Re: [freenet-support] connection assistance
On Wednesday 30 September 2009 16:16:02 Jonathan Bannister wrote: Outstanding! I'll give it a try. The time spent illuminating the issue with such clarity is much appreciated. Any chance of an FAQ page or expand the relevant wiki page or page on the main site? Best wishes, JB - Original Message - From: Luke771 luke771.li...@gmail.com To: support@freenetproject.org Sent: Wednesday, September 30, 2009 7:39 AM Subject: Re: [freenet-support] connection assistance Jonathan Bannister wrote: Thank you. I will think about it some more. Best wishes, JB bqz69 пишет: On Monday 28 September 2009 21.54.52 VolodyA! V Anarhist wrote: Jonathan Bannister пишет: Thank you for this sugestion. I have done this repeatedly, with no success. I note the following suggestion: it would be a good idea to forward the ports 61616 and 27307 (UDP) on your router. How is this accomplished? I am using firestarter firewall, and that's where I forward my ports (I am using ubuntu linux) The port may be blocked at any level *before* the firestarter even gets a chance to see it. Think of the network connection as a water pipe, if you have several volves prior to the one at the tip of the hose closing any single one of them will block the flow of water. Router is the piece of hardware that takes the traffic it receives from one network and sends it to the different network. One of those networks can actually be seen as the cloud of the Internet (since it is connected on and on with more and more networks). At some point there is a closed port before it reaches the internet. ISPs sometimes close the ports, and if you have a router in your house, it may have come preconfigured to close everything unless told to do otherwise. I honestly do not know enough at this point to help you any more... sorry. - Volodya None of us are free until all of us are free.~ Mihail Bakunin ___ OK, here's how you forward your ports, nice and easy: First, let's identify the router The router is a piece of hardware that looks like a relatively small box, it comes in various sizes but the kind used at home is generally half the size of a laptop (a big laptop). The router has a number of ethernet ports, the cables used to connect to such ports end in RJ45 connectors that look like a bigger telephone jack. Routers often have one or two relatively short and thick antennas, sometime they only have ethernet ports. The most common home routers have 8 ports but there are much bigger ones. Your router is placed between your PC and the 'internet outlet' in the wall, in the sense that the ethernet cable (internet wire) from the back of your computer connects to the router, and the router connects to the 'internet outlet'). Find the router and note its brand and model. If you use a wireless connection, the router will only have a cable to the wall outlet and not to the PC, but it can be easily identified anyway: it's the box that must stay turned on, or your internet dies :P Physically locating your router is useful if you don't have a manual. The web interface If you happen to have a manual for your router, find out how to access the web interface. If you don't have a manual go to the manufacturer's web page (hint: www.brandname.com ), look for your model and find the information. Generally, the web interface is found at the router's IP address on port 80, that means: if your router's IP is 10.0.0.1, you will probably find the web interface pointing a web browser to http://10.0.0.1 In some cases the web interface is on a different port rather than the default http port 80. If that's the case use :port# at the end of the IP address, example http://10.0.0.1:8800 if the port is 8800. Finding out your router's IP To figure out where to point your web browser, do the follwoing: On Windows: open a cmd shell (start run (type) cmd [enter] ) and type 'ipconfig /all' (no quotes) On Linux, and other *nix (probably even Mac): open a terminal and type 'ifconfig -a' That will give you your own IP address. Your router is probably in the same range at -0 or -1, e.g. if your IP address is 10.0.0.137 your router is probably (but not always) at 10.0.0.0 or 10.0.0.1 (if this doesnt help, google probably will) Forwarding ports Web interfaces don't look all exactly the same so I can't walk you through the whole procedure, but with help of your manual or the manufacturer's website (and Google) you should be able to figure out what to do as long as you know exactly what you want to accomplpish, which in our case is: * Forward port (number/s) FROM (the router's IP) = TO (the PC's IP) for protocol UDP * ...which is pretty much all what
Re: [freenet-support] connection assistance
Jonathan Bannister wrote: Thank you. I will think about it some more. Best wishes, JB bqz69 пишет: On Monday 28 September 2009 21.54.52 VolodyA! V Anarhist wrote: Jonathan Bannister пишет: Thank you for this sugestion. I have done this repeatedly, with no success. I note the following suggestion: it would be a good idea to forward the ports 61616 and 27307 (UDP) on your router. How is this accomplished? I am using firestarter firewall, and that's where I forward my ports (I am using ubuntu linux) The port may be blocked at any level *before* the firestarter even gets a chance to see it. Think of the network connection as a water pipe, if you have several volves prior to the one at the tip of the hose closing any single one of them will block the flow of water. Router is the piece of hardware that takes the traffic it receives from one network and sends it to the different network. One of those networks can actually be seen as the cloud of the Internet (since it is connected on and on with more and more networks). At some point there is a closed port before it reaches the internet. ISPs sometimes close the ports, and if you have a router in your house, it may have come preconfigured to close everything unless told to do otherwise. I honestly do not know enough at this point to help you any more... sorry. - Volodya None of us are free until all of us are free.