for each.
best,
mike--
On Sat, 02 Jul 2011 17:36:39 +0200, Peter van der Leek wrote:
What is the average time for the carp failover to kick in... i.e.
how
much time does it take for the backup to become master and start
serving requests and vice versa? Is the timing parameter
configurable?
I
installers in 2.0). The only issues I've hit at all are related to the
crappy Samba implementation in 10.6 and below. The test 10.7 machines are a
dream.
The users love how transparent and easy the VPN is.
Mike McLaughlin
On Mon, Apr 11, 2011 at 8:19 AM, Paul Mather p...@gromit.dlib.vt.eduwrote
Typically when I experience a slow web interface it is caused by DNS
timeouts. Check your local settings and your pfSense box's DNS.
Mike McLaughlin - System Administrator
Clientworks, Inc - 721 Zion St, Nevada City, CA 95959
Office 530-470-0104 - Cell 530-559-9606
On Tue, Feb 22, 2011 at 12:47
The proper way to handle that many clients is to run a WSUS update server
(or its new replacement, System Center).
Mike McLaughlin - System Administrator
Clientworks, Inc - 721 Zion St, Nevada City, CA 95959
Office 530-470-0104 - Cell 530-559-9606
On Thu, Feb 17, 2011 at 7:52 PM, Shali K.R. sh
Ah, sorry. I don't have a great recommendation for you then. I've not used a
WSUS server without a domain.
You can tune squid to cache larger files, but I too am not extremely fond of
Squid. I always have random issues with this and that running it (mainly
custom web apps, java, etc).
Mike
Any update
-- Forwarded message --
From: joseph malai malai.jos...@gmail.com
Date: Wed, Jan 26, 2011 at 1:34 PM
Subject: Fwd: how to add vlan on pfsense FreeBSD 6.2-RELEASE-p11 i386
To: support-h...@pfsense.com
-- Forwarded message --
From: joseph
of the lists. Removig the offending lists
from /usr/local/etc/squidGuard/blacklist.files takes care of the error
until the lists are updated.
Can anyone point me to the script that is generating the blacklists.file
so that I can try and figure out what is going wrong.
Thanks
Mike
WAN ports. The load balancer will constantly ping WAN1, WAN2,WAN3,
WAN4 WAN5 simultaneously. Depending on which has the quickest response and
is not currently transmitting packets, it will utilise. Then why set the
unique IP addresses ?
Best regards,
Mike
Mike Lever
came up last will set the route to your monitor IP through
it.
So then, say WAN2 was the last WAN port to come up and the monitor addresses
were set to the same IP address, would it then only route traffic through
WAN2 ?
Best regards,
Mike
Mike Lever
Great, thank you very much Bill.
One point for clarification purposes... please define a flow ?
Best regards,
Mike
Mike Lever
+27 82 903 8613 - Mobile
+27 11 807 0100 - Telephone
+27 11 807
.
Any help would greatly be appreciated !
Mike Lever
Tenacity Films (Pty) Ltd
t/a Velocity Films
(t) +2711-807-0100
(f) +2711-807-1208
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
?
Regards,
Mike Lever
Tenacity Films (Pty) Ltd t/a
Velocity Films
(T) +2711-807-0100
(F) 086-681-7518
http://www.velocityfilms.com
CONFIDENTIALITY CAUTION: If you have received this communication in error,
please note that it is intended for the addressee only, is privileged and
confidential
PPPoE dialup in pfsense
for every WAN/OPT card as opposed to only the primary WAN ?
Does anybody else have a simila situation ? Any ideas / suggestions how I can
streamline this process ?
Mike Lever
Tenacity Films (Pty) Ltd
t/a Velocity Films
(t) +2711-807-0100
(f) +2711-807-1208
Firstly, on what basis does failover work ? when is it activated ? Is it
possible to set the conditions on which it switch over ?
I would like to set it that should throughput drop below a certain speed for x
seconds it will failover.
Mike Lever
Tenacity Films (Pty) Ltd
t/a Velocity Films
.
Can anybody suggest the best way to incorporate this as a WAN port in
Pfsense ?
I currently have it running through an old laptop using XP ICS ( Internet
Connection sharing), seems to be doing an okay job but wandering if there
are any better alternatives out there ?
Regards,
Mike Lever
traffic to the squid box / gateway and then load balance the squid
boxs traffic out ?
