They want the input to be high enough so limiting
occurs after the low-pass filter. That seems to happen
with their test signal of 100mV RMS input, so your
800mVP-P (around 280mV RMS) is more than sufficient.
There may not be a maximum limit, but I can't see any
radio's discriminator output
Don Kupferschmidt wrote:
Hi to all list members,
I need to renew my father's amateur radio license shortly.
Has anyone on the list used fcc.gov, been able to navigate through it,
and successfully renewed their license?
How easy / hard is it? Does anyone out there have a step by
Hello
I recently purchased a Qunatar with the sam option, station access
module. I was wondering if any body here had any information about the
sam?. I cant find the sam option in the rss, It has a seperate RS232
port on the front of the sam. Im not sure if it has is own program or
not. Any
--- In Repeater-Builder@yahoogroups.com, allan crites [EMAIL PROTECTED]
wrote:
Sounds like what im looking for but the shipping would be to great. I
live in N.C. near Charlotte, this antenna breaks down into 2 - 10'
sections. I found out UPS will not ship it and that means it would
have to go
Matt
Can I reserve 3?
Thanks
Paul VK3XDE
--- In Repeater-Builder@yahoogroups.com, DCFluX [EMAIL PROTECTED] wrote:
Scratch that, I have 3 tubes making 45 of 1420P, and I have about 20
of the 2575P
On 3/31/07, DCFluX [EMAIL PROTECTED] wrote:
Looks like Digikey turned them into a special
tomnevue wrote:
I bought a Sinclair Q202G 4 can VHF duplexer. The previous owner
clearly spent a lot of time playing with the variable capacitors. 2 are
totally ruined and I suspect the other 2 are damaged because I can't
get a notch depth below 60db and it's not stable. These are
N3DAB - 6
W5RAB - 4 - Sent
KG4TQE - 2
W2MN - 4
KB9WLC - 2
K5JS - 1
WB4UIV - 2
W5DK -2
WB2FYZ - 2
W2UA -1
WB7PEK - 5
KB0STN - 1
VK3DXE - 3
KC7GSA - 5
About 5 left.
W0RFX - 4 (ISD2575P)
Thanks Bob
Now that I look at the circuit more I am sure you are right.
I was getting some false decode with no PL on the input signal and
thought it might be keying on too much signal.
I'll take it from here.
Again Thanks
Gran K6RIF
At 11:19 PM 4/4/2007, you wrote:
They want the input
Motorola introduced the Station Access Module [SAM] as an option for
the CXB MSF5000 stations. Programming capability for that option was
incorporated into the MSF5000 RSS.
The SAM option was subsequently added to the Quantar station's
capability, however, the Quantar RSS cannot program the
Chuck - try contacting David Jones K4DLJ at k4dlj At bellsouth dot net. He
is in your general area and does tower work. He may have some pulls that would
suit your needs. He is a little slow to reply because of his work but maybe
someone else on the list has a phone no. or you can look him
How many of you are using a DCI filter of some sort in front of your
repeater receiver or duplexer and what are your before/after
observations?
Chuck - Try David Jones K4DLJ he is in your general area and does
tower work. E-mail k4dlj at bellsouth dot net or look him up QRZ dot
COM and see if you can find a tele. no. for him in the white pages.
He may have some tower pulls that will meet your requirements. I
pick up a clean DB224E
Tony L. [EMAIL PROTECTED] wrote:
How many of you are using a DCI filter of some sort in front of your
repeater receiver or duplexer and what are your before/after
observations?
Hi Tony,
I have at least one of every common model DCI Filter and a pretty
large number of custome made DCI
Ray,
I think I have a few in storage. I will need to go check it out. Right now
it is snowing like crazy here in Western PA (Damned Ground hog anyhow!!)
I will try to look for one for you in a few hours.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
612 Barnett Rd
Boswell, PA 15531
-
The orignial TS-32 paperwork has typical scope displays, which
are a very nice reference source. The install paperwork is one of
the better docs I've seen for this type of equipment.
s.
At 11:19 PM 4/4/2007, you wrote:
They want the input to be high enough so limiting
occurs after the
N3DAB - 6
W5RAB - 4 - Sent
KG4TQE - 2
W2MN - 4
KB9WLC - 4
K5JS - 1
WB4UIV - 2
W5DK -2
WB2FYZ - 2
W2UA -1
WB7PEK - 5
KB0STN - 1
VK3DXE - 3
KC7GSA - 5
N3XCC - 3
Offer Closed for ISD1420P as supplies are exhausted.
W0RFX - 4 (ISD2575P)
Hello Tony and All
DCI filters are very good filterskind of big for a receiver alone but they
do work very well. I have one in front of a 2 meter Icom 900 module that I use
for remote base linking. It is about 30 feet from a 200 watt paging transmitter
and our omni antennas are about 20
Terrific. Thank-you.
vern
This is great. I like that it also includes the information on the
other parts of the controller(s); even the older ones.
Thank-you.
vern
I have one on the receive side of my 900 MHz repeater, whose antenna is at an
industrial site, up over 300 feet overlooking North Dallas. No unwanted
signals noted. Wish I had more wanted signals though (aka ham activity)!
Roger W5RD
From: Tony L. [EMAIL PROTECTED]
Date: 2007/04/05 Thu AM
UPDATE: I have an operational test setup working using the Wavetek
1080 (sweep/marker generator), oscilloscope, RF detector, and a couple
50 ohm terminators. With them I was able to successfully reset the
band-pass on the individual cavities I am using for the duplexer.
All I have left to do
How about shipping only the dipoles and harness, you keep the pipe the dipoles
are mtd. on?
Allan WA9ZZU
chuckmf1135 [EMAIL PROTECTED] wrote:
--- In Repeater-Builder@yahoogroups.com, allan crites [EMAIL
PROTECTED]
wrote:
Sounds like what im looking for but the shipping would be to
Ray,
I was able to find three 25W VHF MVP mobiles. I tested them and came up with
2 that are in working order. These radios are USED!! They are not pristine,
but for most repeater shelters, I guess it doesn't really matter what they
look like, as long as they work.
These are in the 150.8-174
Congrats Vern
May I ask you...what are you using for an RF detector? I'm in need
and can't find any info on the subject.
Thanks
Bob, GMRS WPVV845, Amateur KG4WAD, LMRS WPXC892
--- In Repeater-Builder@yahoogroups.com, w6nct [EMAIL PROTECTED] wrote:
UPDATE: I have an operational test
Scott,
One will do nicely for me.I have one now,and just needed a spare
for the repeater.I looked online,and couldnt find any,so I decieded
to ask the masses here.
Ray
--- In Repeater-Builder@yahoogroups.com, Scott Zimmerman
[EMAIL PROTECTED] wrote:
Ray,
I was able to find three
Scott - I'll take the other - email me your phone
number and I'll call to make arrangements.
Charles
KS3Z Email: [EMAIL PROTECTED]
--- Ray [EMAIL PROTECTED] wrote:
Scott,
One will do nicely for me.I have one now,and
just needed a spare
for the repeater.I looked online,and couldnt
Ray,
One you shall receive if you send a Money Order (preferred) to the address
below, or PayPal is O.K. sent to [EMAIL PROTECTED] I would appreciate it
if you throw in a couple of bux to offset the fees though (I hate those
damned PayPal fees!!)
I would guess $10 would get it shipped to you,
I know, I know, the title alone is enough to spark debate.
Like it or not, I need to adjust the ID setup on one. I found the pitch,
speed and level on the ID board, but I don't get the time between ID's. I
moved the other two pots a bit, now the damn thing id's every 3 minutes or
so. If I
28 matches
Mail list logo
