I testing to install LogitechMediaserver on Qnap ts-453a, whitout ssods
Works like a charme, but not all the added binhelpers work fine.
If i got it work, looking for away the make it in a qpkg.
digimaster's Profile:
linkinpin wrote:
> I just saw a ssods faq with an entry with the title -Use binary Perl
> modules shipped with SBS-.
>
> It references a file called -/opt/ssods4/share/sbs/shipped-binaries-
>
> # List of files shipped with SSODS that are also in $SSIDR. All
> paths/files
> # listed here are
eduardoo wrote:
> Anyone else experienced these issues or know how to fix them? Thx.
Same issue here, got a ts-453A with intel celeron inside.
And run LMS through ssods.
The problem is, that the binarch stays on i386.
And even if you copy the bins from the i686 directory to i386, the
plugin
Which lms app do you use?
*
Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Serval raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*
Oke what you cab try, is logon with a ssh shell.
Then do [ cd /share/*/.qpkg/LogitechMediaServer/ ]
And then [ ./LogitechMediaServer.sh stop ], and the [
./LogitechMediaServer.sh failsafe ]
The check if its then running do [ ./LogitechMediaServer status ], on
which it should say something like (
Zombie wrote:
> Got 7.9.0 in a container on a QNAP NAS, want to install the "proper" app
> as per other thread in this forum.
> Is there a way to transfer all the settings in my old LMS to the new one
> I want to install, wtihout going through the tedious process of
> repeating all settings
*New release of LogitechMediaServer for Qnap x86_64 version 1.0
'Qnap LogitechMediaServer 1.0 x86_64' (https://goo.gl/f36W2p) :D
Change log version 1.0
+
Here it is the first officieel release of LogitechMediaServer for QNap
Tried if ShairTunes2W, but it wont load the plugin.
So no at the moment its not working, so have to look in to this.
I needed to know which perl modules are need to make it work.
So maybe to make it work in future releases.
scala wrote:
> Excellent initiative! This will fill a very huge gap!
You can stop en start LogitechMediaServer form the app store, through
the webgiu from QNap.
Or logon through shh shell, and them do [ [cd
/share/*/.qpkg/LogitechMediaServer/ ], [ ./LogitechMediaServer.sh
restart ] and then exit to logout.
Be aware it will take a few minutes, before you can use
Some times it takes a few minutes, before you can acces the webgui.
Especially when a lot of new plugins must be installed, of when you have
copied a old prefs directory to the Slimserver directory.
Zombie wrote:
> LMS won't start after I copied the prefs directory from the LMS in the
>
Glad to hear its working on you`re QNap.
Lucky that LMS is running on QNap again, and integrated in the operation
systems off QNap.
Next version will be a update of LMS to the latest version of LMS
nightly build.
Also working on a way, the init script, will make a log to keep track of
any
Zombie wrote:
> Is this a normal app for QNAP or a container thingy?A normal app.
Verstuurd vanaf mijn H30-U10 met Tapatalk
*
Qnap TS-453a with Optware-NG and LogitechMediaSever 7.9.1
Serval raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to
mherger wrote:
> Hi digimaster
>
> thanks a lot for easing LMS installation on the QNAP! What I was
> wondering about is why the package would come with LMS pre-packaged?
> Couldn't you have a much smaller image which then would install whatever
>
> latest nightly? Y
we could look to included it in the
QPKG.
At the moment looking on a way to also make it work on x86 based Qnap
nas systems.
Greeting
boyracer wrote:
> Thanks Digimaster. My QNAP is based on the Arm chip. Would you mind
> sharing the code you used so I could look at it and see if I
Thanks karlek you`re so right.
it`s chmod -R 0775 (directoryname)
karlek wrote:
> digimaster only forgot the 755 in the first chmod command.
*
Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Serval raspberry with hifiberry amp+ and picoreplayer.
L
steklo wrote:
> Hello,
>
>
> 4) Most recently digimaster posted his new package for a direct
> installation onto QNAP which should be up
>
> 1) seems to be a bit tricky and obviously needs some command line
> editing.
> The advantage of that method is you can e
If you copied some directory`s from you old LogitechMediaServer.
