On Fri, Oct 26, 2018 at 11:27 AM ew via time-nuts
wrote:
> It is two layer and I added an amp with two transformer outputs.
> I am not going to get in to board selling or shipping to oldBert
>
>
Although it is not the cheapest, OSHPark will let you upload your board as
gerbers and share it with
: [time-nuts] OCXO Board HiI
think what is needed is somebody to stand up and say “ok, I’ll handle all
theordering and shipping stuff”. No, that somebody is not me …. sorry about
that. There are a *lot* more board designs than just this one floating around.
This couldturn into a fairly complex
more Please
> BertSent from my Galaxy Tab® A
> Original message From: Patrick Murphy
> Date: 10/26/18 3:35 PM (GMT-05:00) To: time-nuts@lists.febo.com Subject:
> Re: [time-nuts] OCXO Board Not to be a "me too", but I think there will
Hi
I think what is needed is somebody to stand up and say “ok, I’ll handle all the
ordering and shipping stuff”. No, that somebody is not me …. sorry about that.
There are a *lot* more board designs than just this one floating around. This
could
turn into a fairly complex little enterprise.
I have added OSA 8663 was not easy no more Please
BertSent from my Galaxy Tab® A
Original message From: Patrick Murphy
Date: 10/26/18 3:35 PM (GMT-05:00) To: time-nuts@lists.febo.com Subject: Re:
[time-nuts] OCXO Board Not to be a "me too&qu
I do not think you understand under no circumstances will I get in to the board
business.I do all the boards for an off list group 20 designs last week from
China.Willing to help some one to do this board it was part of last weeks
shipping Corby was first to test it so I am willing to share it
Al OCXO's have Ref outputs will look at adding EFC SMA. Send me the footprint
of the 8663 and I will take a lookBert
In a message dated 10/26/2018 2:35:35 PM Eastern Standard Time,
hol...@hotmail.com writes:
A SMA connector for EFC input would be nice. Also a footprint for the
Oscilloquartz
A SMA connector for EFC input would be nice. Also a footprint for the
Oscilloquartz 8663 DOCXO... these are rather nice oscillators. They do have a
ref voltage output.
___
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
I'm not up to doing the whole project, but I would certain be interested in 2 or
3 boards for sure.
Wes Stewart N7WS
On 10/26/2018 5:51 AM, Bob Martin wrote:
Bert,
That looks like a useful board. Certainly some of the oscillators I'm giving
away would fit nicely on it. Since it looks
Bert,
That looks like a useful board. Certainly some of the oscillators
I'm giving away would fit nicely on it. Since it looks like a two
layer board, a quick check at pcbway.com puts the cost at $.79
apiece at the 100 quantity exclusive of shipping.
Best,
Bob Martin
On 10/26/2018 4:17
10 matches
Mail list logo
