philchillbill wrote:
> The last time I drove through a red light with my eyes closed at 100MPH
> nobody hit me from the side... :cool: Doesn't really prove anything
> though.
Well, driving through red lights at 100mph blindfolded is likely to have
serious consequences, more so than powering a
I did a clean rescan last night, and yesterday I used LMS to stream to
three players, two Bluetooth speakers, and Bitrate limited streaming to
an iPeng iPad at the same time
I tried to connect USBDAC, but the DAC didnt power up.
So as long as you do not connect anything to the PI four USB, I
Grumpy Bob wrote:
> Well, it has worked so far! Though that has only been a week or so.
> Before that I powered a 3B+ the same way.
>
The last time I drove through a red light with my eyes closed at 100MPH
nobody hit me from the side... :cool: Doesn't really prove anything
though.
Pommes wrote:
> After reading this, I just connected my PI 4 to the USB outlet of my
> Nas.
> Do you think the power is sufficient, even for demanding tasks like
> scanning?
Well, it has worked so far! Though that has only been a week or so.
Before that I powered a 3B+ the same way.
Robert
philchillbill wrote:
> Sure - thats a real PSU and delivers enough juice.
>
> @pommes is the one living on the edge by using a USB port to power a pi.
I bought the 5 V three amp out units, as well. But I just hooked it to
my Nas USB, I will see how this goes. In the worst case I can always
Sure - thats a real PSU and delivers enough juice.
@pommes is the one living on the edge by using a USB port to power a pi.
philchillbill's Profile: http://forums.slimdevices.com/member.php?userid=68920
View this
philchillbill wrote:
> The official pi4 PSU is 15W. A USB port on a NAS is very likely 5V @
> 900mA (if USB3) so 4.5W. Sounds like this is really pushing things...
I use the "canaKit" USB 'C' power supply that is sold with the "CanaKit"
rPi4B package. It shows as 5.1V, 3.5A. I use this on 3
The official pi4 PSU is 15W. A USB port on a NAS is very likely 5V @
900mA (if USB3) so 4.5W. Sounds like this is really pushing things...
philchillbill's Profile: http://forums.slimdevices.com/member.php?userid=68920
garym wrote:
> Clarify how you're using the rPi4 in conjunction with the NAS? Are you
> saying you are simply powering the rPi with the USB outlet of the NAS
> instead of having a separate USB 'C' power supply for the rPi? (and
> then running LMS on the rPi and pointing that LMS to the NAS as
Pommes wrote:
> After reading this, I just connected my PI 4 to the USB outlet of my
> Nas.
> Do you think the power is sufficient, even for demanding tasks like
> scanning?
Clarify how you're using the rPi4 in conjunction with the NAS? Are you
saying you are simply powering the rPi with the
Grumpy Bob wrote:
> On the other hand, an Intel NUC7CJYH from Amazon.co.uk is £169.98.
> I set up a new LMS server with a Pi4 from Amazon at £57.50, with a case
> at about £20. It's powered via USB from the NAS, and I used a 32Gb SD
> card I had lying around the place!
>
> Robert
After
philchillbill wrote:
> The OP's original question was actually about an OS rather than h/w so
> I'll chip in that LMS runs wonderfully under Ubuntu if he wants to
> remove the Win10 install from the machine he bought.
Thanks yes - just wanting to know which is OS provides the most
I think the original draw for the piCorePlayer/RPi combo was as a
replacement for aging SqueezeBox hardware, as it was for me when my Classic
2 died. I needed something that could connect to an LMS (which at the time
was running on a Windows desktop across the room) that also had the audio
outs to
Grumpy Bob wrote:
> On the other hand, an Intel NUC7CJYH from Amazon.co.uk is £169.98.
> I set up a new LMS server with a Pi4 from Amazon at £57.50, with a case
> at about £20. It's powered via USB from the NAS, and I used a 32Gb SD
> card I had lying around the place!
>
> Robert
Already
On the other hand, an Intel NUC7CJYH from Amazon.co.uk is £169.98.
I set up a new LMS server with a Pi4 from Amazon at £57.50, with a case
at about £20. It's powered via USB from the NAS, and I used a 32Gb SD
card I had lying around the place!
