Public bug reported:
Binary package hint: debian-installer
Hi,
I wan't to install Linux on a notebook/netbook computer without CDROM
drive, but wan't to use some installation features of the alternate CD,
i.e. LVM and encryption which are not supported by the LiveCD.
I copied the contents of th
OK,
I got further with solving the problem, it seems to work now.
Steps I did:
- make a vfat -F 16 onto the USB stick
- syslinux -sf /dev/sdx1 (sdx = USB stick)
- copy the contents of the alternate CD to the stick as close as possible,
including the hidden .disk directory
(I used tar)
- cop
OK, it works that way:
USB stick needs two partitions.
first is a small vfat with copies of the boot files from the CDROM
(isolinux, install,.., but not the dists). copy install/isolinux.cfg to
syslinux.cfg and run syslinux.cfg
second partition is >= 720 MB. copy the CDROM blockwise (dd ...) in
Public bug reported:
Hi,
I just installed Ubuntu 386 from the 8.04.01 alternate CDROM on a small
Acer Desktop PC with AMD dual core processors and ATI SB600 USB
Controller (OCHI4 and EHCI). Performed Ubuntu updates.
The Kernel does not work reliably with the USB driver, I have several
problems:
Additional error hints:
hub 6-6:1.0: cannot reset port 2 (err = -110)
hub 6-6:1.0: Cannot enable port 2. Maybe the USB cable is bad?
--
Kernel not running stable with SB600 USB Controller
https://bugs.launchpad.net/bugs/260891
You received this bug notification because you are a member of Ubuntu
I just installed the 2.6.26 kernel from intrepid. Seems to work, at
least I had no problems within the first minutes of work...
--
Kernel not running stable with SB600 USB Controller
https://bugs.launchpad.net/bugs/260891
You received this bug notification because you are a member of Ubuntu
Bugs,
Nope, it is somewhat better with the 2.6.26 kernel, I don't see problems
with USB storage (sticks, hardware) anymore, but still have problems
with USB hubs, that can cause the kernel to get into some state where
USB is locked.
--
Kernel not running stable with SB600 USB Controller
https://bugs.l
Public bug reported:
Binary package hint: libamazon-ruby
the ruby amazon library and the API it is based on are outdated. It has been
replaced with a new library. See
http://www.caliban.org/ruby/ruby-amazon.shtml
regards
Hadmut
** Affects: ruby-amazon (Ubuntu)
Importance: Undecided
I currently have no ISDN, so I can't verify...
--
syntax error on incoming fax
https://bugs.launchpad.net/bugs/140727
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists
Seems to be solved under intrepid...
--
ssh language environment overridden
https://bugs.launchpad.net/bugs/68130
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubu
** Attachment added: "Output of lspci -vvnn"
http://launchpadlibrarian.net/19877501/lspci-vvnn.txt
--
Display scaling for HDMI
https://bugs.launchpad.net/bugs/277864
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mai
** Attachment added: "xorg.conf"
http://launchpadlibrarian.net/19877511/xorg.conf
--
Display scaling for HDMI
https://bugs.launchpad.net/bugs/277864
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-
** Attachment added: "Output of xrandr --verbose"
http://launchpadlibrarian.net/19877514/xrandr--verbose.txt
--
Display scaling for HDMI
https://bugs.launchpad.net/bugs/277864
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubunt
BTW: The LCD TV claims (on the card package) to have a 1440x900 display.
--
Display scaling for HDMI
https://bugs.launchpad.net/bugs/277864
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ub
There's btw., another problem:
Video players like xine and mplayer cause extreme flickering. There's
obviously anything wrong with the synchronization.
regards
--
Display scaling for HDMI
https://bugs.launchpad.net/bugs/277864
You received this bug notification because you are a member of Ubunt
Well, I guess I found the main problem:
The LCD TV seems to not be prepared to work as a computer monitor, but
to display only Video signals, even on HDMI, so it does not tell the
"HDMI sender", what resolutions it has, it tells what resolutions it
will accept. The TV keeps scaling the video signa
Hi,
I also have RS690 and the same problem under Intrepid. Any news?
regards
--
No sound via HDMI with ATI RS690 under Hardy
https://bugs.launchpad.net/bugs/223608
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
Maybe there's a problem with pulseaudio?
% pulseaudio --check
W: ltdl-bind-now.c: Failed to find original dlopen loader.
