Interesting and thanks for the picture. Does anyone know if it's
possible that replace the passive cooling before the board breaks down?
At least after running now a day,
I can compare to the old passive cooler.
The new one is better, my net6501 is running about 5-6 degree cooler.
I've also
On 05/02/15 22:16, Conrad Kostecki wrote:
I've just noticed, that soekris did changed again the passive cooling.
- http://i.imgur.com/9iOobwx.jpg Cheers Conrad
Interesting and thanks for the picture. Does anyone know if it's
possible that replace the passive cooling before the board breaks
Soekris just replaced a 2+ year old net6501 of mine that had similar
symptoms. And there have been several similar cases mentioned on this list.
Just a quick update..
My soekris net6501 has been also now replaced.
All symptoms are gone and the new mainboard is working perfectly fine.
I've
I had a dead net6501-30 last september.
Worked fine since I got it in October 2011, but when I was switching back and
forth (trying out) m0n0wall and pfSense, it suddenly didn't want to boot
anymore.
Taking the power off for a few minuted made it work again, but it went worse
with every
Hopefully RMA'd boards will help Soekris folks analyse what's gone wrong
with the hardware and whether it can be worked around via BIOS update.
Since the devices don't show any warning symptoms (are running normally)
and the boot failures for some at least are initially intermittent,
there's
anyone?
Greets
Conrad Kostecki c...@conrad-kostecki.de schrieb am Fr, 9.1.2015:
Betreff: Re: [Soekris] net6501 error led / no console / doesn't boot
An: soekris-tech@lists.soekris.com soekris-tech@lists.soekris.com
Datum: Freitag, 9. Januar
and...@atrens.ca
To: Conrad Kostecki c...@conrad-kostecki.de,
soekris-tech@lists.soekris.com
Subject: Re: [Soekris] net6501 error led / no console / doesn't boot
Message-ID: 54b03318.1080...@atrens.ca
Content-Type: text/plain; charset=windows-1252; format=flowed
Hi Conrad,
I did manage
I've already contacted my seller and he replied, that RMA should be possible
without any problems.
But currently, he is out of stock and waiting for new mainboards to arrive. So
my RMA is still waiting.
My net6501 is also running in a rack case.
Today, after several days without power, I've
Conrad Kostecki c...@conrad-kostecki.de schrieb am Fr, 9.1.2015:
Betreff: Re: [Soekris] net6501 error led / no console / doesn't boot
An: soekris-tech@lists.soekris.com soekris-tech@lists.soekris.com
Datum: Freitag, 9. Januar, 2015 20:39 Uhr
I’ve visually
inspected the board
On 1/13/2015 8:10 AM, Jherek Carnelian wrote:
Can that be caused by the power plugs or something?
I had a net6501 die on me just recently, but it's been in the Soekris
provided 1U rackmount (and in turn, power supply), connected to a UPS. I
know that this doesn't necessarily prove anything,
While they have this issue, it can normally also see the Ethernet diodes
flash randomly at low power.
That's interesting. I've something similiar. A character LCD (40x4) with an
USB-Interface is connected to my net6501. When the net6501 does not boot or is
completly dead, I can see the
: [Soekris] net6501 error led / no console / doesn't boot
Message-ID: 54b03318.1080...@atrens.ca
Content-Type: text/plain; charset=windows-1252; format=flowed
Hi Conrad,
I did manage to get to uManager - that was sort of a baud issue - I'd up'ed my
baud rate to 115200 many moons ago and had forgotten
Hi Andrew!
I did manage to get to uManager - that was sort of a baud issue
At least, I can't get even so far. I've tried every baud from 9600 - 115200
(this was set by me).
After I've left the net6501 for about 2 hours without power, the device started
booting again.
I was able to enter
I’ve visually inspected the board and the caps all look good.
In fact the board, living as it has in a soekris case looks brand new.
Apparently my net6501 also died today. I wanted it to reboot due a software
update too.
No its dead. uManager with +++ isn't working and Error LED does not go
this beastie back to Soekris?
--Andrew
On 2014-12-27 12:03 PM, Andrew Atrens wrote:
Thanks Lon - I'll try umanager first, and failing that will rma the board.