Do logon to you`re Qnap by ssh shell, do [ cd
/share/*/.qpkg/LogitechMediaSever ] and then [ chown -R
squeezeboxserver SlimServer/ ] and then [ chmod -R SlimServer/ ].
Then do [ cd (to the root directorys where you music
boyracer wrote:
> Hi
>
> Before I take the plunge and unistall my old squeezebox QPG can you
> confirm if this will work on my QNAP TS-219PII Running Version 4.33.0404
> software?
>
> ThanksAs I explain Logon a ssh shell, and do uname - m, should there show
x86_64.
If so you can install it.
I DO APOLOGIZE FOR VERSION 1.01. AFTER RELEASING IT, NOTICED, THAT LMS
DID NOT START FROM THE QNAP WEBGUI.
SO THAT'S WHY I RELEASED THE VERSION 1.01A WHICH HAS THE PROBLEM FIXED.
'LogitechMediaServer voor Qnap x86_64 versie 1.01a'
(https://goo.gl/Aj2fUi)
*
Qnap TS-453a, with
eduardoo wrote:
> Hi,
>
> I recently find that full text search plugin doesn't work with Unicode
> on my setup (469L with your qpkg). See thread here:
> http://forums.slimdevices.com/showthread.php?108322-LMS-search-doesn-t-support-Unicode
> I have no idea whether it would in any way be
eduardoo wrote:
> Thanks. Is there any possibility that it is related to the qpkg? If
> so, maybe I can also let Digimaster know about the issue.
It could more a thing regarding the setup off youre NAS.
Check following, logon in a ssh shell, and do set, look for
LANG=en_US.UTF-8
cphan wrote:
> Just installed this app on my new TS-251+, works great right out of the
> box.
>
> Should I add your Optware package, what does it add?
>
> ThxIt's nice te read, that it works on you're Qnap. And yes tried to make
it work right out of the box.
The Optware gives you lame
*New release of LogitechMediaServer for Qnap x86_64 version 1.01
'LogitechMediaServer for Qnap x86_64 version 1.01'
(https://goo.gl/g8WBxz) :D
Change log version 1.01
+
* Add logfile function. It will write a logfile in the root
janus wrote:
> Sorry I didn't check with uname -m and it appers that my QNAP is not
> supported by your package... ;-( Maybe can you make it available in the
> future? Thank you very much!At the moment it is only working on 86_64. Still
> looking for more
information how to make it work on
*Out now Qnap Optware-NG version 2.0.
The best solution the get the best out of you`re LogitechMediaServer.
It has support for flac, lame, mac(ape) and many more
( I would suggest 'Optware-NG'
(https://forum.qnap.com/viewtopic.php?f=124=137710=648516#p648516),
as it has the most audio
In the webgui of you`re Qnap control panel there is a option to set
you`re country/region.
Otherwise check the Qnap form, as unicode is handle by the Qnap itself.
LogitechMediaServer uses the settings for this from the Qnap QTS
system.
'https://forum.qnap.com/search.php?keywords=unicode]Look
Tested it and same error on soc in the x86_64, it complains about the
missing libgomp.so.1.
Did a ldd x86_64 and got this.
ldd sox
linux-vdso.so.1 (0x7ffdee3b9000)
libgomp.so.1 => not found
libm.so.6 => /lib/libm.so.6 (0x7f93321cb000)
libpthread.so.0 => /lib/libpthread.so.0
*I would advise, to install it through the AppCenter of QNap!
'Here the instructions, how to add QnapClub appstore, to QNap's
AppCenter' (https://www.qnapclub.eu/en/howto/1)
' QLogitechMediaServer in the QnapClub appstore, here there is always
the latest version !'
But if you look in the
earthbased wrote:
> I noticed that when I restart my QNAP TS-251A QLMS is not updating LMS
> to latest nightly. I am stick on 4/27/18.
Upgrading LogitechMediaServer to 7.9.2-1524841547, please wait !
Logitech Media Server: Unix Tarball (i386, x86_64, i386 FreeBSD, ARM
Version 1.09a has the i686 perl 5.24.4 build on Glibc version 2.19.
It seems that some older Qnap systsems have a ld-linux.so.2 older
version.
So then you get the error, that it wont start.
At the moment looking for a way around this.
