Hi Larry and all,
There is a problem. Can you try again please and this time send your email
at my gmail account. (k6irf73) @ (gmail.com)
73!
tnx guys!
Lot / k6irf
--- In Repeater-Builder@yahoogroups.com, "larryjspamme...@..."
wrote:
>
> Hi Lot - no emails received from you at any of my
Sorta related...
Does anyone have any High Band (VHF) Maratracs with blown PAs? I'm
looking for some cheap ones for an experimental project. The only
requirement is that the RF and logic decks work. The amp and power
interface board need not work. Actually, I don't even need the frame.
Joe M.
Tom,
Please contact me direct (off the group) or change your email filters to
allow incoming replies.
Thanks,
Gary
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Thomas Oliver
Sent: Thursday, April 08, 2010 5:42 AM
To: Repea
Just look for auctions from Monmouth County NJ. All I do is to remove the
crystals and send them onto the auction lot. GOD knows what happens after they
get to the auction lot. The are tuned to 37.94 and even still have the PL board
attached (5Z).
The cables and mics are very well used, but the
I and a fellow ham (the site is a favorite) hope there can be a resolution of
this issue.
Sorry if this is a burden!
I would recommend that at least all Windows users not visit the site until this
is cleared up.
More info?
73, AC8FD
--- In Repeater-Builder@yahoogroups.com, Jim wrote:
>
>
If running on a *NIX variant, --- grep -r "imgdownload.com" * ---
(drop the "-"s leading and trailing) from httproot should drill down
and find any content linked to that domain.
73-N5VFF/Brian
On Thu, Apr 8, 2010 at 1:14 PM, DCFluX wrote:
> Sorry it does not specify where it saw that link.
Hello All . This is what I have found regarding this issue. Hope this may
help. Tom VE1TA
Advisory provided bySafe
BrowsingDiagnostic page for imgdownloads.comWhat is the current listing status for
imgdownloads.com?Site is listed as
suspicious - visiting this web site may harm your computer.Par
Well Kevin as Usual You and the people who run this very helpful group were
right on top of this from the beginning and did a Great job of resolving the
Problem
It is appreciated by all
Happy Repeater Building
Don KA9QJG
PS Sometimes in life We do not miss things until they q
So, here is the conclusion to today's events following the supposed
repeater-builder.com site hack.
We have processed your request for review of your website,
http://repeater-builder.com/. At this time, none of our data partners
are reporting badware activity related to the site. Any warnings
OK, Micor was the subject line of what you were talking about, so
I jumped to the conclusion that you were talking about Micors.
Yea, the Micom and earlier HF equipment by moto did use the "A".
-- Original Message --
Received: Thu, 08 Apr 2010 02:49:01 PM PDT
From: Mike Morris WA6ILQ
To
This has happened before with Google. Wait a while and check it out. It's
a mess up in their programs on the google site.
Chris Hodgdon - KE5IGO
Emergency Coordinator
Kaufman County ARES, Inc.
Chief
Southern Search & Rescue, Inc.
Kaufman County CERT, Inc.
Duly noted on not lifting the boards unless you know exactly what you are
doing. I don't quote anyone on any of our units unless IM absolutely certain.
The fact that you wouldn't pay 5 bucks for these says a lot about these.
Thanks again, both of you, for your sagely advice. What mountaintop ca
The short version is lower power than the tall one. 7.5v @ 600ma on short one,
10.8v pack on longer version.
Dip switches are for pl tones only. Correct on units being crystal. Agree with
you on ebay; I would'nt pay $5 bucks!
44 pretty sure is UHF @ 4 w, short 1w ? (do not quote me on this; thre
The dip switches are for programming the PL/DPL board only
From: La Rue Communications
To: Repeater-Builder@yahoogroups.com
Sent: Thu, April 8, 2010 5:10:00 PM
Subject: Re: [Repeater-Builder] Motorola Radius P50
Thanks Bill, am I to assume that the dip sw
Thanks Bill, am I to assume that the dip switches under the plate in the
battery compartment are for a whole other function other than programming, or
are those a part of the PL / DPL boards that I see?
John Hymes
La Rue Communications
10 S. Aurora Street
Stockton, CA 95202
- Original Mess
It's a 4-watt UHF carrier squelch radio. Uses crystals Short ones are 2-watt
units. PL or DPL boards fit under the plate in the battery compartment.
