I took delivery last Thursday of 8 10X10 boards 10 each 2 days DHL from China
total cost $ 86 Bert Kehren Sent from my Galaxy Tab® A
-------- Original message --------From: Bob kb8tq <[email protected]> Date:
10/26/18 4:21 PM (GMT-05:00) To: Discussion of precise time and frequency
measurement <[email protected]> Subject: Re: [time-nuts] OCXO Board HiI
think what is needed is somebody to stand up and say “ok, I’ll handle all
theordering and shipping stuff”. No, that somebody is not me …. sorry about
that. There are a *lot* more board designs than just this one floating around.
This couldturn into a fairly complex little enterprise. If the first boards
really are “well under $1 each” sort of boards (and I’m quite sure they
are),doing this one board at a time is going to be …. errr… nutty. I’d suggest
that something like groups of 5 (or maybe even 10 if then are < <. $1 is likely
the smallest rational increment to play with. When shipping is more than the
stuff in the envelope … that’s silly. Since you pretty much always see people
coming back a while later wondering if they can get more boards on anything
like this, getting a few extras is nevera bad idea. So who has way too much
time on their hands and *really* likes driving to the post office?Hmmm …. not
many hands raised. Probably a good idea to include the thought that there
*should* be something in the deal for the poor person doing all the work. I’d
saythey should get at least as much as the post office does …. just saying
…..Bob> On Oct 26, 2018, at 3:35 PM, Patrick Murphy <[email protected]>
wrote:> > Not to be a "me too", but I think there will be some interest for
this> board. Including a couple for me. :-)> > -Pat (KG5YPQ)> >> Dave wrote:>>
Yep!! Count me in for a few also!! maybe 4 or 5...>> >> Dave M> >> Wes wrote:>>
I'm not up to doing the whole project, but I would certain be>> interested in 2
or 3 boards for sure.>> >> Wes Stewart N7WS>> >> On 10/26/2018 5:51 AM, Bob
Martin wrote:>>> Bert,>>> >>> That looks like a useful board. Certainly some of
the oscillators>>> I'm giving away would fit nicely on it. Since it looks like
a two>>> layer board, a quick check at pcbway.com puts the cost at $.79>>>
apiece at the 100 quantity exclusive of shipping.>>> >>> Best,>>> >>> Bob
Martin>>> >>> On 10/26/2018 4:17 AM, ew via time-nuts wrote:>>>> >>>> >>>>
There recently was a request for an OCXO board. I did a layout, see>>>>
attached and had Corby do his usual QC test.>>>> >>>> >>>> If some one is
interested to make boards and maybe sell to other>>>> time nuts please contact
me off list and I will get you code and>>>> possible suppliers.>>>> >>>> Board
does not have an amp but could be added, if so, please>>>> advise, what should
be added. Regardless what the direct output>>>> will remain>>>> >>>> Bert
Kehren>>>> >> > _______________________________________________> time-nuts
mailing list -- [email protected]> To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com> and follow the
instructions there._______________________________________________time-nuts
mailing list -- [email protected] unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.comand follow the
instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