The perl i686 5.24 was build by QNap, and don know itch
*New release of QLogitechMediaServer V1.09.a for Qnap QTS 4.1 or higher
with x86/i*86/x86_64 ( 20-05-2018 ) :cool:
MDS5 check [ d7321e2b4917af803e75a6231bbe26c9
LogitechMediaServer_1.09.b.qpkg ]
'QLogitechMediaServer_V1.09.b for Qnap x86/i386/i686/x86_64 with QTS 4.2
or higher !'
mherger wrote:
> > Sure the i386-linux-thread-multi-64int can be found.
> > But if you try to use that, get a error from image scale, found
> version
> > 0.14 but needs 0.08.
>
> Hmm... we ship 0.11 for 5.20+.
>
> > As i'm make the QNap QlogitechMediaServer, running agains this trouble
> >
There is no need to upgrade, if you don't use anything like airpplay.
The new release is only a upgrade for perl from 5.24 to 5.24.4 and
support for shairtunes2.
earthbased wrote:
> So no reason to upgrade from v1.09a if running OK on modern QNAP?
*
maintainer of QLogitechMediaServer,
As i testing and try noticed, that from perl 5.20 there is no
support for i386 ( 32bits )
I missing the i386-linux-thread-multi directory.
Is there a special reason for this ?
Sure the i386-linux-thread-multi-64int can be found.
But if you try to use that, get a error from image scale, found
PHAZBLADE wrote:
> I have LMS running on several Pi's ... went to those after Qnap ditched
> LMS, and they work great
>
> But been keeping my eye on this Install, and last night decided to have
> a go
>
> Qnap TS-569, need to do a restart before doing the latest Qnap Update,
> did that OK
>
>
mherger wrote:
> > Qlogitechmediaserver is the installation packets for QNAP nassystem.
> It
> > always on any update installs the latest tarball packets from the
> > nightly. Yes some where 32bits and perl support got lost.
>
> I'm not sure I understand. Are you using our tarballs and the
PHAZBLADE wrote:
> I have LMS running on several Pi's ... went to those after Qnap ditched
> LMS, and they work great
>
> But been keeping my eye on this Install, and last night decided to have
> a go
>
> Qnap TS-569, need to do a restart before doing the latest Qnap Update,
> did that OK
>
>
I know about the -Duse64bitint options ad build, But then it looking for
i386-linux-thread-multi-64int directory. And at startup there is a error
about images scale version incorrect found version 0.14 but need 0.08.
And if I am correct with this option, it 32 bits with 64 internal
support. Why
Oke here the info from perl -V
Summary of my perl5 (revision 5 version 24 subversion 4) configuration:
Platform:
osname=linux, osvers=2.6.22-14-server,
archname=i686-linux-thread-multi
uname='linux ubuntuserver7.10nasbuilder32bits 2.6.22-14-server #1
smp tue feb 12 08:27:05 utc 2008 i686
I build perl from source, with included module provided bij perl.
If i build a the x86_64/AMD64 perl it works great, same source same
included modules.
Seem for the i686 with -Duse64bitint, works on support systems.
Is just the version which is looking for i386-linux-thread-multi, which
gives a
you're NAS system should be in the same network range, to fix this be
sure that I on a adres like 192.168.1.XXX. Then the player will be
found.PHAZBLADE wrote:
> Hi, not sure how to do any of that, but ..
>
> Tried the V1.08, which came up with only one error
>
> 25084
>
> So went to the
In a few days, i will release version 1.03.
Found some info regarding unicode and LMS, and it thats release will ad
a extra option which hopefuly will solve you're problem.
eduardoo wrote:
> Hi. Sorry for the late feedback.
>
> Been out of town lately and didn't get to do the above
KeBul wrote:
> Hi Digimaster,
>
> Good work on this, thanks very much, really appreciate your effort.
>
> I've tested this a few times on xS-n51+ QNAPs and it works very well,
> easy and straightforward install and somewhat faster than my RPI.
>
> The abilit
david572366 wrote:
> Hi Digimaster
>
> Now I go back to LMS 7.7.2,I will try this after I upgrade to QTS
> 4.3,Thanks!Oké but be aware SSOTS should not be installed. QTS 4.2. is missing
several commands, where QTS 4.3 has them out of the box. That's where it
goes wrong, looking on a
There is something wrong, with you're Qnap, Perl is ELF64/64 bits.