From: La Rue Communications
To: Repeater-Builder@yahoogroups.com
Sent: Thu, April 8, 2010 2:18:10 PM
Subject:
I never said "Micor", John, you did a nice job of jumping
to conclusions.
The comment thread diverged to a generic discussion
of part number prefixes, and I said "A" (as in TLA-)
was under 25mhz and then I said that the first I ever saw
was a carrier current tone-and-voice in-plant paging
syst
Sounds like the PLL is out of lock on that band
On Thu, Apr 8, 2010 at 1:39 PM, Lee Pennington
wrote:
>
>
> Hi guys,
> Since I can't address the site, I'd like some info into solving a
> problem with my 10 M beacon: Realistic HTX 100
> It's been on the air flawlessly and continuously, (2
Here's what Google tells me about this site:
Quote:
Safe Browsing
/Diagnostic page for/ repeater-builder.com
*What is the current listing status for repeater-builder.com?*
Site is listed as suspicious - visiting this web site may harm your
computer.
Part of this site w
A Micor for carrier current paging at about 60 KHz??
never heard of such a thing. Please tell more???
-- Original Message --
Received: Thu, 08 Apr 2010 12:12:04 PM PDT
From: Mike Morris WA6ILQ
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Motorola Micor Part TCN13
Repeater-Builder site works fine under Netscape 7.0, no problems
John
Wayne Leake wrote:
I tried accessing http://repeater-builders.com/ and
http://www.repeater-bulders.com/ with the latest IE under win XP, and
had no problem
Firefox and K-Melon both take me to a web page that suggests
I tried accessing http://repeater-builders.com/ and
http://www.repeater-bulders.com/ with the latest IE under win XP, and had no
problem
Firefox and K-Melon both take me to a web page that suggests the
URL may be for sale.
I had a problem, for a very short time, with one hoster, that took a web
Hi guys,
Since I can't address the site, I'd like some info into solving a
problem with my 10 M beacon: Realistic HTX 100
It's been on the air flawlessly and continuously, (28,2883 Mhz @ 5W) for
several years. About a week ago I turned it off to get in on a little 10
meter DX, myself. Upo
Nate - Thats precisely why I love my Mac. :)
John Hymes
La Rue Communications
10 S. Aurora Street
Stockton, CA 95202
- Original Message -
From: Nate Duehr
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, April 08, 2010 1:26 PM
Subject: Re: [Repeater-Builder] Problems reach
--> Mac OSX 10.6.3 and Safari 4.0.5 displays a full-screen warning for the main
page www.repeater-builder.com -- and allows you to "ignore warning" or "go
back" to the previously visited URL.
The warning box includes a link to Google's "Safe Browsing" website which is
where the false alert seem
Sorry it does not specify where it saw that link.
On Thu, Apr 8, 2010 at 12:10 PM, Mike Morris WA6ILQ wrote:
> Do you know which photo in which article?
>
> Mike WA6ILQ
>
> At 11:53 AM 04/08/10, you wrote:
>>According to the why page:
>>
>>Malicious software is hosted on 1 domain(s), including im
I have my built in protection enabled. None of it gave me any warning.
Curious...
John Hymes
La Rue Communications
10 S. Aurora Street
Stockton, CA 95202
- Original Message -
From: Brian Raker
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, April 08, 2010 12:56 PM
Su
It's for a Motorola R2002B Service Monitor
Tim
I'm seeing it as well, 3.6.2. It is the 'protection' screen that is built
into Firefox, and not for any AV or firewall programs.
Seems its chief complaint is:
*What happened when Google visited this site?*
Of the 3 pages we tested on the site over the past 90 days, 2 page(s)
resulted in malicio
Oops, sorry guys, I just replied to Mort... I meant
to do it to his own e-mail.
Sorry.
Tim W5FN
Two questions on this unit.
1) Does anyone know the nomenclature for this? I have checked out several
different versions, including one that was built for assignments dated after
3/10/02. I tried to check it out with it, however, it doesnt match up when it
came to the power level code. So I sc
Awesome Mike! Thank you!
