Hi,
It is really a SD6053, I have a SD6052 and using external 1MHz still running
OK. Bought about 15 Years ago as inop and found 500MHz range was bad... also
installed a missing 9th digit nixi tubes and the driver IC and ever since
it is my favorites.. The 6052 main board has all the IC
Hi Chris,
use the TAC32 software to initialize the gps board probably when you power
up it comes into binary mode,
not NMEA mode
Rgds Ernie.
-Original Message-
From: Chris Albertson albertson.ch...@gmail.com
To: Discussion of precise time and frequency measurement
Happy New Years to Everybody,
Anybody can help with a short data, or info about a STC TCXO
Type TCXO 455 L1454
TRL 903 007/1
Freq 20MHz
Size 2x2x1/2 inches six pin arrangements.
Specially interested the ops voltage and the pin
test
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Happy New Years to Everybody,
Anybody can help with a short data, or info about a STC TCXO
Type TCXO 455 L1454
TRL 903 007/1
Freq 20MHz
Size 2x2x1/2 inches six pin arrangements.
Specially interested the ops voltage and the pin
Hi,
found an interesting unit. I think it is not for the usual pocket money for
a time-nuts.
have a look...
http://www.chronos.co.uk/pdfs/rac/labsat.pdf
Rgds Ernie.
-Original Message-
From: John Green wpxs...@gmail.com
To: time-nuts@febo.com
Sent: Mon, Nov
Hi time-nuts,
I have about 25 or 30ea CMC ALLSTAR GPS board.
Software/hardware version 265-613940-513, var 001. with Racon 10.000MHz TCXO
Is there any useful application around??.. I tried to use in Brooks Shera
board but give a sloppy result.
If anybody need a board please contact me
Hi,
many thanks to everybody who responded.. now everything is clear..
thanks a lot.
Best regards,
Ernie.
-Original Message-
From: Rex r...@sonic.net
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Thu, Nov 4, 2010 2:54 am
Subject: Re:
Hi Time nuts,
Just recently started my Z3801 in my new location and noticed the following
discrepancy
The unit is running more then 145 Hrs from the new start up.and the life
time display from the starting time just shows 48 digit more time..in
other words:
started at life time
E-pay
-Original Message-
From: Richard W. Solomon w1...@earthlink.net
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sat, Oct 16, 2010 8:47 pm
Subject: Re: [time-nuts] Discipline a rubidium driven net4501 with a Garmin LVC
18?
Search ?? Where ??
Hi Jason,
Have a look on ebay.280567398921.
quite good TCXO.
Rgds Ernie.
-Original Message-
From: Jason Rabel ja...@extremeoverclocking.com
To: time-nuts@febo.com
Sent: Fri, Oct 15, 2010 9:10 pm
Subject: Re: [time-nuts] Discipline a rubidium driven net4501 with a Garmin
Hi,
In many military Russian locator and other eqmnt, also from the east block
microwave units/chain used the shoulder screw to have perfect alignment between
wave guides...
I was the same with the Czech Republic radars too.
I have been operated many above mentioned units.
Rgds
Stanley,
how about the TIME-GURU name?
-Original Message-
From: Stanley Reynolds stanley_reyno...@yahoo.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Wed, Aug 25, 2010 6:44 am
Subject: Re: [time-nuts] Bulletin Board / Forum
No, all
Hi David,
did you chked the PIC 3.3 voltage?? because it is the key point if you have
garbled msg.
Rgds, Ernie.
-Original Message-
From: Didier Juges did...@cox.net
To: Time-Nuts time-nuts@febo.com
Sent: Thu, Aug 19, 2010 2:28 pm
Subject: Re: [time-nuts] Tbolt and iCruse
HI Julien,
Do you have a detailed info, docu about the TrueTime XL-DC??
I have 2ea of this unit and one is not going to lock...
Any experience or help appreciated.
Rgds Ernie.
-Original Message-
From: Julien Goodwin time-n...@studio442.com.au
To: time-nuts@febo.com
Hi,
Ok, I have the info from the web but it is not too much.
I got GPS data but seems to me that the ECF is out of limit? and the
digital word is not changing...frozen but sometime very seldom it is locked
properly after tickling a few hrs.then no luck for the next few
Hi Dick,
I chked already and found satis.but what current load shall I chk and what
is the nominal voltage??
