On 2007/04/28 17:13, Jan Ceuleers wrote:
Another point: I'm not familiar with monowall, but if it is Linux-based
and you can log into it, try issuing the following command:
FreeBSD-based; actually, thinking about it - since m0n0wall prints
to the console while booting, even if fastboot=on
So, are there any suppliers of affordable cases (best would be if they
were in Europe oder Germany) which fit for some of our needs, lets say...
These suppliers have cases which fit some of your needs:
Europe: https://kd85.com/soekris.html
Australia:
On 2007/05/10 13:51, Soren Kristensen wrote:
Emilio Perea wrote:
I've been using a 4801-50 with a SanDisk 1GB Ultra II CF card for a
while now, using OpenBSD without any problems. But I was looking for
bigger, and preferably faster disk, and bought a Sandisk 2GB Extreme
IV CF card.
On 2007/05/18 10:39, Adam Jacob Muller wrote:
How are you writing out the dhcpd.conf file, the errant ^M could be
the result of saving the file with the wrong line endings, \r\n vs \n.
M-^? != ^M
But when I boot the 4801, it gets the information from the dhcp server
correctly, but when
On 2007/05/25 20:25, Michael Stone wrote:
is there any way (like a boot time parameter or somesuch) to get the
time to work properly on a 4501 other than recompiling with a non-default
frequency setting?
ntpd
___
Soekris-tech mailing list
On 2007/06/25 07:48, Bob Camp wrote:
One possibly un-acceptable solution would be USB serial dongles. They
are nice for a console server because you can spread out the
cabling. Depending on the size of your system that may or may not be
an advantage.
about the only way to do this at a
On 2007/07/24 06:26, Poul-Henning Kamp wrote:
There's a little secret about the 5501 which Søren hasn't sad much
about yet: The 5501 has a simple lights out feature on the console
port.
*excellent*. Thanks!
___
Soekris-tech mailing list
speed.) Looking at the $30 Intel PWLA8139s, I can't tell if they'll
itym PWLA8391; I haven't tried a GT but the older cards worked
in a 4801 (they have universal 3.3v/5v signalling).
So, A) will it work at 3.3v at all, and B) can the Soekris supply that
much juice to the PCI slot?
See the
On 2007/08/20 08:59, Joerg Schoppet wrote:
I just got a net5501. How can I change the CF-port to be Primary Master?
By using a different CF card.
___
Soekris-tech mailing list
Soekris-tech@lists.soekris.com
On 2007/08/19 09:02, Paul Bartell wrote:
the elan series was killed off I believe. it is still on the greymarket.
Not sc520, according to this post (paragraph near the bottom).
http://marc.info/?l=soekris-techm=117610477221022w=2
David, did you find this one?
On 2007/08/31 11:14, Otfried Geffert wrote:
I believe the reset switch is connected to GPIO18.
I have a net5501 and would like to know the wiring too
- also for the purpose of shutting/down my OS (OpenBSD 4.0)
Why 4.0 on a new machine? Anyway, you can just cycle through the
pins and see
On 2007/09/04 07:32, Bob Camp wrote:
There is one thing to be careful about. The ComBios serial flash
update uses Xmodem-CRC. The process the bios uses is tuned to match
the Windows Hyperterminal implementation of the protocol.
cu/lsz works fine for me... the basic procedure is here:
Looks like the system isn't using the serial console.
The installer asks near the end whether you'd like to use
a serial console. Answering this 'yes' saves a lot of trouble...
Now I can see the booting message, but I can't see the login prompt, it
stops here:
The serial console isn't
On 2007/10/12 11:33, Otfried Geffert wrote:
even after an BIOS update to 1.32i
my OpenBSD 4.0 tells me that DMA on IDE is still unsupported.
Support for CS5536 was added about a year ago, it's in OpenBSD 4.1.
___
Soekris-tech mailing list
On 2007/10/19 09:51, Bill Maas wrote:
as the other soekris-tech list members stubbornly refuse to go into your
original question
it's mentioned here:
http://www.soekris.com/Software/changelog.txt
___
Soekris-tech mailing list
On 2007/11/18 14:35, Lyle Scott III wrote:
i inherited a net4511 board and i am trying to update the BIOS from
1.26a to current.
I am in hyperterm under windows and log in great. I type download and
it prompts me to send file using XMODEM.
