I have added OSA 8663 was not easy no more Please
BertSent from my Galaxy Tab® A
-------- Original message --------From: Patrick Murphy <[email protected]>
Date: 10/26/18 3:35 PM (GMT-05:00) To: [email protected] Subject: Re:
[time-nuts] OCXO Board Not to be a "me too", but I think there will be some
interest for thisboard. Including a couple for me. :-)-Pat (KG5YPQ)>Dave
wrote:>Yep!! Count me in for a few also!! maybe 4 or 5...>>Dave M>Wes wrote:>
I'm not up to doing the whole project, but I would certain be> interested in 2
or 3 boards for sure.>> Wes Stewart N7WS>> On 10/26/2018 5:51 AM, Bob Martin
wrote:>> Bert,>>>> That looks like a useful board. Certainly some of the
oscillators>> I'm giving away would fit nicely on it. Since it looks like a
two>> layer board, a quick check at pcbway.com puts the cost at $.79>> apiece
at the 100 quantity exclusive of shipping.>>>> Best,>>>> Bob Martin>>>> On
10/26/2018 4:17 AM, ew via time-nuts wrote:>>>>>>>>> There recently was a
request for an OCXO board. I did a layout, see>>> attached and had Corby do his
usual QC test.>>>>>>>>> If some one is interested to make boards and maybe sell
to other>>> time nuts please contact me off list and I will get you code and>>>
possible suppliers.>>>>>> Board does not have an amp but could be added, if so,
please>>> advise, what should be added. Regardless what the direct output>>>
will remain>>>>>> Bert
Kehren>>>>_______________________________________________time-nuts mailing list
-- [email protected] unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.comand follow the
instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