Rgds Ernie.
-Original Message-
From: Richard W. Solomon w1...@earthlink.net
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Mon,
Hi Gents,
Just received a few hours ago my new Fluke monitor and just right now making
the mods... I used 2SMD diode and the voltage on the CPU is 3,6 Volt.
hopefully will work properly..
Will report later on any problem.
Rgds Ernie.
-Original Message-
From:
Hi,
the simple stupid answer is: 24/365
Ernie.
-Original Message-
From: Bob Camp li...@rtty.us
To: 'Discussion of precise time and frequency measurement' time-nuts@febo.com
Sent: Thu, Jun 3, 2010 6:07 pm
Subject: Re: [time-nuts] Training period for a Rb clock using GPS
Hi
If
Hi,
there is a modified W5OJM GPSDO and all the PCB and so on..please see the
flwng link
http://pagesperso-orange.fr/f5cau/base_temps_gps_f5cau/page_basegpsF5CAU.htm
Basically a well designed mods of the above idea...and no special
parts. and it runs from 10MHz.
Rgds
Hi Dick,
Please contact directly with F5CAU about the PCB and PIC code.
also there is a VE2ZAZ based GPSDO..please see this link.
http://rxcontrol.free.fr/PicGPS/index.html
Rgds Ernie.
-Original Message-
From: Richard W. Solomon w1...@earthlink.net
To: Discussion
Hi Norm,
This pretty ugly flat ribbon connector has 26 pins?? or just a 20
pins
Rgds Ernie.
-Original Message-
From: normn3...@stny.rr.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Mon, May 10, 2010 5:29 am
Subject:
Hi Art,
Thanks for the info, but until now I had no time to chk the circuit
But now here is the finding. The monitor board has the 7805 SMD version and
I was feeding from +12Volt and after a while
the SMD voltage regulator overheated and started to drop the voltage and it
was
Hi,
after about 4-5 month I got the trouble with the LCD fluke monitor It
was displaying funny nbrs and characters. and sometime it was stock in one
position.../ in one msg / and displaying incorrect time/date...
Trimble was about 45 Celsius and the Monitor was displaying
Hi Didier,
I mean when I remove the power from the monitor and let it cool down the after
about 1Hrs it starting to work again normal,
the later on displaying garbled msg.. like something is overheating??
Rgds Ernie.
-Original Message-
From: Didier Juges did...@cox.net
Hi,
you can not go step like 5.5 mm or so the best thing is to cut a new M6
thread because it is the next most available screw size
in metric.
I had a lot of problem with the American size thread but the best solution was
always the next higher most common metric size..
Rgds
Hi David,
please put me on the list, I need 1ea PCB board..
My call is HG5ED.
Best regards,
Ernie.
Ps. hope Paypal is OK?
-Original Message-
From: David C. Partridge david.partri...@dsl.pipex.com
To: teksco...@yahoogroups.com; tekscop...@yahoogroups.com;
Hi Art,
Thanks a lot for the link, and the info about the Motorola nav module.
I am very sorry to hear the bad news from Randy, he helped a lot to me before.
Thanks again and Marry Xmas.
Ernie.
HG5ED
-Original Message-
From: Art Sepin a...@synergy-gps.com
To: Discussion of
Hi Everybody,
Many thanks for all info regarding this module...It is running with TAC32
software but unable to switch over to self survey mode... the battery is low,
only +1,4Voltage.
Best regards,
Ernie.
-Original Message-
From: Brian Kirby kilodelta4foxm...@gmail.com
To:
Hi,
anybody has a little more details or application about the above mentioned
Motorola module???
I have a ROTADATA Telecommunication Product / Type ES 1563 / made in UK...
having this Module GPS inside
but nothing else seems to me as a Timing GPS module.
Any useful info
Hi Ulrich,
Thanks a lot for the reply
still my Q is ... when you open the parameters window it is asking what
is line nbr of tracked/untracked sats? and the default is line nbr
11...and sats data line nbr from 13 to sats data line to 18, but I believe
if I change the
Hi,
this Windows XP serial port problem is the biggest headache when you
run a program which is not directly written into XP environments...
I have an old compi running under WIN 98SE and never got any
problem.
just think... when was the Tbolt software developed. many years
Hi Stan,
I have all the older version of the Z38XX SW.
