Forget about my request. A clean install of the .qpkg-installer gave me
LMS 8.0.3 and I am happy again.
Spacehead's Profile: http://forums.slimdevices.com/member.php?userid=42289
View this thread:
Noone? Updating my QNAP TS-119 to the actual LMS would be appreciated.
Or is it that I am stuck with 7.9.4 due to the aged armv5 achitecture?
Spacehead's Profile: http://forums.slimdevices.com/member.php?userid=42289
View
After experiencing trouble with my Players (using Philippe's UPnP / DLNA
bridge-plugin) I figured out that my machine to refuse doing updates for
quite a while by now. According to the "information tab" in the LMS
settings I still do run v7.9.4 on my QNAP TS-119:
>
> Logitech Media Server
If you have set NIGHTLY back to 0, it wont update to the latest
nightly.
But another way is to download the latest version of what ever you want,
and put it in the download share of the QNap.
Then stop and start QLogitechMediaServer, it will install that if it
matches the requirements .
Through
Thanks - it's not a space issue. What I did was amend my .conf to set
NIGHTLY=1 and that downloaded and installed "Logitech Media Server
Version: 8.3.1 - 1667914563 @ Tue 08 Nov 2022 02:58:54 PM CET" OK. I've
now set NIGHTLY back to 0. So not sure exactly what happened.
I tried to reproduce the error, but according to me its works.
If you look close, it can not download the newest release file.
What could case this, if there is not enough space on you're server.
badboygolf16v wrote:
> Hi
>
> I've got an issue on my QLMS. Here's the restart output:
>
> >
Hi
I've got an issue on my QLMS. Here's the restart output:
Code:
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./QLogitechMediaServer.sh
restart
There was a error, could not download logitechmediaserver-8.3.0.tgz!
LogitechMediaServer 8.3.0-Tue Aug 3
Youe on a deve;opers version, but disabled the update for it.
Change developers to DEVELOPERS=0 , will enable it again.
Or do ./QLogitechMediaServer.sh clean in the directory, and then restart
it to go back to the nighly.
earthbased wrote:
> I am stuck on on version '8.3.0 - 1664261103 @
I am stuck on on version '8.3.0 - 1664261103 @ Tue 27 Sep 2022'. I have
QLMS v2.31 .QLMS.conf settings of:
UPDATE=1# (1) [ 0/1 Where on 1 it will check
on
officiel update on every startup, 0 will disable it. ]
NIGHTLY=1 # (1) [
What does a perpetual digital signature cost?
earthbased's Profile: http://forums.slimdevices.com/member.php?userid=334
View this thread: http://forums.slimdevices.com/showthread.php?t=108702
I do not have any experience of running things on QNAP - but as a
general rule ... for scanning issues check the LMS scanner.log plus, in
all cases of something odd happening, check the LMS server.log.
Both are available from the LMS Default web interface and you can
increase the logging level
e.d. wrote:
> with the newest QTS 5.0.1.2145 the QLMS gets killed immediately after
> starting because it has no digital signature. I updated QTS to this version,
> too, yesterday.
When I (try to) start QLogitechMediaServer 2.25.1, I (too) get notified
that the app has no digital signature
Zombie wrote:
> Did it have the error with fan at full speed etc?
Sorry for the late answer @Zombie, but no, my TS-251+ did not have the
error with the fan at full speed.
wus's Profile:
Hi digi,
with the newest QTS 5.0.1.2145 the QLMS gets killed immediately after
starting because it has no digital signature.
How can I solve this?
e.d.'s Profile: http://forums.slimdevices.com/member.php?userid=67903
Freek wrote:
> Try to open LMS at port 9002 or other ports.
>
>
> Verzonden vanaf mijn iPhone met Tapatalk
Yes, tried with 9000 & 9002, no difference.
I think the problem is that the Slimserver hasn't been installed for
some reason.
Try to open LMS at port 9002 or other ports.