--
No sound via HDMI with ATI RS690 under Hardy
https://bugs.launchpad.net/bugs/223608
You received this bug notification because you are a member of Ubuntu
Bugs, which is sub
Would be very nice if there was at least a simple way to bypass cups and
directly send files to USB printers unmodified.
regards
--
latex generated postscript prints bars over some characters
https://bugs.launchpad.net/bugs/370867
You received this bug notification because you are a member of Ub
Since tracker repeatedly crashes on my notebook, it would be nice if you
provide a shell script to cleanly remove all status files of tracker.
These files are widely spread over several directories and it is not a
simple task to reliably clean up tracker and restart from scratch. I did
not yet find
Public bug reported:
Binary package hint: libxml-simple-ruby
Hi,
there's a bug in this ruby library. With some inputs (see the example,
the main problem seems to be the ") it dies with the error message
/usr/lib/ruby/1.8/rexml/entity.rb:76:in `unnormalized': undefined method
`record_entity_expa
** Attachment added: "xmltest"
http://launchpadlibrarian.net/21692887/xmltest
--
/usr/lib/ruby/1.8/rexml/entity.rb:76:in `unnormalized': undefined method
`record_entity_expansion' for nil:NilClass (NoMethodError)
https://bugs.launchpad.net/bugs/322085
You received this bug notification beca
Public bug reported:
Binary package hint: libxml-simple-ruby
Hi,
xmlsimple has a structural bug: See the attached example. Although both
lines in the example xml code are different (first line is ..,
while second is .., xmlsimple generates exactly the same
result for both lines. Thats a bug, but
** Attachment added: "xmltest2"
http://launchpadlibrarian.net/21693374/xmltest2
--
structural design bug in xmlsimple
https://bugs.launchpad.net/bugs/322103
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Yes, still have the problem with 8.10. Couldn't try 9.04, since that
particular machine is productive and needs to work reliably.
regards
Hadmut
--
/usr/bin/compiz does not adjust
/desktop/gnome/applications/window_manager/current
https://bugs.launchpad.net/bugs/277755
You received this bug not
Public bug reported:
Binary package hint: openoffice.org
Hi,
I've written slides for a talk in openoffice (impress) and wanted to
present them also on a small netbook computer. For whatever reason,
ooimpress runs slow on that netbook. Therefore I wanted to export the
slides from impress into PDF
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/21851184/Dependencies.txt
--
slide transitions exported into PDF even if unwanted
https://bugs.launchpad.net/bugs/323561
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubu
Public bug reported:
Binary package hint: brasero
Hi,
when adding directories to the list of things to be burned on a DVD, it is not
possible to remove hidden subdirectories.
E.g. if I want to add my home directory, but then to remove $HOME/.cache the
directory .cache is not listed in the ri
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/27863614/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/27863615/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/27863616/ProcStatus.txt
--
basero
OK,
after upgrading the ati driver seems to work well with the card (which
definitely was not the case the days before I've opened the bug, because
the ati driver is where I started to solve problems.
However, the ati driver does not seem to support the HDMI audio. An HDMI
audio device appears, b
Pedro Villavicencio wrote:
> Thanks for the report but you can actually do this, If you add a
> directory with hidden files brasero shows you a file list on the bottom
> of the burning window it says : "Show the filtered file list" and the
> number of hidden files or filtered on your directory,
N
This is not related to latex. It also happens with other postscript/pdf
files.
--
latex generated postscript prints bars over some characters
https://bugs.launchpad.net/bugs/370867
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubun
Public bug reported:
Binary package hint: cups
Hi,
when sending a postscript file to a printer (or other formats such as
PDF), cups and the print converter fiddle around with it a lot, and it
is not obvious, what exactly cups is doing with the print job.
Currently cups damages postscript files
While trying to circumvent that problem by converting a pdf to
postscript manually with the pdftops that comes with current jaunty and
print with lpr -l I found that the produced postscript is not correct
and can't be printed by my postscript printer. I had to convert the pdf
to postscript on an ol
Problem just occured again with a Laserjet 1320, lpstat -v
device for hp-LaserJet-1320-series:
hp:/usb/hp_LaserJet_1320_series?serial=00CNM1G08790
device for hp-LaserJet-1320-series2: usb://HP/LaserJet%201320%20series
Is it possible that the autoconfiguration of jaunty does not recognize existi
Public bug reported:
Binary package hint: network-manager
Hi,
even if I choose a connection type of "DHCP addresses only" network-
manager still takes the dns search path from the dhcp server and puts it
into /etc/resolv.conf, which does not make sense if you don't use the
provider's DNS server.