I send the file using XMODEM in hyper term and i
On 2007/11/24 07:07, windowlicker 259 wrote:
Where is this wiki located. I have been looking for a kernel .config
for a net4801 for quite a while.
soekris.info
___
Soekris-tech mailing list
Soekris-tech@lists.soekris.com
On 2007/12/18 00:33, Joel Jaeggli wrote:
sata ssds that are even faster are possible but command a substantial
price premium...
In the 5501, it looks like the SATA connector is bridged to the same
IDE interface as the CF card.
___
Soekris-tech
On 2007/12/22 20:29, Lars Noodén wrote:
It's not the same with /dev, however. I've tried a few variations, e.g.
swap /dev mfs -P/dev.base,async,rw,-s=5000,-i=128 0 0
This is fine, just make sure you don't remove /dev from / (it works
fine just overlaying it with the MFS), just make dev.base
On 2008/01/16 17:43, Lars Noodén wrote:
Jean-Yves Boisiaud wrote:
...
To reduce the /dev memory fs space ...
- delete unused devices.
# du -h /dev
1.0K/dev/fd
34.0K /dev
What is the safest or most efficient method to go about doing that?
The safest and most efficient method is to
On 2008/01/21 12:18, Jean-Yves Boisiaud wrote:
there is no typo, but I forgot to tell that the system I use was old :
uname -a
OpenBSD xx 3.8 GENERIC#138 i386
and
mount_mfs -i 256 -s 592 -P /var/run/dev swap /dev
http://marc.info/?l=openbsd-miscm=120086358424135w=2 explains why
On 2008/01/25 12:22, Mark K. Mellis wrote:
I may be asleep at the switch here - did the 19 inch case for the 5501
that is mentioned on the Soekris web site ever ship? If not, any
alternatives to the applianceshop.eu one mentioned on the list the
other day?
On 2008/02/13 16:24, Bob Camp wrote:
There is a dark side to this. The better you document the product,
the easier it is to duplicate. Simply buying parts and tossing them on
a pc board is pretty easy these days. Documenting without giving away
to much is a fairly difficult art.
On 2008/02/13 21:05, Stephen Patrick wrote:
How about a WikiManual?
Everyone contribute?
There already is one at http://wiki.soekris.info/, but bear in mind
it is just information from random people on the internet who, even
with the best intentions, might not be totally accurate.
On 2008/02/20 20:04, Torben Nielsen wrote:
Hi
The wiki[1] mentions 2.5 drives from Hitachi and Fujitsu, but does anybody
have experience with the Seagate Momentus[2] series ?
According to the seagate website, these disks are also apropriate for server
use.
[1]
On 2008/02/21 14:47, Bernd Walter wrote:
On Wed, Feb 20, 2008 at 11:30:30PM +, Adam Retter wrote:
On Wed, Feb 20, 2008 at 11:18 PM, Stuart Henderson [EMAIL PROTECTED]
wrote:
On 2008/02/20 23:08, Adam Retter wrote:
The console output over COM0 from the net4801 is below
I've seen some problems with the onboard NICs on net5501, where
if the device connected is unplugged and replugged, the interface
has link, is able to transmit packets, but is unable to receive
packets (nothing shown in tcpdump on the interface). Bringing
the interface down and back up fixes it.
On 2008/03/05 12:02, Mike Tancsa wrote:
On FreeBSD, I created this simple userland script that resets the nic by
watching for its up/down events in syslog's kern.* facility. The proper
fix on FreeBSD is at
Ah, good idea. The OpenBSD kernel doesn't log interface events, but this
can be done
On 2008-04-18, Andrew Back [EMAIL PROTECTED] wrote:
I'm considering replacing a Net4521 OpenBSD firewall + D-Link DSL router
with a Net5501 running OpenBSD as both router and firewall. Does anyone have
any experience of using PCI or miniPCI ADSL cards in a Soekris device and
ideally running
On 2008-04-18, Izumi Utakoji [EMAIL PROTECTED] wrote:
Also, since I am a new comer here, allow me for the basic question, but
how do you do search through the archive at Soekris site???
gmane or marc
___
Soekris-tech mailing list
On 2008-04-19, Lars Noodén [EMAIL PROTECTED] wrote:
I have a Net4801-60 (256MB RAM) with OpenBSD 4.2 that sometimes gets no
link with either cross-over or straight-through cables.