And this error on you're system should be fixed.
As that's says it ELF32/32 bits,
/usr/bin/perl: error while loading shared libraries: libnsl.so.1: wrong
ELF class: ELFCLASS32
greetings
qnapfan wrote:
> @digimaster
>
*New release of LogitechMediaServer for Qnap x86_64 version 1.02 (
25-12-2017 )
MDS5 check [ caa0ba05cca9d7d0f5748605637f8908
build/LogitechMediaServer_1.02_x86_64.qpkg ]
'LogitechMediaServer for Qnap x86_64 version 1.02'
(https://goo.gl/Bs4HGM) :D
= Qnap LogitechMediaSever
earthbased wrote:
> Here is what I did after backing up Prefs and Cache:
>
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./.uninstall.sh*
> Shutting down Logitech Media Server...
> Stopping SqueezeboxServer 7.9.1-1513400996 (please wait) ... OK.
> Stopping thttpd-ssods .. OK.
> deluser:
'LogitechMediaServer for Qnap x86_64 version 1.03.2beta'
(https://goo.gl/P1q8K6) :D release 09-01-2018
Minor fix on stopping LMS.
This should do a proper job !.
dolodobendan wrote:
> Even after a reboot I couldn't stop LMS. But I could install the new
> beta on top of it. Booyah!
>
> The
dolodobendan wrote:
> With 1.03.2beta the stopping problem is back.
>
> In other news:
>
> Important things I learned today with your installer, maybe helpful for
> others:
>
> With "Advanced Folder Permissions" enabled and "Support Windows ACL"
> disabled, the user "squeezeboxserver" has to
earthbased wrote:
> I cannot REMOVE v1.03.Should I just go ahead and install v1.02?Yes
> download the v1. 02 version, remove v1. 03 and then install v1. 02.
Send through tapatalk!
*
maintainer of Qnap-LogitechMediaServer and Qnap-Optware-NG.
Qnap TS-453a, with LogitechMediaSever 7.9.1
Oke tested stoping Qnap-lms from app-store, and strange give the error.
So this will needs attenion to solve.
Strangely enough Qnap-LMS is stopped.
So for now i need to do some investigation on this subject, and this
will take some time to solve.
For earthbase, install v1.02 and not the beta
I would first backup you're Cache and prefs directory some where safe.
So you can set you're configuration back !
earthbased wrote:
> Finally got ssh working from my Mac to Qnap again (Qnap upgrade broke
> ssh)
>
> Regarding SSOTS, it looks like everything is in /opt/ssods4. I see
>
dolodobendan wrote:
> I'll do the honors and tell my findings.
>
> The good things:
>
> > > >
- It's in Ressource Monitor now! Whooo!
> > >
>
> The neutral things:
>
> > > >
- It took a VERY long time to start (it was maybe ten seconds in
> 1.02) [*Edit: My bad, it did
Just maybe a few small adjustments, test it if it solve it ?
'LogitechMediaServer for Qnap x86_64 version 1.03.1beta'
(https://goo.gl/z2AN1N) :D release 09-01-2018
dolodobendan wrote:
> I'll do the honors and tell my findings.
>
> The good things:
>
> > > >
- It's in Ressource
dolodobendan wrote:
> I'll do the honors and tell my findings.
>
> The good things:
>
> > > >
- It's in Ressource Monitor now! Whooo!
> > >
>
> The neutral things:
>
> > > >
- It took a VERY long time to start (it was maybe ten seconds in
> 1.02) [*Edit: My bad, it did
Yes if they keep using the same way of number. it will even go up to
9.9.9.
But also made a escape, if something should change.
dolodobendan wrote:
> Does this mean it would automatically install version 8.0.0 if it finds
> one? I've learned to be cautions with major updates...
*
maintainer
Oke here i hope a fix, let me know if it works.
This is specially for QTS 4.2
'Qnap_LogitechMediaServer x86_64 version 1.02a QTS 4.2 fix'
(https://goo.gl/aFnAx3)
david572366 wrote:
> Hi digimaster
>
> My QTS is 4.2.5,rest info I need to go back home to check it. But I am
> not g
Be patience there are a few things, that i need to fix before release
1.03.
