No session recording - OM 6.10
Hello, How is session recording done? I have clicked the button in the top-right corner, and Actions > Share/Record Screen, but nothing seems to happen. There are no recordings in the list. Thanks.
Re: No session recording - OM 6.10
Yes. Here's a screenshot: [image: image.png] On Tue, Aug 24, 2021 at 2:43 AM Maxim Solodovnik wrote: > Hello Lee, > > Can you try to click the "About" link at the Dashboard? > Can you see the "About" dialog? > > @All if you can reproduce the issue with dialog don't popping up, can you > share the steps with me? > Or VM if the issue is reproducible in VM? > > > On Mon, 23 Aug 2021 at 23:34, Alvaro wrote: > >> Hi Lee, >> >> Just checked OM 6.1.0 on Debian 10 and that >> point works as expected. >> >> Could you please indicate where is the browser >> client, Lan or Internet? >> >> >> >> >> >> On Mon, 23 Aug 2021 14:30:23 + >> Lee But wrote: >> >> > Hello Ali, >> > Thanks for your suggestions. >> > Nothing happens when I click that icon. I've tried on Chromium and >> Firefox, >> > so I don't think it's a browser problem. >> > I followed the installation tutorial for Debian 10 server by Alvaro >> Bustos. >> > >> > Regards, >> > Lee >> > >> > >> > On Mon, Aug 23, 2021 at 12:26 PM Ali Alhaidary < >> ali.alhaid...@the5stars.org> >> > wrote: >> > >> > > Hi Lee, >> > > >> > > When you press the little computer icon at the upper right cornet, the >> > > record/share dialog box should appear, from this box you can select >> either >> > > to record, or to share, in both cases, the browser will pop another >> box >> > > asking for mic/camera permission, that you should give, then ask you >> which >> > > window you want to record/share. >> > > >> > > Ali >> > > On 8/23/21 1:49 PM, Lee But wrote: >> > > >> > > Hello Ali, >> > > When I press the screen sharing button or the option from the Actions >> > > menu, there is nothing to indicate that the screen is being shared or >> > > recorded. >> > > I don't see anything on the interface to stop any recording, either. >> There >> > > is a spinner that spins for a short time (shown above the users pane >> in the >> > > image below), but nothing is visually indicated after that. >> > > The 'Activities and actions' panel doesn't log anything. >> > > There is nothing in the Recordings area from my dashboard. >> > > >> > > [image: image.png] >> > > >> > > Recording is enabled: >> > > [image: image.png] >> > > >> > > >> > > On Mon, Aug 23, 2021 at 8:33 AM Ali Alhaidary < >> ali.alhaid...@the5stars.org> >> > > wrote: >> > > >> > >> Hi, >> > >> >> > >> Didi you stop the recording? Did the recording show in the recording >> > >> list processing? >> > >> >> > >> Ali >> > >> >> > >> On 8/23/21 8:49 AM, Lee But wrote: >> > >> > Hello, >> > >> > >> > >> > How is session recording done? >> > >> > I have clicked the button in the top-right corner, and Actions > >> > >> > Share/Record Screen, but nothing seems to happen. There are no >> > >> > recordings in the list. >> > >> > >> > >> > Thanks. >> > >> >> > > >> >> >> -- >> >> > > -- > Best regards, > Maxim >
Re: No session recording - OM 6.10
@Ali, I went to the room, but the share button does nothing using Firefox and Chromium. [image: image.png] Server: Debian 10 Kernel: 4.19.0 (Cannot upgrade - OpenVZ) CPU: AMD Opteron 4386 - 1 core RAM: 2GB guaranteed All packages relating to Openoffice were installed according to the user guide. Thanks, Lee. On Tue, Aug 24, 2021 at 7:35 AM Ali Alhaidary wrote: > Lee, > > Would you put your server/client environment in detail please. > > Ali > On 8/24/21 8:06 AM, Maxim Solodovnik wrote: > > I need someone who can reproduce the issue :( (was reported 3+ times > .) > Hopefully someone can help :) > > On Tue, 24 Aug 2021 at 11:18, Ali Alhaidary > wrote: > >> >> On 8/24/21 5:43 AM, Maxim Solodovnik wrote: >> >> Hello Lee, >> >> Can you try to click the "About" link at the Dashboard? >> Can you see the "About" dialog? >> >> @All if you can reproduce the issue with dialog don't popping up, can you >> share the steps with me? >> >> @Max >> >> Things are working here as expected in production since 6.0.0 till now >> 7.0.0#13, no issue has been reported regarding this case. Reviewing our >> case database, similar issue was reported when some other dialog box from >> the browser was waiting a response and the teacher is trying to start >> recording and nothing happens (his claim). Is there any thing specific I >> can do? >> >> @Lee >> >> Can you please register as new user https://the5stars.org and then >> access >> https://school.the5stars.org/class/mod/openmeetings/view.php?id=181 from >> the same browsers. >> >> Or VM if the issue is reproducible in VM? >> >> >> On Mon, 23 Aug 2021 at 23:34, Alvaro wrote: >> >>> Hi Lee, >>> >>> Just checked OM 6.1.0 on Debian 10 and that >>> point works as expected. >>> >>> Could you please indicate where is the browser >>> client, Lan or Internet? >>> >>> >>> >>> >>> >>> On Mon, 23 Aug 2021 14:30:23 + >>> Lee But wrote: >>> >>> > Hello Ali, >>> > Thanks for your suggestions. >>> > Nothing happens when I click that icon. I've tried on Chromium and >>> Firefox, >>> > so I don't think it's a browser problem. >>> > I followed the installation tutorial for Debian 10 server by Alvaro >>> Bustos. >>> > >>> > Regards, >>> > Lee >>> > >>> > >>> > On Mon, Aug 23, 2021 at 12:26 PM Ali Alhaidary < >>> ali.alhaid...@the5stars.org> >>> > wrote: >>> > >>> > > Hi Lee, >>> > > >>> > > When you press the little computer icon at the upper right cornet, >>> the >>> > > record/share dialog box should appear, from this box you can select >>> either >>> > > to record, or to share, in both cases, the browser will pop another >>> box >>> > > asking for mic/camera permission, that you should give, then ask you >>> which >>> > > window you want to record/share. >>> > > >>> > > Ali >>> > > On 8/23/21 1:49 PM, Lee But wrote: >>> > > >>> > > Hello Ali, >>> > > When I press the screen sharing button or the option from the Actions >>> > > menu, there is nothing to indicate that the screen is being shared or >>> > > recorded. >>> > > I don't see anything on the interface to stop any recording, either. >>> There >>> > > is a spinner that spins for a short time (shown above the users pane >>> in the >>> > > image below), but nothing is visually indicated after that. >>> > > The 'Activities and actions' panel doesn't log anything. >>> > > There is nothing in the Recordings area from my dashboard. >>> > > >>> > > [image: image.png] >>> > > >>> > > Recording is enabled: >>> > > [image: image.png] >>> > > >>> > > >>> > > On Mon, Aug 23, 2021 at 8:33 AM Ali Alhaidary < >>> ali.alhaid...@the5stars.org> >>> > > wrote: >>> > > >>> > >> Hi, >>> > >> >>> > >> Didi you stop the recording? Did the recording show in the recording >>> > >> list processing? >>> > >> >>> > >> Ali >>> > >> >>> > >> On 8/23/21 8:49 AM, Lee But wrote: >>> > >> > Hello, >>> > >> > >>> > >> > How is session recording done? >>> > >> > I have clicked the button in the top-right corner, and Actions > >>> > >> > Share/Record Screen, but nothing seems to happen. There are no >>> > >> > recordings in the list. >>> > >> > >>> > >> > Thanks. >>> > >> >>> > > >>> >>> >>> -- >>> >>> >> >> -- >> Best regards, >> Maxim >> >> > > -- > Best regards, > Maxim > >
iptables rule stops tomcat/catalina
Hello, I've applied the various iptables rules as per the installation guide and VPS securing (see attached iptables.txt file), while docker has added many 'chains' I don't understand. iptables is new to me. Everything works until I apply the rule iptables -A INPUT -j DROP After that, tomcat/catalina does not start. I have these commands in a bash script: sudo /etc/init.d/mysql restart sudo /etc/init.d/coturn restart sudo /etc/init.d/docker restart sudo docker restart kms sudo /etc/init.d/tomcat34 restart This is what I see this in the terminal: NOTE: Picked up JDK_JAVA_OPTIONS: --add-opens=java.base/java.lang=ALL-UNNAMED --add-opens=java.base/java.io=ALL-UNNAMED --add-opens=java.base/java.util=ALL-UNNAMED --add-opens=java.base/java.util.concurrent=ALL-UNNAMED --add-opens=java.rmi/sun.rmi.transport=ALL-UNNAMED Aug 24, 2021 10:23:35 PM org.apache.catalina.startup.Catalina stopServer SEVERE: Could not contact [localhost:8005] (base port [8005] and offset [0]). Tomcat may not be running. Aug 24, 2021 10:23:35 PM org.apache.catalina.startup.Catalina stopServer SEVERE: Error stopping Catalina java.net.ConnectException: Connection timed out (Connection timed out) at java.base/java.net.PlainSocketImpl.socketConnect(Native Method) at java.base/java.net.AbstractPlainSocketImpl.doConnect(AbstractPlainSocketImpl.java:399) at java.base/java.net.AbstractPlainSocketImpl.connectToAddress(AbstractPlainSocketImpl.java:242) at java.base/java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:224) at java.base/java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392) at java.base/java.net.Socket.connect(Socket.java:609) at java.base/java.net.Socket.connect(Socket.java:558) at java.base/java.net.Socket.(Socket.java:454) at java.base/java.net.Socket.(Socket.java:231) at org.apache.catalina.startup.Catalina.stopServer(Catalina.java:667) at java.base/jdk.internal.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at java.base/jdk.internal.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62) at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.base/java.lang.reflect.Method.invoke(Method.java:566) at org.apache.catalina.startup.Bootstrap.stopServer(Bootstrap.java:391) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:481) I have attached the iptables configuration in a text file. Do I need to open port 8005 as well? Thank you all, Lee Chain INPUT (policy ACCEPT 3113 packets, 1161K bytes) pkts bytes target prot opt in out source destination 48060 37M ACCEPT tcp -- anyany anywhere anywhere tcp dpt:5443 5008 358K ACCEPT tcp -- anyany anywhere anywhere tcp dpt: 0 0 ACCEPT tcp -- anyany anywhere anywhere tcp dpt:3478 8694 8287K ACCEPT udp -- anyany anywhere anywhere udp dpt:3478 0 0 ACCEPT tcp -- anyany anywhere anywhere tcp dpt:5443 0 0 ACCEPT tcp -- anyany anywhere anywhere tcp dpt: 521 72169 ACCEPT udp -- anyany anywhere anywhere multiport dports 49152:65535 16693 2391K ACCEPT tcp -- anyany anywhere anywhere tcp dpt:webmin 64 3664 ACCEPT tcp -- anyany anywhere anywhere tcp dpt:domain 380 27914 ACCEPT udp -- anyany anywhere anywhere udp dpt:domain 350 23871 ACCEPT tcp -- anyany anywhere anywhere tcp dpt:http 7707 547K ACCEPT tcp -- anyany anywhere anywhere tcp dpt:5824 882 93614 ACCEPT tcp -- anyany anywhere anywhere tcp dpt:https Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 DOCKER-USER all -- anyany anywhere anywhere 0 0 DOCKER-ISOLATION-STAGE-1 all -- anyany anywhere anywhere 0 0 ACCEPT all -- anydocker0 anywhere anywhere ctstate RELATED,ESTABLISHED 0 0 DOCKER all -- anydocker0 anywhere anywhere 0 0 ACCEPT all -- docker0 !docker0 anywhere anywhere 0 0 ACCEPT all -- docker0 docker0 anywhere anywhere Chain OUTPUT (policy ACCEPT 5288 packets, 4080K bytes) pkts bytes target prot opt in out source destination 1060 403K ACCEPT udp -- anyany anywhere anywhere udp dpts:49152:65535 Chain DOCKER (1 references
Registering on behalf of users - no confirmation email
Hello, I turned off self-registering, and when I set up a user as admin, no verification email is sent despite the key being set to true. [image: image.png] Also, the email that contains the user's account details does not contain the password, nor a link to the openmeetings page, so they cannot log in. Here's the message: [image: image.png] Thank you, Lee
Re: No session recording - OM 6.10
