[RBW] Re: Recomendations For Cycling-Specific Vehicle

I have a 2005 Toyota Sienna and love it for bike transport (not too happy with Toyota recall service though). I often drive sag on local events and once was able to fit 2 road bikes and a recumbent along with the three riders in the van. No need to take off any wheels. Get decent mileage

[RBW] Re: Eat Bacon Don't Jog--Goal set, goal met

Bill, Thanks for sharingI feel I am in the same boat with higher numbers. This is an inspiration to get on it for me. Dennis in PDX On Tuesday, March 6, 2018 at 1:13:23 PM UTC-8, Bill Lindsay wrote: > > Over the last few years, I've been a reasonably low-carb person. I > generally steer

Re: [RBW] Leah's Bicycle Bus! (and question)

WTF!!! how can the police allow the driver to refuse to answer the door ? The driver has committed at least several violations if not felonies. I am so glad you and your son escaped any injury. Dennis in PDX On Thursday, May 11, 2017 at 5:46:55 PM UTC-7, LeahFoy wrote: > > The Bicycle Bus has

[RBW] Re: Walkapillar s240 ride report

Great account Drew - but I am sorry about the poison oak introduction. As a former californian, I have had some nasty run ins with it. If bad enough cortisone shots and/or cream will help. Dennis now in PDX On Saturday, March 25, 2017 at 6:44:20 PM UTC-7, drew wrote: > > I went out after work

[RBW] Re: FS: Brooks Cambium C17 in Rust

Hi All - thanks for looking. I have received an offer so the Cambium C17 id sold Dennis in PDX On Sunday, February 19, 2017 at 10:04:06 PM UTC-8, Dennis Hogan wrote: > > Hi all, > > I have a gently used Brooks Cambium C17 in Rust. There are a few marks and > wear spots

[RBW] FS: Brooks Cambium C17 in Rust

Hi all, I have a gently used Brooks Cambium C17 in Rust. There are a few marks and wear spots - see the link to the pictures: https://flic.kr/ps/26Rmjy (hope this works - can send pics directly if needed) I estimate I have about 2000 miles on it. It was on my A. Homer Hilsen. I loved the

Re: [RBW] The Liftatube fits me perfect

The Faraday is made by a local company Walnut Studio and can be purchased from them. www.walnutstudiolo.com Same price. Check out their other products. Dennis in PDX -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this

[RBW] Re: Ride Report-- Mini tour of SW New Mexico and SE Arizona

Great job John! The pics are wonderful - I've visited the Silver City area and think there may have been some serious climbing but also serious scenery. Dennis in PDX On Thursday, October 13, 2016 at 11:01:02 PM UTC-7, John M wrote: > > > For years I have wanted to make a bike tour out of the

[RBW] Re: Stolen rivs in seattle

That sucks! do you have any pics or other details? I understand that sometimes stolen bikes travel to Portland and vise versa. Will keep an eye out Dennis in PDX On Saturday, March 26, 2016 at 4:09:23 PM UTC-7, Michael Ullmer wrote: > > I had my two rivs stolen out of my house last night, a

[RBW] Re: First Rivendell, first ride, first post, New Joe Appaloosa

That set up looks like a beautiful and functional touring rig! Dennis in PDX On Saturday, March 26, 2016 at 7:04:51 AM UTC-7, 2016_joeApp wrote: > > Got my "Joe" on Wed. built on Fri. Went for a 20 mile ride!. All I can say > is Wow!!! Rides smooth as silk. My ride is a 62 never had one that

[RBW] Re: FS: Burley Solo Trailer, with Cargo kit

Hey Bill I would love to buy it if it still avail Dennis in PDX On Tuesday, March 15, 2016 at 10:14:39 AM UTC-7, Bill Lindsay wrote: > > There is a recent thread about infant carrying techniques. If anyone is > looking for the trailer solution, I have a Burley Solo that I would be > delighted

[RBW] Re: My Joe Appaloosa

Sweet Ride !! Dennis in PDX On Sunday, March 6, 2016 at 5:06:12 PM UTC-8, Bill Lindsay wrote: > > > > > >