And waiting on input regarding QTS 4.2 and lower.
Almost ready, but need a little more adjusting and cleanup.
Making it besides working, studie, enjoying music and having a life.;)
dolodobendan wrote:
> That is
There should be a directory called Download.
in a ssh shell do [ cd /share/*/], and [ ls ]
Then it must show a directory Download.
Which QTS version and Qnap nas systemen do you use ?
Workaround is not present,
in a ssh shell do [ cd /share/*/] and [ mkdir -p -m 0775 Download/ ]
But still
Keep in mind, v1.03 is still a beta version.
Which version do you have installed ?
Latest is v1.03.3beta
The latest stable version is V1.02
MathSWE wrote:
> Hi!
>
> After the 1.03-update my Squeezebox Radios cant find the Logitech Media
> Server anymore. My Boom works, and my Duets are
earthbased wrote:
> More:
>
>
> Not sure why /Share says 100% used but just a virtual drive? I have
> RAID1 with 3 TB WD RED Drives and /share/MD0_DATA is at 35% used.
And no the /share directory in the root, is the directory where all the
important directory can be found.
So maybe there
earthbased wrote:
> Manual install of v1.03.3beta went OK, no Qnap errors. Now I will try
> to start LMS:
>
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./LogitechMediaServer.sh
> start
> Please wait have to build LMS from scratch !
> 8.0.0
> 7.9.9
> 7.9.8
> 7.9.7
> 7.9.6
> 7.9.5
> 7.9.4
>
MDS5 check [ 1d4ea3ef0e3b4a715e87b10555f777ed
LogitechMediaServer_1.03.beta_x86_64.qpkg ]
This version should fix disable error from Qnap appstore, and on new
installation will install LMS !.
All older beta V1.03 are removed !
Tested it on my own Qnap ts-453a !
'LogitechMediaServer for Qnap
earthbased wrote:
> How do I remove v1.03beta? I cannot remove it from App center.Logon on
> you're Qnap by ssh shell, do ( cd /share/*/.qpkg/) and then (
rm - R LogitehMediaServer). After this you can install a new version
through the appstore. Be aware you will also remove any settings.
Already possible, in the .QLMS.conf file you can disable it !
Have a look, you can even controle al the options for the startup of
LMS.
For example i use noupnp, nodebuglog, noinfo, noimage, novideo and
nobrowsecache.
dolodobendan wrote:
> An option to disable major updates could come in handy.
I was think about youe installation trouble.
And remember was running in to the same trouble a few months ago.
I my case the trouble was gzip from optware.
So are you running a optware/entware or something like that.
If so disable it before installing QLogitechMediaServer.
The optware/entware
The beta is out, and has the UTF8 actived on startup.
Could you test if its working now ?
http://forums.slimdevices.com/showthread.php?108292-LogitechMediaServer-for-Qnap-x86_64-with-qts-4-2-or-higher
eduardoo wrote:
> Hi. Sorry for the late feedback.
>
> Been out of town lately and didn't
dolodobendan wrote:
> Here nothing has changed, ÐÑаÑки is found while кÑаÑки is not.
> Maybe it behaved that way before switching to your installer, maybe not.
> I do not know, sorry. Could even be a bug in LMS search.
>
> Edit: Speaking of bugs, in Firefox it shows the unicode text
Yes it sure is, not a big deal making it working on you're own Qnap.
But keeping in mind, it should also work on other Qnap devices is a big
deal.
I started working this way in april/may last year, as was getting more
and more trouble with the SSOTS/SSODS way.
And it stil is working great for,
Don't look at the 346 error, is just a check. Nothing to do with the
startup.
This error will be fixed in next release.
If you looked proper on the logfile, you would have nticed to permision
error on the prefs directory.
And i see something about ssots.
in the SlimServer directory you could
Try to included some checkup on installation, will be in on the next
release.
In a ssh shell could you do df -h /share
The /share is always 0% but there are more.
Strangely some is going wrong on you're Qnap while extracting the LMS in
the SlimServer/.
The problem is, tar has many errors code,
dolodobendan wrote:
> You're very welcome, glad I could help!Through you're input could make a
> better version that runs on different
systems. Next step trying to included support for x86_64, i686.
