Look in /usr/share/doc/speedtouch/
You should only need to edit 2 files
/etc/default/speedtouch
--
#!/bin/sh -e
# add -k when using the kernel mode driver
MODEM_RUN_OPTIONS=-s
# modem firmware
FIRMWARE_FILE=/usr/share/speedtouch/mgmt.o
#
Hi Meri,
I'm trying to get a green stingray Alcatel speedtouch ADSL modem set
up on my Debian Sarge box (kernel: 2.4.24, packages latest from
testing) and have following the instructions in the Debian Sarge HOWTO
(http://linux-usb.sourceforge.net/SpeedTouch/docs/sargehowto.html)
you
Hiya
you probably shouldn't be following that HOWTO: the debian package
maintainer tells me that better instructions come with the package.
OK -- any idea where I'd find them? I tried man speedtouch, etc, but
couldn't find anything and I think I'm being stupid but can't work it
out :-S
This
- Original Message -
From: Meri Williams [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, October 11, 2004 10:38 AM
Subject: [speedtouch] Re: Problems after following Debian Sarge HOWTO
Hiya
you probably shouldn't be following that HOWTO: the debian package
maintainer
Wich version of modem_run are you using?
v1.3 /v1.3.1 try to be smart (remember if the firmware was loaded or not but
this fail in some cases). When this happen, it is bad as the only way I know
to load the firmware really inside the modem again is to reboot.
I'm running 1.3.1 -- but it
On Monday 11 October 2004 09:38, Meri Williams wrote:
Hiya
you probably shouldn't be following that HOWTO: the debian package
maintainer tells me that better instructions come with the package.
OK -- any idea where I'd find them? I tried man speedtouch, etc, but
couldn't find anything
- Original Message -
From: Meri Williams [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, October 11, 2004 11:00 AM
Subject: [speedtouch] Re: Problems after following Debian Sarge HOWTO
Wich version of modem_run are you using?
v1.3 /v1.3.1 try to be smart (remember
Wich version of modem_run are you using?
v1.3 /v1.3.1 try to be smart (remember if the firmware was loaded or not but
this fail in some cases). When this happen, it is bad as the only way I know
to load the firmware really inside the modem again is to reboot.
To see if the semaphore is there
- Original Message -
From: Duncan Sands [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, October 11, 2004 11:03 AM
Subject: [speedtouch] Re: Problems after following Debian Sarge HOWTO
Wich version of modem_run are you using?
v1.3 /v1.3.1 try to be smart (remember
Hi Gilles,
Beware that implementing the firmware loading in the kernel module may
trigger some legal problem.
the kernel gets the firmware from a file living on some disk-drive and
uploads it to the modem. The firmware is **NOT** in the kernel source.
So hopefully it is OK.
Ciao,
Duncan.
PPS: David Woodhouse and I have implemented firmware loading in
the speedtouch
module, so there will soon be no need to use modem_run with the
kernel module.
Hello. I have same questions about modem_run and load firmware in kernel
module. I use other modem, Zyxel 630, and other project,
11 matches
Mail list logo