Thank you for your help. We have worked out that the problem is likely with my computer setup and not a server problem. @ali, thank you very much for your help with troubleshooting. All the best, Lee On Tue, Aug 24, 2021 at 9:11 AM Ali Alhaidary wrote: > @Lee, try now please. > > Ali > On 8/24/21 12:09 PM, Lee But wrote: > > @Ali, I went to the room, but the share button does nothing using Firefox > and Chromium. > [image: image.png] > > Server: Debian 10 > Kernel: 4.19.0 (Cannot upgrade - OpenVZ) > CPU: AMD Opteron 4386 - 1 core > RAM: 2GB guaranteed > > All packages relating to Openoffice were installed according to the user > guide. > > Thanks, > Lee. > > > On Tue, Aug 24, 2021 at 7:35 AM Ali Alhaidary > wrote: > >> Lee, >> >> Would you put your server/client environment in detail please. >> >> Ali >> On 8/24/21 8:06 AM, Maxim Solodovnik wrote: >> >> I need someone who can reproduce the issue :( (was reported 3+ times >> .) >> Hopefully someone can help :) >> >> On Tue, 24 Aug 2021 at 11:18, Ali Alhaidary >> wrote: >> >>> >>> On 8/24/21 5:43 AM, Maxim Solodovnik wrote: >>> >>> Hello Lee, >>> >>> Can you try to click the "About" link at the Dashboard? >>> Can you see the "About" dialog? >>> >>> @All if you can reproduce the issue with dialog don't popping up, can >>> you share the steps with me? >>> >>> @Max >>> >>> Things are working here as expected in production since 6.0.0 till now >>> 7.0.0#13, no issue has been reported regarding this case. Reviewing our >>> case database, similar issue was reported when some other dialog box from >>> the browser was waiting a response and the teacher is trying to start >>> recording and nothing happens (his claim). Is there any thing specific I >>> can do? >>> >>> @Lee >>> >>> Can you please register as new user https://the5stars.org and then >>> access >>> https://school.the5stars.org/class/mod/openmeetings/view.php?id=181 >>> from the same browsers. >>> >>> Or VM if the issue is reproducible in VM? >>> >>> >>> On Mon, 23 Aug 2021 at 23:34, Alvaro wrote: >>> >>>> Hi Lee, >>>> >>>> Just checked OM 6.1.0 on Debian 10 and that >>>> point works as expected. >>>> >>>> Could you please indicate where is the browser >>>> client, Lan or Internet? >>>> >>>> >>>> >>>> >>>> >>>> On Mon, 23 Aug 2021 14:30:23 + >>>> Lee But wrote: >>>> >>>> > Hello Ali, >>>> > Thanks for your suggestions. >>>> > Nothing happens when I click that icon. I've tried on Chromium and >>>> Firefox, >>>> > so I don't think it's a browser problem. >>>> > I followed the installation tutorial for Debian 10 server by Alvaro >>>> Bustos. >>>> > >>>> > Regards, >>>> > Lee >>>> > >>>> > >>>> > On Mon, Aug 23, 2021 at 12:26 PM Ali Alhaidary < >>>> ali.alhaid...@the5stars.org> >>>> > wrote: >>>> > >>>> > > Hi Lee, >>>> > > >>>> > > When you press the little computer icon at the upper right cornet, >>>> the >>>> > > record/share dialog box should appear, from this box you can select >>>> either >>>> > > to record, or to share, in both cases, the browser will pop another >>>> box >>>> > > asking for mic/camera permission, that you should give, then ask >>>> you which >>>> > > window you want to record/share. >>>> > > >>>> > > Ali >>>> > > On 8/23/21 1:49 PM, Lee But wrote: >>>> > > >>>> > > Hello Ali, >>>> > > When I press the screen sharing button or the option from the >>>> Actions >>>> > > menu, there is nothing to indicate that the screen is being shared >>>> or >>>> > > recorded. >>>> > > I don't see anything on the interface to stop any recording, >>>> either. There >>>> > > is a spinner that spins for a short time (shown above the users >>>> pane in the >>>> > > image below), but nothing is visually indicated after that. >>>> > > The 'Activities and actions' panel doesn't log anything. >>>> > > There is nothing in the Recordings area from my dashboard. >>>> > > >>>> > > [image: image.png] >>>> > > >>>> > > Recording is enabled: >>>> > > [image: image.png] >>>> > > >>>> > > >>>> > > On Mon, Aug 23, 2021 at 8:33 AM Ali Alhaidary < >>>> ali.alhaid...@the5stars.org> >>>> > > wrote: >>>> > > >>>> > >> Hi, >>>> > >> >>>> > >> Didi you stop the recording? Did the recording show in the >>>> recording >>>> > >> list processing? >>>> > >> >>>> > >> Ali >>>> > >> >>>> > >> On 8/23/21 8:49 AM, Lee But wrote: >>>> > >> > Hello, >>>> > >> > >>>> > >> > How is session recording done? >>>> > >> > I have clicked the button in the top-right corner, and Actions > >>>> > >> > Share/Record Screen, but nothing seems to happen. There are no >>>> > >> > recordings in the list. >>>> > >> > >>>> > >> > Thanks. >>>> > >> >>>> > > >>>> >>>> >>>> -- >>>> >>>> >>> >>> -- >>> Best regards, >>> Maxim >>> >>> >> >> -- >> Best regards, >> Maxim >> >>
Re: No session recording - OM 6.10
I installed Opera browser, which worked. Then I thought it could be browser extensions on the other browsers. I disabled them one at a time. When I disabled ublockOrigin, it worked. I'm not sure what ublockOrigin is doing. Something simple in the end. On Tue, Aug 24, 2021 at 10:34 AM Ali Alhaidary wrote: > The good news is that OM is working very good on Harmony as well :-) > > Ali > On 8/24/21 1:32 PM, Ali Alhaidary wrote: > > @Lee, you are more than welcome, just keep us posted of the reason and > resolution. > > Ali > On 8/24/21 1:26 PM, Lee But wrote: > > Thank you for your help. > We have worked out that the problem is likely with my computer setup and > not a server problem. > @ali, thank you very much for your help with troubleshooting. > > All the best, > Lee > > On Tue, Aug 24, 2021 at 9:11 AM Ali Alhaidary > wrote: > >> @Lee, try now please. >> >> Ali >> On 8/24/21 12:09 PM, Lee But wrote: >> >> @Ali, I went to the room, but the share button does nothing using Firefox >> and Chromium. >> [image: image.png] >> >> Server: Debian 10 >> Kernel: 4.19.0 (Cannot upgrade - OpenVZ) >> CPU: AMD Opteron 4386 - 1 core >> RAM: 2GB guaranteed >> >> All packages relating to Openoffice were installed according to the user >> guide. >> >> Thanks, >> Lee. >> >> >> On Tue, Aug 24, 2021 at 7:35 AM Ali Alhaidary < >> ali.alhaid...@the5stars.org> wrote: >> >>> Lee, >>> >>> Would you put your server/client environment in detail please. >>> >>> Ali >>> On 8/24/21 8:06 AM, Maxim Solodovnik wrote: >>> >>> I need someone who can reproduce the issue :( (was reported 3+ times >>> .) >>> Hopefully someone can help :) >>> >>> On Tue, 24 Aug 2021 at 11:18, Ali Alhaidary >>> wrote: >>> >>>> >>>> On 8/24/21 5:43 AM, Maxim Solodovnik wrote: >>>> >>>> Hello Lee, >>>> >>>> Can you try to click the "About" link at the Dashboard? >>>> Can you see the "About" dialog? >>>> >>>> @All if you can reproduce the issue with dialog don't popping up, can >>>> you share the steps with me? >>>> >>>> @Max >>>> >>>> Things are working here as expected in production since 6.0.0 till now >>>> 7.0.0#13, no issue has been reported regarding this case. Reviewing our >>>> case database, similar issue was reported when some other dialog box from >>>> the browser was waiting a response and the teacher is trying to start >>>> recording and nothing happens (his claim). Is there any thing specific I >>>> can do? >>>> >>>> @Lee >>>> >>>> Can you please register as new user https://the5stars.org and then >>>> access >>>> https://school.the5stars.org/class/mod/openmeetings/view.php?id=181 >>>> from the same browsers. >>>> >>>> Or VM if the issue is reproducible in VM? >>>> >>>> >>>> On Mon, 23 Aug 2021 at 23:34, Alvaro wrote: >>>> >>>>> Hi Lee, >>>>> >>>>> Just checked OM 6.1.0 on Debian 10 and that >>>>> point works as expected. >>>>> >>>>> Could you please indicate where is the browser >>>>> client, Lan or Internet? >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> On Mon, 23 Aug 2021 14:30:23 + >>>>> Lee But wrote: >>>>> >>>>> > Hello Ali, >>>>> > Thanks for your suggestions. >>>>> > Nothing happens when I click that icon. I've tried on Chromium and >>>>> Firefox, >>>>> > so I don't think it's a browser problem. >>>>> > I followed the installation tutorial for Debian 10 server by Alvaro >>>>> Bustos. >>>>> > >>>>> > Regards, >>>>> > Lee >>>>> > >>>>> > >>>>> > On Mon, Aug 23, 2021 at 12:26 PM Ali Alhaidary < >>>>> ali.alhaid...@the5stars.org> >>>>> > wrote: >>>>> > >>>>> > > Hi Lee, >>>>> > > >>>>> > > When you press the little computer icon at the upper right cornet, >>>>> the >>>>> > > record/share dial
Re: How to change email templates?
Hello, I amended the RegisterUserTemplate.html file (see below), but when I added a user I was greeted by the "Something bad happen[ed]" screen. This wicket code is confusing me a bit because I don't really know where to put my amendments. First, I added the lines shown below inside the block, and then outside. Both failed. Follow this URL to login. If this is your first time logingg in, change your password first. https://www.otqhd.com:5443/openmeetings/;>Log in / Change password I amended the file after stopping all of the Om related servers. Thanks, Lee On Tue, Aug 31, 2021 at 8:04 AM Lee But wrote: > Okay. Thank you for the links. > > On Tue, Aug 31, 2021 at 5:07 AM seba.wag...@gmail.com < > seba.wag...@gmail.com> wrote: > >> Hi Lee, >> >> I think you should be able to follow this guide: >> https://openmeetings.apache.org/EditTemplates.html >> >> It leads you to those files (but on your local installation) >> https://github.com/apache/openmeetings/tree/master/openmeetings-service/src/main/java/org/apache/openmeetings/service/mail/template >> >> >> Which you can then edit and restart your local server. Just don't forget >> to back them up when you upgrade to a new version :) >> >> Thanks >> Seb >> >> Sebastian Wagner >> Director Arrakeen Solutions, OM-Hosting.com >> http://arrakeen-solutions.co.nz/ >> https://om-hosting.com - Cloud & Server Hosting for HTML5 >> Video-Conferencing OpenMeetings >> >> <https://www.youracclaim.com/badges/da4e8828-743d-4968-af6f-49033f10d60a/public_url> >> <https://www.youracclaim.com/badges/b7e709c6-aa87-4b02-9faf-099038475e36/public_url> >> >> >> On Tue, 31 Aug 2021 at 15:50, Lee But >> wrote: >> >>> Hello, >>> I'd like to change the account details e-mail template to include the >>> login page, as the current one does not provide a link for the user to log >>> in: >>> >>> [image: image.png] >>> Which template is that? I know nothing about wicket., so I don't know >>> where the text is pulled from. >>> >>> Thanks, >>> Lee. >>> >>>
Where is the privacy policy file, please?
Hello, I'd like to change the privacy policy page, but I cannot find where it is. I have looked in the folders under /opt/open610, the default folder as per tutorials. I do not use Google Spyware on my site, so I'd like to remove that part about Google. All the best, Lee
Re: Where is the privacy policy file, please?
Hello Ali, That's what I call Google Services, as generally that's what they are: spies. They track, and follow users around the internet often without the user's awareness, which is spying. Anyway. I've just found the privacy policy in the docs folder, so I can make the changes. I keep Google locked down as much as I can. I only use Gmail (via a VPN) because I don't want my personal email addresses publicly broadcast in a public user group. Regards, Lee On Sat, Aug 28, 2021 at 4:02 PM Ali Alhaidary wrote: > Hi, > > Where does it say 'Google Spyware' ? > > Ali > On 8/28/21 6:08 PM, Lee But wrote: > > Hello, > > I'd like to change the privacy policy page, but I cannot find where it is. > I have looked in the folders under /opt/open610, the default folder as > per tutorials. > > I do not use Google Spyware on my site, so I'd like to remove that part > about Google. > > All the best, > Lee > >
Re: How to change email templates?