Sometimes it's enough to simply switch to a different cable of the same
type. Other times, even though the
On 2008-04-24, Lars Angus Lyons [EMAIL PROTECTED] wrote:
If you expect to leave it in the wild for years of reliable service ?
...with a 2.5 SATA drive?
___
Soekris-tech mailing list
Soekris-tech@lists.soekris.com
On 2008-04-25, Wolfram Schlich [EMAIL PROTECTED] wrote:
- scp directly: avg 3.3 MB/s
- scp via OpenVPN: avg 1.8 MB/s
- netio directly:100 Mbit saturated
- netio via OpenVPN: 2.6 MB/s TX, 3 MB/s RX
- iperf directly:100 Mbit saturated
- iperf via OpenVPN: 1.75 MB/s
You don't go
On 2008-04-27, jacco [EMAIL PROTECTED] wrote:
printf \x11\x00\x00\x00\xB6\x00\x00\x00\xC7 /dev/tty
dd if=/dev/tty of=/root/tmp/output bs=1 count=31
See man 4 tty
___
Soekris-tech mailing list
Soekris-tech@lists.soekris.com
On 2008-04-28, Chantal Rosmuller [EMAIL PROTECTED] wrote:
booting tftp:/bsd: open tftp:/bsd: Unknown error: code 60
failed(60). will try /obsd
any pointers would be welcome :)
Any better if you add next-server tftp-server-ip-address; and
restart dhcpd?
On 2008-04-28, Jed Clear [EMAIL PROTECTED] wrote:
On Mon, 28 Apr 2008, Kjetil wrote:
I am trying to install openbsd but I keep getting an error message,
booting tftp:/bsd: open tftp:/bsd: Unknown error: code 60
failed(60). will try /obsd
[snip]
Try add these two options to your
On 2008-04-30, Chantal Rosmuller [EMAIL PROTECTED] wrote:
I added a file etc/boot.conf to the tftp directory with this content:
set tty com0
stty com0 9600
boot bsd.rd
I'd recommend set image bsd.rd so you can still type commands,
it will then boot bsd.rd after a timeout.
unfortunately it
On 2008-05-01, Mark Brown [EMAIL PROTECTED] wrote:
On Thu, May 01, 2008 at 12:49:39PM +0900, Izumi Utakoji wrote:
Will it be possible to use multiple miniPCI high power cards, on
net4801, through mikrotik 4 miniPCI slot PCI extention board?
I want to use
600mW high power card from Engenius
On 2008/05/18 12:56, Peter van Oord van der Vlies wrote:
I have the same issue on openbsd 4.2(not tried 4.3 yet)
4.3 won't help this problem.
Sometimes it will not allow any traffic on the interface that is
connected by a cross-cable. Only on machines that runs VISTA/XP i had
this issue.
On 2008-05-21, K K [EMAIL PROTECTED] wrote:
On Wed, May 21, 2008 at 10:24 AM, Moe Sizlak [EMAIL PROTECTED] wrote:
As someone mentioned earlier the problem seems to be entirely vr driver
related.
This makes me concerned.
We've had a couple of 5501's from KD85 running as simple Internet
On 2008-05-22, Georgios Tsarpalis [EMAIL PROTECTED] wrote:
Hello,
I just bought a net5501 and I'm trying to install OpenBSD 4.3 on it
without success. I follow the standard pxeboot procedure as described in
the documentation, but the serial connection just seems to hang whenever I
type the
On 2008-05-30, C. Schlecht [EMAIL PROTECTED] wrote:
--===0199348912==
Content-Type: multipart/alternative;
boundary==_Part_4507_11920883.1212155576987
ugh
I have a Net5501-70and tried to install pfsence. First, I copied the image
on a CF card and tried to boot -- no
On 2008-06-04, Carlos Castro [EMAIL PROTECTED] wrote:
Does anyone know of a 3rd party vendor who might have a 19 rack mount case
for the net5501 boards?
http://wiki.soekris.info/Alternative_chassis
___
Soekris-tech mailing list
On 2008-06-10, Chris Babcock [EMAIL PROTECTED] wrote:
I have tried many different models and brands of non-industrial flash,
and there seems to be significant differences in what ATA capabilities
different cards have. In practice, the vendors don't seem to include
the ATA interface
On 2008-06-11, Chuck (Doc) Beaudette [EMAIL PROTECTED] wrote:
When I replaced the 4801 with a new 5501, the throughput between the Cisco
2640 and the Soekris router dropped to next to nothing. We tried several
different configurations (Auto negotiate, fixed 100mb Full-Duplex, etc.),
nothing
On 2008-06-26, David Coppa [EMAIL PROTECTED] wrote:
I'd like to build a compact ADSL router with some server capabilities
(http, smtp) using a net5501-70 and the adsl2 pci card in the subject.