[RBW] Re: Rene's Hungapillar: Version 3.0

Great pics and beautiful build!! Dennis in PDX On Sunday, March 6, 2016 at 12:41:36 PM UTC-8, Brian Campbell wrote: > > I was the proud purchaser of Rene's Hunq frame with the low trail fork. > Already having a 61cm Hilsen, the Hunq was acquired with off-road riding in > mind. I finally got it

[RBW] Re: Latest Atlantis update

Just "WOW!" Dennis in PDX On Tuesday, March 1, 2016 at 6:11:41 PM UTC-8, René wrote: > > Ha ha ha ha! That's right! > > When I had the new low trail fork made, it had to be painted. I debated > for months on what color to have it repainted, but finally realized that > there just was no better

[RBW] Re: A Mount Tam Experience.

Awesome recap - I have viewed the pics in previous posts but if anyone hasn't, they are not to be missed. Dennis in PDX On Wednesday, January 13, 2016 at 10:05:56 AM UTC-8, hsmitham wrote: > > This happened. > > http://velocipeedemusings.com/ > > Tail Winds, > > ~Hugh > -- You received this

[RBW] Re: Doing a promo on the ACW mugs through the weekend for the coffee outsiders!

Jinxed, I have both the green and orange mugs and love them - the only caution I would make is that the diameter of the opening is too tight for a Aeropress. Tried it and the press got stuck in the cup. Got it out and still enjoyed my coffee outside but it was a challange. Dennis in PDX On

[RBW] Re: Keven

+1 on Keven - he is very chill. I last interacted with him on a visit to BB a couple weekends ago. He helped me conceptualize a new cockpit for my Homer based on a test ride on a Hunquapillar that Roman had set up for me. And he gave me a BB pin when I said that I got the last free Rivelo patch

[RBW] Re: FS Acorn Rando Bag.

Hi Hugh, Is it the regular size rando bag or the larger? If the larger, I would be interested. Thx Dennis in PDX On Thursday, October 15, 2015 at 9:02:26 PM UTC-7, hsmitham wrote: > > Just throwing it out there! I have used Acorn Green Rando bag. If'n yer > interested shoot me a private email.

Re: [RBW] Re: Compass Knickers

I followed a similar path and got a pair of "army" (not sure which army) wool pants at good 'ol Andy & Bax in Portland. Heavy duty wool and buttons - took them to a local seamstress and had them converted to knickers - all in they were about $55 - they are very good for the winter but a bit of

[RBW] Homer goes to France to ride Paris Brest Paris - a ride report

Great description but how do you ride, do controls, eat and sleep and still get the pics? -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: Anne on the Great Divide

Anne Bonne chance and soyez prudent! Dennis in PDX On Wednesday, June 24, 2015 at 11:26:46 AM UTC-7, Anne Paulson wrote: I leave for Banff Saturday, and start toward the Mexican border July 1. In case you feel like following my progress, my GPS breadcrumb trail will be here:

[RBW] Re: sf-la coast tour thoughts and preparation

+1 for John's Big Agnes system. I don't have it but wish I did. Am contemplating velcro to attach the bag to the pad but haven't tried the idea yet. Am also a side sleeper and find the bag and pad seem to have a -/+ relationship of mutual attraction leading to sore mornings. Dennis in PDX On

[RBW] Re: Visting Portland

Hey Kurt, Check out the rides at the Portland Wheelman site (PWTC.com). They offer rides every day of the week that go all over PDX at various paces. You'll get a good sense of the area and they almost always include a coffee stop. Dennis in PDX On Tuesday, May 26, 2015 at 9:14:47 AM UTC-7,

Re: [RBW] 56cm 650B Toyo Homer for sale on RBW site...