Let me know which date do you like and I can forward to you.
I did not installed yet any-one because the project not yet completed.
Rgds Ernie.
-Original Message-
From: Stan swp...@earthlink.net
To: time-nuts@febo.com
Sent:
HI Murray,
got the same problem and found that the program looks as default COM1
port...
Please chk and change port.
Rgds Ernie.
-Original Message-
From: Murray Greenman murray.green...@rakon.com
To: jmi...@pop.net; hol...@hotmail.com
Cc: time-nuts@febo.com
Sent: Thu, Jun 18, 2009
Hi Didier,
need username and password, I tried but no luck.
Rgds Ernie HG5ED.
-Original Message-
From: Didier did...@cox.net
To: 'Discussion of precise time and frequency measurement'
time-nuts@febo.com
Sent: Fri, 17 Apr 2009 3:16 am
Subject: Re: [time-nuts] Homebrew GPSDO
Bruce,
This is what I tried but did not work.
I will try from my second PC later on.
Rgds Ernie.
-Original Message-
From: Bruce Griffiths bruce.griffi...@xtra.co.nz
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Fri, 17 Apr 2009 8:43 am
Subject:
Hi Chris,
Did you get it from China?
Can you make a picture from both side?
Rgds Ernie.
-Original Message-
From: Chris Stake st...@btinternet.com
To: time-nuts@febo.com
Sent: Thu, 16 Apr 2009 6:17 pm
Subject: [time-nuts] Homebrew GPSDO
Hi,
I have purchased a Rockwell TU00-D200
Hi Gents,
It is actually a Rockwell Microtracker gps module and not a JUPITER
board!!
5channel +5V board... also the 20pin header is different then the
JUPITER.
I still have a few docs . Please contact offline if you need more.
Rgds Ernie.
-Original Message-
From: Eamon Skelton
No too mention other people having other mother tongue.
Cheers, Ernie.
-Original Message-
From: Magnus Danielson mag...@rubidium.dyndns.org
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Fri, 16 Jan 2009 10:19 am
Subject: Re: [time-nuts] FTS Datum
Hi Peter,
Thanks for the info, in the mean time got additional docs, now need
more time to play with it.
Best regards and Marry Xmas,
Ernie.
-Original Message-
From: Peter Vince pvi...@theiet.org
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Sat,
Hi Gents,
Having a Fe5680 Rub freq standard but can not figure out the 9 pin
connector..
It is a version with 4x8 DIP SW inside and no SMA output connector,
inside can measure the 8,388,608 Hz but can not detect the 1PPS
output although I do not know which pin should have the +5Volt
Hi Gents,
anybody has a manual or more detailed info about this unit?
I just got 2ea unit / rack mounted / but one of them is inop... GPS
does not receiving any sat the rest of the unit according to the
BITE test is OK
Swapping the GPS module sub assembly in the rack does not help
Hii Warren,
have a look on this
link...http://www.jrmiller.demon.co.uk/projects/ministd/frqstd0.htm
and he is using the 10KHz...rpt 10KHz not the 100Hz..compare with
your circuit diagram... / I would like to see / or the other solution
just make the same circuit and with your testing
Hi Gents,
Just fired up my LPRO-101, bought a year ago or more on Ebay from
Switzerland and found unserviceable
It is a 24V vesion and upon switching ON only 0,47A is the current
consumption and the 10MHz wondering up/down and
never stops. No lock.
Suspect the Heating part is defective
Hello,
I am fighting to get 1PPS from my Trimble Tbolt GPSDO. Self-survey
completed and via software the 1PPS also activated
but no1PPS output on the BNC connector. Already tried all the software
possibilities but no help
the 1PPS 74HC04 driver IC does does not get any input signal.
On the
Sorry but forget to mention the Unit NOT from TAPR
-Original Message-
From: [EMAIL PROTECTED]
To: time-nuts@febo.com
Sent: Thu, 20 Nov 2008 10:20 am
Subject: Re: [time-nuts] Trimble 1 PPS
Hello,
I am fighting to get 1PPS from my Trimble Tbolt GPSDO. Self-survey
completed and via
100MHz HP digital scope.