Will this card work/fit well? Anyone using It?
The size should be ok for the standard case, and it
On 2008-07-05, Chris Babcock [EMAIL PROTECTED] wrote:
A 5501 can handle the full bandwidth of 100M links. However whether a
5501 can handle your environment depends on how complex a ruleset you
are planning on using for firewalling.
Besides ruleset, it also depends a lot on how many packets
On 2008-07-17, Erwin Geuens [EMAIL PROTECTED] wrote:
for a customer we want to use a 500 Gb sata disk (WD caviar GP500) as
mini file server. However during boot (bios 1.33) the disk is
recognized as 136 Gb with parameters 1024-255-63.
Is there a way to fix this?
Thx
Erwin
PS: we will
On 2008-07-17, Guillaume FORTAINE [EMAIL PROTECTED] wrote:
http://www.oxfordtec.com/uk/p119/SparkLAN-WMIR-215GN-WLAN-802.11n-draft-MiniPCI-Wifi-Module---Laptop-Internal-Ralink-RT2860-Chipset-Wireless-Adapter/product_info.html
I've got one of those exact cards as an AP, it works nicely. I don't
On 2008-07-23, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Great suggestions everyone! We're definitely getting closer. Indeed I am
certain the wiring is correct; that was one of the first things I checked.
Instead, this is looking more like an OpenBSD configuration or hardware
issue.
On 2008-08-22, Lars Noodén [EMAIL PROTECTED] wrote:
Since soekris devices have one mini-pci slot, would it be possible then
to use the regular PCI for extra ethernet while using the mini-PCI for
2-port RS-232 card?
Yes, of course.
___
Soekris-tech
On 2008-09-05, Ryan Corder [EMAIL PROTECTED] wrote:
On Sat, Sep 06, 2008 at 12:33:58AM +0700, Soekris Maillist wrote:
| Anyone know where to buy these?
|
| The smallest ones I can find here in Thailand seems to be 2 GB, which is
| extreme overkill for a 16 MB image.
If you do find anything
On 2008-10-01, Thorsten M. [EMAIL PROTECTED] wrote:
I've set up a a Linux system with strpped down kernel on my net4501
You do mean _4501_ not 5501?
board. Now my problem is, that the CF card is really slow. hdparm shows
~2 MB/s transfer speed and UDMA is disabled.
I don't think 4501 has
On 2008-10-27, Andrew Stack [EMAIL PROTECTED] wrote:
tftp server and bsd.rd/boot.conf is in /tftpboot.
boot.conf
set tty pc0
stty pc0 19200
s/pc0/com0/ and move the file to /tftpboot/etc/boot.conf
boot bsd.rd
it's usually better to use set image bsd.rd here, then you
get a chance to type
On 2008-11-04, Andrew Gordon [EMAIL PROTECTED] wrote:
I'm aware that this problem doesn't apply in places where direct PPPoE
connections are widely available: here in the UK, 99% of ISP connections
are PPPoA only.
nope, see BT SIN 386. working absolutely fine here and at some
customers (it's
is it possible to install Debian Linux from a Debian CD?
No, the Soekris BIOS doesn't allow you to boot from CD.
___
Soekris-tech mailing list
Soekris-tech@lists.soekris.com
http://lists.soekris.com/mailman/listinfo/soekris-tech
On 2008-12-04, Ebbe Hjorth [EMAIL PROTECTED] wrote:
Hi,
I just bought a soekris 5501, with flash, sata disk and a 40 to 44 pin
converter, to boot from cdrom, but i think im missing a manual to get it
booting from the cd rom, can you please advice? Right now i dont have the
flash card in.