Huh?? On Thursday, February 5, 2015 at 6:49:14 PM UTC-8, Christopher Chen wrote: Find the thing that makes you happy and do it for the rest of your life I'm rationalizing this by thinking this bike would primarily be ridden by someone else but hey we'll have to see what she says On Thu,

[RBW] Knobbies for 26 Atlantis

Anne - I put RockRoads on my AHH and loved them for road (they had a pleasing whooshing sound) and dirt and sand ( though in limited amts). Gave up on them because of not being able to solve fender issues. I live in Portland!! Then I got the Continental Cyclecross speed tire- it has a file tread

Re: [RBW] Re: Wheel Stabilizer or no?

I tried a cheap version on my touring bike - don't know if it was VO but was disappointed. The clamping ring on the downtube would slip letting the wheel flop - tried padding and no padding under the band but just could not keep it tight finally took it off as the paint was being damaged. The

[RBW] Re: Water (bottle) Retention

I use all different bottles but esp in the winter I use stainless steel with cap covers - I ride lots of country roads where they manure the fields so the dust is a bit funky. I like to have a clean spout to drink from. The rattle of the bottles in the cages and the scraping sound when putting

[RBW] Re: Autumn Quickbeam Ride!

Truly God's Country. Glad to see you are on the mend. Dennis in PDX On Sunday, September 28, 2014 12:33:34 PM UTC-7, Deacon Patrick wrote: I headed out this morning at 7, wheels crunching through the thick frost. I had no idea how far I would go, but had in the back of my mind that I’d ride

[RBW] Re: LED Fender Lights: Spanninga vs. PDW Fenderbot

Hi Peter I also have this light and love it (I still have a dyno powered tail light as well). I would offer the caution that I have had it fall off its mounting, be it a leather or fabric loop, several times. Even if I have cinched it down as tight as possible with the mount. I have taken to

[RBW] Re: Sunrace 9 speed 11-36

Hey Doug, Scroll down and you will see the 11-36 that he referred to. I am running the 12-36 Shimano with a triple and still miss the 11. I am going to try this to see if it helps. Of course I am not only slow but old. Dennis in PDX On Thursday, September 25, 2014 1:03:19 PM UTC-7, dougP

[RBW] Re: Well, Damn

Dude - that is practically right out of your home. Good thing it wasn't the Chicken. You would probably be the one doing the damageLOL. Really, glad it wasn't any worse. Hope you recover quickly Dennis in PDX On Saturday, September 6, 2014 8:01:26 PM UTC-7, Christopher Chen wrote: My

[RBW] Re: thump thump thump thump

Lynne, I'd give a call to Jude at SugarWheelWorks (http://www.sugarwheelworks.com/). Her shop is over on Williams in No Po. She'll be able to tell what is going on and she builds beautiful wheels. Dennis in PDX On Wednesday, May 7, 2014 9:41:28 PM UTC-7, Lynne Fitz wrote: my front wheel when

[RBW] Re: Attractive front derailers

Hi Jim I contacted Mark at Riv regarding upgrading the crankset on my Homer to a Sugino triple and he recommended a Shimano Claris FD-2403-B front derailer. They stock them for builds at Riv World Headquarters but don't have them in the catalog. It is not totally silver - the clamp is gray

[RBW] Re: Attractive front derailers

P.S. The Claris works fine with a 9-speed cassett Dennis in PDX On Thursday, May 1, 2014 9:49:53 AM UTC-7, Jim Bronson wrote: I need to buy a front derailer for my build that's going on. I was willing to do an ugly derailer in the back because it was already on hand. I'll switch it out

Re: [RBW] New Head-Badge Poster!

Hi Addison Another source for custom headbadges is Laura at the Path Less Pedaled. She and Russ have traveled by bike extensively and her headbadges were a source of support on those adventures. http://pathlesspedaled.com/marketplace She does beautiful work. Have seen it in person in

[RBW] Re: Pedal Stroke Click

Well Velcro and rubber are a far sight less messy than grease bearings - glad you've solved the mystery Dennis in PDX -- You received this message because you are subscribed to the Google Groups RBW Owners Bunch group. To unsubscribe from this group and stop receiving emails from it, send an

[RBW] Re: Pedal Stroke Click

Hey Patrick - I met to respond regarding your click but got distracted (not a surprise). I had a similar experience while riding the STP (Seattle to Portland) last year and the guy I happened to be riding alongside, he was on a Riv, said that it often is a seat issue. Sure enough when I got

[RBW] Re: Albastache conversion Complete!

