Tried an in-situ upgrade from v5.0.1 to 6.0.0.
Unable to connect afterwards. I was using wireless.
Similar experience here, but coming from 6.0.0-rc1. WLAN wouldn't connect.
I then plugged in a keyboard and double checked
/usr/local/etc/pcp/wpa_supplicant.conf - which was there and IMHO
As some problems go away a few days after testing, I tested the Pi3B+
with 6.0.0 again. It is still rebooting suddenly when playing
something.
Is there some possibility to find the reason for a sudden reboot?
Will it be better to make a whole new installation of 6.0.0 an not use
the insitu
paul- wrote:
> You can try to manually pull down copies of the extensions that it was
> complaining about. 5 and 6 use the same repo but some extensions
> have been updated.
My issue (mount not working) appeared to be the result of there being an
incompatibility between libmount and
carsten_h wrote:
> I found that I can set the mirror repo on the bottom of the page. But I
> am still getting this:
> >
Code:
> > Error retreiving
http://picoreplayer.sourceforge.net/tcz_repo/10.x/armv7/tcz/pcp-jivelite_hdskins.tcz
> Checking MD5 of:
Perhaps the Hyperpixel's are best considered for controllers. I picked
up the 3.5 version a while back, but came to the conclusion that I
didn't want to give up my HiFiBerry's and pHat DAC's. Works great for
controller/display only.
paul- wrote:
> are you sure you have not run out of space on your disk?
Yes, there are 112.5MB free:
Code:
FilesystemSize Used Available Use% Mounted on
/dev/mmcblk0p2 192.0M 70.8M112.5M 39% /mnt/mmcblk0p2
Man, am I behind the times!. I have two version 4 picore lms on 3B+'s,
one home and one is in a currently closed cabin, and have deployed 2
additional similar units to friends who are not in the area. All use a
USB HDD for the library. The hardware is identical. The file structure
of the HDD is
Where was the fix Ralphy? in the piCorePlayer applet.
I'm using lcd-brightness for other screens.I just pulled a copy from
the 240x240 skin package.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
paul- wrote:
> Where was the fix Ralphy? in the piCorePlayer applet.
>
> I'm using lcd-brightness for other screens.I just pulled a copy from
> the 240x240 skin package.
In the ScreenSaver jivelite applet.
Ralphy
*1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio
'Squeezebox client
No did not succeed with the update. Had to make a fresh install. However
spent alot of time making adjustements to the squeezelite settings to
make things work. What would work fine with v5.0.0 would not start with
v6.0.0.. Found an overlay that seems to work for my dac including
352/384 khz
I've updated the pcp jivelite extension to fix an issue with the When
Off screensaver using power off/on from another controller for the
pirate audio board.
Previously, if the PA was off, and the screen brightness set to 0, when
you pressed the power button, the screen would turn on for about 1
Redrum wrote:
> Is there any reason that I can't prepare and test 4 new Micro SD's with
> version 6 on my local 3B+, then, just deploy the cards to other systems?
> Plug and play so to speak?
> /QUOTE]
>
> If all the hardware is the same, that should work just fine.
piCorePlayer a small
paul- wrote:
> We just maintain a board revision table. Its mainly for board
> diagnostics and a few functions rely on knowing the board. We could
> read it all from device tree, but the table is just easier to manage.
Perfectly understandable.
To my best knowledge :
- nothing has changed
That seems real odd Michael, as the update really doesn't turn much off,
and just replaces the initial extensions. Its real difficult to test
upgrades from every different situation. But a wifi upgrade is for sure
tested.. heck I just updated a 4.1 install (I had to make a
little
carsten_h wrote:
> I have the same problem. Now I am trying to find out where to set the
> mirror repo.
I found that I can set the mirror repo on the bottom of the page. But I
am still getting this:
Code:
Error retreiving
StM wrote:
> Is it just me or is there a problem with the pcp-jivelite_hdskins.tcz
> file?
> md5sum of the downloaded file is ff34fb5f141b59ea522264c0569bfab9
> pcp-jivelite_hdskins.tcz.md5.txt says it should be
> 363f701de0b03b3feb77850ebec14d5f so at the moment I cannot install
> Jivelite.
>
Great work! Upgrade 4 PCP's in situ. All working fine. Wish all update
were as smooth :D
One of my player is a Audiophonics Rasptouch. This has an on/off button
that needs a script to work: audiophonics-powerscript.tcz
That was in the repositories of the V5 but I can not find in the 6.0.0
lencoth wrote:
> Great work! Upgraded 4 PCP's in situ. All working fine. Wish all update
> were as smooth :D
>
> One of my player is a Audiophonics Rasptouch. This has an on/off button
> that needs a script to work: audiophonics-powerscript.tcz
>
> That was in the repositories of the 5 but I
mherger wrote:
> >
>
> One more (potentitally important?) detail: the in-situ update didn't
> really work at first. It went through all the necessary steps, but then
>
> ended on the "Ok" message, without offering me to reboot. I re-run the
> update a second time (without re-booting), and
paul- wrote:
> Press the Card Config button on the Squeezelite page. The hifiberry
> doesn't have many mixer options..
It's always easy when it's explained!
Thanks Paul
Peter2's Profile:
20 matches
Mail list logo