I realised that I hadn't closed the block. Changing that template did nothing to what was emailed, so I don't know which template I need to amend. On Tue, Aug 31, 2021 at 2:56 PM Lee But wrote: > Hello, > > I amended the RegisterUserTemplate.html file (see below), but when I > added a user I was greeted by the "Something bad happen[ed]" screen. > This wicket code is confusing me a bit because I don't really know where > to put my amendments. First, I added the lines shown below inside the > block, and then outside. Both failed. > > > Follow this URL to login. If this is your first time logingg in, > change your password first. > https://www.otqhd.com:5443/openmeetings/;>Log in / > Change password > > > I amended the file after stopping all of the Om related servers. > > Thanks, > Lee > > On Tue, Aug 31, 2021 at 8:04 AM Lee But > wrote: > >> Okay. Thank you for the links. >> >> On Tue, Aug 31, 2021 at 5:07 AM seba.wag...@gmail.com < >> seba.wag...@gmail.com> wrote: >> >>> Hi Lee, >>> >>> I think you should be able to follow this guide: >>> https://openmeetings.apache.org/EditTemplates.html >>> >>> It leads you to those files (but on your local installation) >>> https://github.com/apache/openmeetings/tree/master/openmeetings-service/src/main/java/org/apache/openmeetings/service/mail/template >>> >>> >>> Which you can then edit and restart your local server. Just don't forget >>> to back them up when you upgrade to a new version :) >>> >>> Thanks >>> Seb >>> >>> Sebastian Wagner >>> Director Arrakeen Solutions, OM-Hosting.com >>> http://arrakeen-solutions.co.nz/ >>> https://om-hosting.com - Cloud & Server Hosting for HTML5 >>> Video-Conferencing OpenMeetings >>> >>> <https://www.youracclaim.com/badges/da4e8828-743d-4968-af6f-49033f10d60a/public_url> >>> <https://www.youracclaim.com/badges/b7e709c6-aa87-4b02-9faf-099038475e36/public_url> >>> >>> >>> On Tue, 31 Aug 2021 at 15:50, Lee But >>> wrote: >>> >>>> Hello, >>>> I'd like to change the account details e-mail template to include the >>>> login page, as the current one does not provide a link for the user to log >>>> in: >>>> >>>> [image: image.png] >>>> Which template is that? I know nothing about wicket., so I don't know >>>> where the text is pulled from. >>>> >>>> Thanks, >>>> Lee. >>>> >>>>
Re: How to change email templates?
Hello Sebastian, Thank you for your answers. Yes, I made a bash script to stop the servers that are mentioned in the installation tutorial from the openmeetings site: sudo /etc/init.d/mysql stop sudo /etc/init.d/coturn stop sudo /etc/init.d/docker stop sudo docker stop kms sudo /etc/init.d/tomcat34 stop This is the first time I've had a VPS, set it up and installed OpenMeetings on it, so I have no idea about how to change the ports in OM, nor which component determines the port. I just followed the tutorial, which I assumed was following best practices, since it is linked to from OpenMeetings. Regards, Lee On Tue, Aug 31, 2021 at 10:40 PM seba.wag...@gmail.com < seba.wag...@gmail.com> wrote: > Are you sure that you have stopped and restarted all servers before > changing the template ? > > Maybe just put in some other markup into this and other files and also in > other positions of the template. Until you find the one you want to edit. > > Also might be useful to move your installation from port 5443 to just > default https port (443). Some corporate firewalls do not allow traffic > other then standard ports. > > Thanks > Seb > > Sebastian Wagner > Director Arrakeen Solutions, OM-Hosting.com > http://arrakeen-solutions.co.nz/ > https://om-hosting.com - Cloud & Server Hosting for HTML5 > Video-Conferencing OpenMeetings > > <https://www.youracclaim.com/badges/da4e8828-743d-4968-af6f-49033f10d60a/public_url> > <https://www.youracclaim.com/badges/b7e709c6-aa87-4b02-9faf-099038475e36/public_url> > > > On Wed, 1 Sept 2021 at 03:21, Lee But > wrote: > >> I realised that I hadn't closed the block. >> Changing that template did nothing to what was emailed, so I don't know >> which template I need to amend. >> >> >> On Tue, Aug 31, 2021 at 2:56 PM Lee But >> wrote: >> >>> Hello, >>> >>> I amended the RegisterUserTemplate.html file (see below), but when I >>> added a user I was greeted by the "Something bad happen[ed]" screen. >>> This wicket code is confusing me a bit because I don't really know where >>> to put my amendments. First, I added the lines shown below inside the >>> block, and then outside. Both failed. >>> >>> >>> Follow this URL to login. If this is your first time logingg in, >>> change your password first. >>> https://www.otqhd.com:5443/openmeetings/;>Log in / >>> Change password >>> >>> >>> I amended the file after stopping all of the Om related servers. >>> >>> Thanks, >>> Lee >>> >>> On Tue, Aug 31, 2021 at 8:04 AM Lee But >>> wrote: >>> >>>> Okay. Thank you for the links. >>>> >>>> On Tue, Aug 31, 2021 at 5:07 AM seba.wag...@gmail.com < >>>> seba.wag...@gmail.com> wrote: >>>> >>>>> Hi Lee, >>>>> >>>>> I think you should be able to follow this guide: >>>>> https://openmeetings.apache.org/EditTemplates.html >>>>> >>>>> It leads you to those files (but on your local installation) >>>>> https://github.com/apache/openmeetings/tree/master/openmeetings-service/src/main/java/org/apache/openmeetings/service/mail/template >>>>> >>>>> >>>>> Which you can then edit and restart your local server. Just don't >>>>> forget to back them up when you upgrade to a new version :) >>>>> >>>>> Thanks >>>>> Seb >>>>> >>>>> Sebastian Wagner >>>>> Director Arrakeen Solutions, OM-Hosting.com >>>>> http://arrakeen-solutions.co.nz/ >>>>> https://om-hosting.com - Cloud & Server Hosting for HTML5 >>>>> Video-Conferencing OpenMeetings >>>>> >>>>> <https://www.youracclaim.com/badges/da4e8828-743d-4968-af6f-49033f10d60a/public_url> >>>>> <https://www.youracclaim.com/badges/b7e709c6-aa87-4b02-9faf-099038475e36/public_url> >>>>> >>>>> >>>>> On Tue, 31 Aug 2021 at 15:50, Lee But >>>>> wrote: >>>>> >>>>>> Hello, >>>>>> I'd like to change the account details e-mail template to include the >>>>>> login page, as the current one does not provide a link for the user to >>>>>> log >>>>>> in: >>>>>> >>>>>> [image: image.png] >>>>>> Which template is that? I know nothing about wicket., so I don't know >>>>>> where the text is pulled from. >>>>>> >>>>>> Thanks, >>>>>> Lee. >>>>>> >>>>>>
Re: How to change email templates?
@sebastian, I guess this is for people who are network/backend experts. I did change instances of 5443 to 443 that were already uncommented, but then OM was not accessible at all. Changed it back. @Maxim, I have attached a copy of the file I changed. Thank you. On Wed, Sep 1, 2021 at 2:41 AM Maxim Solodovnik wrote: > Please share a complete version of the template > so far I don't understand what was changed :( > > On Tue, 31 Aug 2021 at 22:21, Lee But > wrote: > >> I realised that I hadn't closed the block. >> Changing that template did nothing to what was emailed, so I don't know >> which template I need to amend. >> >> >> On Tue, Aug 31, 2021 at 2:56 PM Lee But >> wrote: >> >>> Hello, >>> >>> I amended the RegisterUserTemplate.html file (see below), but when I >>> added a user I was greeted by the "Something bad happen[ed]" screen. >>> This wicket code is confusing me a bit because I don't really know where >>> to put my amendments. First, I added the lines shown below inside the >>> block, and then outside. Both failed. >>> >>> >>> Follow this URL to login. If this is your first time logingg in, >>> change your password first. >>> https://www.otqhd.com:5443/openmeetings/;>Log in / >>> Change password >>> >>> >>> I amended the file after stopping all of the Om related servers. >>> >>> Thanks, >>> Lee >>> >>> On Tue, Aug 31, 2021 at 8:04 AM Lee But >>> wrote: >>> >>>> Okay. Thank you for the links. >>>> >>>> On Tue, Aug 31, 2021 at 5:07 AM seba.wag...@gmail.com < >>>> seba.wag...@gmail.com> wrote: >>>> >>>>> Hi Lee, >>>>> >>>>> I think you should be able to follow this guide: >>>>> https://openmeetings.apache.org/EditTemplates.html >>>>> >>>>> It leads you to those files (but on your local installation) >>>>> https://github.com/apache/openmeetings/tree/master/openmeetings-service/src/main/java/org/apache/openmeetings/service/mail/template >>>>> >>>>> >>>>> Which you can then edit and restart your local server. Just don't >>>>> forget to back them up when you upgrade to a new version :) >>>>> >>>>> Thanks >>>>> Seb >>>>> >>>>> Sebastian Wagner >>>>> Director Arrakeen Solutions, OM-Hosting.com >>>>> http://arrakeen-solutions.co.nz/ >>>>> https://om-hosting.com - Cloud & Server Hosting for HTML5 >>>>> Video-Conferencing OpenMeetings >>>>> >>>>> <https://www.youracclaim.com/badges/da4e8828-743d-4968-af6f-49033f10d60a/public_url> >>>>> <https://www.youracclaim.com/badges/b7e709c6-aa87-4b02-9faf-099038475e36/public_url> >>>>> >>>>> >>>>> On Tue, 31 Aug 2021 at 15:50, Lee But >>>>> wrote: >>>>> >>>>>> Hello, >>>>>> I'd like to change the account details e-mail template to include the >>>>>> login page, as the current one does not provide a link for the user to >>>>>> log >>>>>> in: >>>>>> >>>>>> [image: image.png] >>>>>> Which template is that? I know nothing about wicket., so I don't know >>>>>> where the text is pulled from. >>>>>> >>>>>> Thanks, >>>>>> Lee. >>>>>> >>>>>> > > -- > Best regards, > Maxim > Follow this URL to login. If this is your first time logingg in, change your password first. Log in / Change password
Re: How to change email templates?