Patrick +1 on the orange tape, twine and hoods - absolutely awesome! How many layers of tape, any padding under? Dennis in PDX On Saturday, April 12, 2014 1:56:09 PM UTC-7, Deacon Patrick wrote: Thanks to you all, your knowledge, suggestions, and various parts the conversion to Albastache is

[RBW] Re: Jamboree Ride Recon: 680 Trail

WhooHoo --- love the flowers - sweet ride ! Dennis in PDX (with rare sun) On Monday, April 7, 2014 9:05:54 PM UTC-7, Manuel Acosta wrote: Fun ride. Eric, Evan, Jeremy and one of the five members of TheBoyzontheHoods Mr.Irving himself. Did a little recon on half the Jamboree route. Great

[RBW] Re: Homer Hilsen on eBay ~ but FYI...

My 2012 AHH 65 1TT Waterford has two ??!! On Thursday, April 3, 2014 11:53:28 AM UTC-7, Eric wrote: My Waterford had three... On Thursday, April 3, 2014 1:39:45 PM UTC-5, Eric wrote: Good looking Homer on eBay but I didn't see 3 water bottle mounts so I emailed the seller and he confirmed

Re: [RBW] Re: Barlow Pass - using it, liking it

Hi All, I just switched out my last favorite rubber: Continental Cyclecross Speed 700-42C's that I bot from Riv last year --- great ride and good for both smooth and gravel as well as mud and freezing surfaces (actually measured 38mm on Mavic A319 rims at approx 60 lbs pressure). I now am

[RBW] Re: Will a Hilsen fit the Rock N Road Tires?

They fit my Oct 2013 AHH fine without fenders but with the SKSLonglows did not have enough clearance for the knobs. I found the SKS Velo Cross 55 fenders would work though they certainly don't look as nice -- You received this message because you are subscribed to the Google Groups RBW Owners

[RBW] Waitin' on my Riv--debating on Drops versus Albatross

Hi Tom...I am somewhat of a lurker too but have a few posts. I just changed the handlebars on my 2 yr old AHH from the Grand Bois Randonneur Bars from Compass/Bicycle Quarterly to the One-on-One Midge bar. I know this is a rather unusual choice for the Rivers but so far so good( approx. 300km on

Re: [RBW] Re: Portland: Eastside triple bump tour?

Chris - the 28th or 29th both work for me. Would love to get in some Rivness Dennis in PDX On Monday, August 26, 2013 11:13:18 PM UTC-7, Christopher Chen wrote: Okay let me rehash this since it's been a few weeks. I'm thinking about taking a tour in September so I have two free Saturdays:

[RBW] 56cm Romulus FS at Sellwood Cycles

Hi All - I was handing out flyers for the Hood River Harvest ride and saw this Riv Romulus for sale at Sellwood Cycles in Portland OR. Don't know anything about the bike or its history - it is on consignment. See it at this website: http://sellwoodcycle.com/used_bikes/road/ Regards Dennis in

[RBW] Re: Welcome to Portland, Zack

Hi Zack, welcome to the Rose City -- you cannot get a better introduction to the city than by the two-wheeled fun ambassadors: Andy(Smitty) Chris - just watch out for rides in the West Hill and stairways;-) Dennis in PDX On Saturday, August 10, 2013 5:47:39 PM UTC-7, Zack wrote: A

[RBW] Re: Long can be good, too

Brian - congrats on your first 300K - you are no longer a 300K virgin in the immortal words of Peg W. of SIR - at least that's what she told me after I did the Hot Springs 300K a few weeks ago with her and Narayan (sp) a fellow SIR. Your pics are great. Dennis in PDZ On Sunday, August 4, 2013

Re: [RBW] Re: Thin Gripsters are cool

I think you might be referring to the VP Vice - it has a longer spindle and no flats - see Rob at Ocean Air's comments in previous post in this thread. Dennis in PDX On Saturday, July 27, 2013 5:38:25 PM UTC-7, EricP wrote: I do believe there is a version of the Thin Gripster without the

[RBW] Re: Seattle to Portland is in 3 weeks.