It
On 2008-12-04, Andrew Thomas [EMAIL PROTECTED] wrote:
PXE boot isn't really for the faint hearted.
depends on the OS. for some it's very simple providing you can
read and follow instructions, just a handful of steps. for others
iirc you get to either configure NFS or rebuild your boot loader...
On 2008-12-05, stef [EMAIL PROTECTED] wrote:
The OS is working good and I made some tests in order to use it as a
router.
But it's impossible to communicate with eth1 eth2 eth3. eth0 is well
working.
As the other posts point out, this is a broken configuration.
What are you actually
On 2009-01-03, Lars Noodén l...@umich.edu wrote:
A Net4801 unit I have is not letting me do PXE boot.
Which of the settings get changed to allow PXE boot again?
this, I expect:
PCIROMS = Disabled
___
Soekris-tech mailing list
On 2009-01-23, Stuart Henderson s...@spacehopper.org wrote:
On 2009-01-23, Lars Noodén l...@umich.edu wrote:
A while back Marc Balmer wrote:
Beware that the GPIO subsystem has seen substantial
changes recently. In -current, and thus upcoming
releases
On 2009-03-24, Vasily Ivanov vas...@anabar.ru wrote:
Hi, all
Last week I've got a new 5501-70 box.
Unfortunally, there are a number of problems with this box.
1. I cannot do upgrade of BIOS (1.33-1.33c)
cu on OpenBSD works reliably following these instructions:
On 2009-03-24, Vasily Ivanov vas...@anabar.ru wrote:
On Tue, Mar 24, 2009 at 12:57:26AM +, Stuart Henderson wrote:
1. I cannot do upgrade of BIOS (1.33-1.33c)
cu on OpenBSD works reliably following these instructions:
http://wiki.soekris.info/Updating_Bios#cu_and_tip
it fails also
On 2009-03-26, Soekris Mailinglist soek...@nixtech.net wrote:
Is there a way to see if the box has been reset by pressing the hardware
reset button?
The box is 4501 and 5501 both running Linux-2.6.28
Thanks,
Thomas Albech
there's a BIOS Reset setting which switches between the button
doing
On 2009-04-18, David Alexander listm...@cox.net wrote:
On Thu, 16 Apr 2009 14:59:10 -0700, David Alexander listm...@cox.net
wrote:
According to the Soekris web page the 5501 has an UltraDMA-100
controller. I'm having trouble getting it to try anything above
UDMA mode 2.
My problem is that I
On 2009-04-18, David Alexander listm...@cox.net wrote:
On Sat, 18 Apr 2009 22:55:14 + (UTC), Stuart Henderson
s...@spacehopper.org wrote:
On 2009-04-18, David Alexander listm...@cox.net wrote:
I'd still like to figure out how to tell OpenBSD to try using a higher
UDMA mode.
search for 80
On 2009-06-10, Alex Samad a...@samad.com.au wrote:
Is any one else using a tdm410 in one of these boxes ? How are you
getting the power to the card for the FXS ports. I have noticed, just
behind the molex connector pins P8 and digum talk about a pwr2400b which
is a PCI face plate that
On 2009-08-19, Lars Nooden l...@umich.edu wrote:
Chris Cappuccio wrote:
Lars Nooden [l...@umich.edu] wrote:
Chris Cappuccio wrote:
this is essentially the same as an ultra-cheap versatek 170p modem...
Not at all the same capabilities. Compare:
On 2009-09-06, der Mouse mo...@rodents-montreal.org wrote:
Looking at the diff between the 3.1 driver and the -current driver,
most of the changes look irrelevant (eg, changing how to get the softc
from the device), but there are some that aren't. None look obviously
related to the Rhine III,
On 2009-09-18, Dánial Olsen d...@ft.fo wrote:
Hi,
I just had a weird problem with two of my 5501 boxes, running OpenBSD 4.3,
connected to the same switch.
The problem was that two of the four connected vr interfaces seemingly
stopped working.
I tried connecting a crossed cable between
On 2009-09-20, Dánial Olsen d...@ft.fo wrote:
ifconfig vrx down; ifconfig vrx up fixes your problem?
I don't know. I just experienced this one time and didn't try that, but
perhaps I'll reproduce and try.
Unplug and re-plug the cable a dozen times or so, you'll probably repeat it.