Robert
*Home: *Raspberry Pi
The OP's original question was actually about an OS rather than h/w so
I'll chip in that LMS runs wonderfully under Ubuntu if he wants to
remove the Win10 install from the machine he bought. To those promoting
the wondrousness of the pi, some thoughts:
I just bought a new Intel NUC7CJYH on
I have to keep two laptops running 24/7 for business. One Win 7 and one
Win 10. LMS running on both for years without issue.
toby10's Profile: http://forums.slimdevices.com/member.php?userid=12553
View this thread:
My main LMS server is a Pi4 running pCP. I make a periodic backup of the
SD card so that if anything does happen to the card, it's very quick and
easy to get up and running again.
Robert
*Home: *Raspberry Pi 4/pCP7.0/LMS8.0.1/Material with files on QNAP
TS-251A
Touch > DacMagic 100 > Naim
gstalnaker wrote:
>
> I typically schedule a full rescan each night at 2am. Is this not
> advised?
>
A full rescan will result in a lot of write operations on the card,
decreasing it's life time.
>
> Also, which SD cards are considered best when they are the primary
> "partition" for an
PiCorePlayer+RPI4+LMS database / library running from HDD/SSD. (So safe
away from SD card). Better than my Synology NAS better than my WHS2011
NAS! better than my Windows 10. Plays to around 8 headless units. Fab.
Happy Christmas!
gstalnaker wrote:
>
> Also, which SD cards are considered best when they are the primary
> "partition" for an operating system and a running server (like
> piCorePlayer
> and LMS)?
>
Can't really answer that because I don't run a Pi myself (or any other
hardware running from some type of
Osamede wrote:
> Been running LMS on a headless Mac Mini for many years, for compactness
> and quietness. After many years of running LMS on Mac OS, I've found it
> very difficult over the past year or more, with either the server not
> visible, or the library showing empty because no access to
If you're running a Windows machine for other purposes, I'm sure you can
likely make LMS run just fine. However, if you just want a simple LMS
box, small, low power consumption, incredibly reliable, regularly
community maintained etc., then I'm not why you'd look past running LMS
on
gordonb3,
I typically schedule a full rescan each night at 2am. Is this not advised?
Also, which SD cards are considered best when they are the primary
"partition" for an operating system and a running server (like piCorePlayer
and LMS)?
I haven't changed that SD card in a LONG time (since it
I thought there was an issue with the old perl version used on Windows.
https://forums.slimdevices.com/showthread.php?p=988733
Sent from my Pixel 3a using Tapatalk
slartibartfast's Profile:
LMS runs just fine on win10. If you have a machine that's on all the
time anyway why add something else to maintain. As to the windows
updates, you can specify what time of day the machine will restart an
you can set LMS to auto start either when the machine starts or initial
logon (I prefer the
bpa wrote:
> If you haven't used Win10 before, I find the automatic updates which
> reboots the PC at strange or inconvenient times may not be the best
> chocie for a 24/7 LMS server.
That, and of course the fact that a machine capable of running Windows
10 24/7 consumes more power than would
gstalnaker wrote:
> Osamede,
> It is stable for months at a time (though there are times, like this
> very
> morning, where I have to delete LMS prefs/cache and rebuild the library
> after unrecoverable LMS DB errors that no one on this Forum can help
> with).
>
I don't know how often you do a
If you haven't used Win10 before, I find the automatic updates which
reboots the PC at strange or inconvenient times may not be the best
chocie for a 24/7 LMS server.
A Pi4 based system gives good performance, easy to update and also easy
to leave alone for months at a time until you have to
I had zero issues when I was running on a Win10 machine. It just worked.
But I now prefer a rPi4B, with attached USB drive, running
piCorePlayer. Entire setup is smaller than a paperback book, can be
located next to your router, and run 24/7 with essentially zero
intervention. I set one up
Osamede,
Check out using a Raspberry Pi and piCorePlayer (google both). I have two.
One in my bedroom as a headless player (output via 1/8" jack to speaker)
and a second in my living room that is both player (output via digital out
to stereo, HiFiBerry Digi+ addon card, google HiFiBerry for that)
Osamede wrote:
> Been running LMS on a headless Mac Mini for many years, for compactness
> and quietness. After many years of running LMS on Mac OS, I've found it
> very difficult over the past year or more, with either the server not
> visible, or the library showing empty because no access to
Been running LMS on a headless Mac Mini for many years, for compactness
and quietness. After many years of running LMS on Mac OS, I've found it
very difficult over the past year or more, with either the server not
visible, or the library showing empty because no access to the files.
LMS is the
33 matches
Mail list logo