I had those crashes at least one times a day when my player was
connected by WIFI. Even with a sheduled reboot every night.
Since I connected the player with LAN cable I didn't have any crash for
weeks even without sheduled rebooting. I'm glad that my piCorePlayer is
now running 24/7.
Greg Erskine wrote:
> It might be easier to use one of the other distributions or get another
> screen.
Thank you Greg. That's no way. I love pcp and the misbehaving of the
screen is a minor issue.
Code:
Is it possible that you are not using the correct resolution
paul- wrote:
> What do you mean it cannot be calibrated. The calibration is in the
> touchscreen library, not the screen.
Hi Paul,
this display cannot be calibrated. I have no idea how to influence any
touchscreen library. There is also existing a 5" resistive touchscreen
of Waveshare and in
paul- wrote:
> Have you calibrated the touch screen? The touch libraries used with
> jivelite are completely different Than Xorg use with a raspiOS desktop.
The capacitive touch screen
https://www.waveshare.com/wiki/5inch_HDMI_LCD_(H)
can't be calibrated. Only the resistive can.
Behaviour
paul- wrote:
> That's likely a compatibility issue with the Waveshare screen, you
> might try looking at the waveshare support. How does that screen
> connect?
The screen is connected via the first HDMI port of the Raspberry and for
touch functionality it is also connected by USB.
The
paul- wrote:
> GOing to need more information. Please describe your system hardware
> and configuration.
Hello Paul,
My system hardware is listed as a footnote below my posting:
Raspberry Pi 4B 2GB, Pimoroni On/Off Shim, Allo DigiOne, Khadas Tone
Board, Waveshare 5" Capacitive Touch
The dmesg log shows a couple of lines with an error. This only occurs in
pcp 7 and not in the former versions. Can someone tell what is causing
this error?
Code:
[ 11.833035] Starting piCorePlayer v7.0.1 startup.
[ 11.875512] random: crng init done
[
marc wrote:
> Dear experts,
>
> I would appreciate your advice regarding the *system time* of
> piCorePlayer.
> My setup:
> Raspberry Pi 4 Modell B 4GB
> piCorePlayer v7.0.0 64 Bit
> LMS 8.1.x
>
> I noticed that the Squeezebox Classic showed an incorrect time by 2
> minutes. When I
Howard Passman wrote:
> I hate to ask, but have you checked your power supply? I have two
> server/players running all the time at home and one running in the car
> that gets the power pulled every time I shut the car off. All three run
> great. Using pi4, piCorePlayer 7.0.1, the current
slartibartfast wrote:
> I just had pCP crash while playing. At least I assume it did as it
> disappeared from my player list. The pCP web page said squeezelite was
> running. Restarting squeezelite didn't work and squeezelite was then
> reported as not running. Only a reboot restored the
Howard Passman wrote:
> I'm under the impression that you can have at least 2 drives for music
> storage. Are there any caveats to that? Can I have 500GB USB drive and a
> 250GB USB drive?
>
> Thanks,
>
> Howard
I have 2 USB SSD drives with music connected via USB-Hub. Each has 1 TB.
This
Grumpy Bob wrote:
> I'm using a power off shim but with different GPIO assignments:
>
> 33208
>
> Works fine for me, I've also wired in a separate illuminated momentary
> switch on the case. This is with pCP 7.
>
> Robert
I didn't use GPIO4 because Allo DigiOne seems to use it. Since that I
I have also an issue with the power overlays in piCorePlayer 7. I use
the Pimoroni on/off-shim and when I push the button to drive the system
down it is driving down but not cuts the power to the pi completely. I
didn't have this in Version 6.1. There the power was successfully cut
completely
I have piCorePlayer installed on Raspberry Pi 4 and the video output
appears on hdmi0. Is there a way to have it on hdmi1, the second hdmi
connector of the Raspberry Pi 4?
Thanks for any advise
Clausi's Profile:
Found it :) Thank you Greg!
Clausi's Profile: http://forums.slimdevices.com/member.php?userid=69940
View this thread: http://forums.slimdevices.com/showthread.php?t=111787
___
Greg Erskine wrote:
> It's an overlay not an extension.