Verzonden vanaf mijn iPhone met Tapatalk
Freek's Profile: http://forums.slimdevices.com/member.php?userid=63217
View this thread:
Running a TS-439 and recently updated the firmware to 4.2.6
Afterwards, I also updated QLogitechMediaServer to 2.25.01
When i went to open the server (port :9001) there is an error message
'Unable to Connect'
I've deleted and re-installed QLogitechMediaServer and still can't see
the server.
fidtheforce wrote:
> That is great, thanks!!!
> It seems that www.qnapclub.eu is down, is there another repository
> available?
> Otherwise I will wait for qnapclub to be up again to get the new
> version.
Well qnapclub is up and running again but only serves version 2.25.01.
digimaster wrote:
> Thanks for the input.
> Yes found the error, the arm QTS has a very old busybox.
> And from 2.25.00 the new update script uses new commands and options
> from QTS
> Fixed in 2.25.02
That is great, thanks!!!
It seems that www.qnapclub.eu is down, is there another repository
Zombie wrote:
> I know that, I have had it ticked a over a year at least, but I wonder
> what the new feature in the QTS 5 update will mean for QLMS apart from
> that. Let's say QLMS is no longer updated. What happens then?
> I have spent hours and hours recreating my setup after app updates,
mnd wrote:
> Thank you very much, is the 2.25.02 available for download from
> Qnapclub? QTS app center does not show the update for me, currently
> 2.25.01 is installed.
@digimaster Do you have 2.25.02 ready to use? Can you publish on
qnapclub?
Sent from my iPhone using Tapatalk
NAS:
musicalrower wrote:
> Further to my above post, I've taken a punt and gone ahead with buying
> the TS-233. I've successfully configured to use qnapclub, and installed
> LMS.
> The install gave me LMS 8.2.1. The information on the qlms download page
> says it takes the latest nightly, which
Further to my above post, I've taken a punt and gone ahead with buying
the TS-233. I've successfully configured to use qnapclub, and installed
LMS.
The install gave me LMS 8.2.1. The information on the qlms download page
says it takes the latest nightly, which looks to me like it should be
digimaster wrote:
> Thanks for the input.
> Yes found the error, the arm QTS has a very old busybox.
> And from 2.25.00 the new update script uses new commands and options
> from QTS
> Fixed in 2.25.02
Thank you very much, is the 2.25.02 available for download from
Qnapclub? QTS app center
Hi. I'm looking at getting a new NAS. I wasn't going to get a very
powerful one so don't want to run a VM/docker, and didn't really fancy
maintaining a Raspberry Pi in addition to the NAS. So this method looks
like my best option to run LMS.
The NAS I'm thinking of buying is the qnap TS-233. Is
Aesculus wrote:
> That was my issue. There is a work around:
>
> Go to App Center and then the gear icon for Settings. Then in General
> select the "Allow the installation of applications without a digital
> signature." Press Apply.
>
> Now the NAS will not stop an application that does not
Thanks for the input.
Yes found the error, the arm QTS has a very old busybox.
And from 2.25.00 the new update script uses new commands and options
from QTS
Fixed in 2.25.02
fidtheforce wrote:
> I have a QNAP TS-431P running LogitechMediaServer_2.21.00_arm-x41.qpkg
> correctly.
> But when I
I have a QNAP TS-431P running LogitechMediaServer_2.21.00_arm-x41.qpkg
correctly.
But when I upgrade to 2.25 LMS crashes at startup.
Here is the error messages
[/SHARE/CACHEDEV1_DATA/.QPKG/LOGITECHMEDIASERVER] #
./QLOGITECHMEDIASERVER.SH START
DOES NOT EXIST ON NASHOME !
/BIN/SED: INVALID
Hi
I have QLMS running in a holiday home. Sometime between Sept 21 and now
it has stopped working; it plays for around 1 minute and then the player
(Logitech wireless codec) crashes. Is there a known issue with recent
QTS updates, perhaps the disabling of the admin account, that might be
causing
Have you turned off in QTS the Digital Signature requirement?
earthbased's Profile: http://forums.slimdevices.com/member.php?userid=334
View this thread: http://forums.slimdevices.com/showthread.php?t=108702
Can you expand on doesnt work.