--Original Message--
From: Lon Willett
To: soekris-tech@lists.soekris.com
Cc: and...@atrens.ca
Subject: Re: [Soekris] net6501
Thanks Lon - I'll try umanager first, and failing that will rma the board.
--Original Message--
From: Lon Willett
To: soekris-tech@lists.soekris.com
Cc: and...@atrens.ca
Subject: Re: [Soekris] net6501 error led / no console / doesn't boot
Sent: Dec 27, 2014 7:58 AM
Hi,
Soekris just
Hi Alvar,
I’ve visually inspected the board and the caps all look good. In fact the
board, living as it has in a soekris case looks brand new. Apparently ‘no fan’
== ‘no dust’. So I’m going to rule failed cap.
I think it’s more likely the BIOS/firmware is toast. It’s a shame really, as
Hi Folks,
My net6501 had been humming along happily since it arrived in 06/2012 .. I
don’t often need to restart it - the last time was 91 days ago following a
protracted power failure my UPS ran out of juice.
At any rate, last night I noticed that a file system had overflowed and so
deleted
I then brought the unit over to my lab bench and hooked it up to my variable
power supply.
But then something magical happened at 5v, 3 of the network leds (the three that had been in use prior to the failure) lit up.
And so that's where I’m at. Kind of out of ideas, and not sure of how
i have a problem with my net6501-50. It was working well since 2
years but today it didn't boot. I have the power and error leds lit
and nothing on the serial console.
I have the same problem with my net6501-50. Sometimes it helps to enter
the management console (enter +++ over the serial
On Sat, 18 Jan 2014 11:46:24 +0100
ws8pnil...@sneakemail.com wrote:
It seems not working for me. Did you see something on the console
when you type +++. I have nothing on the console (after i power cycle
or type +++ on the console).
after entering +++ you should get a prompt. Make sure you
On Jan 18, 2014, at 5:46 AM, ws8pnil...@sneakemail.com wrote:
i have a problem with my net6501-50. It was working well since 2
years but today it didn't boot. I have the power and error leds lit
and nothing on the serial console.
I have the same problem with my net6501-50. Sometimes it helps
Le 18 janv. 2014 à 14:51, Matthias Flege m.flege-at-in-terminus.net
|Soekris/Forward to (FAC)| f1ek93t...@sneakemail.com a écrit :
On Sat, 18 Jan 2014 11:46:24 +0100
ws8pnil...@sneakemail.com wrote:
It seems not working for me. Did you see something on the console
when you type +++.
On Jan 18, 2014, at 9:52 AM, ws8pnil...@sneakemail.com wrote:
Le 18 janv. 2014 à 15:13, Jed Clear jclear-at-speakeasy.net |Soekris/Forward
to (FAC)| dy7lscn...@sneakemail.com a écrit :
IIRC, the error LED will stay on if it cannot access any bootable media
(somebody correct me
Le 18 janv. 2014 à 16:10, Jed Clear jclear-at-speakeasy.net |Soekris/Forward to
(FAC)| dy7lscn...@sneakemail.com a écrit :
On Jan 18, 2014, at 9:52 AM, ws8pnil...@sneakemail.com wrote:
Le 18 janv. 2014 à 15:13, Jed Clear jclear-at-speakeasy.net |Soekris/Forward
to (FAC)|
Hi.
I have a m-sata ssd drive in my net6501-50. I have try with or without it and
that don’t change anything.
The serial port was not connected when the problem has occured. So i don’t
thing it’s a problem with ground.
Has it ever came to your mind that the board is simply broken? The red
Hi all,
i have a problem with my net6501-50. It was working well since 2 years but
today it didn't boot.
I have the power and error leds lit and nothing on the serial console.
Can someone help me to diagnose the problem ?
Thanks in advance,
On Fri, 17 Jan 2014 19:57:05 +
ws8pnil...@sneakemail.com wrote:
Hi,
i have a problem with my net6501-50. It was working well since 2
years but today it didn't boot. I have the power and error leds lit
and nothing on the serial console.
I have the same problem with my
28 matches
Mail list logo