It's the admin created template I want to change, so it has a link to the log in page. On Wed, Sep 1, 2021 at 6:13 AM Maxim Solodovnik wrote: > The template looks OK > your custom content should be moved before > > Modified email should be send on user self-registration (if correspondent > configs are enabled) > > What is not working? :) > > On Wed, 1 Sept 2021 at 12:44, Lee But > wrote: > >> @sebastian, I guess this is for people who are network/backend experts. >> I did change instances of 5443 to 443 that were already uncommented, but >> then OM was not accessible at all. Changed it back. >> >> @Maxim, I have attached a copy of the file I changed. >> Thank you. >> >> On Wed, Sep 1, 2021 at 2:41 AM Maxim Solodovnik >> wrote: >> >>> Please share a complete version of the template >>> so far I don't understand what was changed :( >>> >>> On Tue, 31 Aug 2021 at 22:21, Lee But >>> wrote: >>> >>>> I realised that I hadn't closed the block. >>>> Changing that template did nothing to what was emailed, so I don't know >>>> which template I need to amend. >>>> >>>> >>>> On Tue, Aug 31, 2021 at 2:56 PM Lee But >>>> wrote: >>>> >>>>> Hello, >>>>> >>>>> I amended the RegisterUserTemplate.html file (see below), but when I >>>>> added a user I was greeted by the "Something bad happen[ed]" screen. >>>>> This wicket code is confusing me a bit because I don't really know >>>>> where to put my amendments. First, I added the lines shown below inside >>>>> the >>>>> block, and then outside. Both failed. >>>>> >>>>> >>>>> Follow this URL to login. If this is your first time logingg >>>>> in, change your password first. >>>>> https://www.otqhd.com:5443/openmeetings/;>Log in / >>>>> Change password >>>>> >>>>> >>>>> I amended the file after stopping all of the Om related servers. >>>>> >>>>> Thanks, >>>>> Lee >>>>> >>>>> On Tue, Aug 31, 2021 at 8:04 AM Lee But >>>>> wrote: >>>>> >>>>>> Okay. Thank you for the links. >>>>>> >>>>>> On Tue, Aug 31, 2021 at 5:07 AM seba.wag...@gmail.com < >>>>>> seba.wag...@gmail.com> wrote: >>>>>> >>>>>>> Hi Lee, >>>>>>> >>>>>>> I think you should be able to follow this guide: >>>>>>> https://openmeetings.apache.org/EditTemplates.html >>>>>>> >>>>>>> It leads you to those files (but on your local installation) >>>>>>> https://github.com/apache/openmeetings/tree/master/openmeetings-service/src/main/java/org/apache/openmeetings/service/mail/template >>>>>>> >>>>>>> >>>>>>> Which you can then edit and restart your local server. Just don't >>>>>>> forget to back them up when you upgrade to a new version :) >>>>>>> >>>>>>> Thanks >>>>>>> Seb >>>>>>> >>>>>>> Sebastian Wagner >>>>>>> Director Arrakeen Solutions, OM-Hosting.com >>>>>>> http://arrakeen-solutions.co.nz/ >>>>>>> https://om-hosting.com - Cloud & Server Hosting for HTML5 >>>>>>> Video-Conferencing OpenMeetings >>>>>>> >>>>>>> <https://www.youracclaim.com/badges/da4e8828-743d-4968-af6f-49033f10d60a/public_url> >>>>>>> <https://www.youracclaim.com/badges/b7e709c6-aa87-4b02-9faf-099038475e36/public_url> >>>>>>> >>>>>>> >>>>>>> On Tue, 31 Aug 2021 at 15:50, Lee But >>>>>>> wrote: >>>>>>> >>>>>>>> Hello, >>>>>>>> I'd like to change the account details e-mail template to include >>>>>>>> the login page, as the current one does not provide a link for the >>>>>>>> user to >>>>>>>> log in: >>>>>>>> >>>>>>>> [image: image.png] >>>>>>>> Which template is that? I know nothing about wicket., so I don't >>>>>>>> know where the text is pulled from. >>>>>>>> >>>>>>>> Thanks, >>>>>>>> Lee. >>>>>>>> >>>>>>>> >>> >>> -- >>> Best regards, >>> Maxim >>> >> > > -- > Best regards, > Maxim >
Re: Registering on behalf of users - no confirmation email
Hello Maxim, I'm testing with my own email addresses until I am sure that I have everything right. I think that would be great. Also, a link to the login page would be useful, as without it, users don't know the URL of the website. Regards, Lee On Wed, Aug 25, 2021 at 2:53 AM Maxim Solodovnik wrote: > Hello Lee, > > this is by design > these email settings are for self-registration only > Password is not being sent for security reasons > > As workaround your users can click "Forget password" > enter login/email and change the password > > We can add some additional setting to send email to newly created users > with instructions above :) > WDYT? > > On Tue, 24 Aug 2021 at 23:07, Lee But > wrote: > >> Hello, >> >> I turned off self-registering, and when I set up a user as admin, no >> verification email is sent despite the key being set to true. >> [image: image.png] >> >> Also, the email that contains the user's account details does not contain >> the password, nor a link to the openmeetings page, so they cannot log in. >> Here's the message: >> >> [image: image.png] >> >> Thank you, >> Lee >> >> > > -- > Best regards, > Maxim >
Re: No session recording - OM 6.10
Hello, Can this issue with ublockOrigin blocking screen sharing and recording be added as a known issue to the installation guides and user manuals, and on the website somewhere? It looks like ublockOrigin must be disabled for the site. Despite not actively filtering, it is doing something. Maybe some others can test to reproduce. Thanks, Lee On Tue, Aug 24, 2021 at 11:02 AM Lee But wrote: > I installed Opera browser, which worked. > Then I thought it could be browser extensions on the other browsers. > I disabled them one at a time. When I disabled ublockOrigin, it worked. > I'm not sure what ublockOrigin is doing. > > Something simple in the end. > > On Tue, Aug 24, 2021 at 10:34 AM Ali Alhaidary < > ali.alhaid...@the5stars.org> wrote: > >> The good news is that OM is working very good on Harmony as well :-) >> >> Ali >> On 8/24/21 1:32 PM, Ali Alhaidary wrote: >> >> @Lee, you are more than welcome, just keep us posted of the reason and >> resolution. >> >> Ali >> On 8/24/21 1:26 PM, Lee But wrote: >> >> Thank you for your help. >> We have worked out that the problem is likely with my computer setup and >> not a server problem. >> @ali, thank you very much for your help with troubleshooting. >> >> All the best, >> Lee >> >> On Tue, Aug 24, 2021 at 9:11 AM Ali Alhaidary < >> ali.alhaid...@the5stars.org> wrote: >> >>> @Lee, try now please. >>> >>> Ali >>> On 8/24/21 12:09 PM, Lee But wrote: >>> >>> @Ali, I went to the room, but the share button does nothing using >>> Firefox and Chromium. >>> [image: image.png] >>> >>> Server: Debian 10 >>> Kernel: 4.19.0 (Cannot upgrade - OpenVZ) >>> CPU: AMD Opteron 4386 - 1 core >>> RAM: 2GB guaranteed >>> >>> All packages relating to Openoffice were installed according to the user >>> guide. >>> >>> Thanks, >>> Lee. >>> >>> >>> On Tue, Aug 24, 2021 at 7:35 AM Ali Alhaidary < >>> ali.alhaid...@the5stars.org> wrote: >>> >>>> Lee, >>>> >>>> Would you put your server/client environment in detail please. >>>> >>>> Ali >>>> On 8/24/21 8:06 AM, Maxim Solodovnik wrote: >>>> >>>> I need someone who can reproduce the issue :( (was reported 3+ times >>>> .) >>>> Hopefully someone can help :) >>>> >>>> On Tue, 24 Aug 2021 at 11:18, Ali Alhaidary < >>>> ali.alhaid...@the5stars.org> wrote: >>>> >>>>> >>>>> On 8/24/21 5:43 AM, Maxim Solodovnik wrote: >>>>> >>>>> Hello Lee, >>>>> >>>>> Can you try to click the "About" link at the Dashboard? >>>>> Can you see the "About" dialog? >>>>> >>>>> @All if you can reproduce the issue with dialog don't popping up, can >>>>> you share the steps with me? >>>>> >>>>> @Max >>>>> >>>>> Things are working here as expected in production since 6.0.0 till now >>>>> 7.0.0#13, no issue has been reported regarding this case. Reviewing our >>>>> case database, similar issue was reported when some other dialog box from >>>>> the browser was waiting a response and the teacher is trying to start >>>>> recording and nothing happens (his claim). Is there any thing specific I >>>>> can do? >>>>> >>>>> @Lee >>>>> >>>>> Can you please register as new user https://the5stars.org and then >>>>> access >>>>> https://school.the5stars.org/class/mod/openmeetings/view.php?id=181 >>>>> from the same browsers. >>>>> >>>>> Or VM if the issue is reproducible in VM? >>>>> >>>>> >>>>> On Mon, 23 Aug 2021 at 23:34, Alvaro wrote: >>>>> >>>>>> Hi Lee, >>>>>> >>>>>> Just checked OM 6.1.0 on Debian 10 and that >>>>>> point works as expected. >>>>>> >>>>>> Could you please indicate where is the browser >>>>>> client, Lan or Internet? >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Mon, 23 Aug 2021 14:30:23 + >>>>>> Lee But wrote: >>>>>&g
Re: iptables rule stops tomcat/catalina
I have an update. It looks like my VPS is not opening ports by default, so not having that iptable rule does not leave ports open, and OpenMeetings is working. On Thu, Aug 26, 2021 at 3:13 AM Maxim Solodovnik wrote: > I'm not an expert at iptables > I can only recommend to read `man iptables` and google :) > > On Wed, 25 Aug 2021 at 19:34, Lee But > wrote: > >> I still haven't been able to work out what's wrong. >> Everytime I add the iptables -A INPUT -j DROP rule, OpenMeetings cannot >> be reached by the browser and times out, and restarting the servers in my >> original message still produces the same error. >> >> On Tue, Aug 24, 2021 at 2:53 PM Lee But >> wrote: >> >>> Hello, >>> I've applied the various iptables rules as per the installation guide >>> and VPS securing (see attached iptables.txt file), while docker has added >>> many 'chains' I don't understand. iptables is new to me. >>> >>> Everything works until I apply the rule iptables -A INPUT -j DROP >>> After that, tomcat/catalina does not start. I have these commands in a >>> bash script: >>> sudo /etc/init.d/mysql restart >>> sudo /etc/init.d/coturn restart >>> sudo /etc/init.d/docker restart >>> sudo docker restart kms >>> sudo /etc/init.d/tomcat34 restart >>> >>> This is what I see this in the terminal: >>> >>> NOTE: Picked up JDK_JAVA_OPTIONS: >>> --add-opens=java.base/java.lang=ALL-UNNAMED --add-opens=java.base/ >>> java.io=ALL-UNNAMED --add-opens=java.base/java.util=ALL-UNNAMED >>> --add-opens=java.base/java.util.concurrent=ALL-UNNAMED >>> --add-opens=java.rmi/sun.rmi.transport=ALL-UNNAMED >>> Aug 24, 2021 10:23:35 PM org.apache.catalina.startup.Catalina stopServer >>> SEVERE: Could not contact [localhost:8005] (base port [8005] and offset >>> [0]). Tomcat may not be running. >>> Aug 24, 2021 10:23:35 PM org.apache.catalina.startup.Catalina stopServer >>> SEVERE: Error stopping Catalina >>> java.net.ConnectException: Connection timed out (Connection timed out) >>> at java.base/java.net.PlainSocketImpl.socketConnect(Native Method) >>> at >>> java.base/java.net.AbstractPlainSocketImpl.doConnect(AbstractPlainSocketImpl.java:399) >>> at >>> java.base/java.net.AbstractPlainSocketImpl.connectToAddress(AbstractPlainSocketImpl.java:242) >>> at >>> java.base/java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:224) >>> at java.base/java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392) >>> at java.base/java.net.Socket.connect(Socket.java:609) >>> at java.base/java.net.Socket.connect(Socket.java:558) >>> at java.base/java.net.Socket.(Socket.java:454) >>> at java.base/java.net.Socket.(Socket.java:231) >>> at org.apache.catalina.startup.Catalina.stopServer(Catalina.java:667) >>> at >>> java.base/jdk.internal.reflect.NativeMethodAccessorImpl.invoke0(Native >>> Method) >>> at >>> java.base/jdk.internal.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62) >>> at >>> java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) >>> at java.base/java.lang.reflect.Method.invoke(Method.java:566) >>> at org.apache.catalina.startup.Bootstrap.stopServer(Bootstrap.java:391) >>> at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:481) >>> >>> I have attached the iptables configuration in a text file. >>> Do I need to open port 8005 as well? >>> Thank you all, >>> Lee >>> >> > > -- > Best regards, > Maxim >
Re: Registering on behalf of users - no confirmation email
Isn't there a way to send an ID key in the invitation email that can automatically remove the record that matches the key. Or, match the email address? On Thu, Aug 26, 2021 at 5:36 AM Maxim Solodovnik wrote: > > > On Thu, 26 Aug 2021 at 12:18, Lee But > wrote: > >> Hello Maxim, >> >> The is just to point to the website that >> openmeetings is on so that the user can recognise it. Example, Maxim >> Solodonvik at www.openmeetings.apache.org has invited you to join their >> online meeting room(s). >> Perhaps, it would be better if the admin could create an 'organisation >> name' and have that in the invitation instead. >> >> The , would point directly to a page to change the password and >> complete registration. >> > > Well > Actually both URLs will be > https://om.alteametasoft.com/openmeetings/signin > This is why I'm asking :) > > >> What I mean by 'deregister' is to remove the information that the admin >> created: names, password and email address. That may not be clear. >> >> I suppose it could read, 'If you have received this invitation in error >> or do not wish to join the meeting room(s), please *click here* to >> deregister your information shown in this email.' >> > > As I wrote before > this is impossible without successful login > which impossible without "change the password and complete registration" > So the footer looks useless to me :( > > >> >> On Thu, Aug 26, 2021 at 4:59 AM Maxim Solodovnik >> wrote: >> >>> Thanks for the templates :) >>> >>> I'll do the following: >>> >>> 1) will create the key `send.invite.to.user.created.by.admin` >>> 2) will use "Formal version" to create the template >>> (you can modify it any time as described here >>> https://openmeetings.apache.org/EditTemplates.html) >>> >>> Couple of questions: >>> 1) why do we need both "" and ""? >>> 2) why do we need this "If you have received this invitation in error, >>> please *click here* to deregister." footer? the only way to de-register >>> is to complete registration then to delete themselves >>> >>> >>> On Wed, 25 Aug 2021 at 20:39, Ali Alhaidary >>> wrote: >>> >>>> Nice :-) >>>> >>>> Ali >>>> On 8/25/21 3:07 PM, Lee But wrote: >>>> >>>> Hello Maxim, >>>> >>>> Here are two templates. One is formal, the other informal. I think it >>>> would be useful for admins to view default templates and create their own >>>> invitations as well. >>>> possible keys could be: >>>> >>>> send.formal.invite.to.user.created.by.admin >>>> send.casual.invite.to.user.created.by.admin >>>> send.custom.invite.to.user.created.by.admin >>>> >>>> In the examples below, the name order could be swapped according to the >>>> language being used. >>>> >>>> * >>>> Formal version >>>> >>>> * >>>> >>>> Dear , >>>> >>>> at has invited >>>> you to join their online meeting room(s). >>>> >>>> To complete your registration and use the room(s), please visit the >>>> link below and create a strong password. >>>> >>>> >>>> >>>> Your username for logging in is . >>>> >>>> Thank you for joining our meeting rooms. >>>> >>>> Best regards, >>>> >>>> >>>> >>>> >>>> If you have received this invitation in error, please *click here* to >>>> deregister. >>>> >>>> >>>> >>>> * >>>> Casual version >>>> >>>> * >>>> >>>> Hi , >>>> >>>> here from . I’ve >>>> added you as a user to our online meeting room(s). >>>> >>>> To use the room(s), you need to complete your registration. Click the >>>> link below and create a strong password. >>>> >>>> >>>> >>>> Your username for logging in is . >>>> >>>> Thanks for joining our meeting room(s). >>>> >>>> See you soon! >>>> >>>> >>>> >>>> >>>> If I’ve sent you this invitation b