~ Mihail Bakunin ___ OK, here's how you forward your ports, nice and easy: First, let's identify the router The router is a piece of hardware that looks like a relatively small box, it comes in various sizes but the kind used at home is generally half the size of a laptop (a big laptop). The router has a number of ethernet ports, the cables used to connect to such ports end in RJ45 connectors that look like a bigger telephone jack. Routers often have one or two relatively short and thick antennas, sometime they only have ethernet ports. The most common home routers have 8 ports but there are much bigger ones. Your router is placed between your PC and the 'internet outlet' in the wall, in the sense that the ethernet cable (internet wire) from the back of your computer connects to the router, and the router connects to the 'internet outlet'). Find the router and note its brand and model. If you use a wireless connection, the router will only have a cable to the wall outlet and not to the PC, but it can be easily identified anyway: it's the box that must stay turned on, or your internet dies :P Physically locating your router is useful if you don't have a manual. The web interface If you happen to have a manual for your router, find out how to access the web interface. If you don't have a manual go to the manufacturer's web page (hint: www.brandname.com ), look for your model and find the information. Generally, the web interface is found at the router's IP address on port 80, that means: if your router's IP is 10.0.0.1, you will probably find the web interface pointing a web browser to http://10.0.0.1 In some cases the web interface is on a different port rather than the default http port 80. If that's the case use :port# at the end of the IP address, example http://10.0.0.1:8800 if the port is 8800. Finding out your router's IP To figure out where to point your web browser, do the follwoing: On Windows: open a cmd shell (start run (type) cmd [enter] ) and type 'ipconfig /all' (no quotes) On Linux, and other *nix (probably even Mac): open a terminal and type 'ifconfig -a' That will give you your own IP address. Your router is probably in the same range at -0 or -1, e.g. if your IP address is 10.0.0.137 your router is probably (but not always) at 10.0.0.0 or 10.0.0.1 (if this doesnt help, google probably will) Forwarding ports Web interfaces don't look all exactly the same so I can't walk you through the whole procedure, but with help of your manual or the manufacturer's website (and Google) you should be able to figure out what to do as long as you know exactly what you want to accomplpish, which in our case is: * Forward port (number/s) FROM (the router's IP) = TO (the PC's IP) for protocol UDP * ...which is pretty much all what this quick guide boils down to. The 'protocol UDP' thing means that you only need to select UDP and not TCP. Hope this helps. ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] connection assistance
Outstanding! I'll give it a try. The time spent illuminating the issue with such clarity is much appreciated. Best wishes, JB - Original Message - From: Luke771 luke771.li...@gmail.com To: support@freenetproject.org Sent: Wednesday, September 30, 2009 7:39 AM Subject: Re: [freenet-support] connection assistance Jonathan Bannister wrote: Thank you. I will think about it some more. Best wishes, JB bqz69 пишет: On Monday 28 September 2009 21.54.52 VolodyA! V Anarhist wrote: Jonathan Bannister пишет: Thank you for this sugestion. I have done this repeatedly, with no success. I note the following suggestion: it would be a good idea to forward the ports 61616 and 27307 (UDP) on your router. How is this accomplished? I am using firestarter firewall, and that's where I forward my ports (I am using ubuntu linux) The port may be blocked at any level *before* the firestarter even gets a chance to see it. Think of the network connection as a water pipe, if you have several volves prior to the one at the tip of the hose closing any single one of them will block the flow of water. Router is the piece of hardware that takes the traffic it receives from one network and sends it to the different network. One of those networks can actually be seen as the cloud of the Internet (since it is connected on and on with more and more networks). At some point there is a closed port before it reaches the internet. ISPs sometimes close the ports, and if you have a router in your house, it may have come preconfigured to close everything unless told to do otherwise. I honestly do not know enough at this point to help you any more... sorry. - Volodya None of us are free until all of us are free.