Original Message-
> From: Francois PIETTE [mailto:[EMAIL PROTECTED]
> Sent: Thursday, May 01, 2008 4:36 PM
> To: ICS support mailing
> Subject: Re: [twsocket] Reverse ARP?
>
> No sure it is what you need, but I've found this:
> http://www.frameip.com/entete-rarp/rarpd.zi
Good point Angus, I'll also look there, the windows private stuff that
is.
Dave B.
> -Original Message-
> From: Angus Robertson - Magenta Systems Ltd
> [mailto:[EMAIL PROTECTED]
> Sent: Thursday, May 01, 2008 3:21 PM
> To: twsocket@elists.org
> Subject: Re:
O
Many thanks Francois. It's the closest yet I think. I'll have a play
and report back, for completeness..
Thanks again.
Dave B.
> -Original Message-
>
> No sure it is what you need, but I've found this:
> http://www.frameip.com/entete-rarp/rarpd.zip
>
> --
> [EMA
"Dave Baxter" <[EMAIL PROTECTED]>
To: "ICS support mailing"
Sent: Thursday, May 01, 2008 3:22 PM
Subject: Re: [twsocket] Reverse ARP?
> Thanks Angus...
>
> I need to do this in a way so as to minimaly impact the network as a
> whole, while "discov
> Oh well, the search continues. Yes, as you say, lots of Google
> hits, but no real details..
I'd read the RFC, it's probably a simple broadcast to which the device
will reply with it's IP, or maybe it's being broadcast anyway and you
just have to listen?
You could also check the massive
the same, some years back.
Thanks again.
Dave B.
> -Original Message-
> From: Angus Robertson - Magenta Systems Ltd
> [mailto:[EMAIL PROTECTED]
> Sent: Thursday, May 01, 2008 9:46 AM
> To: twsocket@elists.org
> Subject: Re: [twsocket] Reverse ARP?
>
> > Does anyon
> Does anyone here know how to implement a "Reverse ARP" request?
>
> I have a piece of hardware that has a network port for remote
> control (RJ45, 10/100 UTP etc) but next to no physical user
> interface, but it does support IP address assignment by DHCP.
If the hardware sets it's IP address u
Hi..
Does anyone here know how to implement a "Reverse ARP" request?
I have a piece of hardware that has a network port for remote control
(RJ45, 10/100 UTP etc) but next to no physical user interface, but it
does support IP address assignment by DHCP.
The documentation says to do a "Ping cX