Not install, not start? Do you get anything in the logs? What system
are you using (hardware), and what version of QTS?
Sent from my iPhone using Tapatalk
yeomanspc's Profile:
Hello all,
I am a QLMS user. For the past month ever since I have updated to
version 2.25 the software doesn't work. I tried returning to the
previous version but it didn't change anything and it still doesn't
work. I have also tried using the newest version 2.25.01 to no avail. I
don't seem to
kazikskrz wrote:
> Hello.
> I've installed 2.25.01 directly from repo on my TS-351 device with no
> errors. QTS 5
> Added some folders to library - worked fine but... I see "No Player" on
> top on my screen.
> Why?
> Appreciating your help.
Anybody can help me?
Has anyone seen this:
Error 2022-02-23 10:01:56System 127.0.0.1 App Center
App
Installation[App Center] QLogitechMediaServer has an invalid digital
signature. The app has stopped and cannot be installed on QTS. You can
remove it in the App Center.
Has started
wus wrote:
> I didn't upgrade either, just in case...
>
> Did you really try this in QTS 5?
>
>
I am on 5.0.0.1932
Chris
Aesculus's Profile: http://forums.slimdevices.com/member.php?userid=14876
View this thread:
wus wrote:
> Unfortunately, my TS-251+ failed a couple weeks ago. Instead of
> repairing it, QNAP sent me a brand new unit as replacement... that runs
> QTS 5.0.0.1932
Did it have the error with fan at full speed etc? Lots of TS-251s have
that and finally the unit will totally fail, but QNAP
Zombie wrote:
> The only reason why I didn't upgrade QTS yet.I didn't upgrade either, just in
> case...
Unfortunately, my TS-251+ failed a couple weeks ago. Instead of
repairing it, QNAP sent me a brand new unit as replacement... that runs
QTS 5.0.0.1932 :mad:
Aesculus wrote:
> That was my
earthbased wrote:
> dont expose Qnap to Net.Are you joking???
wus's Profile: http://forums.slimdevices.com/member.php?userid=57771
View this thread: http://forums.slimdevices.com/showthread.php?t=108702
Turn off digital dig in settings then stop notifications for LMS.
Also, dont expose Qnap to Net.
earthbased's Profile: http://forums.slimdevices.com/member.php?userid=334
View this thread:
Aesculus wrote:
> "Allow the installation of applications without a digital signature."
I know that, I have had it ticked a over a year at least, but I wonder
what the new feature in the QTS 5 update will mean for QLMS apart from
that. Let's say QLMS is no longer updated. What happens then?
I
Zombie wrote:
> The recent update to QTS 5 also has some function for stopping
> programs/apps of an older version than the recommended one.
> Since QLMS doesn't have any digital signature, how would QTS react to
> it?
> (The only reason why I didn't upgrade QTS yet.)
That was my issue. There
The recent update to QTS 5 also has some function for stopping
programs/apps of an older version than the recommended one.
Since QLMS doesn't have any certificate, how would QTS react to it?
(The only reason why I didn't upgrade QTS yet.)
digimaster wrote:
> This error has nothing to do with busybox, but more with the notice and
> log tool from Qnap.
> It seems you're version is differnet build, and missing a option.
> Will be fixed in next release soon.
>
> But keep in mind, some times it hard, to change or add some thing
>
A strange thing, a app soes not need a digitale signature.
That only used and important when installing or updating
QLogotechMediaServer through the appcentre.
I think some where you have a sercurity option enabled, which is causing
this.
Would suggested to go to the QNap forum, and put youre
This error has nothing to do with busybox, but more with the notice and
log tool from Qnap.
It seems you're version is differnet build, and missing a option.
Will be fixed in next release soon.
But keep in mind, some times it hard, to change or add some thing
because there a very mutch flavors
My QLogitechMediaServer keeps getting stopped by the QNAP NAS because if
does not have a valid Digital Signature. It has not had one for awhile
and up until I updated to FW 5.0.0.1932, it was just a warning I
ignored.