~ Mihail Bakunin ___ OK, here's how you forward your ports, nice and easy: First, let's identify the router The router is a piece of hardware that looks like a relatively small box, it comes in various sizes but the kind used at home is generally half the size of a laptop (a big laptop). The router has a number of ethernet ports, the cables used to connect to such ports end in RJ45 connectors that look like a bigger telephone jack. Routers often have one or two relatively short and thick antennas, sometime they only have ethernet ports. The most common home routers have 8 ports but there are much bigger ones. Your router is placed between your PC and the 'internet outlet' in the wall, in the sense that the ethernet cable (internet wire) from the back of your computer connects to the router, and the router connects to the 'internet outlet'). Find the router and note its brand and model. If you use a wireless connection, the router will only have a cable to the wall outlet and not to the PC, but it can be easily identified anyway: it's the box that must stay turned on, or your internet dies :P Physically locating your router is useful if you don't have a manual. The web interface If you happen to have a manual for your router, find out how to access the web interface. If you don't have a manual go to the manufacturer's web page (hint: www.brandname.com ), look for your model and find the information. Generally, the web interface is found at the router's IP address on port 80, that means: if your router's IP is 10.0.0.1, you will probably find the web interface pointing a web browser to http://10.0.0.1 In some cases the web interface is on a different port rather than the default http port 80. If that's the case use :port# at the end of the IP address, example http://10.0.0.1:8800 if the port is 8800. Finding out your router's IP To figure out where to point your web browser, do the follwoing: On Windows: open a cmd shell (start run (type) cmd [enter] ) and type 'ipconfig /all' (no quotes) On Linux, and other *nix (probably even Mac): open a terminal and type 'ifconfig -a' That will give you your own IP address. Your router is probably in the same range at -0 or -1, e.g. if your IP address is 10.0.0.137 your router is probably (but not always) at 10.0.0.0 or 10.0.0.1 (if this doesnt help, google probably will) Forwarding ports Web interfaces don't look all exactly the same so I can't walk you through the whole procedure, but with help of your manual or the manufacturer's website (and Google) you should be able to figure out what to do as long as you know exactly what you want to accomplpish, which in our case is: * Forward port (number/s) FROM (the router's IP) = TO (the PC's IP) for protocol UDP * ...which is pretty much all what this quick guide boils down to. The 'protocol UDP' thing means that you only need to select UDP and not TCP. Hope this helps. ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe
Re: [freenet-support] connection assistance
Thank you. I will think about it some more. Best wishes, JB - Original Message - From: VolodyA! V Anarhist volo...@whengendarmesleeps.org To: support@freenetproject.org Sent: Monday, September 28, 2009 10:03 PM Subject: Re: [freenet-support] connection assistance bqz69 пишет: On Monday 28 September 2009 21.54.52 VolodyA! V Anarhist wrote: Jonathan Bannister пишет: Thank you for this sugestion. I have done this repeatedly, with no success. I note the following suggestion: it would be a good idea to forward the ports 61616 and 27307 (UDP) on your router. How is this accomplished? I am using firestarter firewall, and that's where I forward my ports (I am using ubuntu linux) The port may be blocked at any level *before* the firestarter even gets a chance to see it. Think of the network connection as a water pipe, if you have several volves prior to the one at the tip of the hose closing any single one of them will block the flow of water. Router is the piece of hardware that takes the traffic it receives from one network and sends it to the different network. One of those networks can actually be seen as the cloud of the Internet (since it is connected on and on with more and more networks). At some point there is a closed port before it reaches the internet. ISPs sometimes close the ports, and if you have a router in your house, it may have come preconfigured to close everything unless told to do otherwise. I honestly do not know enough at this point to help you any more... sorry. - Volodya -- http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast http://www.freedomporn.org/Freedom Porn, anarchist and activist smut None of us are free until all of us are free.~ Mihail Bakunin ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] connection assistance
Jonathan Bannister пишет: I'm having diffuclty connecting. Can you advise? I believe that if you go to http://www.whatismyip.com/ and put in that IP address that might help. - Volodya Unknown external address Freenet was unable to determine your external IP address (or the IP address of your NAT-device or firewall). You can still exchange references with other people, however this will only work if the other user is not behind a NAT-device or firewall. As soon as you have connected to one other user in this way, Freenet will be able to determine your external IP address. You can determine your current IP address and tell your node with the 'Temporary IP address hint' configuration parameter http://127.0.0.1:/config/node. Also, it would be a good idea to forward the ports 61616 and 27307 (UDP) on your router to make it easy to connect to your node. * Temporary IP address hintTemporary hint to what our IP might be; deleted after us ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe -- http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast http://www.freedomporn.org/Freedom Porn, anarchist and activist smut None of us are free until all of us are free.~ Mihail Bakunin ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] connection assistance
