>
>
>
> *From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On
> Behalf Of *Jay
> *Sent:* Saturday, October 17, 2020 2:23 PM
> *To:* RE-wrenches
> *Subject:* Re: [RE-wrenches] Metal roof/self taping screws
>
>
>
> Hi Jerry
>
>
>
> I th
We’ve had good luck with thread cutting screws. Found some 3/8“ diameter that
worked good with the LFeet and butyl tape. Need to pre drill the perlin.
Jeremy Rodriguez
Solar Installation / Design Expert
All Solar, Inc.
1463 M St
Penrose Colorado 81240
Sent by Jeremy's iPhone. Sorry for typos an
-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On
Behalf Of *Jay
*Sent:* Saturday, October 17, 2020 2:23 PM
*To:* RE-wrenches
*Subject:* Re: [RE-wrenches] Metal roof/self taping screws
Hi Jerry
I thought about it.
But they are $5 each
Not rated for L feet
Have 4 holes vs 1 hole
Hi Jerry
I thought about it.
But they are $5 each
Not rated for L feet
Have 4 holes vs 1 hole
There is no underlayment as it’s a barn
Using polybutylene tape and or caulk, it’s a pretty solid way to keep water out
and with the self tapping bolts is more secure to me ( thanks Allan).
The parts
I just found a company that has a very large selection of self tapping screws
and bolts. And lots of technical data.
https://www.dynamicfastener.com/wp-content/uploads/2020/04/2020-Hand-Guide-MAPP-small.pdf
This is the link to their catalog.
Otherwise just lookup dynamic fastener.
Jay
> O
There is a glaring lack of good options for 5V metal roofs in Florida.
Sure, there are some butyl tape based attachments that penetrate the metal,
but what happens when the truss lands below a V-crimp? The only real option
is a deck mount solution or truss blocking (which is excruciating in a
Flori
Why puncture the metal can't S-5 be used.
Jerry
On Sat, Oct 17, 2020, 12:42 PM Jay wrote:
> What do people recommend for a metal roof ( with flat sections, not
> corrugated)on 3/16” thick x 2” wide C channel for attaching L feet
>
> Self taping fasteners would be the easiest. Doing a nut and bol
EJOT
https://www.ejot.com/Building-Fasteners/Applications/Fastening-Systems-for-Solar-Installations/For-roof-systems/c/SOLAR_FASTENING_SYSTEMS_ROOFING
William Miller
www.millersolar.com
> On Oct 17, 2020, at 7:53 AM, Jay wrote:
>
> What do people recommend for a metal roof ( with flat section
Jay,
I researched this years ago, so I have no specific figures for you such
as pullout strength, only the general lesson that I learned. The pullout
strength of Tek and similar self-tapping screws is surprisingly high,
especially in the larger diameters, such as #14, which equates to 1/4"
as
What do people recommend for a metal roof ( with flat sections, not
corrugated)on 3/16” thick x 2” wide C channel for attaching L feet
Self taping fasteners would be the easiest. Doing a nut and bolt would be
possible but quite time consuming.
A machine self taping bolt and then adding a nut wo
10 matches
Mail list logo