Now after starting it a few minutes later the NAS stops the server with
the
Zombie wrote:
> What's that? Don't find it on my NAS. I have TS-251+, some 5 years old
> maybe...
I'm not the most qualified to answer that, I would explain it as the
"service" that interprets the commands in the command prompt.
The older versions do not support all arguments used in the
jasell wrote:
> busybox
What's that? Don't find it on my NAS. I have TS-251+, some 5 years old
maybe...
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
Zombie wrote:
> Are there still problems upgrading to Qlogitechmediaserver 2.25.01?
> Hoping for a straightforward upgrade without fiddling with Putty and
> other stuff, is there any chance for that?
> Wise from previous upgrades I have no automatic upgrading of my LMS
> server.
It depends on
Are there still problems upgrading to Qlogitechmediaserver 2.25.01?
Hoping for a straightforward upgrade without fiddling with Putty and
other stuff, is there any chance for that?
Zombie's Profile:
Hello.
I've installed 2.25.01 directly from QTS on my TS-351 device with no
errors.
Added some folders to library - worked fine but... I see "No Player" on
top on my screen.
Why?
Appreciating your help.
kazikskrz's
I also see problem on QNAP TS-439+ pro II QTS 4.2.6
See example below and attached log files...
Code:
[admin@QNAP2 LogitechMediaServer]$ ./QLogitechMediaServer.sh stop
/sbin/notice_log_tool: invalid option -- T
Usage: /sbin/notice_log_tool [OPTION]...
digimaster wrote:
> *== QLogitechMediaServer version 2.25.01
> = 04-02-2022
>
> ! fix for those who have a old busybox on there QNap
> Now the upgrade routine, wont give a error. And error on startup/perl
> should be fixed
> ! Correct some other
*== QLogitechMediaServer version 2.25.01
= 04-02-2022
! fix for those who have a old busybox on there QNap
Now the upgrade routine, wont give a error. And error on startup/perl
should be fixed
! Correct some other minors routine, to make it run
I have the same issue on a QNAP TS-509 Pro.
With SSH same 'no such directory' as @rienm.
I'm looking forward for a solution and thank you very much for your
support!
targon's Profile:
@Digimaster
It seems like we are a few with an older version of BusyBox not
supporting your the commands you run in QLogitechMediaServer.sh.
Would it be possible to somehow make use QOptware-NG, I have it
installed but I don't know what it takes to QLogitechMediaServer.s to
running Grep and
Stupide, I did not see ÃÂ old versionsÃÂ; merci Serge!
rienm's Profile: http://forums.slimdevices.com/member.php?userid=58184
View this thread: http://forums.slimdevices.com/showthread.php?t=108702
rienm wrote:
> > Serge21 wrote:
> > Probleme lors de la mise a jour Qlogitechmediaserver 2.25
> >
> > Bonjour,
> >
> > Voila l'erreur que me produit ,l'installation ou la mise a jour
> >
> > TypeDateHeureUtilisateursIP SourceNom de
> > l'ordinateurContenu
> >
Serge21 wrote:
> Probleme lors de la mise a jour Qlogitechmediaserver 2.25
>
> Bonjour,
>
> Voila l'erreur que me produit ,l'installation ou la mise a jour
>
> TypeDateHeureUtilisateursIP SourceNom de
> l'ordinateurContenu
> Erreur2022/01/1421:04:27
Probleme lors de la mise a jour Qlogitechmediaserver 2.25
Bonjour,
Voila l'erreur que me produit ,l'installation ou la mise a jour
TypeDateHeureUtilisateursIP SourceNom de
l'ordinateurContenu
Erreur2022/01/1421:04:27squeezeboxserver127.0.0.1
Hi Digimaster...
I tried upgrading QLMS to latest version, but it seems the scripts are
not compatible with my unit...
I used to run previous version, I got a lot of errors of bad command
during launch bad then it run fine.
