at in
the radio?
Could the bad connection be inside the case of the regulator?
I just want to make sure that I get the problem fixed and sometimes the
obvious failure, isn't.
Thanks in advance for your guidance and advice.
--
Terry
KE4PJW
Yahoo! Groups Links
* To visit your group
Can anyone ID this tone encoder board?
IC is mx-com mx315
marked with FT303
6 dip switches
DCS / PL ?
Truth Chart ?
THX, WX3M
road, the used road, the DIY road. And I have
the ulcers and gas receipts to prove it. There is a time when you
want to play radio, and a time you just want it to work. It only
takes a short time to get to the latter.
73 Terry WX3M
--- In Repeater-Builder@yahoogroups.com, Maire-Radios maire
anyone have anything used / retired to list for sale?
I'm using OEM tone encode and decode on a Micor Converted Railroad
mobile. I was coordinated a tone of 192.8. Therefore I am looking for a
pair of reeds for that tone. Thanks, Terry
I have a Diamond X50 high atop the School gym roof at about 1588 ft
asl. It runs into a MFJ diplexer and serves a 20 watt 440 repeater and
65 watt 2 meter tranceiver just fine.
Somewhere around 8-9 p.m. December 15, The club I belong to (Mountain
ARC)lost our tower at 2976ft. The area of the site received a blast of
freezing rain, followed by several bursts of very high wind. This
created the dreaded twisting effect that has brought so many others
before it as well.
We
Sometimes I have to use mace, or even get a restraining order to
control my fans.
Bears the markings KM4OI Audio process board, has an LM1036n, three
adjustment pots (bourns), several caps and resistors.
Thanks
need something for 2 meter, .600 split email with what you have thx Terry
Celwave 6 cavity mobile (compact) set. BNC connectors. I believe rated
for 50 watts 450-470, but worked well on 443.050 + ham split. I
obtained a Wacom BpBr set and these are no longer needed.
$60 gets them shipped to you in a Priority Mail flat rate box, CONUS only
Terry
[EMAIL PROTECTED
-Builder@yahoogroups.com, Scott Berry [EMAIL PROTECTED]
wrote:
Hey Terry,
Looks like this is the same duplexer I'll have on my repeater.
How'd they
work out? Pretty well? Just out of curiosity what made you decide to
upgrade the duplexer?
Scott Berry
Email: sberry
I have an NHRC - Micro controller that only saw a few months use,
until the repeater was linked with another.
This is an amazing little single port controller, not much bigger than
a TS-64
I will ship it to you for $75
[EMAIL PROTECTED]
Hello Scott!
Please advise the originator of this message that SPAM should not be
posted. I for one do not appreciate receiving spam via this list.
--- In Repeater-Builder@yahoogroups.com, Ted Bleiman K9MDM - MDM Radio
[EMAIL PROTECTED] wrote:
--- On Thu, 7/10/08, Dan
Here is a positive note, to cap off several negative vibes that have
been flowing lately.
Here is a simple system built with my very basic knowlege, enhanced by
this list, the RBTIP site, and first hand help from Scott.
I realize it's nothing special. Just an example of the fine service
provided
give any clue
to what type of system they have or are building?
Thanks
Terry
Eric, I am hearing traffic from our newly formed County Police.
--- In Repeater-Builder@yahoogroups.com, Eric Lemmon [EMAIL PROTECTED]
wrote:
Terry,
The frequency 461.58125 MHz is not authorized for any public-safety
use; it
is a narrow-band trunking system channel for commercial
I am running a Diamond X-200 with a MFJ-916 diplexer on 146.850 and
443.050 with excellent results. The VHF makes about 50 watts the UHF
30. I tested the diplexer with a 5 watt bird slug while transmitting
100 watts into the opposite port, before attempting the configuration.
Both repeaters also
Why don't you worry about your own repeater and let the other owner
worry about his. You are into FCC rules discussion which Kevin prohibits.
Your question was: Why should I use 7 length of interconnect line
between the cavities? (think it's 1/8 wavelength)
And why are the length of the coupling cable to the t rx-line 9 and
tx-line 26?
The answer is: That is what the design calls for.
W1GAN is probably SK by now, so you will just
I'm reassembling a UHF Micor station. I have a Audio/squelch
#TRN6006A. Is this the correct board? There is no audio amp in the
chassis either. Does it use one from a VHF or UHF Mobile??
Thx WX3M
interconnect board pins
come through, pin 6 to 14 in jumpered.
