Yes. A SO would work.
> On Aug 25, 2020, at 12:55 PM, ted wrote:
>
>
> Just QB or QB/SO?
>
>> On Thursday, August 20, 2020 at 4:37:28 PM UTC-7, J L wrote:
>> Anyone sitting on a size 56 Quickbeam that needs a new home? Let me know
>> offlist because I would really like to but it.
>>
>>
Hey Paul,
I have a Billie Bar. It does have a bunch of scratches because I tried it
with 7-8 stems before deciding that Boscos work better for me. If you
have 52cm ALU Bosco, I'd be happy to trade (assuming the scratches won't
bother you)
Cheers,
Ash
On Sunday, 23 August 2020 at 08:21:56
Sorry I wasn't clear. Rivendell had kickstand plate failures with the
double leg plescher back when their kickstand plates were much thinner than
they are now. I doubt the current plates would have a problem.
I just measured and the old plates are 0.9 to 1mm and the new plates are
3mm. Huge
64 cm qiuckbeam Washington, DC. $1,175. I think it’s a dark orange. Not
related to seller.
https://washingtondc.craigslist.org/mld/bik/d/riverdale-rivendell-quickbeam/7180873311.html
Up for sale is my 64cm Rivendell Quickbeam. This very rare bike is in great
condition, and has been one of
You might want to let a bike shop dig into this unless you're committed to
buying two types of BB tools and learning all about it. I'm big on the
buying and learning, but it's not a small project for a first-timer and
you're not even sure where the problem is yet. Could be a headache!
Joe "ok
Yeah I am very much not sold with the appearance with the drop bars, but I
am going to run mine with an upright bar (MAP / Ahearne bar, to be exact)
and I've come around on that. Or, more accurately, I've come to really like
the look of Gus/Suzie and I can by extension accept the Charlie.
I
On Tuesday, August 25, 2020 at 9:45:23 AM UTC-7 aeroperf wrote:
> However, a failure mode for Hollowtech is the bottom bracket creaking, and
> if you’re going to replace it, it is relatively easy.
> If you’re going to take the old one off and replace it with another BB51
> (or SRAM equivalent),
Just QB or QB/SO?
On Thursday, August 20, 2020 at 4:37:28 PM UTC-7, J L wrote:
>
> Anyone sitting on a size 56 Quickbeam that needs a new home? Let me know
> offlist because I would really like to but it.
>
> Jason
--
You received this message because you are subscribed to the Google Groups
Atlantis (Waterford)
51cm
2499
Chicago, IL
https://www.ebay.com/itm/293702982295
Atlantis
53cm
2000
Ft. Collins, CO
https://fortcollins.craigslist.org/bik/d/fort-collins-rivendell-atlantis/7182940024.html
--
You received this message because you are subscribed to the Google Groups "RBW
What Benz said. It may be from somewhere else - the pedals, or even the
seat.
However, a failure mode for Hollowtech is the bottom bracket creaking, and
if you’re going to replace it, it is relatively easy.
If you’re going to take the old one off and replace it with another BB51
(or SRAM
There is a sweet deal of a green Quickbeam on SF craigslist. The owner says it
is a 58 but isn't certain. It should be 58cm center of BB to top of seat lug.
Looks like it to me.
I found this on my quest for a 56. Anyone want to size up from a 56 to a 58?
Cheers
Jason
--
You received this
Thanks Benz. It's tough to tell exactly where the pops and creaks are
coming from but it seems to happen only during hard pedaling and kind of
feels like it's coming from the left (non-drive side) crank arm which is
attached with hex bolts. The whole crankset has always annoyed me, mostly
Justin, I will suggest investigating what's causing the creaking and
popping. Quite often, what appears to be from the crank may not actually be
from the crank. Especially with an Xtracycle Free Radical conversion, there
are more opportunities for creaks and pops. Unfortunately, troubleshooting
Okay thanks for the info. I'm not equipped or experienced with bottom
bracket replacement which is why I was hoping to salvage what's already
there and not have to remove and replace it. But maybe this is an
opportunity for me to figure it out. Will need to invest in some tools I
assume.
On
Justin—
To answer your last question first, no, that spindle won’t fit.
Any way you look at it you would have to replace the entire bottom bracket.
The crank creaking and popping is more than likely due to the bottom
bracket itself.
If you want the cheaper solution, just remove the crankset,
The sunrises and sunsets have been fantastic here in flyover territory.
Thanks.
On Monday, August 24, 2020 at 11:05:45 AM UTC-5 Ash wrote:
>
> The smoke situation in South Bay Area keeps changing between bad and very
> bad.
>
> These pictures are from a trail I frequent. Before the fire vs
I bought a mountain bike on Craigslist and have been using it with an
Xtracycle Free Radical conversion for a few months as a kid hauler and
cargo bike. The crankset and bottom bracket it came with are part of the
Shimano Hollowtech group: BB is Shimano SM-BB51
Yes, I can understand the mounting bolt or the kickstand legs, but not the
plate. At least not the one on my Clem. I guess if the plate is not beefy
enough it could be an issue. Definitely want to design it so that if
anything, the kickstand itself fails before any deformation of the frame is
I have a set of these that I used for about 200 miles on a hybrid I had
before giving in to a Clem purchase that fit me much better. They are rim
taped with Newbaums. How about $200 plus shipping?
https://www.rivbike.com/collections/wheels/products/700c-velocity-built-riv-standard-wheel-kit
On
Hello Reid,
I realize this is an old thread, but do you still have a Bille bar for
sale? trying to hunt one down and RBW is out.
(Google won't let me direct message for some reason, not sure why, so
posting here.)
Thx Paul
On Monday, April 20, 2020 at 9:20:03 AM UTC-4 Reid Echols wrote:
>
Hey all,
I just checked out a local Soma San Marcos (collaboration between Grant
Petersen and Soma) for sale in a 57cm. It's got a solid build list, topped off
by a Rich Lesnik-built wheelset. To me, it feels very similar in ride quality
to an A. Homer Hilsen. He's selling because he's in the
Hello Will,
Seems like a long shot as its been a while, but are either if the Billie
bars still available? Am looking for one.
(Would normally direct message you, but for some reason Google won't let
me. Can't sort it out as it does sometimes...)
On Friday, May 29, 2020 at 11:07:53 AM UTC-4
22 matches
Mail list logo