I upgraded from the AppCenter...
Please find my
rienm wrote:
> Please can someone help me. In what directory should I find
> ./QlogitechMediaServer.sh? With some commands I remember from Unix I
> came within the / , /usr, /var etc. Till now I did not find the
> directory
Well, I found out and I am in the /gpkg/LogitechMediaServer directory,
rienm wrote:
> I am in my qnap nas as admin, within the root file; when I give a
> command as mentioned at fi page 84, fi ./QlogitechMediaServer.sh status
> I get the message -sh /QlogitechMediaServer.sh No such file or
> directory
>
> I dont understand
.
Please can someone help me. In what
I am in my qnap nas as admin, within the root file; when I give a
command as mentioned at fi page 84, fi ./QlogitechMediaServer.sh status
I get the message -sh /QlogitechMediaServer.sh No such file or
directory
I dont understand
.
Freek wrote:
> Did a quick Google search for you:
> https://www.qnap.com/en/how-to/knowledge-base/article/how-to-access-qnap-nas-by-ssh[[/I]
>
>
>
> When I asked Digimaster december 28, I was not familiar with SSH clients
> (like PuTTY) at all. After his answer I spend about 2 to 3 mornings
rienm wrote:
> Uh, I am on a Mac, seems not simple to install and use PuttyÂ
Did a quick Google search for you:
https://www.qnap.com/en/how-to/knowledge-base/article/how-to-access-qnap-nas-by-ssh
>
to complicated for me..
When I asked Digimaster december 28, I was not familiar with
Freek wrote:
> Suggestion:
> 1) Allready installed the latest QTS Firmware on your NAS?
>
> 2) Download and install Putty on your laptop/PC and connect through SSH
> with your Nas via NAS-IP and port 22
> Start Putty with User: admin and Pasword = MAC Adres without
> hyphens. 00-1B-44-11-3A-B7
rienm wrote:
> I just updated Qlogitechmediaserver to25. Same as Freek had. I
> really do not know how to find the QlogitechMediaServer.log but I tried
> ports 9001 to 9011 no result. Please help me, I am just a user.
> What can I do to keep on using my Logitech touch.
>
> thanks, Rien
Freek wrote:
> Problem Solved!
>
> I used Putty to read te QLogitechMediaServer.log
> This log mentioned that LMS uses port 9002 (instead of default 9001)
>
> Digimaster, thnx for help!
> Kind Regards, Freek
I just updated Qlogitechmediaserver to
25. Same as Freek had. I really
do not know
wowo wrote:
> I have an QNAP TS-253D
> Firmware 5.0.0.1870 Build 20211201
> I am using QLogitechMediaserver 2.25.22 from QNAPVlub.eu, and everything
> is working well.
> Expect that I get the warning: There is no digital signature.
> So I must "allow installation of applications without a valid
digimaster wrote:
> First of al at installation, what did it tell you. Second try to restart
> it from the qnap appcentre, look inside the log of the QNap nas. And
> look in the QNap forum how to acces a SSH shell.
Thanx for replying and help Digimaster ;-)
At installation:
After adding
Freek wrote:
> I tried to instal QLogitechMediaServer on my TS-453 PRO with firmware
> 5.0.0.1891. But did not succeed.
> IP of the NAS is 192.168.2.4:8080. Internet access works fine. Iv no
> problem with Firmware updating.
>
> First I tried to add the QnapClub store to the Qnap App center
I tried to instal QLogitechMediaServer on my TS-453 PRO with firmware
5.0.0.1891. But did not succeed.
IP of the NAS is 192.168.2.4:8080. Internet access works fine. Iv no
problem with Firmware updating.
First I tried to add the QnapClub store to the Qnap App center by adding
No for now the latest is still 2.25.00.
Work on 2.25.01 but not yet released.
mnd wrote:
> Just checking - is there a newer version of QLMS than 2.25.00?
