I'm not up to doing the whole project, but I would certain be interested in 2 or
3 boards for sure.
Wes Stewart N7WS
On 10/26/2018 5:51 AM, Bob Martin wrote:
Bert,
That looks like a useful board. Certainly some of the oscillators I'm giving
away would fit nicely on it. Since it looks like a two layer board, a quick
check at pcbway.com puts the cost at $.79 apiece at the 100 quantity exclusive
of shipping.
Best,
Bob Martin
On 10/26/2018 4:17 AM, ew via time-nuts wrote:
There recently was a request for an OCXO board. I did a layout, see attached
and had Corby do his usual QC test.
If some one is interested to make boards and maybe sell to other time nuts
please contact me off list and I will get you code and possible suppliers.
Board does not have an amp but could be added, if so, please advise, what
should be added. Regardless what the direct output will remain
Bert Kehren
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