Re: Registering on behalf of users - no confirmation email
Hello Maxim, The is just to point to the website that openmeetings is on so that the user can recognise it. Example, Maxim Solodonvik at www.openmeetings.apache.org has invited you to join their online meeting room(s). Perhaps, it would be better if the admin could create an 'organisation name' and have that in the invitation instead. The , would point directly to a page to change the password and complete registration. What I mean by 'deregister' is to remove the information that the admin created: names, password and email address. That may not be clear. I suppose it could read, 'If you have received this invitation in error or do not wish to join the meeting room(s), please *click here* to deregister your information shown in this email.' On Thu, Aug 26, 2021 at 4:59 AM Maxim Solodovnik wrote: > Thanks for the templates :) > > I'll do the following: > > 1) will create the key `send.invite.to.user.created.by.admin` > 2) will use "Formal version" to create the template > (you can modify it any time as described here > https://openmeetings.apache.org/EditTemplates.html) > > Couple of questions: > 1) why do we need both "" and ""? > 2) why do we need this "If you have received this invitation in error, > please *click here* to deregister." footer? the only way to de-register > is to complete registration then to delete themselves > > > On Wed, 25 Aug 2021 at 20:39, Ali Alhaidary > wrote: > >> Nice :-) >> >> Ali >> On 8/25/21 3:07 PM, Lee But wrote: >> >> Hello Maxim, >> >> Here are two templates. One is formal, the other informal. I think it >> would be useful for admins to view default templates and create their own >> invitations as well. >> possible keys could be: >> >> send.formal.invite.to.user.created.by.admin >> send.casual.invite.to.user.created.by.admin >> send.custom.invite.to.user.created.by.admin >> >> In the examples below, the name order could be swapped according to the >> language being used. >> >> * >> Formal version >> >> * >> >> Dear , >> >> at has invited >> you to join their online meeting room(s). >> >> To complete your registration and use the room(s), please visit the link >> below and create a strong password. >> >> >> >> Your username for logging in is . >> >> Thank you for joining our meeting rooms. >> >> Best regards, >> >> >> >> >> If you have received this invitation in error, please *click here* to >> deregister. >> >> >> >> * >> Casual version >> >> * >> >> Hi , >> >> here from . I’ve >> added you as a user to our online meeting room(s). >> >> To use the room(s), you need to complete your registration. Click the >> link below and create a strong password. >> >> >> >> Your username for logging in is . >> >> Thanks for joining our meeting room(s). >> >> See you soon! >> >> >> >> >> If I’ve sent you this invitation by mistake, please *click here* to >> deregister. >> >> >> >> >> On Wed, Aug 25, 2021 at 6:13 AM Maxim Solodovnik >> wrote: >> >>> Maybe you can help to create a template for such email (as text) here? >>> :) >>> and maybe propose a configuration key name? >>> >>> `send.email.when.created.by.admin`? Maybe better ideas? :)) >>> >>> On Wed, 25 Aug 2021 at 12:18, Lee But >>> wrote: >>> >>>> Hello Maxim, >>>> >>>> I'm testing with my own email addresses until I am sure that I have >>>> everything right. >>>> I think that would be great. Also, a link to the login page would be >>>> useful, as without it, users don't know the URL of the website. >>>> >>>> Regards, >>>> Lee >>>> >>>> On Wed, Aug 25, 2021 at 2:53 AM Maxim Solodovnik >>>> wrote: >>>> >>>>> Hello Lee, >>>>> >>>>> this is by design >>>>> these email settings are for self-registration only >>>>> Password is not being sent for security reasons >>>>> >>>>> As workaround your users can click "Forget password" >>>>> enter login/email and change the password >>>>> >>>>> We can add some additional setting to send email to newly created >>>>> users with instructions above :) >>>>> WDYT? >>>>> >>>>> On Tue, 24 Aug 2021 at 23:07, Lee But >>>>> wrote: >>>>> >>>>>> Hello, >>>>>> >>>>>> I turned off self-registering, and when I set up a user as admin, no >>>>>> verification email is sent despite the key being set to true. >>>>>> [image: image.png] >>>>>> >>>>>> Also, the email that contains the user's account details does not >>>>>> contain the password, nor a link to the openmeetings page, so they cannot >>>>>> log in. >>>>>> Here's the message: >>>>>> >>>>>> [image: image.png] >>>>>> >>>>>> Thank you, >>>>>> Lee >>>>>> >>>>>> >>>>> >>>>> -- >>>>> Best regards, >>>>> Maxim >>>>> >>>> >>> >>> -- >>> Best regards, >>> Maxim >>> >> > > -- > Best regards, > Maxim >
Re: Registering on behalf of users - no confirmation email
Hello Maxim, Here are two templates. One is formal, the other informal. I think it would be useful for admins to view default templates and create their own invitations as well. possible keys could be: send.formal.invite.to.user.created.by.admin send.casual.invite.to.user.created.by.admin send.custom.invite.to.user.created.by.admin In the examples below, the name order could be swapped according to the language being used. * Formal version * Dear , at has invited you to join their online meeting room(s). To complete your registration and use the room(s), please visit the link below and create a strong password. Your username for logging in is . Thank you for joining our meeting rooms. Best regards, If you have received this invitation in error, please *click here* to deregister. * Casual version * Hi , here from . I’ve added you as a user to our online meeting room(s). To use the room(s), you need to complete your registration. Click the link below and create a strong password. Your username for logging in is . Thanks for joining our meeting room(s). See you soon! If I’ve sent you this invitation by mistake, please *click here* to deregister. On Wed, Aug 25, 2021 at 6:13 AM Maxim Solodovnik wrote: > Maybe you can help to create a template for such email (as text) here? :) > and maybe propose a configuration key name? > > `send.email.when.created.by.admin`? Maybe better ideas? :)) > > On Wed, 25 Aug 2021 at 12:18, Lee But > wrote: > >> Hello Maxim, >> >> I'm testing with my own email addresses until I am sure that I have >> everything right. >> I think that would be great. Also, a link to the login page would be >> useful, as without it, users don't know the URL of the website. >> >> Regards, >> Lee >> >> On Wed, Aug 25, 2021 at 2:53 AM Maxim Solodovnik >> wrote: >> >>> Hello Lee, >>> >>> this is by design >>> these email settings are for self-registration only >>> Password is not being sent for security reasons >>> >>> As workaround your users can click "Forget password" >>> enter login/email and change the password >>> >>> We can add some additional setting to send email to newly created users >>> with instructions above :) >>> WDYT? >>> >>> On Tue, 24 Aug 2021 at 23:07, Lee But >>> wrote: >>> >>>> Hello, >>>> >>>> I turned off self-registering, and when I set up a user as admin, no >>>> verification email is sent despite the key being set to true. >>>> [image: image.png] >>>> >>>> Also, the email that contains the user's account details does not >>>> contain the password, nor a link to the openmeetings page, so they cannot >>>> log in. >>>> Here's the message: >>>> >>>> [image: image.png] >>>> >>>> Thank you, >>>> Lee >>>> >>>> >>> >>> -- >>> Best regards, >>> Maxim >>> >> > > -- > Best regards, > Maxim >
Re: iptables rule stops tomcat/catalina
I still haven't been able to work out what's wrong. Everytime I add the iptables -A INPUT -j DROP rule, OpenMeetings cannot be reached by the browser and times out, and restarting the servers in my original message still produces the same error. On Tue, Aug 24, 2021 at 2:53 PM Lee But wrote: > Hello, > I've applied the various iptables rules as per the installation guide and > VPS securing (see attached iptables.txt file), while docker has added many > 'chains' I don't understand. iptables is new to me. > > Everything works until I apply the rule iptables -A INPUT -j DROP > After that, tomcat/catalina does not start. I have these commands in a > bash script: > sudo /etc/init.d/mysql restart > sudo /etc/init.d/coturn restart > sudo /etc/init.d/docker restart > sudo docker restart kms > sudo /etc/init.d/tomcat34 restart > > This is what I see this in the terminal: > > NOTE: Picked up JDK_JAVA_OPTIONS: > --add-opens=java.base/java.lang=ALL-UNNAMED > --add-opens=java.base/java.io=ALL-UNNAMED > --add-opens=java.base/java.util=ALL-UNNAMED > --add-opens=java.base/java.util.concurrent=ALL-UNNAMED > --add-opens=java.rmi/sun.rmi.transport=ALL-UNNAMED > Aug 24, 2021 10:23:35 PM org.apache.catalina.startup.Catalina stopServer > SEVERE: Could not contact [localhost:8005] (base port [8005] and offset > [0]). Tomcat may not be running. > Aug 24, 2021 10:23:35 PM org.apache.catalina.startup.Catalina stopServer > SEVERE: Error stopping Catalina > java.net.ConnectException: Connection timed out (Connection timed out) > at java.base/java.net.PlainSocketImpl.socketConnect(Native Method) > at > java.base/java.net.AbstractPlainSocketImpl.doConnect(AbstractPlainSocketImpl.java:399) > at > java.base/java.net.AbstractPlainSocketImpl.connectToAddress(AbstractPlainSocketImpl.java:242) > at > java.base/java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:224) > at java.base/java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392) > at java.base/java.net.Socket.connect(Socket.java:609) > at java.base/java.net.Socket.connect(Socket.java:558) > at java.base/java.net.Socket.(Socket.java:454) > at java.base/java.net.Socket.(Socket.java:231) > at org.apache.catalina.startup.Catalina.stopServer(Catalina.java:667) > at java.base/jdk.internal.reflect.NativeMethodAccessorImpl.invoke0(Native > Method) > at > java.base/jdk.internal.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62) > at > java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) > at java.base/java.lang.reflect.Method.invoke(Method.java:566) > at org.apache.catalina.startup.Bootstrap.stopServer(Bootstrap.java:391) > at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:481) > > I have attached the iptables configuration in a text file. > Do I need to open port 8005 as well? > Thank you all, > Lee >
Re: webrtc error
Hello Yah, I had this problem. Are you using Firefox? Have you changed the *about:config* settings? Make sure that *media.peerconnection.enabled* = true Regards, Lee On Sun, Aug 29, 2021 at 2:43 PM Yah's Global Kingdom wrote: > I am seeing this error when entering rooms > SyntaxError: Failed to construct 'RTCPeerConnection': ICE server parse > failed > > Where do I fix this? > > > <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=webmail_term=icon> > Virus-free. > www.avast.com > <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=webmail_term=link> > <#m_-9107982489468429169_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> >
Re: webrtc error
Oh, I read the message too quickly. My error was slightly different, but it was about RTCPeerConnection, so my solution may not be directly related. On Tue, Aug 31, 2021 at 3:32 AM Lee But wrote: > Hello Yah, > > I had this problem. > Are you using Firefox? > Have you changed the *about:config* settings? > Make sure that *media.peerconnection.enabled* = true > > Regards, > Lee > > On Sun, Aug 29, 2021 at 2:43 PM Yah's Global Kingdom > wrote: > >> I am seeing this error when entering rooms >> SyntaxError: Failed to construct 'RTCPeerConnection': ICE server parse >> failed >> >> Where do I fix this? >> >> >> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=webmail_term=icon> >> Virus-free. >> www.avast.com >> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=webmail_term=link> >> <#m_-942481460550359792_m_-3981613388050490345_m_-9107982489468429169_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> >> >
How to change email templates?