-Original Message-
From: Hal Murray [EMAIL PROTECTED]
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Thu, 20 Nov 2008 10:59 am
Subject: Re: [time-nuts] Trimble 1 PPS
the 1PPS 74HC04 driver IC does does not get any input
-Original Message-
From: [EMAIL PROTECTED]
To: time-nuts@febo.com
Sent: Thu, 20 Nov 2008 10:45 am
Subject: Re: [time-nuts] Trimble 1 PPS
Sorry but forget to mention the Unit NOT from TAPR
-Original Message-
From: [EMAIL PROTECTED]
To: time-nuts@febo.com
Sent: Thu, 20 Nov
I have to apologize because it was my failure to set up this Digital
storage HP scope. Now I got the 1 PPS.it is working.
Rgds Ernie.
-Original Message-
From: Hal Murray [EMAIL PROTECTED]
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Thu, 20 Nov
Hi Jim,
No wonder, my girlfriend would do the same...
Rgds Ernie.
-Original Message-
From: Jim Palfreyman [EMAIL PROTECTED]
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Sun, 16 Nov 2008 2:38 pm
Subject: [time-nuts] Oh the horror
Only this group
Hello,
I am running the HP Z3801A after a long time again, more then 150hrs
from the new ON status but I have never seen
on the TI to GPS small window better figure then 1,5E-9. the
avarage is 1,3E-8 and seldom goes to 10E-9.
And running parallel the FURY board with a TEMEX OCXO and
Hi Björn,
According to HP spec sheet It should be better then just a few 1,5E10-9.
Rgds Ernie.
-Original Message-
From: Björn Gabrielsson [EMAIL PROTECTED]
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Thu, 13 Nov 2008 12:35 pm
Subject: Re:
Hello Said,
Thanks for the detailed reply, it makes sense.
But both unit , the HP and the FURY board running under the same
software simultaneously / GPS Con / and I was mentioning the same small
windows TI to GPS, and the FURY displays much better figures then
HP.but probably each units
Hi Dick,
So far not yet received but the unit usually goes thru the custom
office long process...
Rgds Ernie.
-Original Message-
From: Richard W. Solomon [EMAIL PROTECTED]
To: time-nuts@febo.com
Sent: Tue, 4 Nov 2008 3:55 am
Subject: [time-nuts] Trimble T-Bolt Order
Have folks
Hello Genst,
Anybody has info/datasheet, pinout / 7 pin / of this Trimble Rodal
Antenna, P/N 240066-32..?
Thanks for your help.
Rgds Ernie.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
Gents,
Sorry if my mail give the impression that I am complaining about the
blown PSU, it is because my English is not as good as it should be.
just wanted some help to repair the unit.and in the mean time I
have already installed the GPSDO into a nice small box with a home
built PSU
My Trimble GPSDO just arrive but I have a problem with the POWER Supply
Unit.
After connecting all wires to the Trimble plug and made a check if all
voltage is correct and left the PS unit to run
on the table without load/connecting to the GPSDO, about 15min got a
big bang and the Power
Hi Gents,
Anybody having a data-sheet or any other info about the following item:
DATUM OCXO 06
023034-005
10.000MHz
other code on the back side:
033666
41597-005
Size is about 1,2x1,2x0,5... I have the pin assignment/voltage... but
no any details.
Thanks and best regards,
Ernie.
Hi Mike,
Maybe this one is interested to you...150285595219
Rgds Ernie HG5ED
-Original Message-
From: Mike Naruta AA8K [EMAIL PROTECTED]
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Sun, 24 Aug 2008 4:39 pm
Subject: Re: [time-nuts] TBolt question
HI,
I am not among the preorder list, but should like to be on the second
round if possible.
Should like to have 2ea unit.
Many thanks and best regards,
Ernie.
-Original Message-
From: Tom Van Baak [EMAIL PROTECTED]
To: Discussion of precise time and frequency measurement
Hello,
I am receiving also with GARMIN V. / Location FRANKFURT/M /
Will chk? the status also with my M12+T and Jupiter-T but need more time.
Rgds, Ernie.
-Original Message-
From: Poul-Henning Kamp [EMAIL PROTECTED]
To: Discussion of precise time and frequency measurement
Hi Roy,
Not directly to your question but back to the RCC 8000, do you have any
manual/documentation???
I have also one and should like to receive the 60kHz here in Frankfurt/M...any
help appreciated.
Rgds Ernie.
-Original Message-
From: Roy Phillips [EMAIL PROTECTED]
To:
Happy New Year.