Hi,
it is still an issue, at least on my computer (ubuntu jaunty, AMD64). I
have a
00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce
6150] (rev a2)
graphics card, and although I have loaded nvidia-glx-180 (which loads
the glx extension), glx still does not work:
% glxinfo
nam
Public bug reported:
Binary package hint: cups
Hi,
since upgrading to jaunty I sometimes run into the problem that cups
does not recognize that my printer is already known and configured, and
automatically adds a new printer. The Printer is a hp-LaserJet-1300 ,
and sometimes cups generates an ad
Architecture: amd64
CupsErrorLog:
DistroRelease: Ubuntu 9.04
Lpstat:
device for Deskjet-F2100-series:
hp:/usb/Deskjet_F2100_series?serial=CN7CK4T2NP04TK
device for hp-LaserJet-1300: hp:/usb/hp_LaserJet_1300?serial=00CNBD509529
device for hp-LaserJet-1320-series:
hp:/usb/hp_LaserJet_1320_seri
Doesn't work:
Downloading bug...
Bug title: cups autoinstalls printer repeatedly
Collecting apport information for source package cups...
Uploading additional information to Launchpad bug...
short text data...
attachment: BootDmesg.txt...
Traceback (most recent call last):
File "/usr/bin/a
I can confirm that bug (see bug #371261):
Downloading bug...
Bug title: cups autoinstalls printer repeatedly
Collecting apport information for source package cups...
Uploading additional information to Launchpad bug...
short text data...
attachment: BootDmesg.txt...
Traceback (most recent c
/var/log/messages when plugging the printer in:
May 4 22:25:11 andromeda kernel: [12302.789058] usb 2-1: new full speed USB
device using ohci_hcd and address 3
May 4 22:25:11 andromeda kernel: [12303.005230] usb 2-1: configuration #1
chosen from 1 choice
May 4 22:25:11 andromeda kernel: [1230
Public bug reported:
Binary package hint: update-manager
Hi,
since jaunty the update manager does not notify about updates in the
notification area anymore, but instead starts directly. First I believed
this was a regular bug, but then I read in a blog that this was changed
intentionally.
Howev
Public bug reported:
Binary package hint: network-manager
Hi,
the design of Network-Manager is really odd, because the scripts run in
/etc/NetworkManager/dispatcher.d do not have the required pre-up, post-
down phases and do not get the required data such as the network name.
The scripts would
Public bug reported:
Hi,
I have a
01:05.0 VGA compatible controller: ATI Technologies Inc RS690 [Radeon X1200
Series]
graphics card, but can't find a driver with sufficient support in
jaunty.
fglrx denies service because it does not support this card
radeonhd works but slow. It's good for re
To be more precise:
Video decoding works normaly (but with occupying one core of the dual
core cpu with almost 100%) if the video is displayed unscaled. As soon
as the picture is scaled (esp. full screen) it gets extremely slow.
Looks as if the rendering is not made by hardware but software.
--
Public bug reported:
Binary package hint: network-manager
Hi,
this is related to bug #324233, but not the same.
If you use a dns cache (such as pdnsd) together with dhcp, there's a
special requirement: You have to fetch the nameservers from the dhcp
server, but pass them to some script to recon
Well, the old (command line) style ifup/down tools usually run four
different types of scripts in /etc/network:
if-pre-up, if-up, if-down, if-post-down , which makes sense since
several tasks need to be done before taking the interface up or after
putting it down. e.g. Firewall configuration, traf
Public bug reported:
Hi,
since upgrading my notebook to jaunty, I cannot talk to my nokia mobile
phone (6110 Navigator) over bluetooth anymore.
my /dev/rfcomm* devices still exist, but when starting minicom as usual
it just flickers (as if it was scrolling in an endless loop) and does
not allow
I have the same problem with my Toshiba Satellite notebook.
The surprising fact: If I remember correctly, with older releases of
ubuntu the USB WLAN device dis- and reappeared on the lsusb list when
switching on and off even if there was no driver and the device was
completely unsupported. I alway
Ah, and btw., the parameters passed by the DHCP server should also be
given as environment parameters.
--
the way networkmanager stores and passes network information
https://bugs.launchpad.net/bugs/364460
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscr
Well, to get a list of use cases of current ubuntu just run
apt-file search /etc/network/if-pre-up.d
apt-file search /etc/network/if-post-down.d
and I have my own scripts to configure iptables according to the given
network settings, or to set parameters in /proc/sys/...