Hello, I'd like to change the account details e-mail template to include the login page, as the current one does not provide a link for the user to log in: [image: image.png] Which template is that? I know nothing about wicket., so I don't know where the text is pulled from. Thanks, Lee.
Re: How to change email templates?
Okay. Thank you for the links. On Tue, Aug 31, 2021 at 5:07 AM seba.wag...@gmail.com wrote: > Hi Lee, > > I think you should be able to follow this guide: > https://openmeetings.apache.org/EditTemplates.html > > It leads you to those files (but on your local installation) > https://github.com/apache/openmeetings/tree/master/openmeetings-service/src/main/java/org/apache/openmeetings/service/mail/template > > > Which you can then edit and restart your local server. Just don't forget > to back them up when you upgrade to a new version :) > > Thanks > Seb > > Sebastian Wagner > Director Arrakeen Solutions, OM-Hosting.com > http://arrakeen-solutions.co.nz/ > https://om-hosting.com - Cloud & Server Hosting for HTML5 > Video-Conferencing OpenMeetings > > <https://www.youracclaim.com/badges/da4e8828-743d-4968-af6f-49033f10d60a/public_url> > <https://www.youracclaim.com/badges/b7e709c6-aa87-4b02-9faf-099038475e36/public_url> > > > On Tue, 31 Aug 2021 at 15:50, Lee But > wrote: > >> Hello, >> I'd like to change the account details e-mail template to include the >> login page, as the current one does not provide a link for the user to log >> in: >> >> [image: image.png] >> Which template is that? I know nothing about wicket., so I don't know >> where the text is pulled from. >> >> Thanks, >> Lee. >> >>
Re: Registering on behalf of users - no confirmation email
1) Perhaps there is no need for a new template, just make it possible for an admin-registered user to follow a link to log in. Yes, a password with registration is a bad idea. Which methods are available for a user to log in without knowing their password if not sent by the admin? My bank sends verification codes via email, so I suppose there must be some way to use email securely. 2) I think the base url is enough, the same as the application.base.url key in configuration. On Thu, Sep 2, 2021 at 3:33 AM Maxim Solodovnik wrote: > There is no such thing as temporary password > > From security perspective it is not good idea to send login and password > via same channel > And extremely bad idea to send them in same message > > I'm ready to add some changes to the registration template :) > Since email is being sent while registering > > 1) Do we need a separate template? > 2) Shall we add server URL to the current template? > > > On Sat, 28 Aug 2021 at 10:50, Lee But > wrote: > >> I was just thinking; does the template need a line with the temporary >> password in it? >> >> *Your temporary password is . You should change it when you >> complete your registration.* >> >> On Thu, Aug 26, 2021 at 8:39 AM Ali Alhaidary < >> ali.alhaid...@the5stars.org> wrote: >> >>> >>> On 8/26/21 8:46 AM, Maxim Solodovnik wrote: >>> >>> I would call it: security issue :) >>> IMO such destructive action like purging user should be very much >>> secured >>> >>> Admins periodically review user list and remove old, not fully >>> registered or not verified users. Also, a user needs to remove his contact >>> information if the application keeps interacting with him by email for >>> example, however, OM does not do that. >>> >>> >>> On Thu, 26 Aug 2021 at 12:44, Lee But >>> wrote: >>> >>>> Isn't there a way to send an ID key in the invitation email that can >>>> automatically remove the record that matches the key. Or, match the email >>>> address? >>>> >>>> On Thu, Aug 26, 2021 at 5:36 AM Maxim Solodovnik >>>> wrote: >>>> >>>>> >>>>> >>>>> On Thu, 26 Aug 2021 at 12:18, Lee But >>>>> wrote: >>>>> >>>>>> Hello Maxim, >>>>>> >>>>>> The is just to point to the website that >>>>>> openmeetings is on so that the user can recognise it. Example, Maxim >>>>>> Solodonvik at www.openmeetings.apache.org has invited you to join >>>>>> their online meeting room(s). >>>>>> Perhaps, it would be better if the admin could create an >>>>>> 'organisation name' and have that in the invitation instead. >>>>>> >>>>>> The , would point directly to a page to change the password and >>>>>> complete registration. >>>>>> >>>>> >>>>> Well >>>>> Actually both URLs will be >>>>> https://om.alteametasoft.com/openmeetings/signin >>>>> This is why I'm asking :) >>>>> >>>>> >>>>>> What I mean by 'deregister' is to remove the information that the >>>>>> admin created: names, password and email address. That may not be clear. >>>>>> >>>>>> I suppose it could read, 'If you have received this invitation in >>>>>> error or do not wish to join the meeting room(s), please *click here* to >>>>>> deregister your information shown in this email.' >>>>>> >>>>> >>>>> As I wrote before >>>>> this is impossible without successful login >>>>> which impossible without "change the password and complete >>>>> registration" >>>>> So the footer looks useless to me :( >>>>> >>>>> >>>>>> >>>>>> On Thu, Aug 26, 2021 at 4:59 AM Maxim Solodovnik < >>>>>> solomax...@gmail.com> wrote: >>>>>> >>>>>>> Thanks for the templates :) >>>>>>> >>>>>>> I'll do the following: >>>>>>> >>>>>>> 1) will create the key `send.invite.to.user.created.by.admin` >>>>>>> 2) will use "Formal version" to create the template >>>>>>> (you can modify
Re: Registering on behalf of users - no confirmation email
Done: https://issues.apache.org/jira/browse/OPENMEETINGS-2658 On Thu, Sep 2, 2021 at 6:11 AM Maxim Solodovnik wrote: > > > On Thu, 2 Sept 2021 at 11:27, Lee But > wrote: > >> 1) Perhaps there is no need for a new template, just make it possible for >> an admin-registered user to follow a link to log in. >> Yes, a password with registration is a bad idea. >> Which methods are available for a user to log in without knowing their >> password if not sent by the admin? >> > > "Forget password" link should work :)) > > My bank sends verification codes via email, so I suppose there must be >> some way to use email securely. >> > > Better way to send password in separate email > OR even better send it to alternative email or via SMS/Push (different > channel) > > "Forget password" will do it :) (with hash in URL as temporary password :)) > > >> 2) I think the base url is enough, the same as the application.base.url >> key in configuration. >> > > OK > Could you please create JIRA: > https://issues.apache.org/jira/browse/OPENMEETINGS (you need to be > registered :) > > >> >> On Thu, Sep 2, 2021 at 3:33 AM Maxim Solodovnik >> wrote: >> >>> There is no such thing as temporary password >>> >>> From security perspective it is not good idea to send login and password >>> via same channel >>> And extremely bad idea to send them in same message >>> >>> I'm ready to add some changes to the registration template :) >>> Since email is being sent while registering >>> >>> 1) Do we need a separate template? >>> 2) Shall we add server URL to the current template? >>> >>> >>> On Sat, 28 Aug 2021 at 10:50, Lee But >>> wrote: >>> >>>> I was just thinking; does the template need a line with the temporary >>>> password in it? >>>> >>>> *Your temporary password is . You should change it when you >>>> complete your registration.* >>>> >>>> On Thu, Aug 26, 2021 at 8:39 AM Ali Alhaidary < >>>> ali.alhaid...@the5stars.org> wrote: >>>> >>>>> >>>>> On 8/26/21 8:46 AM, Maxim Solodovnik wrote: >>>>> >>>>> I would call it: security issue :) >>>>> IMO such destructive action like purging user should be very much >>>>> secured >>>>> >>>>> Admins periodically review user list and remove old, not fully >>>>> registered or not verified users. Also, a user needs to remove his >>>>> contact >>>>> information if the application keeps interacting with him by email for >>>>> example, however, OM does not do that. >>>>> >>>>> >>>>> On Thu, 26 Aug 2021 at 12:44, Lee But >>>>> wrote: >>>>> >>>>>> Isn't there a way to send an ID key in the invitation email that can >>>>>> automatically remove the record that matches the key. Or, match the email >>>>>> address? >>>>>> >>>>>> On Thu, Aug 26, 2021 at 5:36 AM Maxim Solodovnik < >>>>>> solomax...@gmail.com> wrote: >>>>>> >>>>>>> >>>>>>> >>>>>>> On Thu, 26 Aug 2021 at 12:18, Lee But >>>>>>> wrote: >>>>>>> >>>>>>>> Hello Maxim, >>>>>>>> >>>>>>>> The is just to point to the website that >>>>>>>> openmeetings is on so that the user can recognise it. Example, Maxim >>>>>>>> Solodonvik at www.openmeetings.apache.org has invited you to join >>>>>>>> their online meeting room(s). >>>>>>>> Perhaps, it would be better if the admin could create an >>>>>>>> 'organisation name' and have that in the invitation instead. >>>>>>>> >>>>>>>> The , would point directly to a page to change the password >>>>>>>> and complete registration. >>>>>>>> >>>>>>> >>>>>>> Well >>>>>>> Actually both URLs will be >>>>>>> https://om.alteametasoft.com/openmeetings/signin >>>>>>> This is why I'm asking :) >>>>>>> >>>>>>> >>>>>>>> What I
Re: How to change email templates?