I'm in - will be riding my 65cm AHH - Sherwood Forest Green. Green Acorn bags fore and aft. I am aiming for the one day ride with options for several naps and food stops. Dennis in PDX On

Re: [RBW] Re: Actual Tire Sizes

Hi Tom- I have been running the Continental 42's for several months. I bot them from Riv and they were said to actually measure 38 mm which I found to be true. I have liked them - mainly riding on roads but with a few wild rides on gravel, dirt, frozen dirt etc. My only problem was finding

[RBW] Re: Association of Caffeinated Wheelmen store NOW OPEN.

Order inthanks for doing this. Bikes coffee, esp. here in Portland, what a great combo! Dennis in PDX On Thursday, May 30, 2013 9:30:30 AM UTC-7, jinxed wrote: OK...it took me a bit to learn the ropes of setting up and running a store...but I think it's a go. Some additional items

[RBW] Re: Eight Days Around Eastern Oregon

Sweet Ride Smitty and as always, great pics - you guys looked a bit bundled up in many pics - what was the temp? Also how did your AHH handle the load? Dennis in PDX On Monday, April 29, 2013 2:36:05 PM UTC-7, Andy Smitty Schmidt wrote: Had a fun little adventure tooling around eastern oregon

[RBW] Homer Hilsen in the hills - a ride report

Thanks for the amazing description of your ride. I DNF a 200k last spring and know how hard it is to keep going in adverse conditions. Bravo! Dennis in PDX -- You received this message because you are subscribed to the Google Groups RBW Owners Bunch group. To unsubscribe from this group and

[RBW] Will a Hilsen fit the Rock N Road Tires?

My AHH fit the RR's without fenders. The ride was amazing on road and gravel. Unfortunately, I am in Portland and could not fit fenders with them. They were sold to a list member. I am currently running Continental Cyclecross 42 that Riv stocked at one time and they work with SLS Urban Cross

[RBW] Re: Will a Hilsen fit the Rock N Road Tires?

On Friday, March 29, 2013 4:31:55 AM UTC-7, Dennis Hogan wrote: My AHH fit the RR's without fenders. The ride was amazing on road and gravel. Unfortunately, I am in Portland and could not fit fenders with them. They were sold to a list member. I am currently running Continental

[RBW] Re: Eastern OR/Columbia Gorge Riv Ride?

Oh man! This would be awesome but I am out of town - I'll be there in spirit but not in pedal. Dennis in PDX On Monday, March 11, 2013 1:44:28 PM UTC-7, Andy Smitty Schmidt wrote: From the comments in my other post about riding in the area just east of the Columbia River Gorge, it sounds

[RBW] Re: Eastern Oregon Teaser

Great pics Smitty Tommy - that is a beautiful area - I do the Gorge Ride every year: Dalles to Mosher Tunnels and back via Rowena Crest and last year the day before I rode out 8 mile road as a warm up. It is a beautiful route. BTW the Gorge Ride is sponsored by the Friends of the Historic

[RBW] Re: First Dixie Mtn ride of 2013.

Hey Smitty - keep me in the loop. It sounds like a great ride. Thx Dennis in PDX On Thursday, February 21, 2013 5:02:24 PM UTC-8, Andy Smitty Schmidt wrote: The date Mike and I are looking at is March 2nd. Contact one of us off-list to be kept in the loop. --Smitty On Thursday, February

[RBW] Foss tubes

I had the same problem with a Foss tube - tried several times to find the hole with a water bath and no luck but when it was mounted and fully inflated I noticed that the leak was at the base of the stem- could hear it when the stem was deflected but it did not show up in the water bath under

[RBW] Re: 1st Ride Report

Hi Tommy- It wasn't till I saw the Burnside Bridge that I realized it was *YOUR Bombadi*l! That was a quick build and a beautiful one. Love the handlebar tape. Ride safely! You'll never go wrong listening to Smitty Manny. Dennis in PDX On Saturday, January 19, 2013 4:45:54 PM UTC-8,

[RBW] Re: Portland Rides in March/April?