John Hymes
La Rue Communications
10 S. Aurora Street
Stockton, CA 95202
- Original Message -
From: Mike Morris WA6ILQ
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, April 08, 2010 12:09 PM
Subject: Re: [Repeater-Builder] Motorola Micor Part TCN13
A = under 25mhz... the first I ever saw was a carrier
current in-plant paging system at around 60KHz.
B=25-50, usually 30-50 but I've seen a few radios in the 26mhz range.
C=66-88, originally 72-76Mhz
D=132-174, originally 136-172, but some product
lines were limited to 150.8-172 or 174
E=395-525
Do you know which photo in which article?
Mike WA6ILQ
At 11:53 AM 04/08/10, you wrote:
>According to the why page:
>
>Malicious software is hosted on 1 domain(s), including imgdownloads.com/.
>
>Sounds like its angry because of a picture in an article is hosted there.
>
>On a related note our 8e6
According to the why page:
Malicious software is hosted on 1 domain(s), including imgdownloads.com/.
Sounds like its angry because of a picture in an article is hosted there.
On a related note our 8e6 web filter here at the shop 8e6 also
classifies imgdownloads as "malicious/virus"
Well for what it is worth...no upgrades etc but get the
warningsomething is amiss...
D
On 08/04/2010 18:20:22, ka9qjg (ka9...@wowway.com) wrote:
> I do not know if it related But a few days ago I upgraded to Goggle
Chrome
> and I have had nothing but problems including this ever since, I
I do not know if it related But a few days ago I upgraded to Goggle Chrome
and I have had nothing but problems including this ever since, I did the
Add and remove for that then My shortcuts would not work . I know nothing
is wrong with this site so I just click OK
Don
KA9QJG
Fr
When I went to it with the latest Firfox, there was a link in the corner
that said something like 'ignore this warning'. click on it and it takes
you to the RB page with a red bar across the top. you can then click a
button and tell it that this page isn't a threat. Doesn't remember it
though.
I have a Low-Split Maratrac (10 Meters) with a blown front end
(and I do mean fried ... looks like someone transmitted into it).
Do you have any Low-Splits with a blown Transmitter I can salvage
the receiver board from ?
Thanks, Dick, W1KSZ
-Original Message-
>From: Thomas Oliver
>S
--- In Repeater-Builder@yahoogroups.com, Kevin Custer wrote:
>
> La Rue Communications wrote:
> > Right on Kevin -
> >
> > Thanks for staying on top of this. I checked all my browsers, I have
> > about 10 on both my Mac and PCs and got no errors.
>
> Warning page redirects are only hap
I found the schematic yesterday and found that PIN 14 is XMIT PL INHIBIT and
PIN 5 is PL INDICATOR. Now the TX PL is active only on valid PL on the receive
side !!
Thank's to all who helped me. I appreciated.
Eric VE2TSO
--- In Repeater-Builder@yahoogroups.com, "kk2ed" wrote:
>
> I believe Pin
TLF is 800/900. TLE is UHF, TLD is highband, TLC is midband, TLB is
lowband...
> -Original Message-
> From: Repeater-Builder@yahoogroups.com
> [mailto:repeater-buil...@yahoogroups.com] On Behalf Of La Rue
> Communications
> Sent: Thursday, April 08, 2010 12:08 PM
> To: Repeater-Builder
Hi Lot - no emails received from you at any of my email addresses, home or
work. Also, you seem to be having a problem receiving them, even from different
sources. I don't know what to tell you...
Larry
-Original Message-
From: Lot
Sent: Apr 7, 2010 10:25 PM
To: Repeater-Builder@yah
La Rue Communications wrote:
Right on Kevin -
Thanks for staying on top of this. I checked all my browsers, I have
about 10 on both my Mac and PCs and got no errors.
Warning page redirects are only happening to people that have or use
(subscribe to) Google add-ons and similar software. The
Good suggestion, I might try that. I was under the impression that the part
number starting with TLF was indicative of an 800MHz part. Now Im gonna need
to try to confirm whether its 800 or UHF. :)
John Hymes
La Rue Communications
10 S. Aurora Street
Stockton, CA 95202
- Original Message ---
They appear to be tripler / 2W amplifier sections from the Micor
station. Possibly UHF.