J2 19 is jumpered to 20
What say you?
Thanks,
Terry
Yes, you may be able to look at the manuals and drawings and engineer
the connection. I think it would be much better to interface both
machines to an inexpensive controller. I have a UHF and VHF Micor
Station lashed up with a NHRC-4 that work FLAWLESSLY. (Thanks mostly
to N3XCC)
There is also a
Does anyone have experience using this model on 2 meters? Do they provide
enough practical isolation for single antenna, 600kc split?
(Sinclair Q2220E 4 Cavity VHF BpBr Repeater)
Wayne,
I got a chance to see what I had. I have a Mastr Exec II low band mobile, but
with the 100W PA. The number on the radio is ST74AAN33AH. I got this several
years ago but have never tested it.
Terry, KM5UQ
--- In Repeater-Builder@yahoogroups.com, Wayne wa5...@... wrote:
After
29, 2010 8:38 AM
To: Repeater-Builder@yahoogroups.com
mailto:Repeater-Builder%40yahoogroups.com
Subject: [Repeater-Builder] Re: Wouxun Radio
Terry,
I wondered the same question about a year ago and discovered that
they are
type-accepted
Hi Don. Call BD enterprises at 408 246 6231 and ask if his 1p controller
will fill the bill for you. At 69.00 It is affordable. 5.00 was the shipping
to my area. It morse id's and has 32 remote commands. Terry
- Original Message -
From: Don [EMAIL PROTECTED]
To: Repeater-Builder
Hi Mike Where are yopu located? Terry
- Original Message -
From:
Mike
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, January 04, 2004 10:12
AM
Subject: [Repeater-Builder] Can some one
please help?
I am looking for instuctions and details on which
Omnicron electronics makes software to make a PC into a voice-logger if
that's what you need.
Terry Byrd
_
Keep up with high-tech trends here at Hook'd on Technology.
http://special.msn.com/msnbc/hookedontech.armx
Yahoo
for the converted
Mastr II mobiles. I can tell you for sure that 443.450+ is one such
problem frequency.
--
Terry
KE4PJW
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL
standard 600kz seems to work the best I've found. seperate the antennas
vertically the right distance like .5 wavelength. Terry
- Original Message -
From: courir26 [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, April 17, 2004 8:17 AM
Subject: [Repeater-Builder
The p1 is 2X3 pc bd with a db9 to hook up with your computer to program it.
SIMPLE! It was 74.00 delivered to my door. 32 remote control cmnds as well.
Terry
I'll look arnd for the papers with more info.
- Original Message -
From: Paul Finch [EMAIL PROTECTED]
To: Repeater-Builder
I am using a Vonage VoIP box + 802.11b to the repeater site for dial
tone. It supports 911 and is cheap ($14.99/Mo)
-- Terry
KE4PJW
-Original Message-
From: georgiaskywarn [mailto:[EMAIL PROTECTED]
Sent: Sunday, July 25, 2004 6:05 PM
To: Repeater-Builder@yahoogroups.com
Subject
(Q902 - M9701).Any help would be appreciated.
Thanks.
Terry
WK4E
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups
I have one of the 5000's and i have a Link Controller that never has interfaced correctly since I have had it. Do you have to rewire the 5000 in any manner other than when it came from the factory when installing thr Pacific Research controller? Eric Lemmon [EMAIL PROTECTED] wrote: Mike,You're
that could program these.
Terry Stewardson
VA3LU
YAHOO! GROUPS LINKS
Visit your group "Repeater-Builder" on the web.
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to the Yahoo! Terms
Urine Test?
- Original Message
From: rman [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, August 5, 2007 8:33:31 AM
Subject: Re: [Repeater-Builder] test
And I forgot to study..
Maire-Radios wrote:
test?
Hi All,
I did the X2/X5 Range Switch Modification on my Bird 43 about six months ago.
Since I did the deed I have not suffered from cough due to cold, any hang nails
or suffered from malnutrition. I realize that these things COULD happen but
the likelihood is an acceptable risk. We have to
This brings a thought to mind. The Department O Defense states that PAVEPAWS is
vital to our defense and that the operation of our repeaters is causing that
system to fail. The Devils Advocate in me begs the question, Do they think the
bad guys don't know this!! Is it not ludicrous to place the
it their
business to keep former WACOM customers happy.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@ yahoogroups. com
[mailto:Repeater-Builder@ yahoogroups. com] On Behalf Of Dail Terry
Sent: Thursday, April 10, 2008 8:25 AM
To: Repeater-Builder@ yahoogroups. com
Subject
Here is an interesting item for the WP 642 duplexers. The existing
coax between the cans I was asking about is marked WACOM PRODUCTS RG
213U DOUBLE SHIELD. 213 not a typo.