> If it's there, my AppCenter on the QTS doesn't show the available
> update, could this have something to do with my NAS's processor
>
Just checking - is there a newer version of QLMS than 2.25.00?
If it's there, my AppCenter on the QTS doesn't show the available
update, could this have something to do with my NAS's processor
architecture - armv7l?
mnd's
I have an QNAP TS-253D
Firmware 5.0.0.1870 Build 20211201
I am using QLogitechMediaserver 2.25.22 from QNAPVlub.eu, and everything
is working well.
Expect that I get the warning: There is no digital signature.
So I must "allow installation of applications without a valid digital
signature"
for
BobW wrote:
> QLMS was running for several years.
> When I changed from provider and got the Ziggo Connectbox I had some
> problems, but could resolve them by restarting LMS in a TTY session.
> Now suddenly the SQB Touch and Duet stopped working indicating to
> replace the 7.9 version by a
Hi!
I installed QLogitechMediaServer from the qnapclub.eu repo on a TS-453
running QTS5.
Everything seems to work properly (Web GUI with Material Skin, TIDAL,
local FLAC, ...) but the Qobuz plug-in creates time-out errors like:
Code:
[21-12-16 17:51:37.0103]
It seems that there is no access to internet on the QNap.
If you changed from internet provider, have a close look on the
networksettings of you're QNap nas network settings..
Otherwise visited the QNap forum, to look there for more info.
The trouble lays in the QNap nas no internet access.
QLMS was running for several years.
When I changed from provider and got the Ziggo Connectbox I had some
problems, but could resolve them by restarting LMS in a TTY session.
Now suddenly the SQB Touch and Duet stopped working indicating to
replace the 7.9 version by a newer version.
I noticed
digimaster wrote:
> Strangely enough QLMS will do nothing with the SSOTS/SSODS directories.
>
> But if previous settings are lost, you could check if a backup is made.
> Normally QLMS always tries to make a backup off settings and installed
> plugins.
>
> In ssh shell do "ls $(/bin/acho
digimaster wrote:
> Yes that is the trouble, the busybox version is very old.
> Curios what QTS version is on youre QNap?
>
> The thing is busybox is part of QTS, but now we found the trouble know a
> way to work around it.
>
> As you see sending me the QLogitechMediaServer.log.err is
Zombie wrote:
> So the prospect to upgrade to QTS 5 and QLMS 2.21, QTS 5 and QLMS 2.25
> or to QLMS 2.25 and QTS 4.x is not a good idea, then? Better not moving
> in the boat and stick with 2.21 and 4.x?If you would follow the threat, you
> would have read that the trouble has
some thing to do
So the prospect to upgrade to QTS 5 and QLMS 2.21, QTS 5 and QLMS 2.25
or to QLMS 2.25 and QTS 4.x is not a good idea, then? Better not moving
in the boat and stick with 2.21 and 4.x?
Zombie's Profile:
Strangely enough QLMS will do nothing with the SSOTS/SSODS directories.
The same with the SlimServer/ directory.
But is previous settings are lost, you could check if a backup is made.
In ssh shell do "ls $(/bin/acho /share/*/Public)"
Now look at the files QLMS_BCKUP_?.?.tgz.
If they are files
Yes that is the trouble, the busybox version is very old.
Curios what QTS version is on youre QNap?
The thing is busybox is part of QTS, but now we found the trouble know a
way to work around it.
As you see sending me the QLogitechMediaServer.log.err is important.
The same for
digimaster wrote:
> Thanks for sending the reqeust QLogitechMediaServer.log.err.
>
> Now i can see where the error lays.
>
> Could you do the following comaands between "" and give me the output
>
> "which mktemp"
> "/bin/echo $(/bin/mktemp -q)"
> "/bin/mktemp -h"
>
> And i`m curious which
Thanks for sending the reqeust QLogitechMediaServer.log.err.
Now i can see where the error lays.