@maxim, Probably. In the configuration it is the same as the key: application.base.url Which directory is that template in, so I can amend it? Thanks, Lee On Wed, Sep 1, 2021 at 2:06 PM Maxim Solodovnik wrote: > > > On Wed, 1 Sept 2021 at 16:31, Lee But > wrote: > >> @maxim, the email sent after admin creating a user is this one, which is >> why we had the discussion about creating a template before: >> [image: image.png] >> > > forgot about it :( > So it seems the only change required is to add "Server URL" to the > template? :)) > > > >> @Denis, thanks Denis. Yes, I followed Alvaro's tutorial for Debian 10. OM >> is installed on a VPS with Debian 10. All the required servers were >> installed with OM. >> >> @alvaro, I do not see your message in the thread, even when expanded, so >> I can't get the attachment. I saw your message on what was posted with >> @Denis's response. >> The instructions in the tutorial use sudo to start the servers, so I did >> the same in the script, I'll look into the stop sequence. Thanks for that. >> [image: image.png] >> >> Thank you all for your help, >> Lee >> >> >> >> On Wed, Sep 1, 2021 at 7:16 AM Denis Noctor >> wrote: >> >>> Exactly. >>> >>> Sent from my iPhone >>> >>> > On Sep 1, 2021, at 2:12 AM, Alvaro wrote: >>> > >>> > Hello Lee, >>> > >>> > That script to stop all servers will not work. >>> > KMS must be stopped before docker, and without >>> > sudo for any server. >>> > >>> > Please take a look the attached script >>> > called "stop_todo", >>> > >>> > ...and save the order of the servers stop. >>> > >>> > >>> > >>> > >>> > >>> > On Wed, 1 Sep 2021 01:27:10 + >>> > Lee But wrote: >>> > >>> >> Hello Sebastian, >>> >> Thank you for your answers. >>> >> >>> >> Yes, I made a bash script to stop the servers that are mentioned in >>> the >>> >> installation tutorial from the openmeetings site: >>> >> sudo /etc/init.d/mysql stop >>> >> sudo /etc/init.d/coturn stop >>> >> sudo /etc/init.d/docker stop >>> >> sudo docker stop kms >>> >> sudo /etc/init.d/tomcat34 stop >>> >> >>> >> This is the first time I've had a VPS, set it up and installed >>> OpenMeetings >>> >> on it, so I have no idea about how to change the ports in OM, nor >>> which >>> >> component determines the port. >>> >> I just followed the tutorial, which I assumed was following best >>> practices, >>> >> since it is linked to from OpenMeetings. >>> >> >>> >> Regards, >>> >> Lee >>> >> >>> >> On Tue, Aug 31, 2021 at 10:40 PM seba.wag...@gmail.com < >>> >> seba.wag...@gmail.com> wrote: >>> >> >>> >>> Are you sure that you have stopped and restarted all servers before >>> >>> changing the template ? >>> >>> >>> >>> Maybe just put in some other markup into this and other files and >>> also in >>> >>> other positions of the template. Until you find the one you want to >>> edit. >>> >>> >>> >>> Also might be useful to move your installation from port 5443 to just >>> >>> default https port (443). Some corporate firewalls do not allow >>> traffic >>> >>> other then standard ports. >>> >>> >>> >>> Thanks >>> >>> Seb >>> >>> >>> >>> Sebastian Wagner >>> >>> Director Arrakeen Solutions, OM-Hosting.com >>> >>> http://arrakeen-solutions.co.nz/ >>> >>> https://om-hosting.com - Cloud & Server Hosting for HTML5 >>> >>> Video-Conferencing OpenMeetings >>> >>> >>> >>> < >>> https://www.youracclaim.com/badges/da4e8828-743d-4968-af6f-49033f10d60a/public_url >>> > >>> >>> < >>> https://www.youracclaim.com/badges/b7e709c6-aa87-4b02-9faf-099038475e36/public_url >>> > >>> >>> >>> >>> >>> >>> On Wed, 1 Sept 2021 at 03:21, Lee But >>> >>> w
Re: How to change email templates?
Hello Maxim, This one, the one that was sent when I as admin registered a new user to test with, which received this email: [image: image.png] Should I register the user@openmeetings.apache.org address as a user so you can see the email directly? On Thu, Sep 2, 2021 at 4:21 AM Maxim Solodovnik wrote: > > > On Thu, 2 Sept 2021 at 11:16, Lee But > wrote: > >> @maxim, >> >> Probably. In the configuration it is the same as the key: >> application.base.url >> Which directory is that template in, so I can amend it? >> > > now I'm totally lost in this conversation :( > I thought we still talking about registration template > And you did some changes to it already > > What template would you like to change? > > >> Thanks, >> Lee >> >> On Wed, Sep 1, 2021 at 2:06 PM Maxim Solodovnik >> wrote: >> >>> >>> >>> On Wed, 1 Sept 2021 at 16:31, Lee But >>> wrote: >>> >>>> @maxim, the email sent after admin creating a user is this one, which >>>> is why we had the discussion about creating a template before: >>>> [image: image.png] >>>> >>> >>> forgot about it :( >>> So it seems the only change required is to add "Server URL" to the >>> template? :)) >>> >>> >>> >>>> @Denis, thanks Denis. Yes, I followed Alvaro's tutorial for Debian 10. >>>> OM is installed on a VPS with Debian 10. All the required servers were >>>> installed with OM. >>>> >>>> @alvaro, I do not see your message in the thread, even when expanded, >>>> so I can't get the attachment. I saw your message on what was posted with >>>> @Denis's response. >>>> The instructions in the tutorial use sudo to start the servers, so I >>>> did the same in the script, I'll look into the stop sequence. Thanks for >>>> that. >>>> [image: image.png] >>>> >>>> Thank you all for your help, >>>> Lee >>>> >>>> >>>> >>>> On Wed, Sep 1, 2021 at 7:16 AM Denis Noctor >>>> wrote: >>>> >>>>> Exactly. >>>>> >>>>> Sent from my iPhone >>>>> >>>>> > On Sep 1, 2021, at 2:12 AM, Alvaro wrote: >>>>> > >>>>> > Hello Lee, >>>>> > >>>>> > That script to stop all servers will not work. >>>>> > KMS must be stopped before docker, and without >>>>> > sudo for any server. >>>>> > >>>>> > Please take a look the attached script >>>>> > called "stop_todo", >>>>> > >>>>> > ...and save the order of the servers stop. >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > >>>>> > On Wed, 1 Sep 2021 01:27:10 + >>>>> > Lee But wrote: >>>>> > >>>>> >> Hello Sebastian, >>>>> >> Thank you for your answers. >>>>> >> >>>>> >> Yes, I made a bash script to stop the servers that are mentioned in >>>>> the >>>>> >> installation tutorial from the openmeetings site: >>>>> >> sudo /etc/init.d/mysql stop >>>>> >> sudo /etc/init.d/coturn stop >>>>> >> sudo /etc/init.d/docker stop >>>>> >> sudo docker stop kms >>>>> >> sudo /etc/init.d/tomcat34 stop >>>>> >> >>>>> >> This is the first time I've had a VPS, set it up and installed >>>>> OpenMeetings >>>>> >> on it, so I have no idea about how to change the ports in OM, nor >>>>> which >>>>> >> component determines the port. >>>>> >> I just followed the tutorial, which I assumed was following best >>>>> practices, >>>>> >> since it is linked to from OpenMeetings. >>>>> >> >>>>> >> Regards, >>>>> >> Lee >>>>> >> >>>>> >> On Tue, Aug 31, 2021 at 10:40 PM seba.wag...@gmail.com < >>>>> >> seba.wag...@gmail.com> wrote: >>>>> >> >>>>> >>> Are you sure that you have stopped and restarted all servers before >>>>> >>> changing the template ? >>>&g
Re: How to change email templates?
Hello Maxim, Please read my original message so there is no chatter from the top till now. My question was just a simple request back then, about only one thing. Thanks. On Thu, Sep 2, 2021 at 5:48 AM Lee But wrote: > Hello Maxim, > This one, the one that was sent when I as admin registered a new user to > test with, which received this email: > > [image: image.png] > Should I register the user@openmeetings.apache.org address as a user so > you can see the email directly? > > > On Thu, Sep 2, 2021 at 4:21 AM Maxim Solodovnik > wrote: > >> >> >> On Thu, 2 Sept 2021 at 11:16, Lee But >> wrote: >> >>> @maxim, >>> >>> Probably. In the configuration it is the same as the key: >>> application.base.url >>> Which directory is that template in, so I can amend it? >>> >> >> now I'm totally lost in this conversation :( >> I thought we still talking about registration template >> And you did some changes to it already >> >> What template would you like to change? >> >> >>> Thanks, >>> Lee >>> >>> On Wed, Sep 1, 2021 at 2:06 PM Maxim Solodovnik >>> wrote: >>> >>>> >>>> >>>> On Wed, 1 Sept 2021 at 16:31, Lee But >>>> wrote: >>>> >>>>> @maxim, the email sent after admin creating a user is this one, which >>>>> is why we had the discussion about creating a template before: >>>>> [image: image.png] >>>>> >>>> >>>> forgot about it :( >>>> So it seems the only change required is to add "Server URL" to the >>>> template? :)) >>>> >>>> >>>> >>>>> @Denis, thanks Denis. Yes, I followed Alvaro's tutorial for Debian 10. >>>>> OM is installed on a VPS with Debian 10. All the required servers were >>>>> installed with OM. >>>>> >>>>> @alvaro, I do not see your message in the thread, even when expanded, >>>>> so I can't get the attachment. I saw your message on what was posted with >>>>> @Denis's response. >>>>> The instructions in the tutorial use sudo to start the servers, so I >>>>> did the same in the script, I'll look into the stop sequence. Thanks for >>>>> that. >>>>> [image: image.png] >>>>> >>>>> Thank you all for your help, >>>>> Lee >>>>> >>>>> >>>>> >>>>> On Wed, Sep 1, 2021 at 7:16 AM Denis Noctor >>>>> wrote: >>>>> >>>>>> Exactly. >>>>>> >>>>>> Sent from my iPhone >>>>>> >>>>>> > On Sep 1, 2021, at 2:12 AM, Alvaro wrote: >>>>>> > >>>>>> > Hello Lee, >>>>>> > >>>>>> > That script to stop all servers will not work. >>>>>> > KMS must be stopped before docker, and without >>>>>> > sudo for any server. >>>>>> > >>>>>> > Please take a look the attached script >>>>>> > called "stop_todo", >>>>>> > >>>>>> > ...and save the order of the servers stop. >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > On Wed, 1 Sep 2021 01:27:10 + >>>>>> > Lee But wrote: >>>>>> > >>>>>> >> Hello Sebastian, >>>>>> >> Thank you for your answers. >>>>>> >> >>>>>> >> Yes, I made a bash script to stop the servers that are mentioned >>>>>> in the >>>>>> >> installation tutorial from the openmeetings site: >>>>>> >> sudo /etc/init.d/mysql stop >>>>>> >> sudo /etc/init.d/coturn stop >>>>>> >> sudo /etc/init.d/docker stop >>>>>> >> sudo docker stop kms >>>>>> >> sudo /etc/init.d/tomcat34 stop >>>>>> >> >>>>>> >> This is the first time I've had a VPS, set it up and installed >>>>>> OpenMeetings >>>>>> >> on it, so I have no idea about how to change the ports in OM, nor >>>>>> which >>>>>> >> component determines the port.
Some uploads - error converting - file not found
Hello, Some but not all PDFs and PPTXs fail conversion with this error: process: convert PDF to images command: /usr/bin/convert -density 150 -define pdf:use-cropbox=true /opt/om_data/upload/files/a6290a0d-34bf-4f9b-aafc-a8cdb5cc6955/a6290a0d-34bf-4f9b-aafc-a8cdb5cc6955.pdf +profile '*' -quality 90 /opt/om_data/upload/files/a6290a0d-34bf-4f9b-aafc-a8cdb5cc6955/page-%04d.png exception: null error: exitValue: 137 optional: false out: and: process: doJodConvert command: null exception: null error: Document converted successfully exitValue: 0 optional: false out: null 137 process: convert PDF to images command: /usr/bin/convert -density 150 -define pdf:use-cropbox=true /opt/om_data/upload/files/00bf6781-0330-42ff-a6d4-7af03c0801f9/00bf6781-0330-42ff-a6d4-7af03c0801f9.pdf +profile '*' -quality 90 /opt/om_data/upload/files/00bf6781-0330-42ff-a6d4-7af03c0801f9/page-%04d.png exception: null error: exitValue: 137 optional: false out: I've tried re-saving older documents in Libre Office and WPS, but the errors persist.