>
>
Hello Greg,
seems that I have a lack of basic knowledge. Could you please tell me,
where I can find this overlay?
Clausi's Profile:
Hi Greg,
thank vou very much. I checked what you mentioned. In the extension
repository I didn't find any extension for fan control at the first
view. It is a rather large list and if the name of the extension doesn't
indicate the topic of fan control, it is hard to find. Anyway, I'm lucky
with
paul- wrote:
> First you need to figure out what was broken in the backup. Did you add
> something to /opt/.filetool.lst.
>
> Take a look in the web interface | Diagnostics.
>
> it will show you the contents of /opt/.filetool.lst and the backup
> itself.
>
>
>
> Then to start something
paul- wrote:
> Is your sd card partition full? Were you doing anything via ssh?
df -h shows:
mmcblk0p1 size 63M used 43.9M
mmcblk0p2 size 1.9G used 564.8M
In fact I did several things via ssh. I installed python3.6.tcz,
python3.6.dev.tcz and RPi-GPIO-python3.6.tcz and I wrote a python
When I try to do a backup I get the following message:
32279
What is wrong?
+---+
|Filename: Unbenannt.JPG|
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=32279|
In the meantime I found the solution by myself. If a radio station is
already playing and than e.g. by click on the heart added to the
presets, the antenna is shown. If the radio station is added from the
search listing to the presets it is there with all the artwork and the
URL is in the form
After deleting my music library for a complete refresh my piCorePlayer
installation didn't run correctly anymore. So I did a complete new
install of piCorePlayer 6.1.0 with LMS 8.0.0. I now have the following
issue:
When I save a radio station in my preferences, there is shown neither a
Tony T wrote:
> Ok, probably not the right place to ask this, but
> I have a Pi4, and have attached a USB 3.0 hard drive that is powered by
> the Pi
> Now, all is working fine with 2.0 port, but if I plug the drive into the
> 3.0 port it will disconnect (or not mount at all)
> Im fine with
I prefer to do a backup of the sd card instead of saving different files
and copy them to a new installation. I tried this with Clonezilla, which
was not successful. Somehow it can't restore the partitions on a new sd
card. Also tried under Windows with win 32 disk imager. Problem there
was that
Thank you Paul, I'll check this on the next weekend since it's a very
long thread. I've been also in contact to Waveshare and perhaps they
have any ideas too. From my knowledge now, only the resistive touch
screen can be calibrated and not the capacitive, but will check.
Anyway, I love
coyrls wrote:
> This one works for me:
> https://www.amazon.co.uk/gp/product/B07NYN9PL6/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8=1
>
> It says it uses the "ASM1153E chip".
>
>
I bought this one now and it works fine on USB 3.0 via the Exsys USB 3.1
Hub. No more problems during boot.
I
carsten_h wrote:
> I have here a SATA M.2 SSD in an USB 3.1 and also in another USB 3.0
> enclosure which is not running with piCorePlayer on a Pi 4B. It takes
> minutes to mount the drive.
> I have a 2,5" SATA SSD in an USB 3.0 enclusure which is running without
> any problems with
I would like to come back to my posting #60.
After a reboot time (hour, minute) was not anymore there and boot took a
very long time as before. So the change of time server to my local
Fritzbox did not have the positive effect as I thougt before.
After some tests I found out the following: The
Thank you very much for the advise. Didn´t know this section of the
setup.
I changed the time server to my local Fritzbox and now everything is
going fine. Bootup is much faster, even with the USB sda1 mount and my
Squeezebox Radio shows the time in standby mode now. I don´t why this
is working
Thank you paul-
I checked several threads and watched the dmesg but didn't find out
where the time server is set and how to check if connection to the
timeserver is possible. The bottom row of the web frontend is
"piCorePlayer | piCorePlayer v6.0.0 | www v0005 | linux
4.19.105-pcpCore_v8 |
I have a Squeezebox Radio, which is connected to the LMS of my
piCorePlayer by WIFI. In the setup it´s told to show a clock when in
standby mode (switched off by off-button). Since I´m running the
piCorePlayer setup the display is black without showing the clock.
Before I used max2play and I
31 matches
Mail list logo