Visit with a friendly pilot and look at some of those nice publications the
FAA puts out that shows the patterns to fly around individual airports. A
friend showed me some of these a while back. With figure-8s, ovals,
symetrical, and non-symetrical patterns, and considering any unique terrain
Hi all not sure if this is the place to post this or
not, but I'm sure Kevin will let me know...:)
I have 4 each MSR-2000 repeaters model # C74G9B-3105AT
for sale, each repeater has all cards configured for
the above model number.
If interested email myself off the list.
Location is San Jose,
Since we're talking about plug in cards for the Mastr II station, where does
one acquire the edge connectors that will mate with the cards? GE used dual
7-position connectors (2 or 3 depending on the card). However, Digi-Key
doesn't list anything with the right connector count (no 7-position, no
Still getting 3 of each post been going on all day.
It started this AM when my new E-mail address finally kicked in at
yahoogroups.
Old address [EMAIL PROTECTED]
New address [EMAIL PROTECTED]
It is at the verizon address I am getting triples.
Thanks for any relief.
Ted
funny-I'm getting
Still getting 3 of each post been going on all day.
It started this AM when my new E-mail address finally kicked in at
yahoogroups.
Old address [EMAIL PROTECTED]
New address [EMAIL PROTECTED]
It is at the verizon address I am getting triples.
Thanks for any relief.
Ted
Yahoo! Groups
Yes he did mention it, I need to get the heat hooked up again after this
addition madness hope to complete all that by the first of the week. Then I
can get back to my Cobra and playing with Repeaters. You know, the stuff a
retired guy is supposed to do.
I did get it 3 times but I will only
Works fine here. Must be you PA guys ;-)
Did Wes talk to you about doing some repeater tweaking sometime?
Now, don't tell me you didn't get this message. By rights, you should get it
3 times.
Chuck
WB2EDV
- Original Message -
From: Ted Leonard [EMAIL PROTECTED]
To:
Did I mention there are at 5 school facilities within spitting distance? If
they are low enough to hit that 180 foot tower they have a lot more problems
than the tower to contend with!
Paul
-Original Message-
From: Steve Grantham [mailto:[EMAIL PROTECTED]
Sent: Wednesday, September
I get 'em from old backplanes that are bad,havent seen any elsewhere.
- Original Message -
From: Chuck Kelsey [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, September 29, 2004 9:02 PM
Subject: [Repeater-Builder] Mastr II edge connectors
Since we're talking
Aren't those the white Molex style connectors like what is connecting the
CTCSS board in the Mastr II? Different number of connections but the same
design, right? I got some of those from my local Industrial electronics
house several years ago. I will have to look to make sure or someone else
Does anyone know if the RCH3000 works with the older non astro spectra, (or
just the astro version)like the DGT9000.
I am considering hooking a spectra consolette to the DGT9000 or RCH3000. If
anyone has any type of info on this it would be appreciated...
Thanks
PS any information on the
Totally different
- Original Message -
From: Paul Finch [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, September 29, 2004 11:13 PM
Subject: RE: [Repeater-Builder] Mastr II edge connectors
Aren't those the white Molex style connectors like what is connecting
Hello all,
As of this email I'm at the end of my run at selling
off 75 units of this radio, I have 7 more and don't
wish to list them on ebay or other websites. So I
thought I would offer them here.
The model number is # D44MJA7DA5DK (READING GLASSES ON
MODE).
BOTTOM SELLING PRICE HAS BEEN
Try AMP connectors, they seem to have any connectors
I've looked for in the past.
Regards, Barry
--- Q [EMAIL PROTECTED] wrote:
I get 'em from old backplanes that are bad,havent
seen any elsewhere.
- Original Message -
From: Chuck Kelsey [EMAIL PROTECTED]
To:
Hello, if you have any of the Maxtracs left I'd be interested in 2 of
them.
Thanks,
Steven Passmore, KF6FKK
- Original Message -
From: [EMAIL PROTECTED]
To: repeater-builder@yahoogroups.com
Sent: Wednesday, September 29, 2004 9:08 PM
Subject: [Repeater-Builder] Maxtracs 300
Hello
hi,a kind person toll me that i can found
that 3 tones sound in a cat 250 unit, i have contacted the company about
cat 250 panel, but they say that cat 250 is not a repeater panel and they don´t
have the 38 analog tones and the 50 digital tones that i need in my
comunity repeater,
(
Has anyone noticed lately that this list has been very slow to process
messages? It seems like it takes about a day for messages to post!
That is really poor performance.
:(
Yahoo! Groups Links
* To visit your group on the web, go to:
Where is the best place to get the software for the R100 repeater from?
Looking but cant find it anywhere.
