The WX-200 is excellent, using that one here with 125 watt transmitter and
no decense at all. I'm sure it can be adapted to many other controllers, as
all it does it separates the transmits and feeds the audio out.
Mathew
-Original Message-
From: KA9QJG [mailto:[EMAIL PROTECTED]
Look at the troy radio boxes, they may be pricy but mine has served me well for
many years.bob
___
Speed up your surfing with Juno SpeedBand.
Now includes pop-up blocker!
Only $14.95/month -visit http://www.juno.com/surf to
I am connecting a MCC RC-1000V (Voice Option) controller to a Maxtrac
receiver on the main receiver input.
I have the Maxtrac programmed for a low output on PL receive.
I have verified this is working.
I have the signal from the Maxtrac connected to pin 6 on the DB 25.
I have verified P3 pin 7
I have a surpluse [80+] of Motorola # TDE7230A made by Decibel
Products, mod# DB404[406-420MHz.]
All antennas are new in box with test spec sheet,including N male
termination and mounting hardware.
These antennas list for $343 each. Reasonable offers considered.
Referrals
I am referring to my General Class Radiotelephone License ...
got it as grandfathered because I went to renew my 2nd Class
Radiotelephone License.
Neil
C. Wayne Schuler wrote:
Neil:
Are you aware that you can get a replacement license from the FCC?
From the online filing
Steve,
Good luck with your RC1000v, I've had good results from those over
the years.
I've got my 1000v schematic out and there is an NPN transistor 'Q9'
between P3-7 and U1-17 (and it has the current limiting 20k R51 on
it's base in series with P3-7-- and a pullup 20k R50 to +5 at the P3-
Just pick up a Micor or MASTR II. With the front end of those tuned to
162 MHz (or even 152 MHz) it will never see your 2M repeater. Or, use a
set a front end out of one. For a real sweet WX radio, just interface a
standard alert RX SAME decoder to the MASTR II or Micor and crystal it
up for your
John,
Thanks for the quick reply.
And, thanks to your detailed description, I'm up and running.
R51 was not installed on the board. It looked like he was inverting
the signal, but I could not be sure. There are no values in the
silkscreen.
The board I have is RC-1000V Rev I.
I hope this helps
Yes ... and no ...
Mike Morris WA6ILQ wrote:
... snip ...
better RX (in his case a Micor). The high range
Moto RXs (160-174MHz) are pretty useless for ham
radio but work just fine on 162.55
If you are going to modify your 162-174 MHz Micor Receiver to
the 2 meter ham band
I know a liitle off topic, my apologies, but I am looking for a 100'
to 120' self suppoting tower, can be medium duty, only going to hold a
small antenna somewhere near the NW Indiana area. Needs to be on the
ground, and best possible price around $500.00 as budget is tight.
Thanks. Email
Thanks for the update. When I was president of the Cincinnati FM Club and we
inquired of Federal Officials we were told absolutely NOT to retransmit NOAA
weather broadcast which is why we set up the system that we had, and still
have. I have talked to several other system operators around the
I looking for a substitute ic for U901 in the Mitrek transmitter cct. The
ic is a
M2170 and is a 8 pin op amp. Any body got a suggestion??
Thanks
Doug VE5DA
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To
Anyone know which uhs preamp this is for. Vhf, or Uhf ? Thanks..
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is
Hall Electronis says that it's UHF
19C320208G6 PB SWITCH ASM N/A 1 19C320209G1 MOD KIT ALERT TONE N/A 1 19C320215G1
UHS PRE AMP N/A 1 19C320215G2 UHS PREAMP N/A 1 19C320219G1 TOP HOUSING ...
73 John VE3AMZ
- Original Message -
From: knightdriver20042004 [EMAIL PROTECTED]
To:
How long ago was that? The rules were changed around 10 years ago (maybe
a little more). Maybe when you asked that WAS the case. No debate - just
stating a fact.
Joe M.
Steve Helton wrote:
Thanks for the update. When I was president of the Cincinnati FM Club and we
inquired of Federal
--- In Repeater-Builder@yahoogroups.com, Doug [EMAIL PROTECTED] wrote:
I looking for a substitute ic for U901 in the Mitrek transmitter cct.
The ic is a M2170 and is a 8 pin op amp. Any body got a suggestion??
Motorola On Line
At 07:18 PM 4/3/2005, you wrote:
--- In Repeater-Builder@yahoogroups.com, Doug [EMAIL PROTECTED] wrote:
I looking for a substitute ic for U901 in the Mitrek transmitter cct.
The ic is a M2170 and is a 8 pin op amp. Any body got a suggestion??
I have to say it was a while ago but apparently no one currently responsible
for the system checked into it since they are still operating under the same
understanding. Be that as it may I still like what we did with the system
with the multiple changeable PL tones and the three different tail
You might go through the vehicle installs forum at batlabs,
http://batboard.batlabs.com/viewforum.php?f=8
SP
- Original Message -
From: georgiaskywarn [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, April 02, 2005 2:43 PM
Subject: [Repeater-Builder] OT Pics of
TLN1552A Test meter supposedly for a
Micor. Has a Mic, spkr, multiposition switches and a meter. Anyone
know if this would be used to tune up a Micor mobile?
Thanks!
K4RJJ
Yahoo! Groups Links
To visit your group on the web, go
20 matches
Mail list logo
