--- In Repeater-Builder@yahoogroups.com, nj902 wb0...@... wrote:
If you are referring to the 2.5 KHz steps - that's necessary so the radio can
be programmed on whatever frequency is necessary due to the variety of band
plans and channel spacings. That doesn't mean that in any one
--- In Repeater-Builder@yahoogroups.com, Mike Dietrich
m.dietr...@... wrote:
So what everybody is saying isSHOOT ALL THE LAWYERS so we will
all be better off and be able to have repeaters on building
tops ?
Just my 2c worth.
Have a Nice Day !!
Mike
Well, fortunately
--- In Repeater-Builder@yahoogroups.com, Radioman radio...@...
wrote:
Channel 2 may not go off the air on February 18. The entire NPRM is
here:
http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-08-281A1.pdf
Harry, W0OZL
1. The Short-term Analog Flash and Emergency Readiness Act
--- In Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED] wrote:
Hello all from Adam Kb2Jpd
One point some may be missing is that we should not continue to tie up
precious spectrum just so we can continue to use old repeater
technology.
We have a mandate for expiermentation.
in the
--- In Repeater-Builder@yahoogroups.com, Bruce Bagwell
[EMAIL PROTECTED] wrote:
OK guys, along this same line, I have a VHF all copper J-Pole and
plan on building UHF all copper J-pole.
Is common clear lacquer OK to prevent corrosion on the copper
elements? I have used automotive type
--- In Repeater-Builder@yahoogroups.com, Cort Buffington [EMAIL PROTECTED]
wrote:
I spent years with just a 50uA panel meter with lead wires and pins
on
the end -- sticking the pins in the right socket positions to take
the
readings. Not fun, but when I was broke in and just out of
--- In Repeater-Builder@yahoogroups.com, ocwarren2000 [EMAIL PROTECTED]
wrote:
--- In Repeater-Builder@yahoogroups.com, Laryn Lohman larynl@
wrote:
--- In Repeater-Builder@yahoogroups.com, ocwarren2000 w7tio@
wrote:
Hi everybody...
The replacment CD-ROM of the Cushman
--- In Repeater-Builder@yahoogroups.com, Laryn Lohman [EMAIL PROTECTED]
wrote:
--- In Repeater-Builder@yahoogroups.com, ocwarren2000 w7tio@
wrote:
Hi everybody...
The replacment CD-ROM of the Cushman CE-3 Operations / Service
Manual
came today, and so far it doesn't look like
Hi everybody...
The replacment CD-ROM of the Cushman CE-3 Operations / Service Manual
came today, and so far it doesn't look like a mismarked Lotus Pro
install system! I've uploaded it into this board's files. Hope it
helps.
I have another on the deviation meter module that I'll upload..
Hi again, everybody...
The Operations / Service Manual for the Cushman 302 Deviation Meter has
been uploaded.
Dick, W7TIO
--- In Repeater-Builder@yahoogroups.com, skipp025 [EMAIL PROTECTED]
wrote:
http://gigaom.com/2007/03/14/700mhz-explained/
enjoy,
s.
Something's wrong here...
I read the origional Congressional Law, written by non communications
people, where 700 Mhz was to become the overflow
--- In Repeater-Builder@yahoogroups.com, Laryn Lohman [EMAIL PROTECTED]
wrote:
Can this unit be modified to go below 450Mc? Also are there any docs
posted on the Web somewhere? Thanks
Laryn K8TVZ
Mine does a fine job on 440. I use it on 6, 2, and 440. I also have
the
--- In Repeater-Builder@yahoogroups.com, Jim Cicirello [EMAIL PROTECTED]
wrote:
We are going through the same growing pains here in Rural Western
New York.
The problems with the NON-TRUNKING SCANNERS, is they will not go
out to 12.5
KHz or even lower of a split. Here is an example; one of
from a narrow band
signal in a wide band radio...
First fix the channel centering, then narrowing the responce
accordingly.. one follows the other..
Dick
Dick
- Original Message -
From: ocwarren2000
To: Repeater-Builder@yahoogroups.com
Sent: Monday
--- In Repeater-Builder@yahoogroups.com, wb7cjq [EMAIL PROTECTED] wrote:
Dick;
I've been busy. I can't remember if I sent you the programmer
software, FCC data, etc. Please advise!
First, thanks for remembering me... I appreciate it, as I tried your
home phone number several times,
, as I've flown through such bad pollution getting into and out
of their airports that it was like flying through fog... and the
eyes burned from it!! Hahahaha!!
Best,
Dick
- Original Message -
From: ocwarren2000
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday
--- In Repeater-Builder@yahoogroups.com, Kris Kirby [EMAIL PROTECTED] wrote:
On Sun, 16 Dec 2007, Eric Lemmon wrote:
One question comes to mind: Is it really necessary that you know
exactly what the forward/reverse power readings are, or the SWR, or
are you concerned about whether the
--- In Repeater-Builder@yahoogroups.com, wb7cjq [EMAIL PROTECTED] wrote:
This is a tough one. Not much info. available. I have the
programmer
schematic, frequency plan (FCC), the programming software, etc.
But
this is a trunking radio - it doesn't like non-trunked stuff. Just
today,
--- In Repeater-Builder@yahoogroups.com, skipp025 [EMAIL PROTECTED]
wrote:
I did all the sms radio stuff last year on a project and can
probably
provide some limited information to help you along. Yes they are
a pain the fanny to work with, but they can be modified. I also
made up a
--- In Repeater-Builder@yahoogroups.com, skipp025 [EMAIL PROTECTED]
wrote:
Re: Uniden SMS Radios
For what it is, the Uniden SMS Series Radio is a pretty good dollar
value on the used radio market. For a fair amount of time Uniden
became a fairly large player in the 800/900 band LMR
--- In Repeater-Builder@yahoogroups.com, wb7cjq [EMAIL PROTECTED] wrote:
This is a tough one. Not much info. available. I have the
programmer
schematic, frequency plan (FCC), the programming software, etc.
But
this is a trunking radio - it doesn't like non-trunked stuff. Just
today,
--- In Repeater-Builder@yahoogroups.com, wb7cjq [EMAIL PROTECTED] wrote:
This is a tough one. Not much info. available. I have the
programmer
schematic, frequency plan (FCC), the programming software, etc.
But
this is a trunking radio - it doesn't like non-trunked stuff. Just
today,
--- In Repeater-Builder@yahoogroups.com, Yahoo [EMAIL PROTECTED] wrote:
There are a number of old post on this subject. Take a look at the
4 bay
dipole antennas from Antenex (made by Bluewave). VERY broadband.
As for
whether or not they are expensive is a matter of personal opinion.
Jeff
--- In Repeater-Builder@yahoogroups.com, Ken Arck [EMAIL PROTECTED] wrote:
Have a customer with the following issue:
Scenario: Amateur repeater (Mastr II) installed at a 100,000 FM
radio
xmtr site.
Issue: Very low level audio of radio station appears on Mastr II's
xmtr (yes, external
--- In Repeater-Builder@yahoogroups.com, dep_ru_kidding
[EMAIL PROTECTED] wrote:
I have some pre-selectors and Scopes for the Cushman service
monitors
hanging out in my garage I need to get rid of and I'd like to get
something for em. If you have intrest send me an e-mail and we'll
--- In Repeater-Builder@yahoogroups.com, dep_ru_kidding
[EMAIL PROTECTED] wrote:
I have some pre-selectors and Scopes for the Cushman service
monitors
hanging out in my garage I need to get rid of and I'd like to get
something for em. If you have intrest send me an e-mail and we'll
26 matches
Mail list logo
