanding you have a 5530): I successfully installed qubesos on
my 5520, but I had to disable my second physical hard drive in the bios. This
was the hard drive I was not installing qubes onto. Once I disabled the
non-qubes drive, Jim Snider's 8/9/18 install steps above worked
Nicklas Williams wrote on 4/5/19 9:43 PM:
On Wednesday, April 3, 2019 at 2:33:16 PM UTC-7, awokd wrote:
Nicklas Williams wrote on 4/3/19 9:30 PM:
Thanks for your help. The issue here is that I cannot get to the loader. If i boot to USB it
works after the kernel params listed above, but this
On Wednesday, April 3, 2019 at 2:33:16 PM UTC-7, awokd wrote:
> Nicklas Williams wrote on 4/3/19 9:30 PM:
> > Thanks for your help. The issue here is that I cannot get to the loader.
> > If i boot to USB it works after the kernel params listed above, but this
> > model cannot do legacy boot to
On Wednesday, April 3, 2019 at 2:33:16 PM UTC-7, awokd wrote:
> Nicklas Williams wrote on 4/3/19 9:30 PM:
> > Thanks for your help. The issue here is that I cannot get to the loader.
> > If i boot to USB it works after the kernel params listed above, but this
> > model cannot do legacy boot to
Nicklas Williams wrote on 4/3/19 9:30 PM:
Thanks for your help. The issue here is that I cannot get to the loader. If i boot to USB it
works after the kernel params listed above, but this model cannot do legacy boot to internal
drives. I have to do UEFI install but UEFI fails before I get
Thanks for your help. The issue here is that I cannot get to the loader. If i
boot to USB it works after the kernel params listed above, but this model
cannot do legacy boot to internal drives. I have to do UEFI install but UEFI
fails before I get to anaconda. I need to be able to change
Nicklas Williams:
> On Monday, March 25, 2019 at 1:40:28 AM UTC-7, smvi...@invisson.com wrote:
>> El sábado, 23 de marzo de 2019, 3:28:31 (UTC+1), Nicklas Williams escribió:
>>> I Bought a new precision 5530 recently for Qubes but I have been unable to
>>> get the Qubes install to work. I
On Monday, March 25, 2019 at 1:40:28 AM UTC-7, smvi...@invisson.com wrote:
> El sábado, 23 de marzo de 2019, 3:28:31 (UTC+1), Nicklas Williams escribió:
> > I Bought a new precision 5530 recently for Qubes but I have been unable to
> > get the Qubes install to work. I find that I am forced to
El sábado, 23 de marzo de 2019, 3:28:31 (UTC+1), Nicklas Williams escribió:
> I Bought a new precision 5530 recently for Qubes but I have been unable to
> get the Qubes install to work. I find that I am forced to use UEFI because
> the 5530 doesnt allow legacy boot from internal HDs. I'm
I Bought a new precision 5530 recently for Qubes but I have been unable to get
the Qubes install to work. I find that I am forced to use UEFI because the
5530 doesnt allow legacy boot from internal HDs. I'm trying to make the edits
to the cfg files on a linux system now to try again. I was
On Tuesday, 18 December 2018 08:18:15 UTC, smvi...@invisson.com wrote:
> El martes, 18 de diciembre de 2018, 6:05:18 (UTC+1), Yassine escribió:
> >
> > Regarding issues with when unplugging thunderbolt after boot, this is due
> > to PCI hotplugging being disabled (for obvious security reasons)
El martes, 18 de diciembre de 2018, 6:05:18 (UTC+1), Yassine escribió:
>
> Regarding issues with when unplugging thunderbolt after boot, this is due to
> PCI hotplugging being disabled (for obvious security reasons) - more details
> here https://github.com/QubesOS/qubes-issues/issues/1673
>
>
On Monday, 17 December 2018 20:05:53 UTC, smvi...@invisson.com wrote:
> > I have a Precision 5520 and the USB-C Ethernet adapter that came with
> > it. I'm running Qubes R4.0.
> >
> > I've been able to use the adapter once per boot before I unplug it. If I
> > unplug it and plug it back in, then
> I have a Precision 5520 and the USB-C Ethernet adapter that came with
> it. I'm running Qubes R4.0.