About environment varia
the script in /etc/NetworkManager/dispatcher.d/01ifupdown supports the
pre-up/post-down phases, but obviously the NetworkManager does not call
it for these phases.
--
the way networkmanager stores and passes network information
https://bugs.launchpad.net/bugs/364460
You received this bug notifica
Public bug reported:
Binary package hint: network-manager
Hi,
network-manager is still highly annoying due to its long list of
shortcomings. I've reported several problems to ubuntu's launchpad and
the upstream developer (see
http://bugzilla.gnome.org/show_bug.cgi?id=582214 ).
Unfortunately, th
Public bug reported:
Binary package hint: ufraw
Hi,
after installing the ufraw package, the gnome file browser is able to
display raw files (my Sony .arw files), but not the ufraw files (so
called ID files) generated by ufraw itself. I guess it is either a
missing MIME type declaration or a miss
Public bug reported:
Hi,
I've upgraded several machines to intrepid. On most of these machines,
an info window appeared after the upgrade offering to replace the old
logout/shutdown button in the gnome panel with a new combined one.
On two of my machines that requester never appeared (on one the
Hi,
Daniel T Chen schrieb:
>
> Another possible cause is the age-old (and well documented) Flash-
> PulseAudio interaction "bug". You can work around that by installing
> libasound2-plugins and running `asoundconf set-pulseaudio', then
> restarting your web browser.
>
That sounds pretty plausi
Actually, I did not see the problem on two freshly installed 8.04
machines.
regards
--
gdmgreeter hangs
https://bugs.launchpad.net/bugs/68136
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists
Public bug reported:
Binary package hint: avidemux
Hi,
I try to convert MPEG-2 recordings taken from DVB-T and DVB-C to
MPEG-4(avi).
avidemux seems the only availabe tool under ubuntu allowing to crop and modify
the input graphically and to convert. And indeed it seems to be a pretty good
too
Ubuntu version: 8.04
% apt-cache policy avidemux
avidemux:
Installiert:1:2.4.1-0.0ubuntu1
Mögliche Pakete:1:2.4.1-0.0ubuntu1
Versions-Tabelle:
*** 1:2.4.1-0.0ubuntu1 0
500 http://de.archive.ubuntu.com hardy/multiverse Packages
100 /var/lib/dpkg/status
--
video and audio ou
Public bug reported:
Binary package hint: ejabberd
Hi,
I am having some problems with ejabberd and jwchat,
ejabberd does not forward messages sent by jwchat and
sometimes issues a FORBIDDEN reply.
But I doubt that I still can get support for a version of ejabberd that is as
old as the ubunt
Public bug reported:
Binary package hint: synaptic
Hi,
that's a wish, not a bug:
Synaptic displays only the "Installed Version" and "Latest Version" in
the main window's package list. I basically gives the choice of to
upgrade or not to upgrade.
On the other hand, ubuntu has additional archiv
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/14985085/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/14985086/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/14985087/ProcStatus.txt
--
better
Bryce Harrington schrieb:
> Hi, it's been some time since we last heard from you - are you still
> interested in this bug? If so, it'd be great if you could re-test it
> against intrepid, and provide the info mentioned above. Otherwise,
> we'll close this as expired.
>
>
Well, I am still inte
Public bug reported:
Binary package hint: motv
Hi,
motv seems to be missing since intrepid. Maybe it was removed because it
seemed old-fashioned, but actually it was the best application to watch
and record DVB-T on a ubuntu machine...
regards
Hadmut
** Affects: motv (Ubuntu)
Importance:
Public bug reported:
Binary package hint: compiz
Hi,
after installation of 8.10 beta I encountered this problem:
When starting a gnome session /usr/bin/gnome-wm is started. This script
determines which window manager to run, in most cases compiz. Just
before launching, it sets the value
/deskt
Public bug reported:
Binary package hint: ubuntu-wallpapers
Hi,
just installed intrepid on two computes. Sorry, mates, although intrepid
is pretty good work, the new desktop background image is too ugly. The
colors, especially that green, looks horrible on some LCD screens.
regards
** Affects:
Public bug reported:
Binary package hint: xserver-xorg-video-ati
Hi,
I have a small Acer desktop PC (actually built mostly from notebook
technology), a
01:05.0 VGA compatible controller: ATI Technologies Inc RS690 [Radeon X1200
Series]
onboard graphics adapter and DVI and HDMI output.