Dakota
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.766 / Virus Database: 513 - Release Date: 9/17/2004
Hello all me and a buddy wer talking and sounthing came up. Does anyone by
any chance no what the hiest elavation repeater is or was in the us?. 2m ,
70cm what ever thanks alot for the help in answering my strange question
73
Doug Strobel kb3ham
Yahoo! Groups Links
* To visit your
You were subscribed three times. I deleted two of them.
Mike WA6ILQ
At 06:17 PM 9/29/04, you wrote:
Still getting 3 of each post been going on all day.
It started this AM when my new E-mail address finally kicked in at
yahoogroups.
Old address [EMAIL PROTECTED]
New address [EMAIL PROTECTED]
Nope its not you I have been getting them from all my groups. Even the
ones that I own and run.
Dakota
-Original Message-
From: Q [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 28, 2004 4:56 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] duplicate posts
Is
not on my end, might be your provider is getting
filtered.
--- JOHN MACKEY [EMAIL PROTECTED] wrote:
Has anyone noticed lately that this list has been
very slow to process
messages? It seems like it takes about a day for
messages to post!
That is really poor performance.
:(
At 06:36 PM 9/29/04, you wrote:
Still getting 3 of each post been going on all day.
It started this AM when my new E-mail address finally kicked in at
yahoogroups.
Old address [EMAIL PROTECTED]
New address [EMAIL PROTECTED]
It is at the verizon address I am getting triples.
Thanks
As I stated a few times here I have a duplexer that has been giving me
desense. To get rid of the desense I turned down the TX power until it went
away because the duplexer is rusty and hasn't been messed with in 20+ years.
I came across another duplexer in a base station cabinet we had and
lol:)
--- Mike WA6ILQ [EMAIL PROTECTED] wrote:
You were subscribed three times. I deleted two of
them.
Mike WA6ILQ
At 06:17 PM 9/29/04, you wrote:
Still getting 3 of each post been going on all day.
It started this AM when my new E-mail address
finally kicked in at
yahoogroups.
Tim, a couple of questions come to mind.
1.) Are you trying to tune a T-band Duplexer down to
440? Not reccomended.
2.) Are you running a circulator between the duplexer
and the antenna?
3.) Are you using the same cables out of the repeater
to connect to the duplexer (either one) and seeing a
The HIGHEST repeater I can think of would be in Colorado, or the Rocky
Mountain chain somewhere. I'm sorry this doesn't answer your question,
but I bet it helps others understand what the question is. :-)
Of course, an OSCAR unit would be the highest repeater, but that's not
just limited to the
Yeah;
Thats something that was never mentioned in any ham radio exams.
maybe someone should submit an article to the ARRL for the QST Mag.
MH
- Original Message -
From: Steve Grantham [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, September 29, 2004 7:46
Then you get 3 X the moneys worth :-)
GR8 Bargin.
MH
- Original Message -
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, September 30, 2004 3:02 AM
Subject: Re: [Repeater-Builder] Still getting triple posts
lol:)
--- Mike WA6ILQ [EMAIL PROTECTED]
On Thursday 30 September 2004 02:16 am, Tim S. wrote:
However, I put the service monitor on the PA output and
read 42 watts. Hooked the cabling up to the duplexer and
then checked the output of the duplexer and only read 22
watts. That's like a -2.8db loss.
What is the SWR looking into the
Say Tim;
If you have all of that rust it seems like besides high
resistance for proper contact wouldn't it cause some sort of leakage for
that desense problem, as well radiate some percentage of interference ?
even though you turned the power down, I was wondering how much work it
Like I said I would have to look, my error.
-Original Message-
From: Q [mailto:[EMAIL PROTECTED]
Sent: Wednesday, September 29, 2004 10:32 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Mastr II edge connectors
Totally different
- Original Message -
And that is slow? Try three to four days for e-mail.
Ed
JOHN MACKEY wrote:
Has anyone noticed lately that this list has been
very slow to process
messages? It seems like it takes about a day for messages to
post!
That is really poor performance.
:(
Yahoo! Groups Links
*> To visit your group
At 12:09 AM 9/30/2004 -0700, you wrote:
Tim, a couple of questions come to mind.
2.) Are you running a circulator between the duplexer
and the antenna?
--???
Ken
--
President and CTO - Arcom
I would say look into Zetron
model 38 or high end 48
John
- Original Message -
From:
DIGITEL
S.A.
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, September 28, 2004 9:39
PM
Subject: Re: [Repeater-Builder] nice 3
tones courtesy beep(repeater
WE HAVE A COUPLE OF MASTR PRO RACKS AND THEY USE THE SAME CONNECTORS. $25 EA + SHIPPING. ( AND YES I AM SHOUTING,,,MY HEARING IS GOING SO I HAVE TO)
MDM RADIO LTD 708-681-0300
Ted Bleiman K9MDM
MDM Radio Ltd - 1629-B N. 31 st Ave Melrose Park, IL 60160 708.681.0300 fax 708.681.9800 web
I did a search on the Digi Key web site and came up with no manufacturers
having the correct pin counts. Did you go and look and find something else
that I missed?