Dail
N6DGT
I call it Adding a little CHLORINE to the GENE POOL
N6DGT
Dail
- Original Message
From: MCH [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, April 22, 2008 9:05:19 PM
Subject: Re: [Repeater-Builder] More on Copper theft
My way is prevention. Once they hit that
Yhis reminds me of the story of the two hams driving a guy wire stake
with a sledge hammer. The one holding the stake said When I nod my
head, Hit It
Dail
N6dgt
--- In Repeater-Builder@yahoogroups.com, Paul Plack [EMAIL PROTECTED] wrote:
Uh...Burt, I think he meant water in a separate cup.
OK GUYS... Lets get back to repeaters..
Dail Terry
N6DGT
- Original Message
From: Tom [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, July 12, 2008 7:19:51 PM
Subject: [Repeater-Builder] Re: SPAM was amber alert, SNOPES VERIFIED, sent to
you by Dan Long
Darned thing is going out of lock,. The unlocked LED is flashing off and on.
Does anyone have any idea where to begin to look?
Does anyone have a service manual on it.? I see several Cushman monitors on
E-bay, but not this one.
Terry-WB0VQP
Hi. I have a 70cm repeater that has 2 Mastr II's, 1 for repeater, 1 for link.
Several months ago, everything worked great. I pulled it offline several
months ago and had it in my shop until a few days ago. I fired it back up, and
both receviers are dead. I can inject a 11.2 MHz signal
.
From: terry dalpoas km...@yahoo.com
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, August 29, 2009 4:39:10 PM
Subject: Dead Mastr II Receivers
Hi. I have a 70cm repeater that has 2 Mastr II's, 1 for repeater, 1 for link.
Several months ago, everything
or are they programmed from
Link Communications for their controllers?
73 Terry KM5UQ
:00:53 PM
Subject: Re: [Repeater-Builder] RLC-1 Controller CPU
transistor may be shorted between gate and drain, try removing it off
the board and try it again.
On Sun, Sep 6, 2009 at 11:29 AM, terry dalpoaskm...@yahoo. com wrote:
Hello. I have a Link Communications RLC-1 controller
Yes. I did that first to wipe out all the previous owner's programming.
Terry, KM5UQ
From: Chuck Kelsey wb2...@roadrunner.com
To: Repeater-Builder@yahoogroups.com
Sent: Monday, September 7, 2009 8:06:23 AM
Subject: [Repeater-Builder] RLC-1 Processor
at an underground
coalmine with my uncle here in Eastern Oklahoma and that works really well). I
try to keep some of each on hand just in case I need them.
Terry, KM5UQ
From: hitekgearhead hitekgearh...@hotmail.com
To: Repeater-Builder@yahoogroups.com
Sent
. Just let me know and I'll dig them
out and see exactly what I have.
Terry KM5UQ
From: adjiqc adj...@yahoo.ca
To: Repeater-Builder@yahoogroups.com
Sent: Monday, September 14, 2009 9:31:20 AM
Subject: [Repeater-Builder] GE Mastr II parts
Hi All,
I am new
as a mobile and just
convert it to repeater? Can a 800 be converted to 900 amateur?
Thanks
Terry KM5UQ
is OK). Could
there be a problem with the TX side of the cans?
Terry KM5UQ
, worst
SINAD RX reject.
I tuned a set of duplexers this way before on a 2m repeater using 6 cavity
Sinclair BpBr with no problems, this is the first I have messed with a set of
Wacom's.
Terry KM5UQ
From: Eric Lemmon wb6...@verizon.net
To: Repeater-Builder
Jeff,
Best I can tell the connecting harness is good. I may try the set meant for
the link radio and see what they do. How do I tune for maximum return loss?
If it is better, you can contact me off the group, so it does not get tied up.
Terry KM5UQ
From
with was in 2002 (at the age of 22 before
I was married and had a kid, and was my first repeater), and am relearning this
stuff. The one I am working on now is my first 70cm. I was told these things
are addictive, and I like the challenge (not the headaches, though).
Terry, KM5UQ
and Jeff are giving me on this.