+1 on the OR Randonneurs, a very nice group of riders, several Riv riders - for club rides, the Portland Wheelman have daily rides of varying distance and difficulty. Check their website at: pwtc.com. Look for the rides tab. Dennis in PDX On Saturday, January 19, 2013 9:11:13 AM UTC-8, Eric

[RBW] Re: My Riv AllRounder

Addison, Great pics and a great history of your bike. I can only wonder what changes the future will bring. Gotta love GP for his do-all versatile and beautiful designs. Dennis in PDX On Tuesday, January 8, 2013 5:43:41 AM UTC-8, Addison wrote: I was reminiscing about all the fun I've had

[RBW] Re: New Years Day PDX Ride?

Hi Smitty - Here are my few pics from the ride - I tried to caption them but do not think it took. http://www.flickr.com/photos/dhoganahh/sets/72157632418993582/show/ BTW, Happy Birthday Dennis in PDX On Tuesday, January 1, 2013 10:16:25 PM UTC-8, Andy Smitty Schmidt wrote: 13 folks

Re: [RBW] New Years Day PDX Ride?

, but I'll be MUSA'd up. Aaron Young Vancouver, WA On Monday, December 31, 2012, Dennis Hogan wrote: See you then - I'll start with the Wheelman and break off to see you at 11 Dennis in PDX On Monday, December 31, 2012 10:24:54 AM UTC-8, Andy Smitty Schmidt wrote: I got confirmation

[RBW] Re: New Years Day PDX Ride?

See you then - I'll start with the Wheelman and break off to see you at 11 Dennis in PDX On Monday, December 31, 2012 10:24:54 AM UTC-8, Andy Smitty Schmidt wrote: I got confirmation that the taco joint will be open on New Year's Day. The dining room is out of sight of the bikes, so a lock

[RBW] Re: New Years Day PDX Ride?

Smitty - this sounds good - I'll try to round up a neighbor or two as well Dennis in PDX On Friday, December 28, 2012 8:58:49 AM UTC-8, Andy Smitty Schmidt wrote: Well kids, The weather forecast for Jan 1 is looking pretty good, so I say we should do a PDX Riv ride. Here's what I have in

[RBW] Re: New Years Day PDX Ride?

Hey Smitty - I like the idea as long as it is not too early or too wet. I usually do the BTA or Wheelman ride which starts at 10am down on Naito Parkway by the battleship memorial. It could be a starting point for a Riv ride to more interesting spots. Dennis in PDX On Sunday, December 23,

[RBW] Anybody have great (or lousy) experience with waterproof iPhone5 mounts on your Riv? I need ones to investigate (and ones to avoid)

Hi Derek - I had the Biologic case (which is a battery that can be charged off a dyno hub with their equipment) The set up was for a iPhone 4 but I expect they will have one for the 5 soon if not already. It was a robust case waterproof etc added about 3hrs run time when using the iPhone as a

[RBW] Re: Cygolite mounting questions

+1 on both solutions - I use the Pauls for my rear lights Dennis in PDX On Monday, November 5, 2012 10:22:02 AM UTC-8, Stephen S wrote: Which part of the fork do you want to attach to? Paul's Gino mount works well on attaching to a braze on the fork.

[RBW] Re: Yellow leaves, wet bridges and sauerkraut

Here is my own photo-take on the ride - what Andy didn't mention was that when I picked him up he said another rider was going to follow us. It was Tommy who I met when he and Manny were doing the coast tour last August. I was in California and stopped in Tomales Bay at Hog Island Oysters on my

[RBW] Re: New/old magnets at Rivendell

Thanks Joe for the heads-up - those are great - have placed the order (plus a few other items to amortize the shipping cost ;-) ) Dennis in PDX On Thursday, November 1, 2012 6:19:37 PM UTC-7, Joe Bernard wrote: Well..I didn't expect to see *these *again. New Rivendell and Baggins Bags