Thank you for this sugestion. I have done this repeatedly, with no success. I note the following suggestion: it would be a good idea to forward the ports 61616 and 27307 (UDP) on your router. How is this accomplished? - Original Message - From: VolodyA! V Anarhist volo...@whengendarmesleeps.org To: support@freenetproject.org Sent: Monday, September 28, 2009 12:42 PM Subject: Re: [freenet-support] connection assistance Jonathan Bannister пишет: I'm having diffuclty connecting. Can you advise? I believe that if you go to http://www.whatismyip.com/ and put in that IP address that might help. - Volodya Unknown external address Freenet was unable to determine your external IP address (or the IP address of your NAT-device or firewall). You can still exchange references with other people, however this will only work if the other user is not behind a NAT-device or firewall. As soon as you have connected to one other user in this way, Freenet will be able to determine your external IP address. You can determine your current IP address and tell your node with the 'Temporary IP address hint' configuration parameter http://127.0.0.1:/config/node. Also, it would be a good idea to forward the ports 61616 and 27307 (UDP) on your router to make it easy to connect to your node. * Temporary IP address hintTemporary hint to what our IP might be; deleted after us ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe -- http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast http://www.freedomporn.org/Freedom Porn, anarchist and activist smut None of us are free until all of us are free.~ Mihail Bakunin ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] connection assistance
Jonathan Bannister пишет: Thank you for this sugestion. I have done this repeatedly, with no success. I note the following suggestion: it would be a good idea to forward the ports 61616 and 27307 (UDP) on your router. How is this accomplished? That will depend on the router, and you will need to have control of it, or at least have the ability to explain to those in control why you need that port forwarded. - Volodya - Original Message - From: VolodyA! V Anarhist volo...@whengendarmesleeps.org To: support@freenetproject.org Sent: Monday, September 28, 2009 12:42 PM Subject: Re: [freenet-support] connection assistance Jonathan Bannister пишет: I'm having diffuclty connecting. Can you advise? I believe that if you go to http://www.whatismyip.com/ and put in that IP address that might help. - Volodya Unknown external address Freenet was unable to determine your external IP address (or the IP address of your NAT-device or firewall). You can still exchange references with other people, however this will only work if the other user is not behind a NAT-device or firewall. As soon as you have connected to one other user in this way, Freenet will be able to determine your external IP address. You can determine your current IP address and tell your node with the 'Temporary IP address hint' configuration parameter http://127.0.0.1:/config/node. Also, it would be a good idea to forward the ports 61616 and 27307 (UDP) on your router to make it easy to connect to your node. * Temporary IP address hintTemporary hint to what our IP might be; deleted after us ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe -- http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast http://www.freedomporn.org/Freedom Porn, anarchist and activist smut None of us are free until all of us are free.~ Mihail Bakunin ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe -- http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast http://www.freedomporn.org/Freedom Porn, anarchist and activist smut None of us are free until all of us are free.~ Mihail Bakunin ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] connection assistance
On Monday 28 September 2009 21.54.52 VolodyA! V Anarhist wrote: Jonathan Bannister пишет: Thank you for this sugestion. I have done this repeatedly, with no success. I note the following suggestion: it would be a good idea to forward the ports 61616 and 27307 (UDP) on your router. How is this accomplished? I am using firestarter firewall, and that's where I forward my ports (I am using ubuntu linux) ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] connection assistance
bqz69 пишет: On Monday 28 September 2009 21.54.52 VolodyA! V Anarhist wrote: Jonathan Bannister пишет: Thank you for this sugestion. I have done this repeatedly, with no success. I note the following suggestion: it would be a good idea to forward the ports 61616 and 27307 (UDP) on your router. How is this accomplished? I am using firestarter firewall, and that's where I forward my ports (I am using ubuntu linux) The port may be blocked at any level *before* the firestarter even gets a chance to see it. Think of the network connection as a water pipe, if you have several volves prior to the one at the tip of the hose closing any single one of them will block the flow of water. Router is the piece of hardware that takes the traffic it receives from one network and sends it to the different network. One of those networks can actually be seen as the cloud of the Internet (since it is connected on and on with more and more networks). At some point there is a closed port before it reaches the internet. ISPs sometimes close the ports, and if you have a router in your house, it may have come preconfigured to close everything unless told to do otherwise. I honestly do not know enough at this point to help you any more... sorry. - Volodya -- http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast http://www.freedomporn.org/Freedom Porn, anarchist and activist smut None of us are free until all of us are free.~ Mihail Bakunin ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe