Marc Gemis schreef op 12/11/2014 om 5:34:
On Tue, Nov 11, 2014 at 8:36 PM, André Pirard a.pirard.pa...@gmail.com
mailto:a.pirard.pa...@gmail.com wrote:
e) the word fuzzy is removed from OSM, at least for routing, that is.
Could you be less fuzzy ? :-) and please list the actions one
On Wed, Nov 12, 2014 at 10:21 AM, Jakka vdmfrank...@gmail.com wrote:
Very interesting.
Something that seems easy and used from the early days of OSM is sensitive
for personal interpret.
Good link:
http://wiki.openstreetmap.org/wiki/Bicycle#Cycle_lanes_in_
oneway_motor_car_roads
image with
What are you doing about the stop positions? I noticed that the position
from De Lijn is often much worse than the position in OSM.
Regards,
Sander
2014-11-12 21:18 GMT+01:00 Jo winfi...@gmail.com:
Hi,
After a few years of tagging bus stops around Belgium, I noticed we've
been doing it
I improve(d) the positions of the bus stops where possible. Not everything
can be determined from aerial imagery though (the letters B U S and the
shelters), so survey by all of us remains necessary and important.
Jo
2014-11-12 21:41 GMT+01:00 Sander Deryckere sander...@gmail.com:
What are you
On Tue, Nov 11, 2014 at 5:41 PM, Randy Meech randy.me...@gmail.com wrote:
It's that the US org has a demonstrated track
record of running large conferences very well, and it seemed like a better
partner for this.
I'm sure other countries can organize large conferences as well. The
location
On 12/11/2014 03:13, Oleksiy Muzalyev wrote:
They are technically extraterritorial through a treaty agreement
with the U.S. government (1).
Good luck getting there without a US visa though!
Cheers,
Andy
___
talk mailing list
I meant that the UN General Assembly Hall is an appropriate venue for a
combined Stated of the Map (EU, US, World, etc.). There was such a
suggestion.
It would be a challenge to fill up this hall with the capacity of 1800+
in any case. If it is a large combined event, it could generate
On Mon, Nov 10, 2014 at 2:04 PM, Michael Kugelmann michaelk_...@gmx.de wrote:
Hello,
as I didn't read anything about it: was there an announcement about the
location for the 2015 SOTM at the 2014 SOTM Buenos Aires?
IIRC there was a statement about the intention to announce the 2015
locataion
On Wed, Nov 12, 2014 at 7:55 AM, Oleksiy Muzalyev
oleksiy.muzal...@bluewin.ch wrote:
It would be a challenge to fill up this hall with the capacity of 1800+
in any case. If it is a large combined event, it could generate positive
international publicity for the project.
Our proposal said
Hello there,
At the beginning that this discussion, I guessed it could turn sour
rather quickly.
Let's just say that, as a mere contributor, I would just not understand
if NYC were attributed the SOTM 2015 whithout having submitting an
official request that would be considered on the same
On Wed, Nov 12, 2014 at 12:04 AM, Michael Kugelmann michaelk_...@gmx.de
wrote:
I personally have a somehow different opinion: 2014 was in (South)
America, so why host the next SOTM again relativeley close to there (from
the viewpoint of an European)? OK, the UN is prestigious location for such
Hi JB, all,
2014-11-12 16:02 GMT+01:00 JB jb...@mailoo.org:
Hello there,
At the beginning that this discussion, I guessed it could turn sour rather
quickly.
Let's just say that, as a mere contributor, I would just not understand if
NYC were attributed the SOTM 2015 whithout having
On 12.11.2014 17:52, Eugene Alvin Villar wrote:
On Wed, Nov 12, 2014 at 12:04 AM, Michael Kugelmann
michaelk_...@gmx.de mailto:michaelk_...@gmx.de wrote:
But I would prefer more to have the SOTM circulating the globe...
So I wouldn't say that having SotM be in New York after Buenos Aires
Hi Pieren, Randy, all,
2014-11-12 11:14 GMT+01:00 Pieren pier...@gmail.com:
On Tue, Nov 11, 2014 at 5:41 PM, Randy Meech randy.me...@gmail.com
wrote:
It's that the US org has a demonstrated track
record of running large conferences very well, and it seemed like a
better
partner for
To compare an alternative:
A live service could look up the relationship in real time as a person
clicked.
Meaning you could make a map with the wikidata feature, without adding
anything to OSM.
Is simply using OSM as a cache for the output of a script that can be run
later?
Ciao a tutti,
scusate il cross-posting . inoltro questa mail per chi non ne fosse a
conoscenza.
Potrebbe essere un'occasione per richiedere la pubblicazione di temi di
interesse per OSM e il Contest ...
Ciao
Cesare
Cesare Gerbino
http://cesaregerbino.wordpress.com/
Dovrei riuscire a venire.
Mi iscrivo nei giorni prossimi.
Il 11/12/2014 09:17 AM, cesare gerbino ha scritto:
Ciao a tutti,
scusate il cross-posting . inoltro questa mail per chi non ne
fosse a conoscenza.
Potrebbe essere un'occasione per richiedere la pubblicazione di temi
di
On 2014-11-10 10:23, Volker Schmidt wrote:
Qualcuno può darmi consigli come registrare messaggi audio
georeferenziati per uso in JOSM.
buongiorno,
vorrei spostare l'interessante discussione seguita a questa
richiesta (anche) in un'altra direzione. Anch'io voglio fare
la STESSA identica cosa
Che differenza c'è tra barrier=entrance ed entrance=yes ?
Nel mio caso devo aggiungere le porte di un edificio pubblico
http://wiki.openstreetmap.org/wiki/Tag:barrier%3Dentrance
http://wiki.openstreetmap.org/wiki/Key:entrance
___
Talk-it mailing list
Il 12/11/2014 11:19, M. Fioretti ha scritto:
...
avere un micro-registratore separato, che consumi molto meno,
sia molto più piccolo, ...
La soluzione esiste ed è molto semplice!
Ingredienti:
- un GPS o un datalogger
- un registratore audio
- l'uso dell'editor Josm col plugin audio
Io nelle
Ciao, nelle precedenti versioni di Josm riuscivo ad avere dei bei nodi, in
corrispondenza delle giunzioni delle vie con dei bei quadrati grandi che mi
facevano cogliere subito se le vie erano intersecate con giunzione o meno
però ora non riesco più a configurare la visualizzazione in modo
Ciao a tutti,
sto provando ad estrarre dati da un file osm utilizzando osmfilter.
Vorrei ottenere le capitali dell'europa, ho eseguito questo comando
osmfilter europe-latest.o5m --keep-nodes=capital=yes and
admin_level=2 -o=europe_capital.osm
ma mi ha creato un file osm da più di 200GB.
Devo
On 2014-11-12 11:46, Alessandro wrote:
Il 12/11/2014 11:19, M. Fioretti ha scritto:
...
avere un micro-registratore separato, che consumi molto meno,
sia molto più piccolo, ...
La soluzione esiste ed è molto semplice!
certo che esiste, lo sapevo già. Ma non è certo ottimale, non nel senso
mi piace molto la loro soluzione... continuo a non capire perché non
espongano le voci di wikipedia ;-)
Il giorno 11 novembre 2014 12:13, Simone Cortesi sim...@cortesi.com ha
scritto:
2014-11-11 12:01 GMT+01:00 Martin Koppenhoefer dieterdre...@gmail.com:
2014-11-11 11:09 GMT+01:00 Simone
Il 12/11/2014 12:58, M. Fioretti ha scritto:
certo che esiste, lo sapevo già. Ma non è certo ottimale, non nel senso
che serve a me almeno: se avessi GIA' un datalogger e/o un
miniregistratore avrebbe senso, ma dovendo comprare tutto da zero
vorrei un solo oggetto
Anch'io 3 mesi fa ero alla
Il 12/11/2014 12:45, Luca Delucchi ha scritto:
Ciao a tutti,
sto provando ad estrarre dati da un file osm utilizzando osmfilter.
Vorrei ottenere le capitali dell'europa, ho eseguito questo comando
osmfilter europe-latest.o5m --keep-nodes=capital=yes and
admin_level=2 -o=europe_capital.osm
ma
Come scritto nel wiki barrier=entrance è solo un buco in una
recinzione (in particolare non è un cancello, non è una porta, ecc...)
Il tag entrance=* invece indica il punto di ingresso (tipicamente in
un edificio, tipicamente chiuso da una porta).
Nel caso classico dell'ingresso di un edificio
Bella esecution.
Sono diretti concorrenti di ma2app che peró usa le mappe della concorrenza.
B.
___
Talk-it mailing list
Talk-it@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-it
-Original Message-
From: mircozorzo [mailto:mircozo...@inwind.it]
Sent: mercoledì 12 novembre 2014 11:59
To: talk-it@openstreetmap.org
Subject: [Talk-it] Josm e nodi collegati
Ciao, nelle precedenti versioni di Josm riuscivo ad avere dei bei nodi, in
corrispondenza delle giunzioni delle
2014-11-12 14:12 GMT+01:00 Alessandro ale_z...@libero.it:
Ciao Luca!
Magari lo fa di default, ma hai provato a droppare le eventuali relations
che si portano dietro le capitali?
Prova ad aggiungere --drop-ways --drop-relations e male non gli fai
+1, ci sono 29 relazioni con capital=yes,
Ciao
Il giorno 12 novembre 2014 12:45, Luca Delucchi lucadel...@gmail.com ha
scritto:
sto provando ad estrarre dati da un file osm utilizzando osmfilter.
Vorrei ottenere le capitali dell'europa, ho eseguito questo comando
osmfilter europe-latest.o5m --keep-nodes=capital=yes and
Grazie della risposta, era quello che cercavo.
Ora va meglio però vorrei i nodi connessi più grandi e mi ricordo che
cambiando, mi sembra, questo parametro
mappaint.node.connection-size 20
funzionava, un tempo.
Adesso sono vecchio e o non mi accorgo che la dimensione aumenta oppure
anche se
Ho capito ho fatto delle prove: il problema è nello stile, cambiando stile
(non MapCss quello predefinito) ma Illuminazione o Segnaletica limiti di
velocità il parametro della dimensione dei nodi connessi funziona come mi
aspetto.
Domanda: posso modificare lo stile in modo che funzioni anche con
On 12 November 2014 11:18, Brian Prangle bpran...@gmail.com wrote:
Could I have:
20/25 SE NE and SW
http://mapwarper.net/maps?field=titlequery=IRL-GSGS-3906-20-25show_warped=0
23/27 NE and SE
http://mapwarper.net/maps?field=titlequery=IRL-GSGS-3906-23-27show_warped=0
Hmm - I cant seem
Olá,
O Tasking Manager chegou a 100%, parabéns aos envolvidos!
Adicionei um diff para a tradução do Taginfo, já que não existe um
indicador direto do percentual de tradução, como informou o John.
O iD deve estar com bastante coisas novas, pois sua tradução baixou um 15%.
Adicionei a tradução
Dia desses eu tinha lido: agora tem Camada de Fotos (Mapillary).
2014-11-12 16:24 GMT-03:00 John Packer john.pack...@gmail.com:
Parece que eles estão incluindo no editor iD uma funcionalidade de filtros
para não mostrar dados que não são relevantes para o editor.
Engraçado que ontem mesmo eu
Hallo Georg,
danke für den privaten Mailwechsel. Ich bin inzwischen auch an der
gleichen Stelle gelandet.
... denn von dem Network-Vorschlag halte ich persönlich für nicht optimal
(Änderung eines Verwendungszweckes eines Tag's, müsste auch erst ausführlich
diskutiert werden).
Es mag
On 12.11.2014 00:00, Peter Barth wrote:
Außerdem wäre allgemein noch ein Feed für Changesetkommentare in meiner
Umgebung interessant. Ich will mich ja nicht für jeden Changeset in
meiner Umgebung extra subscriben ;)
Ich wollte jetzt grade
http://zverik.osm.rambler.ru/whodidit/
vorschlagen
Peter Barth wrote on 12.11.2014 00:00:
Frederik Ramm schrieb:
Das ganze ist das Resultat eines Google Summer of Code-Projekts und
wurde von Lukasz Gurdek, einem Studenten aus Polen, implementiert.
Mentor in dem Projekt war Serge Wroclawski.
Eine Kleinigkeit gibts aber, die ich derzeit doof
Am 11. November 2014 16:06 schrieb Andreas Neumann andr-neum...@gmx.net:
Nun ist ebusiness als Wert beim Office-Tag eingefügt worden.
tags bitte auf Englisch und ohne Abkürzungen, m.E. electronic_business
oder evtl. e_business oder e-business
Gruß,
Martin
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 12.11.2014 um 01:54 schrieb Stephan Knauss:
Ich habe nicht recherchiert wer dieser Andreas eigentlich ist, aber
der Kommentar einen Tag zu löschen falls er nicht binnen Frist im
Wiki dokumentiert (und vorher abgestimmt ist) zeigt doch ein
Hola David.
No sé si sigues trabajando en el tema de los portales de Madrid. Si es así
yo te ofrezco mi web personal para alojar el fichero. Además, aunque se me
acumulan las cosas voy intentar echar un ojo a los script que creaste.
El 16 de junio de 2014, 22:43, David Marín Carreño
Hola.
Hice alguna importación como prueba de concepto por la zona de Hortaleza,
pero poco más.
El script ahí está, para quien lo quiera usar. Si te hace falta algo, no
dudes en comentarme.
El Wed Nov 12 2014 at 15:37:37, Almorca (almo...@gmail.com) escribió:
Hola David.
No sé si sigues
2014-11-12 10:38 GMT+01:00 Luca Delucchi lucadel...@gmail.com:
questa sera dovrei riuscire a liberarmi per le 22:30 o forse un po' prima.
Farò comunque un salto all'Uva Menta Café per vedere se qualcuno è ancora
lì.
secondo me trovi qualcuno, più che altro dovremo prenotare. ci può
pensare
Sent: Wednesday, November 12, 2014 at 10:41 AM
From: Simone Cortesi sim...@cortesi.com
E' la versione birreria dell'uvamenta, non penso si possa prenotare.
L'ho già vista prenotata per altri «gruppi».
Più tardi provo a dare un pronto. Vi tengo aggiornati.
--
Matteo Quatrida
GNU/Linux User
Sent: Wednesday, November 12, 2014 at 10:45 AM
From: Luca Delucchi lucadel...@gmail.com
Ah ok, avevo perso Cafè, però ci fanno mangiare perchè se no dopo un
po' potrei mangiarmi qualcuno di voi :-)
Assieme alle ottime birre, portano sempre da sgranocchiare.
Mal che vada, basta prendere
2014-11-12 14:10 GMT+01:00 Matteo Quatrida matteo.quatr...@linuxmail.org:
Okay. Ho prenotato alle 20:30 all'Uva Menta Cafè per 8 persone.
Preparano i tavoli. Ho detto loro che un paio di persone potrebbero anche
mangiare un pasto.
*Il tavolo è riservato a nome OSM*.
grazie.
A più tardi.
Un grazie ancora a Matteo per aver promosso l'incontro di ieri sera.
A breve spero di darvi qualche dettaglio in più in merito al progetto
M(')appare Il Lagorai - Cima d'asta.
Un ciao a tutti
Giorgio
Messaggio originale
Da: matteo.quatr...@linuxmail.org
Data: 12-nov-2014 10.51
A:
Well, as far as I know, NRCan have no more projects around OSM community since
fall 2012 - no more Canvec in .osm format, no more participation to the talk-ca
list. Governmental priorities change and they could eventually get back to the
community but, for the moment, I am even surprised the
Ahoj, znova připomínám, že v RÚIANu jsou i budovy, kde byla vedena účelová
katastrální mapa, seznam těchto míst vedených již v RÚIANu je zde:
http://www.cuzk.cz/Uvod/Produkty-a-sluzby/RUIAN/2-Poskytovani-udaju-RUIAN-
ISUI-VDP/Informace-o-uzemni-identifikaci-%281%29/Katastralni-uzemi-s-OMP-V.
Cau,
jak postupovat, pokud v RUIAN jsou spatne udaje? Napriklad:
Kromeriz - Hanacky namesti, jedna budova je zborena...
https://www.openstreetmap.org/#map=18/49.29289/17.39111layers=N
Zbylo jen cislo popisne. Smazat cp? Nejaka moznost, jak opravit i na
http://ruian.poloha.net/ , aby ostatni
Ahoj,
tohle je problém, no. V RUIAN je právní stav, nikoli realita.
Pokud majitel ohlásí zbourání budovy, měla by z RUIAN zmizet i s adresou.
Pokud to nenahlásí, tak je to blbé.
Mohl bych skladovat seznam zbořených či z jiného důvodu neplatných budov a ty
by se pak nevykreslovaly ani
Ahoj,
jak jsem sliboval nové fíčury, tak se to trochu protahuje, protože jsem
nezprovoznil Mapnik3 ke své spokojenosti a tak zůstávám u Mapniku2, což
znamená větší pracnost, ale jde to.
Další vrstvička se jmenuje landuse a je to to, s čím jsem už před měsíci
experimentoval. Podařilo se
Ahoj,
-- Původní zpráva --
Od: Petr Vejsada o...@propsychology.cz
Komu: OpenStreetMap Czech Republic talk-cz@openstreetmap.org
Datum: 12. 11. 2014 23:40:54
Předmět: Re: [Talk-cz] Nová fíčura - kde chybí natrasovat budovy
Ahoj,
tohle je problém, no. V RUIAN je právní stav, nikoli
Tak jeste by se to dalo resit, ze si udelas vlastni login pro par lidi co
na tom delaji (nebo overeni proti google nebo openID). Treba kdyz se
podivam na Kromeriz, tak je tam toho hodne nedodelaneho. Kdyz jsem par
veci zkoumal, tak jsem zjistil, ze je to v poradku.
Takto si k tomu sedne bohuzel
Nedal by se na autentizaci proti OSM serveru použít OAuth?
http://wiki.openstreetmap.org/wiki/OAuth
Sice to není přímo identity provider, ale na ověření, zda má uživatel
platný OSM login by to IMHO stačilo.
TT
On Wed Nov 12 2014 at 23:40:55 Petr Vejsada o...@propsychology.cz wrote:
Ahoj,
Le 7 novembre 2014 14:13, Romain MEHUT romain.me...@gmail.com a écrit :
C'est aussi un problème d'OSM de parfois montrer des itinéraires qui ne
sont en fait que la re-copie de ceux publiés dans des guides officiels...
et qui sur le terrain se révèlent impraticables. Pour mémoire, il y a eu
Bonjour
De: Stéphane Péneau stephane.pen...@wanadoo.fr
Est-ce qu'il y a eu un souci avec les scripts BANO cette nuit ?
Le 44 vient de perdre environ 200 voies rapprochées, et à priori ce
n'est pas le seul département dans cette situation, le rapprochement
étant passé de 11.15 à 11.14
De: Stéphane Péneau stephane.pen...@wanadoo.fr
Je tombe sur un cas un peu bizarre :
Ce n'est pas rare que la couche BANO affiche une rue non rapprochée,
sans code Fantoir, mais qu'on le retrouve en passant par
cadastre.openstreetmap.fr/fantoir.
Sur Crossac (44), je vois une rue nommée
Oui oui, j'ai bien compris, et j'ai fait le découpage de la rue, mais
pourquoi est-ce que RTE DE PONTCHATEAU-PLANCHE MAR (440500139R) est
listée dans les voies sans adresses alors que le rendu affiche des
numéros :
Le 12 nov. 2014 à 10:04, Romain MEHUT romain.me...@gmail.com a écrit :
Au passage, à lire les commentaires suivants sur
http://isabelleetlevelo.20minutes-blogs.fr/archive/2014/11/01/de-flers-au-mont-saint-michel-et-retour-907934.html
Le 12 novembre 2014 11:08, Yves Pratter yves.prat...@gmail.com a écrit :
*« Alors, comment cartographier cet itinéraire cyclable 7 ? Je sais que
l'itinéraire présent dans OSM est faux, vu son tracé au départ qui ne rime
à rien quand on est sur place. Mais comment corriger ? D'une part ce
Salut Vincent,
Le mercredi 12 novembre 2014 10:38:24, Vincent de Château-Thierry a
écrit :
J'ai opéré une modification hier soir en effet [1], dans le but de tenir compte
des noms de voies suffixés par un terme (souvent un nom de lieu-dit, mais pas
toujours). Sur mes communes de test, dont
Romain
Déjà fait mais plus globalement il faudrait davantage de cyclistes de terrain
qui s'approprient la contribution à OSM…
C’est ce qu’il mentionne effectivement sur une de ses pages :-)
Ce que j’ai pu voir sur son site, c’est qu’il a utilisé JOSM (l’informatique ne
doit pas être un pb
Le 12 novembre 2014 11:19, Yves Pratter yves.prat...@gmail.com a écrit :
Romain
Déjà fait mais plus globalement il faudrait davantage de cyclistes de
terrain qui s'approprient la contribution à OSM…
C’est ce qu’il mentionne effectivement sur une de ses pages :-)
Ce que j’ai pu voir sur
Question de débutant : où trouve-t-on les itinéraires tracés dans OSM?
--
View this message in context:
http://gis.19327.n5.nabble.com/Outil-libre-pour-creer-et-inserer-carte-avec-parcours-POI-tp5823365p5824080.html
Sent from the France mailing list archive at Nabble.com.
Le 12 nov. 2014 à 12:30, Shohreh codecompl...@free.fr a écrit :
Question de débutant : où trouve-t-on les itinéraires tracés dans OSM?
En tant que cartographieur :
C’est une relation de type route ou superordre.
Tu peux la voir avec ton éditeur favori (Id, JOSM…) avec une requête overpass
ou
De: Stéphane Péneau stephane.pen...@wanadoo.fr
A priori ça pose un problème à certains endroits, et c'est flagrant à
Pornic. De nombreuses voies avec le bon nom ne sont plus rapprochées.
Un exemple parmi d'autres :
De: Stéphane Péneau stephane.pen...@wanadoo.fr
Oui oui, j'ai bien compris, et j'ai fait le découpage de la rue, mais
pourquoi est-ce que RTE DE PONTCHATEAU-PLANCHE MAR (440500139R) est
listée dans les voies sans adresses alors que le rendu affiche des
numéros :
Merci mais je me suis mal exprimé : je ne cherche pas les /pistes cyclables/
(telles qu'affichées notamment dans OCM) mais les /balades /remontées par
des cyclistes.
--
View this message in context:
Le 10 novembre 2014 15:03, Shohreh codecompl...@free.fr a écrit :
J'ai cliqué sur Export en haut et ça télécharge le fichier de 1.4MB.
J'ai besoin des quatre coins (coordonnées) de la carte pour construire mon
URL : comment faire?
Salut,
pour ma part quand je clique sur le bouton Exporter
Bonjour
Nominatim ?
Lorsque je rentre une demande de lieux, il me propose une liste et en
cliquant sur la donnée, la carte se déplace sur ledit lieu et dans la
boite s'affiche les 2 coordonées
Cordialement
--
David Crochet
___
Talk-fr mailing
- Mail d'origine -
De: Sylvain Maillard sylvain.maill...@gmail.com
À: Discussions sur OSM en français talk-fr@openstreetmap.org
Envoyé: Wed, 12 Nov 2014 16:01:52 +0100 (CET)
Objet: Re: [OSM-talk-fr]Site web pour récupérer coordonnées coin
gauches, coin droite?
Le 10 novembre
2014-11-12 14:59 GMT+01:00 Shohreh codecompl...@free.fr:
Merci mais je me suis mal exprimé : je ne cherche pas les /pistes cyclables/
(telles qu'affichées notamment dans OCM) mais les /balades /remontées par
des cyclistes.
Les balades d'ordre privées ne sont (ne doivent pas être) strockées
Par contre on peut enregistrer les traces GPS des balades, cela permet d'aider
les contributeurs pour tagger les voies ouvertes aux vélos. Pour récupérer les
traces c'est déjà moins évident :
- https://www.openstreetmap.org/traces/tag/velo
Francisco
- Mail original -
De: Pieren
Hello, la liste,
Peut-on m’indiquer une solution pour la question qui m’est posée par un jeune
étudiant :
Pour mon projet de diplôme je travaille en binôme avec ma pote Milena sur le
val de Suse, en italie.
Pour analyser le territoire on utilise Open Street Map. Sauf qu'en fait on ne
parvient
Bonsoir,
Sébastien Dinot a écrit :
Mes propositions de stand OSM et d'atelier sur JOSM viennent d'être
retenues par les organisateurs de l'édition 2014 de Capitole du Libre
qui se déroulera les 15 et 16 novembre prochains à Toulouse :
http://2014.capitoledulibre.org/
Le stand sera tenu
Salut,
pour l'export en svg il y a plusieurs solutions qui fonctionnent pas mal,
mais la plus simple est sur le site principal : le bouton partager ouvre
un onglet à droite, avec la possibilité de faire un export au format svg.
Ca fonctionne aussi pour de grandes zones !
Par contre il n'y aura
Le 13/11/2014 à 09:48:49 +1100 Christian Rogel
christian.ro...@club-internet.fr a écrit
Objet: [OSM-talk-fr] Obtenir une carte avec des courbes de niveau avec
Maperitive :
Est-ce, d'après toi, la bonne amorce pour obtenir ces courbes en .svg ?
J'ai utilisé avec succès le programme en ligne
Bonjour,
Illustrator n'est pas connu pour son respect des standard du svg, le
problème vient probablement de là :
https://groups.google.com/forum/?fromgroups#!searchin/maperitive/illustrator/maperitive/a06P381rkH8/Xg7R9CIODqQJ
More info on this - it seems to be a bunch of people working for this
company:
http://wiki.openstreetmap.org/wiki/%C3%96V_Firma_Mentz_Datenverarbeitung_GmbH
I've had no reply from the mapper that I tried to contact (although they
have fixed at least one of the problems that they created) so
Yes, I looked at the first user in the list and the first page of changesets
loaded with one close to me which is a railway platform apparently in the
middle of a housing estate.
http://www.openstreetmap.org/changeset/24439915
As it’s a U_Bahn entry I'm assuming its meant to be a platform on
Interestingly, the source given is the German phrase for surveyed in the
field...
Richard Symonds
Wikimedia UK
0207 065 0992
Wikimedia UK is a Company Limited by Guarantee registered in England and
Wales, Registered No. 6741827. Registered Charity No.1144513. Registered
Office 4th Floor,
Greetings, all.
Mentz (aka mdv) is a German company that provides the journey planner used by
a number of the traveline regions, as well as for Transport for London. As you
may recall from my previous posts, a number traveline regions are now using OSM
as the GIS. We found a problem
Here's just one example of an odd type of edit. Adding priority=yard to rail
objects.
http://www.openstreetmap.org/way/96973880
I did not see anything on the schema page to suggest odd tags:
OK. I agree that it is odd, but my ability to influence them will be restricted
to UK edits that they will have done (theoretically) to resolve issues that we
have raised with them. I'll take a look at some of the other edits referred to
in the trail below.
Regards,
Stuart
-Original
On 12/11/2014 10:59, Stuart Reynolds wrote:
Please pass the details back to me, and I will discuss it with them and also
with the community if things need reverting.
Thanks Stuart. All of my detailed comments so far have been on
changesets. I went through
According to http://hdyc.neis-one.org .The ÖV Firma Mentz Datenverarbeitung
GmbH users that have edited in the UK are:
tklug
thomas-oliver-berlin
mjessen
Gavaasuren
haytigran
rotkelch
taoxue
I'm sure many edits are perfectly valid, but clearly there are concerns with
some.
Cheers
Andy
On 12/11/14 11:40, Andy Robinson wrote:
According to http://hdyc.neis-one.org .The ÖV Firma Mentz Datenverarbeitung
GmbH users that have edited in the UK are:
tklug
thomas-oliver-berlin
mjessen
Gavaasuren
haytigran
rotkelch
taoxue
I don't see anything to link that last one to mentzdv?
Tom
taoxue is listed on:
http://wiki.openstreetmap.org/wiki/%C3%96V_Firma_Mentz_Datenverarbeitung_GmbH#Users_that_work_for_us
Cheers
Andy
-Original Message-
From: Tom Hughes [mailto:t...@compton.nu]
Sent: 12 November 2014 12:03
To: Andy Robinson; 'Stuart Reynolds'; 'SomeoneElse';
Mdv tell me that they have replied to SomeoneElse - presumably privately, as
I didn't see it on the list - and have withdrawn the editor in question. They
will also send a response to the list.
Regards,
Stuart
-Original Message-
From: Andy Robinson [mailto:ajrli...@gmail.com]
Sent: 12
For completeness, I've also added a changeset discussion comment to:
http://www.openstreetmap.org/changeset/26688781
Cheers,
Andy
___
Talk-GB mailing list
Talk-GB@openstreetmap.org
https://lists.openstreetmap.org/listinfo/talk-gb
I happened to notice
https://www.openstreetmap.org/changeset/24646348
while looking at something else. It looks a bit odd - doesn't seem to
match the underlying imagery.
The previous changeset by this user
https://www.openstreetmap.org/changeset/24646289
is a similar bunch of deletions,
i'm taking a look at them now.
On 11/12/14 1:01 PM, SomeoneElse wrote:
I happened to notice
https://www.openstreetmap.org/changeset/24646348
while looking at something else. It looks a bit odd - doesn't seem to
match the underlying imagery.
The previous changeset by this user
On 11/12/14 2:36 PM, Richard Welty wrote:
i'm taking a look at them now.
i see tags deleted, and then restored by pnorman_mechanical.
so there was a problem, but it seems that it's long since fixed
(thanks paul)
richard
--
rwe...@averillpark.net
Averill Park Networking - GIS IT Consulting
On 12/11/2014 19:43, Richard Welty wrote:
On 11/12/14 2:36 PM, Richard Welty wrote:
i'm taking a look at them now.
i see tags deleted, and then restored by pnorman_mechanical.
so there was a problem, but it seems that it's long since fixed
(thanks paul)
richard
Some of them were reverted but
On 11/12/14 2:55 PM, SomeoneElse wrote:
On 12/11/2014 19:43, Richard Welty wrote:
On 11/12/14 2:36 PM, Richard Welty wrote:
i'm taking a look at them now.
i see tags deleted, and then restored by pnorman_mechanical.
so there was a problem, but it seems that it's long since fixed
(thanks paul)
Hi,
On Sun, Nov 09, 2014 at 10:33:58AM -0500, Richard Welty wrote:
1) the Census Bureau has an area based version of zip codes
(postal codes to the non-US types) called ZCTA. it is not a
complete representation, it covers about 30,000 of the
50,000 unique zip codes, but it covers all the ones
On Wed, Nov 12, 2014 at 1:10 PM, Sarah Hoffmann lon...@denofr.de wrote:
If I understand you right then the 'secondary cities' are
the actual cities/towns/villages already mapped as either
place nodes or administrative boundaries. Those are already
used by Nominatim.
So it seems the primary
I share Sarah's skepticism about importing ZCTAs. ZCTAs are generalized
polygons created by the US Census Bureau and derived from *point* data
furnished by the US Postal Service. Given the variability of ZIP codes in
general, and the fact that OSM is two steps removed from the source data
makes
1 - 100 of 106 matches
Mail list logo