Terry KM5UQ
From: Eric Lemmon wb6...@verizon.net
To: Repeater-Builder@yahoogroups.com
Sent: Sunday, September 20, 2009 12:52:35 PM
Subject: RE: [Repeater-Builder] UHF Duplexers
Terry,
In lieu of the ideal bench equipment, yes
receiving a signal, the voltage rises
to 10.07V, whether the signal is generating
CTCSS or not. The black, orange (PTT), and violet (mic hang up) wires are all
grounded on the '64. I am thinking there may be a problem with the TS-64. Any
advise would be appreciated.
Terry, KM5UQ
Terry
Check with RF Parts (www.rfparts.com). Years ago I purchased a power module
for an IC-2710H Icom and it was about half the price than Icom.
From: byronhham hellewe...@utahwisp.com
To: Repeater-Builder@yahoogroups.com
Sent: Sat, May 22, 2010 12:02:08 AM
I would get into contact with the repeater coordinater for that area. They
should be able to make recommendations for frequency pairs, PL tones, and power
output. I know that's what they try to do here in Oklahoma, I'm sure other
states are very similar.
-Original Message-
Date:
I was asked the other day by a friend if you could use an older mobile (Micor,
Mitrek, Mastr II and Exec) that has been duplexed for a repeater in GMRS,
public safety, etc. I told them that I was pretty sure it was legal since the
transmitters are FCC type accepted and as long as they transmit
heads. Is anyone
familiar with this setup? Anyone with info on the radio itself, please contact
me direct so that the group is not tied up with my radio problem. Thanks in
advance.
73, Terry, KM5UQ
I have a decent collection of Vibrasponders and Vibrasenders. I will check if
I have one for 114.8 Hz.
73, Terry, KM5UQ.
-Original Message-
Date: Wednesday, June 16, 2010 12:41:19 pm
To: Repeater-Builder@yahoogroups.com
From: kd0bjt kd0...@gmail.com
Subject: [Repeater-Builder
this helps.
73, Terry KM5UQ
From: Steve Jones steve.jo...@rogers.com
To: Repeater-Builder@yahoogroups.com
Sent: Fri, July 16, 2010 9:13:49 AM
Subject: [Repeater-Builder] Controller recommendations
Hello all.
I'm looking at replacing an MSR2000 and homebuilt controller with a Quantar
remember, it has an
adjustable delay. Hope this helps.
73, Terry KM5UQ
-Original Message-
Date: Sunday, July 18, 2010 10:20:05 pm
To: Repeater-Builder repeater-builder@yahoogroups.com,Repeaters
repeat...@yahoogroups.com
From: otil sinil otilsi...@yahoo.com
Subject: [Repeater-Builder] Need
This may be a dumb question, but I'll ask anyway. I saw some dual band
portables on eBay, new for about $100, made by Wouxun. I doubt very much they
are FCC type accepted. Is it okay to use these on amateur frequencies? Thanks
in advance.
Terry, KM5UQ
I have several Micor squelch boards that I plan to use on some future repeater
projects. I want the repeaters to be accessed with a PL tone. I will set this
up where there has to be a carrier along with PL. If I do this, will I still
have the nice sounding Micor squelch, or will the PL
will have that
feature. To bad amateur equipment does not have it.
-Original Message-
Date: Saturday, August 28, 2010 6:27:32 pm
To: Repeater-Builder@yahoogroups.com
From: Eric Lemmon wb6...@verizon.net
Subject: RE: [Repeater-Builder] Micor squelch with PL
Terry,
Ideally, the Micor
I inherited one of these with two of radios, one for the repeater, one for a
link. On the link PA, the finals were taken out and only the driver was left.
Worked fine.
-Original Message-
Date: Monday, August 30, 2010 4:48:49 pm
To: Repeater-Builder@yahoogroups.com
From: Paul Plack
Does anyone know if the voice on this controller use a TI voice synthesizer or
if it has the real speech like on the Arcom RC210? Someone in the club liked
how my RLC 1 Plus sounds and he wants one that sounds like it, but less
expensive.
Thanks. I let him know and he can decide which way he wants to go.
-Original Message-
Date: Friday, September 03, 2010 2:37:11 pm
To: Repeater-Builder@yahoogroups.com
From: wd8chl wd8...@gmail.com
Subject: Re: [Repeater-Builder] S-Com 7330 Controller
On 9/3/2010 3:07 PM, terry dalpoas
72 matches
Mail list logo