Could you do the following comaands between "" and give me the output
"which mktemp"
"/bin/echo $(/bin/mktemp -q)"
"/bin/mktemp -h"
And i`m curious which model QNap are you using.
mnd wrote:
>
earthbased wrote:
> Logitech Media Server Version: 8.3.0 - 1636104857 @ Fri Nov 5 11:02:25
> CET 2021
> Hostname: Qnap-TS-251A
> Server IP Address: 192.168.33.4
> Server HTTP Port Number: 9001
> Operating system: QLMS 2.X (QNAP TurboStation) [Debian 9 stretch] - EN -
> utf8
>
> Model:TS-251A
>
digimaster wrote:
> Look at all the information you send,
>
> e could be youre problem.
>
> FilesystemSize Used Available Use% Mounted on
> tmpfs16.0M 0 16.0M 0% /share
>
> Please try "/bin/df -hP $(/bin/echo /share/*/.qpkg"
> And have
Up until now, you are the only one with this problem.
But i think why, and maybe a small change, which is gone be fixed in
2.25.01 which is gone be released soon.
mucbox wrote:
> Hi Digimaster,
>
> thank you, and all the other helpful people, for keeping the LMS
> universe alive.
>
> I
Look at all the information you send,
e could be youre problem.
FilesystemSize Used Available Use% Mounted on
tmpfs16.0M 0 16.0M 0% /share
Please try "/bin/df -hP $(/bin/echo /share/*/.qpkg"
And have a clode look on avaible space.
Logitech Media Server Version: 8.3.0 - 1636104857 @ Fri Nov 5 11:02:25
CET 2021
Hostname: Qnap-TS-251A
Server IP Address: 192.168.33.4
Server HTTP Port Number: 9001
Operating system: QLMS 2.X (QNAP TurboStation) [Debian 9 stretch] - EN -
utf8
Model:TS-251A
Current firmware version:5.0.0.1853
Zombie wrote:
> I opened a thread about QLMS and QTS 5.0 to separate it from this
> longrunning thread.
> Now there are four alternatives:
> 1. QTS 4.x and QLMS 2.21 - no changes
> 2. QTS 4.x and QLMS 2.25
> 3. QTS 5 and QLMS 2.21
> 4. QTS 5 and QLMS 2.25
>
> I use LMS 8.2.1 without
I opened a thread about QLMS and QTS 5.0 to separate it from this
longrunning thread.
Now there are four alternatives:
1. QTS 4.x and QLMS 2.21 - no changes
2. QTS 4.x and QLMS 2.25
3. QTS 5 and QLMS 2.21
4. QTS 5 and QLMS 2.25
I use LMS 8.2.1 without automatic upgrade to anything
If I
digimaster wrote:
> Thats a strange error, has i have not changed any thing, regarding perl
> or files in the file-systeem.
> Could you please send me the output of "./QLogitechMediaServer.sh"
>
> And then one complety until its competly finshed ?
>
I lost the output/logs from my attempts
digimaster wrote:
> Thats strange but okay lets check some stuff.
> The other error, was on missing slimserver.pl.
> In the LogitechMediaServer directory could you do " ls -l SlimServer/"
> Also please /bin/df -hP /share/
> And put the output here.?
" ls -l SlimServer/":
drwxr-xr-x7
digimaster wrote:
> *
> == QLogitechMediaServer version 2.25.00
> = 03-12-2021
>
> + Update routine changed, now besides nightly there is a developers
> option.
> ( Now based on lms-update.sh from picoreplayer source. Thanks to scala
> for
If i' m correctly you should use TS-X41.
digimaster wrote:
> Thats strange but okay lets check some stuff.
> The other error, was on missing slimserver.pl.
> In the LogitechMediaServer directory could you do " ls -l SlimServer/"
> Also please /bin/df -hP /share/
> And put the output here.?
Thats strange but okay lets check some stuff.
The other error, was on missing slimserver.pl.
In the LogitechMediaServer directory could you do " ls -l SlimServer/"
And put the output here.?
mnd wrote:
> But I'm not sure what exactly I should ask on the QNAP forum.
>
> It worked with QTS 5
1 - 100 of 934 matches
Mail list logo