>
> I've been able to use the adapter once per boot before I unplug it. If I
> unplug it and plug it back in, then it doesn't show up as an Ethernet
> device in the NetVM, and I have to reboot
On 12/17/18 11:43 AM, smvice...@invisson.com wrote:
> So I have a Precision 5530, and after some similar tweaks to those
> described here, I managed to install Qubes 4.0. Everything seem to be
> working perfectly fine (Including Wi-Fi) except for the Ethernet
> adapter that I need to connect to
So I have a Precision 5530, and after some similar tweaks to those described
here, I managed to install Qubes 4.0. Everything seem to be working perfectly
fine (Including Wi-Fi) except for the Ethernet adapter that I need to connect
to the USB-C (Thunderbolt) port. The adapter is detected and I
On Sunday, May 6, 2018 at 9:46:32 AM UTC-4, Yassine wrote:
> Updating previous report as reinstalling from 4.0-rc3 to 4.0
>
> Needed to edit xen EFI config to remove mapbs/noexitboot keys and disable
> nouveau modesetting (nouveau.modeset=0)
Jim,
Were you able to successfully install Qubes UEFI
On Thu, August 9, 2018 4:29 pm, Jim Snider wrote:
> FOLLOW UP NOTE: I would like to try again to install Qubes UEFI from the
> dd produced usb but I have not been able to edit the READ-ONLY
> /EFI/BOOT/BOOTX64.cfg file to make the needed kernel options. Either, I
> have not been able to get the
On Thursday, August 9, 2018 at 10:36:55 AM UTC-5, Jim Snider wrote:
> On Wednesday, August 8, 2018 at 10:19:46 AM UTC-5, Yassine wrote:
> > There was a mistake in the install kernel parameter I shared, instead of
> > "nouveau.modeset=1" it should be "nouveau.modeset=0"
> >
> >
> >
> > On Wed,
On Wednesday, August 8, 2018 at 10:19:46 AM UTC-5, Yassine wrote:
> There was a mistake in the install kernel parameter I shared, instead of
> "nouveau.modeset=1" it should be "nouveau.modeset=0"
>
>
>
> On Wed, 8 Aug 2018 at 08:20, Yassine wrote:
> On Tuesday, 7 August 2018 14:49:33 UTC+1,
There was a mistake in the install kernel parameter I shared, instead
of "nouveau.modeset=1"
it should be "nouveau.modeset=0"
On Wed, 8 Aug 2018 at 08:20, Yassine wrote:
> On Tuesday, 7 August 2018 14:49:33 UTC+1, Jim Snider wrote:
> > On Monday, May 7, 2018 at 12:03:17 AM UTC-5, Yassine
On Tuesday, 7 August 2018 14:49:33 UTC+1, Jim Snider wrote:
> On Monday, May 7, 2018 at 12:03:17 AM UTC-5, Yassine wrote:
> > On Sunday, 6 May 2018 14:46:32 UTC+1, Yassine wrote:
> > > Updating previous report as reinstalling from 4.0-rc3 to 4.0
> > >
> > > Needed to edit xen EFI config to
On Tue, August 7, 2018 1:49 pm, jim.h.sni...@gmail.com wrote:
Can you disable the nvidia in your UEFI config? Try that first if so.
> I booted the ISO USB Legacy, At Blue Qubes screen, Trouble Shooting, TAB,
> added nouveau.modeset=0 The results of the install:
>
>
> message : "Not asking for
On Monday, May 7, 2018 at 12:03:17 AM UTC-5, Yassine wrote:
> On Sunday, 6 May 2018 14:46:32 UTC+1, Yassine wrote:
> > Updating previous report as reinstalling from 4.0-rc3 to 4.0
> >
> > Needed to edit xen EFI config to remove mapbs/noexitboot keys and disable
> > nouveau modesetting
On Sunday, 6 May 2018 14:46:32 UTC+1, Yassine wrote:
> Updating previous report as reinstalling from 4.0-rc3 to 4.0
>
> Needed to edit xen EFI config to remove mapbs/noexitboot keys and disable
> nouveau modesetting (nouveau.modeset=0)
After install I tested different configuration and was
27 matches
Mail list logo