On 2009-12-13, Lars Nooden lars.cura...@gmail.com wrote:
Lars Nooden wrote:
The bios for the net5501 can set the reset switch so that it is under
software control and accessible using GPIO. What device and pin would
that be under OpenBSD 4.6 ?
I went through and did a rather systematic
On 2009-12-14, aniss siyouti aniss.siyo...@gmail.com wrote:
One other question,is it possible to install the file sets of openbsd
without connecting the soekris to internet.Can i transfer these file from
my computer to the soekris using tftp.
For the *.tgz file sets you'll need to use ftp or
On 2010-01-13, Christopher Camden ccam...@cbnco.com wrote:
download -
^^
Bob, try this. Note the dash.
___
Soekris-tech mailing list
Soekris-tech@lists.soekris.com
http://lists.soekris.com/mailman/listinfo/soekris-tech
On 2010-06-24, Ralph Becker-Szendy ra...@lr.los-gatos.ca.us wrote:
The real limitation will probably be amount of memory: To run a 1TB file
server under OpenBSD you really need to have at least 1GB of memory
available to the file system (once the kernel has taken its part), so
you can run
On 2010-07-30, JF Straeten jfstrae...@scarlet.be wrote:
On Fri, Jul 30, 2010 at 08:51:55AM -0700, Shabnam Koosha wrote:
I have a soekris net4526 and I want to change the OS. I want to
install FREBSD on it and its current OS is Pyramid linux (such a
headache). Does any one know how to install
On 2010-10-29, Ed Flecko edfle...@gmail.com wrote:
I've found a few tutorials using the PXE boot method, but that seems
pretty cumbersome.
Really it's not, it saves a lot of rebooting the machine with the
CF hard drive adapter and swapping cards around (which can be fiddly -
you might like to
On 2010-12-18, Nix n...@esperi.org.uk wrote:
Is this a bad time to point out that with http://entropykey.co.uk/ you
could have had a very paranoid hardware RNG with known-working Linux
support? :)
(yes, it probably is, I know.)
I have one on my net5501 and it works perfectly, also feeding
On 2011-02-22, Nick Knight n...@omniis.com wrote:
I am looking to get a feeling for the capability of the soekris equipment. I
have been using the net 4501 for a number of years and just started looking
at the 5501.
As Internet speeds are increasing so has the requirements on these devices.
On 2011-04-14, Steve Clark scl...@netwolves.com wrote:
Look I was only responding to the person that wanted to use *BSD and
not have to make public enhancements, changes, etc,nbsp; he or his
companybr
made. That to me makes it seem he/them was/were only interested in
On 2011-04-16, Ed Flecko edfle...@gmail.com wrote:
Thank you Chris.
:-)
1.) What's the openbsd.vnd file, and how would you mount it?
See the FAQ,
Modify new /etc to include necessary configuration.
2.) If you DO mount it and wanted to edit the /etc files, I can see
how you could configure
On 2011-05-13, Devin Reade g...@gno.org wrote:
What settings should be selected to maximize the chance of booting
from the SATA SSD drive under such circumstances? I suspect that
the problem is the BootDrive setting which for all three machines is
BootDrive = 80 81 F0 FF
there is no
On 2011-06-12, Christopher R. Hertel c...@ubiqx.mn.org wrote:
There are four-port (actually 5-port) switches on PCI cards out there.
These cards provide 10/100/1000 switching between all five ports, but one of
the ports is wired internally to the PCI bus and makes the device look like
a
On 2011-10-20, Ralph Green sfrea...@sbcglobal.net wrote:
If you want to run Ubuntu, think about the version you want to run.
Starting with Ubuntu 10.10, Ubuntu requires a CPU with CMOV support.
They compile it for the 686 architecture, but the CMOV support is the
only thing I have found that
On 2011-12-09, Brandan Rowley brandan.row...@cityofthornton.net wrote:
Windows 7 PC to the network. Performing file transfers from the Windows 7 =
PC's across the VPN tunnel causes the internal interface of the net5501 to =
stop responding. A reboot is needed to get the interface
Might be worth looking at ciphers/hashes and see if switching to
a different type improves things.
Don't automatically assume that hw acceleration is going to help;
it reduces cpu use but has high overheads so it can make things
worse in some cases.
On 2011-12-09, Brandan Rowley
.
And at the other point I consider what Stuart Henderson was mentoring to you.