Boldog Uj Évet.BUÉK. as we say in Hungary.
Ernie.
HG5ED
-Original Message-
From: Mike Feher [EMAIL PROTECTED]
To: 'Discussion of precise time and frequency measurement' time-nuts@febo.com
Sent: Tue, 1 Jan 2008 1:16 am
Subject: Re: [time-nuts]
Hi Mike,
I knew that you are Hungarian origin from your name..I use to travel a lot
to the US when PANAM
was big, but not anymore. Working here in Frankfurt/M and going home to
Budapest very often.
Keep in touch Misi,
Cheers, Ernie.
-Original Message-
From: Mike
Hi,
I am looking a description/manual for Radio Clock? type RCC 8000 receiver...
assume it is tuned ?60kHz . and should like to convert? to DCF
77..every advise is appreciated.
Rgds, Ernie
-Original Message-
From: Ulrich Bangert [EMAIL PROTECTED]
To: 'Discussion of precise
Hi Rob,
Yes , I tried RadioClocks UK but no helping hand...they offered if I ship the
unit back to the factory,
??? they give a price for the conversion./ assume to expensive /...
??? I am living about 25km from DCF77 in Germany, so believe the receiver
part is not a big deal,
Hi Nigel,
Thanks for the offer, well I am not in a hurry, just take your time.I have
many other project to go
on.
About 10-15years ago I tried to copy MFS but due to the close proximity of DCF
I was unable to copy maybe I did not pay attention to the selective active
antenna and
Hello,
Anybody can point a link to get manual or more info about a? LPRO-101? rubidium
osci.
Thanks a lot,
Ernie Peres HG5ED
Ps.? Marry Xmas and Happy New Year to everybody.
More new features than ever. Check out the
Thanks for the info but unable to open the link. tried also Google search
but no help
Cheers, Ernie.
-Original Message-
From: Stuart [EMAIL PROTECTED]
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Thu, 20 Dec 2007 4:38 pm
Subject: Re:
Hi Peter,
Thanks, all OK.
Ernie.
-Original Message-
From: Peter Vince [EMAIL PROTECTED]
To: Stuart [EMAIL PROTECTED]; Discussion of precise time and frequency
measurement time-nuts@febo.com
Sent: Thu, 20 Dec 2007 10:30 pm
Subject: Re: [time-nuts] new subject
It's temex with
Hi Tom,
I have a few ONCORE docs but need the correct P/N in order to determine the
type of your board
Question for what purpose do you like to use it?
Best regards,
Ernie.
-Original Message-
From: Tom Clifton [EMAIL PROTECTED]
To: time-nuts@febo.com
Sent:
); SAEximRunCond expanded to false
Errors-To: [EMAIL PROTECTED] RETRY
Hi Said,
Yes, I did removed the SMA. and the OCXO is running well from the 10.50V PCB
board and the display shows all the details of the OCXO.
Cheers, Ernie.
-Original Message-
From: [EMAIL PROTECTED]
To:
); SAEximRunCond expanded to false
Errors-To: [EMAIL PROTECTED] RETRY
Hi Said,
?my board is running with this Ebay OCXO? / 320173558948 /? and this is
pin-compatible with the PCB.
the first results is not bad compared with my HP Z3801.
Time to time this ebay seller offering this
); SAEximRunCond expanded to false
Errors-To: [EMAIL PROTECTED] RETRY
Hi Said,
Just info, yesterday I have received the Unit.
It went thru the German Customs too. No problem.
Many thanks and regards,
Ernie HG5ED
-Original Message-
From: [EMAIL PROTECTED]
To: [EMAIL
); SAEximRunCond expanded to false
Errors-To: [EMAIL PROTECTED] RETRY
Hi Said,
Many thanks, the money is on the way hope you will receive soon.
Best regards,
Ernie HG5ED
-Ursprüngliche Mitteilung-
Von: [EMAIL PROTECTED]
An: time-nuts@febo.com
Verschickt: Di., 9.
); SAEximRunCond expanded to false
Errors-To: [EMAIL PROTECTED] RETRY
Hi SAID,
I am interested about this OEM PCB with external OCXO, due to the reason I have
3 HP OCXO 10811 and the other one, so please put me on the waiting list.
Many thanks and best regards,
Ernie. HG5ED
76 matches
Mail list logo