If its like the 2W UHF version you can disconnect and sweep the filter
that is attached to the lid with a spectrum analyzer and that will
tell you what frequency it is for.
On Thu, Apr 8, 2010 at 8:23 AM, La R
Right on Kevin -
Thanks for staying on top of this. I checked all my browsers, I have about 10
on both my Mac and PCs and got no errors. Let me know if you need beta testing
done, as I have done a lot of web development beta testing over the years.
Cheers!
John Hymes
La Rue Communications
10
Kevin,
I'll repost this at AR902MHZ reflector - hopefully it'll help them
understand what is going on.
Sorry for the extra headaches...
73,
Mark - N9WYS
-Original Message-
From: Repeater-Builder@yahoogroups.com On Behalf Of Kevin Custer
I got several personal emails about not being ab
Checked on 3.6.3 with no reports. Must be the virus protection software and not
the page itself. If virus protection programs detect a string of code that was
specifically brought up in the past as malicious, regardless if the destination
page is malicious or not, it will be reported as such for
I got several personal emails about not being able to reach the Repeater
Builder site this morning. Google has reported the site has been hacked
and most browsers redirect you to a big warning page. I scanned the
supposed infected pages, http://repeater-builder.com and
http://www.repeater-bu
Still looking for a service / maintenance manual for a Motorola R2008C service
monitor. The power supply in mine went out. Need the manual or copy of one
real bad. thanks, WB2GEU. phone 830-257-9647
Checked with Firefox 3.6.2 with no reports. Updating to 3.6.3 now..What
virus protection do you good folks use?
John Hymes
La Rue Communications
10 S. Aurora Street
Stockton, CA 95202
- Original Message -
From: Jeff Ackerman
To: Repeater-Builder@yahoogroups.com
Sent: Thursd
same here, reported.
On Thu, Apr 8, 2010 at 8:32 AM, James Delancy wrote:
>
>
> I just checked it in Firefox (3.6.3 beta). It is reported as an attack
> page.
>
> James WJ1D
>
>
> http://www.repeater-builder.com/maxtrac/maxtrac-index.html
>
>
Checked it in Google Chrome Browser, no issues here.
John Hymes
La Rue Communications
10 S. Aurora Street
Stockton, CA 95202
- Original Message -
From: James Delancy
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, April 08, 2010 8:32 AM
Subject: Re: [Repeater-Builder] Web
I just checked it in Firefox (3.6.3 beta). It is reported as an attack
page.
James WJ1D
http://www.repeater-builder.com/maxtrac/maxtrac-index.html
Everyone,
Some here may already be aware of this issue, since some of us are also 900
MHz aficionados.
However, I placed a link to the MaxTrac landing page
(http://www.repeater-builder.com/maxtrac/maxtrac-index.html) on the AR902MHz
reflector. I am receiving reports back from members there
Due to the fact the the MDM RADIO web site is temporarily out of service
I have taken the liberty (with your approval I hope)
For Sale PERMACODE PRIVATE LINE FILTERS
BLOW OUT PRICING - 5 FOR $10 PLUS POSTAGE
HUNDREDS AVAILABLE - MOST TONES (NOT ALL)
ASSORTED TYPE ACCEPTABLE - GET AN ASSORTMENT OF
I have several drawer units, no accessories just the radio part. Clean
working pulled from service. These are on 48 MHZ.
Make offer.
tom
ag4uw wrote:
> Hey I am looking for Maratrac low band radios low 29.7 mhz and high 50 mhz
> Must be working and not junk. Let me know what you have an
Like I said I don't know much about them. What would you recomend, how to tune
it, and can I build one?
Thanks,
Kevin
Kc7hgn
--- In Repeater-Builder@yahoogroups.com, n...@... wrote:
>
> At 4/5/2010 19:33, you wrote:
>
>
> >So the answer is YES the
> >
> >
> > >Decibel VHF 6" Repeater cavity fil
> Alternatively, there is a sound card based GMSK modem, that uses a
> Vellman K8055, Serial port, or URI for PTT/COR by Jonathan Naylor,
> G4KLX. See http://groups.yahoo.com/group/pcrepeatercontroller --
> BTW, this design includes a plan for a combined Analog/D-STAR
> repeater as some here t
60 matches
Mail list logo