The Pfsense box IP = 10.0.0.3
Squid IP = 10.0.0.197
Regards,
Mike Lever
Tenacity Films (Pty) Ltd t/a
Velocity Films
(T) +2711-807-0100
(F) 086-681-7518
http://www.velocityfilms.com
CONFIDENTIALITY
Hi Dean ,
Thanks for the feedback, so are you suggesting I only use 1 NIC for the
squid box ? as opposed to 2, 1 coming IN from the Pfsense / internal network
and 1 going BACK to the Pfsense.
Regards,
Mike Lever
Tenacity Films (Pty) Ltd t/a
Velocity Films
(T) +2711-807-0100
(F) 086-681
Done that, but where I was battling was setting IP addresses on the pfsense
interface (the squid is static) what do I set as the ip address and gateway ?
Also how do I configure the firewall rules ?
Any ideas there ?
Mike Lever
Tenacity Films (Pty) Ltd
t/a Velocity Films
(t) +2711-807-0100
Thaks David ! Bear in mind that I am using it as a transparent proxy. Surely I
must set some rules on the firewall to route all http traffic to the squid box
and back to the pfsense box ?
Mike Lever
Tenacity Films (Pty) Ltd
t/a Velocity Films
(t) +2711-807-0100
(f) +2711-807-1208
* * * * * *
Only problem with this is then I lose out on my load balancing rule.
Regards,
Mike Lever
Tenacity Films (Pty) Ltd t/a
Velocity Films
(T) +2711-807-0100
(F) 086-681-7518
http://www.velocityfilms.com
CONFIDENTIALITY CAUTION: If you have
Hi Curtis,
Thanks for the advise, I will give wireshark a bash, just not sue how to
find where things are going wrong with MSN ? I dont see any errors in the
log either I just see sessions going through their normal process.
I seemed to make some changes today and it works.
Regards,
Mike
like to direct it through one of them.
Regards,
Mike Lever
Tenacity Films (Pty) Ltd t/a
Velocity Films
(T) +2711-807-0100
(F) 086-681-7518
http://www.velocityfilms.com
CONFIDENTIALITY CAUTION: If you have received this communication in error,
please note that it is intended
to monitor total amount of Gb's
uploaded and downloaded and then disconnect once reached the limit ?
Any help or ideas would greatly be appreciated !
Mike Lever
Tenacity Films (Pty) Ltd
t/a Velocity Films
(t) +2711-807-0100
(f) +2711-807-1208
No such luck with these cards in that board, tried RC2, 3 4 to no avail
Working fine off a P4 box as a temporary measure. I will be getting 1 x
Intel quad card and 1 x dual card and hopefully that will do the trick.
Will keep you posted
Regards,
Mike Lever
Tenacity Films (Pty) Ltd t
Barracuda SATA300 8MB 7200RPM Hard Drive w/NCQ
2 x Sony 52x CD-ROM Drive - OEM - Black
1 x Kingston DDR2-1066 1GB HyperX Memory Module
What can I check / do ?
Regards,
Mike Lever
Tenacity Films (Pty) Ltd t/a
Velocity Films
(T) +2711-807-0100
(F) 086-681-7518
http://www.velocityfilms.com
The last line before the error is:
ste0: Dlink DL10050 10/100BaseTX) port 0.2100-021ff irq 11 at device 4.0 on
pci3
Regards,
Mike Lever
Tenacity Films (Pty) Ltd t/a
Velocity Films
(T) +2711-807-0100
(F) 086-681-7518
http://www.velocityfilms.com
CONFIDENTIALITY CAUTION: If you have
Done ! removed them and it works fine. I put the 2 x Dlinks into an old P4
its boots up fine !
So then the problem is the board ? processor ?
Can you suggest a board that you know for certain works with either the
dlinks or Intel 4 port cards ?
Regards,
Mike Lever
Tenacity Films (Pty
Thanks Sean for the clarification.
One point of clarification.. can you please define exactly what a 'state' is
?
Regards,
Mike Lever
Tenacity Films (Pty) Ltd t/a
Velocity Films
(T) +2711-807-0100
(F) 086-681-7518
mailto:[EMAIL PROTECTED]
http
image002.jpg
but it doesnt seem to be load balancing
correctly.
Regards,
Mike Lever
Tenacity Films (Pty) Ltd t/a
Velocity Films
(T) +2711-807-0100
(F) 086-681-7518
http://www.velocityfilms.com
CONFIDENTIALITY CAUTION: If you have received this communication in error,
please note that it is intended
in bootup.
What did I do wrong and what can I do to correct it ? using the
Regards,
Mike Lever
Tenacity Films (Pty) Ltd t/a
Velocity Films
(T) +2711-807-0100
(F) 086-681-7518
http://www.velocityfilms.com
CONFIDENTIALITY CAUTION: If you have received this communication in error,
please note
Looking at my system log I see repeated messages dhclient[12649]:
DHCPDISCOVER on rl0 to 255.255.255.255 port 67 interval 13
Now rl0 is statically configured and should be needing any form of DHCP,
where is this coming from ? and how do I stop it ?