Chuck
WB2EDV
- Original Message -
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, September
My received E-mail says you sent it at 8:36 ( or
the server received it) and I received it at 8:37
That tis not to bad - All of mine seem to show in
the next minute or two at most.
Dave // NØATH
- Original Message -
From: Paul Finch [EMAIL PROTECTED]
To:
I too am a pilot and that must be the standard question for a CFII to ask, I
didn't think of something as quick as that, mine was something like practice
flying a glider?
- Original Message -
From: N9WYS [EMAIL PROTECTED]
Date: Thursday, September 30, 2004 10:56 am
Subject: RE:
I realize I can try both to see which I like, but I thought I would
ask which audio inputs and outputs people are using on this repeater,
audio or data?
Looks like data input is designed for PL/DPL and may not work. I
heard someone mention that the audio sounds thin on this repeater so I
thought
If you look at the schematics you will see that the data input has a low
pass filter and you'll have horrible audio. We never had a problem using
the proper audio inputs on these repeaters they sound very flat and natural.
Make sure you have the drive levels in the proper range and are not
At 03:58 PM 9/30/2004 -, you wrote:
I realize I can try both to see which I like, but I thought I would
ask which audio inputs and outputs people are using on this repeater,
audio or data?
---The TKR-850 uses DSP for just about everything to do with audio.
Unfortunately, the deemphasis curve
At 11:11 AM 9/30/2004 -0500, you wrote:
If you look at the schematics you will see that the data input has a low
pass filter and you'll have horrible audio.
Also, if you have PL/DPL encode programmed internally to the repeater,
the external data input won't work anyway.
Ken
Comments within...
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Tim, a couple of questions come to mind.
1.) Are you trying to tune a T-band Duplexer down to
440? Not reccomended.
No I am not trying to make it go to ham band. I maintain a private tband
-Original Message-
From: Paul Kelley [mailto:[EMAIL PROTECTED]
What is the SWR looking into the duplexer?
Did not check that. What should it be? I assume 10% or less reflected.
Have you tried
different length cables from the transmitter to the
duplexer and looked to see if the power
Lo que deseas y mucho mas lo puedes tener con el
controlador
RI-300y lo puedes ver en el siguiente link:
http://www.pacres.com/rpt_controller.htm
Espero te sirva la informacion.
Juan
- Original Message -
From:
DIGITEL
S.A.
To:
The Zetron only does a one-beep CT, doesn't it?
He said he has a Zetron now. (or a TP-154)
Joe M.
Maire Company [EMAIL PROTECTED] wrote:
I would say look into Zetron model 38 or high end 48
John
- Original Message -
From: DIGITEL S.A.
To:
I have hooked up several TK-750, which I think are the
same audio-wise as the 850. The TD and RD ports are
flat audio (discriminator and modulator type), and
the TA and RA ports are emphasised (mike and speaker
type audio). The TA and RA are HP filtered to
eliminate PL.
Choose whichever one
John,
I sent this at8:35 AM Thursday morning but the point is the group could be
in the moderated mode.
Paul
-Original Message-
From: JOHN MACKEY [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 28, 2004 7:29 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Slow
Tim S. wrote:
-Original Message-
From: Paul Kelley [mailto:[EMAIL PROTECTED]
What is the SWR looking into the duplexer?
Did not check that. What should it be? I assume 10% or less reflected.
4% is 1.5:1 (100W out - 4W back OR 50W out - 2W back)
It should be no more at the TX
Attention: Mike, WA6ILQ, Gary, K2UQ, and Randy, W0AVV
Hello All:
We finally took the 220 antenna apart, and it was an education. I would
like to share our experiences with you.
First, depending on the vintage of the antenna production, these
antennas may be assembled and disassembled
Thanks Joe.
I'll check that out.
-Tim
-Original Message-
From: mch [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 30, 2004 10:44 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] The duplexer story...
Tim S. wrote:
-Original Message-
From: Paul
Hey
Paul,
Maybe you could help
Charlie,
This is right in West
Chester.
Read
Below,
73
Russ,
THIS IS A QST FOR HELP!
Please get it out on your list
severs,
nets and news letters.
Hello all who help with public service!,
We need help on 12/05/04 for Brains Run. The event is back to
Hello All,
Sorry! I clicked the wrong repeater
in my e-mail list!
Please disregard!
I will send to Paul
direct.
Very best of 73,
Russ, W3CH
- Original Message -
From:
russ
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, September 30, 2004 5:19
PM
Subject:
What is the SWR looking into the duplexer?
Did not check that. What should it be? I assume 10% or
less reflected.
Ideally it should be not much higher than the antenna SWR,
but even if SWR into the duplexer is low, duplexers can
look reactive and cause some PAs to act up. And even a
55 matches
Mail list logo