Send through tapatalk!
*
maintainer of QLogitechMediaServer and Qnap-Optware-NG.
Qnap
*New release of QLogitechMediaServer V1.05 for Qnap QTS 4.2 or higher
with x86_64 ( 15-01-2018 )
MDS5 check [ 3e7cccd81761d79d5756420cf9b7270a
LogitechMediaServer_1.05_x86_64.qpkg ]
'QLogitechMediaServer V1.05 for Qnap QTS 4.2 or higher with x86_64'
(https://goo.gl/vfpd8J) :D
earthbased wrote:
> [~] # df -h /share
> FilesystemSize Used Available Use% Mounted on
> tmpfs16.0M 12.0K 16.0M 0% /shareTry to install
> the V1. 05, it has been made to check a system on why
there is a error.
Send through tapatalk!
*
Thanks for this info, found that there is something wrong there.
Gone fix is in the officieel release !
digimaster wrote:
> Looks like it's running, could you do. /LogitehMediaServer.sh status in
> putty?
>
> Which Qnap and QTS are you using ?
>
> Send through tapatal
*
Some good news, QLogitechMediaServer is gone be include in the appstore
!
And the other things is, work on support for i686,x86.
Still in prebeta,
It would be nice to hear, if it works on which QNap nas-systems and QTS
version ?
*
*
maintainer of QLogitechMediaServer and Qnap-Optware-NG.
Nice to read, that at lat at you're end its work.:D
Its clear there where a few thing wrong, you're tar has a problem with
gzip, or there is some strong on you're directory layout !
( that why the SlimServer was not filled on installation ! ).
And you're old prefs and Cache from a SSODS/SSOTS
Why is there a error on /lib/libnsl.so.1, as the error is thats its a
ELF32 and not ELF64.
You can use ELF32 file beside other on QNAP, but PERL is a interpreter
and the file and libs it needs, have to be ELF64.
And there lays you're error, why LMS wont start, as Perl runs into
problem.
You're
jasell wrote:
> Thanks!
> Then I wait for a new qpkg.
>
>
> Sent from my iPhone using TapatalkQnap fan did a great job and made a ELF32
> Version of perl with
spotty/youtube support. So a beta is coming up. Have to find away to
make a proper install on a mixed ELF64/ELF32 Qnap nassystem.
Oke keep in mind, this is only a beta version, so can do strange things
on you're system.
But with a lot off help by Qnapfan, there now also is support for
x86/i686 Qnap systems.
It will also work for those how own a mixed x86_64 nas systems running
on QTS 4.2
Before you try it, backup you're
Qnapfan thanks for the info, and checking on it.
Looked on it this morning, and yes it comes from the LMS packets
itself.
Strangly enough i use the same perl i686 on my QNap, no trouble no
errors.
I uses the i686 perl version, because it needs less memory then the
x86_64 perl version.
The only
Oke look at the source, and the info from Qnapfan.
Also tried same stuff, and change a few things.
Please do a clean install with this beta. 'QLogitechMediaServer V1.06.d
for QNap QTS 4.2 or higher' (https://goo.gl/p6N1kJ)
If it wont start, there will be a logfile in the LogitechMediaServer
As soon as the beta is ready to release.
steklo wrote:
> That's great news! Do you have any idea when QLogitechMediaServer is
> going to appear in the appstore?
*
maintainer of QLogitechMediaServer and Qnap-Optware-NG.
Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Very strange, here it did the update.
You could try to install the beta version V1.06.d
blackbite wrote:
> Hi digimaster,
> Unfortunately still no working update function.
> logitechmediaserver-7.9.1-1516947667 is out and I'm still on 7.9.1 -
> 1516565589. Manual update sea
blackbite wrote:
> Should I install over existing 1.05a?
> Is there something special for the default download share? I didn't
> change rights there. Could the new "run as sudo" change the behavior?Sure you
> can install it as a upgrade.