Regards,
Mike Lever
Tenacity Films (Pty
the interface status is shows
the shared one.
Regards,
Mike Lever
Tenacity Films (Pty) Ltd t/a
Velocity Films
(T) +2711-807-0100
(F) 086-681-7518
http://www.velocityfilms.com
CONFIDENTIALITY CAUTION: If you have received this communication in error,
please note that it is intended
connection.
Lastly what is the difference between setting up firewall rules under the
LAN tab vs the WAN tab ?
Regards,
Mike Lever
Tenacity Films (Pty) Ltd t/a
Velocity Films
(T) +2711-807-0100
(F) 086-681-7518
http://www.velocityfilms.com
CONFIDENTIALITY CAUTION: If you have received
of the onboard video support.
Thanks
Mike
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
-
To unsubscribe, e-mail: [EMAIL
I've had pretty decent with these boards under linux, but pfsense is my first
foray into freebsd territory. Pfsense supports a ton of ethernet interfaces,
and I was just surprised this didn't work.
Thanks,
Mike
- Original Message
From: Joel Robison [EMAIL PROTECTED]
To: support
BTW, it looks like this driver is part of freebsd 7, so it will get fully
supported some time in the future. It would just be nice sooner rather than
later... :-)
thx
mike
- Original Message
From: Joel Robison [EMAIL PROTECTED]
To: support@pfsense.com
Sent: Saturday, November 10
gateway. After you have
made the changes in your 2wire, you will need to reboot the pfsense box.
Mike
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
.
Mike
Fuchs, Martin wrote:
The general problem is not solved until now - encrypted tunnels cannot be
shaped...
There's the possibility to shape a whole OpenVPN tunnel (clientside) for
outgoing traffic, but I believe this is not what wou really want...
What you are planning is some sort
and
no shaping option either. Also re-ran the shaping wizard and no
OpenVPN option. Thanks again for your help, it's much appreciated.
Mike
**
Fuchs, Martin wrote:
!-- /* Font Definitions */ @font-face {font-family:Cambria Math;
panose-1:2 4 5 3 5 4 6 3 2 4;} @font-face {font-family:Calibri;
panose-1:2 15
Oh. I though you meant the client side. I'll upgrade our main pfSense
box (server-side) and try again. Thanks and have a great weekend.
Mike
Scott Ullrich wrote:
The option resides in the OpenVPN server configuration screen.
Scott
On 5/18/07, Mike Lee [EMAIL PROTECTED] wrote:
I've
Sorry guys, but when I looked at the OpenVPN server options on one of
our OpenVPN boxes running the 5/14 snapshot, I don't see any options for
shaping the tunnel. Below are the options I have:
Disable this tunnel
Protocol
Dynamic IP
Local port
Address pool
Use static IPs
Local network
Remote
Ok. I'll just hold tight for now. Do you know if this functionality
will make it into the final 1.2 release or will it be in future point
(1.3, etc.) releases? Thanks.
Mike
Fuchs, Martin wrote:
Shaping only works from client side at the moment...
I'm looking how to shape from server side
in advance.
Mike Lee
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
config
data? Thanks.
Mike
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
.
Thanks in advance.
Mike Lee
Are you talking about this page?
http://faq.pfsense.com/index.php?action=artikelcat=10id=38artlang=enhighlight=hidden
When I click on the link to the config.xml file, it doesn't work, and there are
no DHCP options listed on that page.
Thanks,
mike
- Original Message
From: Fuchs
options?
Thanks,
mike
- Original Message
From: Scott Ullrich [EMAIL PROTECTED]
To: support@pfsense.com
Sent: Saturday, January 20, 2007 10:26:04 AM
Subject: Re: AW: [pfSense Support] TFTP and NTP server options in DHCP
Sure there are DHCP options listed on that page:
dhcpd/(if)/next
Thanks. This link makes it look like only the specific tftp-server option was
committed to the CVS, and not the more generic one that enables me to set other
options like time server as well. Is that correct? Is there a way to set a
time-server option as well?
Thanks,
Mike
- Original
start
pulling her hair out of her head.
Thanks in Advance,
Mike
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Thanks for the fast response Scott. I will give that a try right now.
Mike
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 27, 2005 6:08 PM
To: support@pfsense.com
Subject: Re: [pfSense Support] CDROM Version Install
Try a different CD-ROM
51 matches
Mail list logo