The c
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/18199710/Xorg.0.log
--
Display scaling for HDMI
https://bugs.launchpad.net/bugs/277864
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubunt
Well, I could mostly fix the problems by using asoundconf to use the SB
sound output and blacklisting the sound driver for the internal speaker.
Meanwhile I upgraded the machine to intrepid beta and attached the
machine to a HDMI connected flat panel TV, and again have the problem
that the sound i
Public bug reported:
Binary package hint: gringotts
Hi,
gringotts 1.2.10~pre1-2 crashes immediately after starting with
segmentation fault on my intrepid beta AMD64 system.
Unfortunately I can't generate a trace of the crash, because if I strace
it, it works. So it might be a problem with the m
Public bug reported:
Hi,
I've a small Acer desktop (but with notebook ingredients) and a
01:05.0 VGA compatible controller: ATI Technologies Inc RS690 [Radeon
X1200 Series]
video controller. Ubuntu 8.04 in general works, I had to use the 2.6.27 kernel
from intrepid
to solve USB issues.
When
** Attachment added: "lspci -vvnn output"
http://launchpadlibrarian.net/17661005/lspci-vvnn
--
X11: unknown chip id 0x791e, can't guess.
https://bugs.launchpad.net/bugs/270979
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubun
Public bug reported:
Hi,
I have a small Acer desktop computer (made from notebook ingredients).
Ubuntu 8.04 works in general, but I had to use the intrepid 2.6.27
kernel to solve problems with the SB600 southbridge USB ports.
However, sound does not work properly. I do not get any sound on the
** Attachment added: "lspci -vvnn output"
http://launchpadlibrarian.net/17661063/lspci-vvnn
--
ALSA problems with SB600/X1200 sound: reduced mixer/internal sound
https://bugs.launchpad.net/bugs/270981
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscri
kklaine schrieb:
> I have this same issue. It happens when I try to use a USB device such
> as a flash drive or web cam. Using only a USB mouse everything's OK. I
> use an Acer Aspire desktop PC with an ATI SB600 USB Controller.
>
>
>
Pretty good hint. My USB hub is built into the LCD screen an
Luke Yelavich schrieb:
> Please have a read of https://wiki.ubuntu.com/DebuggingSoundProblems,
> and run the alsa-info script linked to that page. Then attach the output
> of alsa-info.sh to this bug report.
>
> Since you are using a much newer kernel version, and therefore a newer
> alsa driver ve
Public bug reported:
Binary package hint: linux-image-2.6.26-5-generic
Hi,
I just gave intrepid's 2.6.26 kernel package a try (using a hardy
system).
The kernel (still) lacks a driver for the Realtek R8101E Ethernet
controller, which is a pitty, since this chip is used in many new (and
cheap) n
Public bug reported:
Binary package hint: linux-image-2.6.26-5-generic
Hi,
I just tried the 2.6.26 kernel image from intrepid on a hardy system,
trying to get a better hardware support.
Hardy's X11 does not work on that particular computer with the new
kernel. It's a toshiba notebook with a Int
Public bug reported:
Binary package hint: dhcp3-client
Hi,
strange problem: On my notebook computer with WLAN I can't get DHCP
addresses.
Trace of the problem:
dhclient3 properly receives an IP address from the server.
dhclient3 then calls /sbin/dhclient-script to actually perform the
config
Public bug reported:
Binary package hint: otrs2
Please update to the latest version of otrs2. We have some problems with
the current ubuntu's version and it does not make sense to report bugs
in an outdated version to the upstream authors.
regards
** Affects: otrs2 (Ubuntu)
Importance: Und
Public bug reported:
Binary package hint: installation-guide-amd64
Hi,
I just replaced the mainboard of a computer with ubuntu hardy, put in a
brandnew board with an AMD X2 CPU and 4 GByte RAM.
Unfortunately, the standard ubuntu kernel (*-generic) detects only 3 of
the 4 GByte RAM.
I therefor
Hi,
this bug also drives me into serious problems, crashing tcsh and others.
Since LDAP is a standard service today and 8.04 is claimed to have Long Term
Support,
this bug really and urgently needs to be addressed. Most modern production
networks
do use LDAP.
regards
--
libnss-ldapd nslcd
Allegedly there's a patch at
https://bugzilla.redhat.com/show_bug.cgi?id=432280
regards
--
realtek 8189 wireless internal usb doesn't work
https://bugs.launchpad.net/bugs/190266
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubunt
Public bug reported:
Binary package hint: bugzilla
Hi,
bugzilla requires several perl modules, some are optional.
