Thanks PT.
When I wrote about the silver-colloids report of 32 brands, I wrote it
wrong. The fifth place should have been written as fifth last, or 28th
for the SG-7. The brand that was number one was Mesosilver. Do you think
that Mesosilver owns silver-colloids.com? I need to do a lot more
Hi Joe,
Please also look at the silver cell process.
Many here have found that the simplest way is the best and if you use a current
limiting diode or current limiting ic costing around a dollar then all you need
is a 30 v or thereabouts supply and to keep the current to a maximum of 1ma per
Hi Asif,
I already own a BK Precision 30 V DC Power Supply 1630. It will help
with current limiting, so no need for a current limiting diode or IC.
However, if I ever make one for someone else, I'll investigate that
route. I assume from my rusty old electronics memory that you mean a
zener
Hi Joe,
When I started someone told me to distill the water 7 times for purity. I find
once through my distiller makes fine EIS... but it is amazing the smell of the
distiller after I am done. I don't want to think about taking that stuff into
my body or even showering in it.
PT
Each point addressed below
On 21 Mar 2013, at 19:34, Joe Huard joe.hu...@primus.ca wrote:
Hi Asif,
I already own a BK Precision 30 V DC Power Supply 1630. It will help with
current limiting, so no need for a current limiting diode or IC.
Current limiting is in order of ma for most people
Hi PT
I also found some people were getting good results with their single distilled
water.
But in my particular case and also of some others too it had to be double
distilled. Maybe the distillers had a design issue where some of the solubles
were still getting through somehow? Until I had
So PT, that leaves me to ask, what do you shower in? And the part that
doesn't smell but is much more dangerous is HFSA under the pseudonym
fluoride. I use a shower filter and would use a whole house filter if it
would get rid of fluoride. We are presently trying to get the City of
London to
No not a zener diode but a CLD (Current Limiting Diode) this diode limits the
current to a specific amount according to which one you pick out, 100uA, 470uA,
1.0mA, 1.5mA or higher. I use the diuodes with a 100 volt max limit cause I use
the 36VDC (4- 9 volt batteries). If I wish to use a
http://idealearthwater.com/whole-house-filter/
offers a fluoride removing whole house filter.
Maybe there are similar whole house filters sold in the UK?
-Original Message-
From: Joe Huard
Sent: Thursday, 21 March, 2013 17:24
To: silver-list@eskimo.com
Subject: Re: CSnew member
I'm in Canada, LOL. The Windsor, ON vote was last Nov. They got it out
to the East in Waterloo, ON in 2010. I just don't want to spend valuable
money on an alumina fluoride filter and then this city will stop putting
in. I am also part of our local effort to lobby the stupid councillors
at
Thanks, Asif.
PT
From: Asif Nathekar asifnathe...@hotmail.com
To: silver-list@eskimo.com silver-list@eskimo.com
Sent: Thu, March 21, 2013 5:39:07 PM
Subject: Re: CSnew member intro
Hi PT
I also found some people were getting good results with their single
I'm with you, Joe. What do the glass jars do?
PT
From: Joe Huard joe.hu...@primus.ca
To: silver-list@eskimo.com
Sent: Thu, March 21, 2013 6:24:51 PM
Subject: Re: CSnew member intro
So PT, that leaves me to ask, what do you shower in? And the part that
I'm going to stick a couple of silver electrodes through the plastic cap
and run current through them at a slow rate, less than 1 ma per square inch.
Joe
On 21/03/2013 9:55 PM, PT Ferrance wrote:
I'm with you, Joe. What do the glass jars do?
PT
Does anyone know if taking colloidal silver/EIS orally will help make stem
cells?
Thanks.
Melly
14 matches
Mail list logo