Perhaps the best at all,
but keeping an eye on the net6501 is also a nice option ;)
I hope this is helping you out.
Kind regards
Frank
-Original Message-
From
On 2011-12-30, Thomas Merkel t...@core.io wrote:
Hello everyone,
i'm looking for an UMTS card for the PCI-Express slot. My Soekris board
is an net6501. One of the important things are that the UMTS card should
work on Linux and has an SIM dock included.
Have someone experience with an good
On 2012-02-29, Ovidiu Predescu ovi...@gmail.com wrote:
Method 1: PXE install
I first tried to use PXE to do the install. I have a small machine
that runs dnsmasq as DHCP and TFTP server. I downloaded the
pfSense-2.0.1-RELEASE-i386.iso.gz and installed the contents of the
file in a directory
On 2012-03-10, Frank Schuhmann f.schuhm...@t-online.de wrote:
Is the bios from the Soekris net6501 ACPI conform?
No
This came up on the list before, see Re: FreeBSD/amd64 on
Net6501 working! from Dec 2011.
___
Soekris-tech mailing list
On 2012-03-20, Ulf Zimmermann u...@openlane.com wrote:
Trying pfsense and FreeBSD9.0 via pxeboot, I get at some point to see
the swirly on my serial terminal but nothing else, it is as if all other
text is white on white or black on black. Has anyone seen something
similar? I am not very picky
On 2012-04-05, Lars Noodén lars.noo...@gmail.com wrote:
I'm trying to install Debian on a net5501 and regardless of whether I
try to get squeeze, wheezy or sid, the same error pops up:
The installer failed to download a file from the
mirror...Retry, Change mirror, Cancel
The
On 2012-04-26, Greg Troxel g...@work.lexort.com wrote:
I wonder if the issue is that dhcp is implemented by bpf, and bpf raw
frames are not bridged.
Yes, exactly. You would need to specify the list of network adapters
in dhcpd_flags in /etc/rc.conf.local, then /etc/rc.d/dhcpd restart.
On 2012/04/29 14:24, Malcolm Herbert wrote:
On Sat, Apr 28, 2012 at 08:05:27PM +, Stuart Henderson wrote:
|On 2012-04-26, Greg Troxel g...@work.lexort.com wrote:
| I wonder if the issue is that dhcp is implemented by bpf, and bpf raw
| frames are not bridged.
|
|Yes, exactly. You would
On 2012-04-27, Lars Noodén lars.noo...@gmail.com wrote:
Thanks to those who responded. The hints helped.
A way to get DHCP over bridged interfaces in OpenBSD is to make the
bridge but assign an IP number to each interface anyway, not just the
first one. dhcpd will squawk about interfaces
On 2012-05-30, Chris Wilson chris-soek...@aptivate.org wrote:
I have a feeling that the serial console, the only way to configure a
Soekris,
is very 1970s. Admittedly it is quite reliable, but slow, fiddly, most modern
computers don't even have a serial port any more, and I've found
Replying to an old(ish) post.
On 2011-12-14, Josh mylis...@gmail.com wrote:
Is there any way to improve the network throughput under OpenBSD?
Some more information came to light...
Here's a workaround until it can be fixed:
sysctl hw.setperf=0
sysctl hw.setperf=100
On 2012-07-11, David Mattes mat...@asguardnetworks.com wrote:
--===0246186895==
Content-Type: multipart/alternative; boundary=14dae93407b385b3c804c4853238
--14dae93407b385b3c804c4853238
Content-Type: text/plain; charset=ISO-8859-1
Hi,
I have changed the Reset button behavior
On 2012-07-20, aa...@aa6qn.sytes.net aa...@aa6qn.sytes.net wrote:
As a TightVNC server. I was looking for the proper Linux kernel graphics
framebuffer to compile into the kernel to support a virtual vnc
framebuffer.
You're probably looking for Xvfb (this doesn't need anything in-kernel).
I
On 2012-07-18, David Mattes mat...@asguardnetworks.com wrote:
--===1034955111==
Content-Type: multipart/alternative; boundary=f46d042dfdc5134ed304c521fa6c
--f46d042dfdc5134ed304c521fa6c
Content-Type: text/plain; charset=ISO-8859-1
Has anyone had success implementing
1 - 100 of 113 matches
Mail list logo