Send from my mobile Phone
*
maintainer of
*
New release of QLogitechMediaServer V1.05a for Qnap QTS 4.2 or higher
with x86_64 ( 17-01-2018 )
MDS5 check [ 29ab7109e313525831de669c7c4408df
LogitechMediaServer_1.05_x86_64.qpkg ]
'QLogitechMediaServer V1.05a for Qnap QTS 4.2 or higher with x86_64'
(https://goo.gl/Phf5VY) :D
Thats strange, there is a lib file which does not has the good arch.
Could you do file /lib/libnsl.so.1 ?
If correct will point to another file, and then do file with the name of
that file.
jasell wrote:
> Still not working for me...
>
> I tried to upgrade to the new 1.05 version.
> First I
You can only copy the cache and prefs directory, when you first do
./LogitechMediaServer.sh stop.
Then copy the directory, and the ./LogitechMediaServer.sh start.
Never copy those while LMS is running, it will make it crash.
The other error has to do with you available space, know where the
earthbased wrote:
> Still waiting for QNAP tech support response but looks like I have to
> rebuild the QNAP system from scratch. File System tech is archaic.You could
> try the latest beta, in there are many changes regarding the
way it installs the first times. So maybe it will solve youre
*New release of LogitechMediaServer for Qnap x86_64 version 1.03.4.beta
( 14-01-2018 )
MDS5 check [ 8c6e559190eaa46cd353f65890ec917b
LogitechMediaServer_1.03.4beta_x86_64.qpkg ]
'QLogitechMediaServer for Qnap x86_64 version 1.03.4beta'
(https://goo.gl/93rZAQ) :D
Remember beta is for testing
dolodobendan wrote:
> The only thing I noticed was that the LMS update was categorized as an
> "error". Other than that I have no complaints! (yet [emoji14] )
>
> 24396
>
> >
Code:
> >
> [21:02:53 14-01-2018]Starting LogitechMediaServer in Background.
> [21:03:04
earthbased wrote:
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./LogitechMediaServer.sh
> start
> Slimserver.pl is missing or corrupted, check if it's present the
> SlimServer directory
>
> and /Slimserver is empty except for .INSTALLED*:
>
>
jasell wrote:
> Hi,
> I have trouble to succesfully install this.
> I download the zip-archive, unzip the files, an from QNAP I do a
> manually install browsing to "LogitechMediaServer_1.02_x86_64.qpkg" and
> then select install.
>
> During this process, which take close to a minute, I get a
A very strange problem, as with pidof it give a number.
Could you try the following [ ps | grep [L]ogitech ]
Also strange it seems the perl can run if you do perl -V.
You don't have anything else installed which is using poort 9001
What you could try is kill -9 ( and then the number which you
jasell wrote:
> I have two qnap-systems... one that is running LMS on SSOTS as I'm
> playing around with the other to get your new QLMS running...
>
> I check the /lib/ folder on the other system as well, it also have the
> same ld-2.6.1.so
>
> Both systems are updated to the latest QTS 4.2.6
jasell wrote:
> >
Code:
> >
> [~] # ps | grep [L]ogitech
> 23195 squeezeboxserver 70972 S /usr/bin/perl
/share/MD0_DATA/.qpkg/LogitechM
> [~] #
>
> >
>
> After killing the process I can't get it running again...What does perl -v
>
jasell wrote:
> perl -v does not work unless I start with setting the symlinks as you
> posted earlier.
>
> is there a way to set them to be persitent?
>
> if I do... I get...
> >
Code:
> >
> [/share/MD0_DATA/.qpkg/LogitechMediaServer/.Perl/perl/bin] # perl -v
>
Try SlimServer/SlimServer.pl.pl --user squeezeboxserver --httpport 9001.
After that pidof SlimServer.pl I think that will work,
Send from my mobile Phone
*
maintainer of QLogitechMediaServer and Qnap-Optware-NG.
Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Serval
digimaster wrote:
> Try SlimServer/SlimServer.pl.pl --user squeezeboxserver --httpport 9001.
> After that pidof SlimServer.pl I think that will work,
>
> Send from my mobile PhoneOeps only .pl
Send from my mobile Phone
*
maintainer of QLogitechMediaServer and Qnap-Optware-NG.
jasell wrote:
> >
Code:
> >
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./SlimServer/slimserver.pl
--user squeezeboxserver --httpport 9001
> Can't call method "log" on an undefined value at
1 - 100 of 710 matches
Mail list logo