Some of these modules are available as debian/ubuntu packages, but
unfortunately do not get installed automatically. Would be nice to have
dependencies to pull these modules in auto
Public bug reported:
Binary package hint: bugzilla
Hi,
several bugs and missing functions were fixed in later versions of
bugzilla.
Please update the ubuntu/debian package to the latest stable (3.0.4)
regards
** Affects: bugzilla (Ubuntu)
Importance: Undecided
Status: New
--
b
Public bug reported:
Binary package hint: evince
Hi,
I am writing letters with latex and the KOMA scrlttr2 package. While
other programs like kdvi display the dvi files correctly, evince cuts
away the top of the page with the letter head. See the attached dvi file
and compare with kdvi output.
** Attachment added: "example dvi file"
http://launchpadlibrarian.net/20803780/briefmuster.dvi
--
evince shows A4 dvi files in wrong format
https://bugs.launchpad.net/bugs/312318
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ub
That's how it looks on my screen with "BestFit". When playing around
with the zoom factor, I sometimes get the full header (e.g. with 125%),
sometimes only parts.
** Attachment added: "evince_hadmut1.png"
http://launchpadlibrarian.net/20833935/evince_hadmut1.png
--
evince shows A4 dvi files i
Have a look at this (zoom 50%): There's just half of the header, and
only " o n oe" of John Doe, i.e. only those characters are printed,
that fit into the box.
regards
** Attachment added: "evince_hadmut2.png"
http://launchpadlibrarian.net/20833952/evince_hadmut2.png
--
evince shows A4 dv
Ah, and btw., I am using an AMD64 System. I just tried a notebook with
i386 Ubuntu, where I did not see that problem.
--
evince shows A4 dvi files in wrong format
https://bugs.launchpad.net/bugs/312318
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Public bug reported:
Binary package hint: googleearth-package
Hi,
when I use make-googleearth-package, I get lots of error messages of the
form:
dpkg-shlibdeps: warning: shared libs info file 'shlibs.local' line 7: bad line
'libcollada-1.4.so'
regards
** Affects: googleearth-package (Ubunt
Public bug reported:
Hi,
I have a HP LaserJet 1300. After installation, ubuntu by default chooses
the Foomatic/hpijs driver (marked as 'recommended'). Unfortunately, this
driver crops some millimeters of the letterhead if I print a letter
(made with latex) in european A4 format. The driver seems
Public bug reported:
Binary package hint: libxml-simple-ruby
Hi,
when running e.g. ruby on rails I get heaps of warnings:
/usr/lib/ruby/1.8/xmlsimple.rb:275: warning: already initialized constant
KNOWN_OPTIONS
/usr/lib/ruby/1.8/xmlsimple.rb:280: warning: already initialized constant
DEF_KEY_A
Hi,
even if you choose to not use the inetd, the package dependency enforces
an inetd to be installed. The dependency should be turned into a
recommendation.
regards
Hadmut
--
gwhois depends on inetd
https://bugs.launchpad.net/bugs/309803
You received this bug notification because you are a mem
> Is this a feasible solution?
Yup, seems OK.
regards
Hadmut
--
gwhois depends on inetd
https://bugs.launchpad.net/bugs/309803
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
h
Public bug reported:
Binary package hint: openoffice.org-impress
Hi,
seems as if bug #201005 was not fixed properly.
My Problem:
I am writing a presentation with four different master slides, where two
of them have (different) background images, set in master slide view
with Slide/Set Backgrou
Public bug reported:
Binary package hint: linux-image-2.6.27-9-generic
Hi,
I have a Toshiba Satellite Notebook which I sometimes use for
presentations with a beamer when giving talks. Recently I ran into
problems because I was not able to configure the external VGA port, the
external beamer/moni
** Attachment added: "xorg.conf"
http://launchpadlibrarian.net/21485255/xorg.conf
--
External VGA does not work with kernel 2.6.27-9 and GM965
https://bugs.launchpad.net/bugs/319389
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
** Attachment added: "lspci -vv"
http://launchpadlibrarian.net/21485252/lspci-vv
--
External VGA does not work with kernel 2.6.27-9 and GM965
https://bugs.launchpad.net/bugs/319389
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
1 - 100 of 1411 matches
Mail list logo