Re: Some uploads - error converting - file not found
Thanks, Denis. It is probably the number of pages / slides, then. The pptx file sent to me has 96 slides of text points. They duplicated the previous slide for each change instead of using transitions on one slide. It is 488k. Thanks again, Lee On Sat, Sep 4, 2021 at 4:43 AM Denis Noctor wrote: > Here’s my two cents worth on this. As you mentioned “some” I would refrain > from uploading large pdf files... I am referring to files with a large > quantity of pages... which will require more ram. If it is a high quality > layered pdf, I would also suggest flattening it with whatever pdf program > you use before uploading. Many pdf programs also offer the option of saving > a file into individual pages which I then upload into a folder, making it > easier to drag and drop individual pages onto a whiteboard... and as a > result making it easier to give presentations / classes etc especially > if you are adding notes and so on to the whiteboard. > > Regarding PPT files... I would also be mindful of power point files that > contain audio, dynamic text, animations etc. Save them as PDFs before > uploading... as all animations etc are going to be lost when uploading > anyway. > > There are a few additional changes you can make in: > /etc/ImageMagick-6/policy.xml which you would have edited when installing > OM. > > I remember having a similar issue a few years back when testing on a free > tier on AWS before upgrading. > > Hope this helps. > > Denis > > > Sent from my iPhone > > On Sep 3, 2021, at 11:08 PM, Lee But wrote: > > Hello, > > Some but not all PDFs and PPTXs fail conversion with this error: > > process: convert PDF to images command: /usr/bin/convert -density 150 > -define pdf:use-cropbox=true > /opt/om_data/upload/files/a6290a0d-34bf-4f9b-aafc-a8cdb5cc6955/a6290a0d-34bf-4f9b-aafc-a8cdb5cc6955.pdf > +profile '*' -quality 90 > /opt/om_data/upload/files/a6290a0d-34bf-4f9b-aafc-a8cdb5cc6955/page-%04d.png > exception: null error: exitValue: 137 optional: false out: > > and: > > process: doJodConvert command: null exception: null error: Document > converted successfully exitValue: 0 optional: false out: null > 137 process: convert PDF to images command: /usr/bin/convert -density 150 > -define pdf:use-cropbox=true > /opt/om_data/upload/files/00bf6781-0330-42ff-a6d4-7af03c0801f9/00bf6781-0330-42ff-a6d4-7af03c0801f9.pdf > +profile '*' -quality 90 > /opt/om_data/upload/files/00bf6781-0330-42ff-a6d4-7af03c0801f9/page-%04d.png > exception: null error: exitValue: 137 optional: false out: > > I've tried re-saving older documents in Libre Office and WPS, but the > errors persist. > >
Re: Issue with Modal Popups
Maybe the users need to grant permissions on their browser when they log in. On Fri, Sep 3, 2021 at 2:41 PM Jeffry Johnson wrote: > We have an issue with random users where they have issues with any Modal > popup not being allowed. Has anyone seen this issue and have tips on what > we should check? >
Re: Video sharing from a link
@Denis, @Jeffry, Hello, youtube-dl works well on Linux to download YT videos to a local directory. Check the licence before downloading anything from YT. The YouTube Standard licence does not allow third-party distribution. Look for videos with a Creative Commons licence. On Tue, Sep 7, 2021 at 8:03 PM Jeffry Johnson wrote: > I only ask because the business I support this is one of the basin > questions asked by almost all of our trainers. Thank you for the feedback > > On Tue, Sep 7, 2021, 00:25 Maxim Solodovnik wrote: > >> OM has (maybe unofficial) requirement: all users should watch the same >> piece of video >> this requirement is harder to implement for youtube >> ( + now they add more aggressive advertisements) >> >> On Tue, 7 Sept 2021 at 03:21, Denis Noctor wrote: >> >>> No. But you can share a link via the chat box. If I require a YouTube >>> video, I usually use an online video converter, download the video and then >>> reupload it to a folder on OM and then drag and drop etc. >>> >>> Sent from my iPhone >>> >>> > On Sep 6, 2021, at 2:43 PM, Jeffry Johnson >>> wrote: >>> > >>> > Is there a function to share videos from links? Like say a YouTube >>> video or similar on the whiteboard? >>> >> >> >> -- >> Best regards, >> Maxim >> >
Re: video sharing
Hello Ali, When you were helping me a few weeks ago, you loaded a video onto the board, and I could see it. I can't remember if it was already loaded or not, or whether it was because you gave me moderator controls. Regards, Lee On Tue, Sep 7, 2021 at 1:51 PM Ali Alhaidary wrote: > Not in our case, may be because our front end is moodle, but whenever a > student joins after the video has started (does not mater if he exited > or not), he will not be able to watch it until the teacher pause/resume. > > Ali > > On 9/7/21 4:38 PM, Alvaro wrote: > > ...more exactly in my testing: > > > > The third user come in room when is playing > > a video, and see only a image of the video. > > Leave the room, and go in room again. Then > > watch correctly the viseo playing. > > Can leave room many times and every time > > when re-entre in room will watch correctly > > the playing video. > > > > > > --- > > > > > > > > On Tue, 7 Sep 2021 15:04:11 +0200 > > Alvaro wrote: > > > >> ...if the third, four, etc. see only a picture > >> of the video, can leave the room and go in to > >> room again and will watch correctly the video. > >> > >> > >> > >> > >> > >> > >> On Tue, 7 Sep 2021 14:59:26 +0200 > >> Alvaro wrote: > >> > >>> My testing: > >>> > >>> Server in Lan: Ubuntu 18.04 - OM 700 #27 > >>> > >>> Clients (3): FF 91 (Ubuntu 18.04 - FF 91 (Ubuntu 18.04) > >>> - FF 91 (OSx 11.5.2) > >>> > >>> The moderator play a video in whiteboard; the second user > >>> is in the same room and can watch the video; the third > >>> user in room can watch also the video. > >>> > >>> If the third user (for example) go in room when the video is > >>> playing, can watch the video also. > >>> > >>> As Maxim said is needed the steps to reproduce the issue. > >>> > >>> > >>> > >>> > >>> > >>> On Tue, 7 Sep 2021 13:10:17 +0300 > >>> Ali Alhaidary wrote: > >>> > >>>> 1. Teacher joins a room. > >>>> > >>>> 2. Student1 joins the same room. > >>>> > >>>> 3. Teacher starts a video. > >>>> > >>>> 4. The video plays on the whiteboard of the teacher and student1. > >>>> > >>>> 5. Student2, 3, 4... joins the same room, video does not play, only a > >>>> picture of it is displayed. unless the teacher pauses the video and > >>>> starts again. > >>>> > >>>> Ali > >>>> > >>>> > >>>> On 9/7/21 9:10 AM, Maxim Solodovnik wrote: > >>>>> > >>>>> On Tue, 7 Sept 2021 at 10:10, Denis Noctor >>>>> <mailto:denisnoc...@gmail.com>> wrote: > >>>>> > >>>>> The only time I’ve experienced a student not being able to view > a > >>>>> video is when they’ve entered a room after the video has already > >>>>> commenced. > >>>>> > >>>>> > >>>>> All room newcomers should be able to watch WB video > >>>>> please provide steps to reproduce :)) > >>>>> > >>>>> > >>>>> Sent from my iPhone > >>>>> > >>>>> > On Sep 6, 2021, at 10:00 PM, Ali Alhaidary > >>>>> ali.alhaid...@the5stars.org>> > >>>>> wrote: > >>>>> > > >>>>> > It seems that it is not reproducible, closed the jira. > >>>>> > > >>>>> > Ali > >>>>> > > >>>>> >> On 9/7/21 5:04 AM, Ali Alhaidary wrote: > >>>>> >> Thanks, it seems that there is an issue with snapshot 7.0.0 > as > >>>>> it is not playing in clients. > >>>>> >> > >>>>> >> I will create a jira... > >>>>> >> > >>>>> >> Ali > >>>>> >> > >>>>> >>> On 9/6/21 11:43 PM, Denis Noctor wrote: > >>>>> >>> It will play on their screen alright but can only be > initiated > >>>>> / controlled by the moderator. However enabling presenter tool > to > >>>>> students will give them access to the video controls also. Would > >>>>> love to see a volume slider added as video and audio files are > >>>>> much louder and sometimes catch students by surprise :) > >>>>> >>> > >>>>> >>> All the best, > >>>>> >>> > >>>>> >>> Denis > >>>>> >>> > >>>>> >>> Sent from my iPhone > >>>>> >>> > >>>>> >>>> On Sep 6, 2021, at 11:55 AM, Ali Alhaidary > >>>>> ali.alhaid...@the5stars.org>> > >>>>> wrote: > >>>>> >>>> > >>>>> >>>> Hi, > >>>>> >>>> > >>>>> >>>> I do not recall if playing a video (drag it and drop) on > the > >>>>> on the whiteboard is shared with others or not ? > >>>>> >>>> > >>>>> >>>> Ali > >>>>> >>>> > >>>>> > >>>>> > >>>>> > >>>>> -- > >>>>> Best regards, > >>>>> Maxim > >>> > >>> -- > >>> > >> > >> -- > >> > > >
Re: video sharing
Hello Ali, I see. Thank you. :) On Wed, Sep 8, 2021 at 1:35 PM Ali Alhaidary wrote: > Hi Lee, > > The video was loaded after we stared the session, and even if it was > before, we used to know this issue, so we pause/resume the video so that > all participant can see it. > > Ali > On 9/8/21 4:25 PM, Lee But wrote: > > Hello Ali, > When you were helping me a few weeks ago, you loaded a video onto the > board, and I could see it. I can't remember if it was already loaded or > not, or whether it was because you gave me moderator controls. > > Regards, > Lee > > > On Tue, Sep 7, 2021 at 1:51 PM Ali Alhaidary > wrote: > >> Not in our case, may be because our front end is moodle, but whenever a >> student joins after the video has started (does not mater if he exited >> or not), he will not be able to watch it until the teacher pause/resume. >> >> Ali >> >> On 9/7/21 4:38 PM, Alvaro wrote: >> > ...more exactly in my testing: >> > >> > The third user come in room when is playing >> > a video, and see only a image of the video. >> > Leave the room, and go in room again. Then >> > watch correctly the viseo playing. >> > Can leave room many times and every time >> > when re-entre in room will watch correctly >> > the playing video. >> > >> > >> > --- >> > >> > >> > >> > On Tue, 7 Sep 2021 15:04:11 +0200 >> > Alvaro wrote: >> > >> >> ...if the third, four, etc. see only a picture >> >> of the video, can leave the room and go in to >> >> room again and will watch correctly the video. >> >> >> >> >> >> >> >> >> >> >> >> >> >> On Tue, 7 Sep 2021 14:59:26 +0200 >> >> Alvaro wrote: >> >> >> >>> My testing: >> >>> >> >>> Server in Lan: Ubuntu 18.04 - OM 700 #27 >> >>> >> >>> Clients (3): FF 91 (Ubuntu 18.04 - FF 91 (Ubuntu 18.04) >> >>> - FF 91 (OSx 11.5.2) >> >>> >> >>> The moderator play a video in whiteboard; the second user >> >>> is in the same room and can watch the video; the third >> >>> user in room can watch also the video. >> >>> >> >>> If the third user (for example) go in room when the video is >> >>> playing, can watch the video also. >> >>> >> >>> As Maxim said is needed the steps to reproduce the issue. >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> On Tue, 7 Sep 2021 13:10:17 +0300 >> >>> Ali Alhaidary wrote: >> >>> >> >>>> 1. Teacher joins a room. >> >>>> >> >>>> 2. Student1 joins the same room. >> >>>> >> >>>> 3. Teacher starts a video. >> >>>> >> >>>> 4. The video plays on the whiteboard of the teacher and student1. >> >>>> >> >>>> 5. Student2, 3, 4... joins the same room, video does not play, only a >> >>>> picture of it is displayed. unless the teacher pauses the video and >> >>>> starts again. >> >>>> >> >>>> Ali >> >>>> >> >>>> >> >>>> On 9/7/21 9:10 AM, Maxim Solodovnik wrote: >> >>>>> >> >>>>> On Tue, 7 Sept 2021 at 10:10, Denis Noctor > >>>>> <mailto:denisnoc...@gmail.com>> wrote: >> >>>>> >> >>>>> The only time I’ve experienced a student not being able to >> view a >> >>>>> video is when they’ve entered a room after the video has >> already >> >>>>> commenced. >> >>>>> >> >>>>> >> >>>>> All room newcomers should be able to watch WB video >> >>>>> please provide steps to reproduce :)) >> >>>>> >> >>>>> >> >>>>> Sent from my iPhone >> >>>>> >> >>>>> > On Sep 6, 2021, at 10:00 PM, Ali Alhaidary >> >>>>> > ali.alhaid...@the5stars.org>> >> >>>>> wrote: >> >>>>> > >> >>>>> > It seems that it is not reproducible, closed the jira. >> >>>>> > >> >>>>> > Ali >> >>>>> > >> >>>>> >> On 9/7/21 5:04 AM, Ali Alhaidary wrote: >> >>>>> >> Thanks, it seems that there is an issue with snapshot 7.0.0 >> as >> >>>>> it is not playing in clients. >> >>>>> >> >> >>>>> >> I will create a jira... >> >>>>> >> >> >>>>> >> Ali >> >>>>> >> >> >>>>> >>> On 9/6/21 11:43 PM, Denis Noctor wrote: >> >>>>> >>> It will play on their screen alright but can only be >> initiated >> >>>>> / controlled by the moderator. However enabling presenter tool >> to >> >>>>> students will give them access to the video controls also. >> Would >> >>>>> love to see a volume slider added as video and audio files are >> >>>>> much louder and sometimes catch students by surprise :) >> >>>>> >>> >> >>>>> >>> All the best, >> >>>>> >>> >> >>>>> >>> Denis >> >>>>> >>> >> >>>>> >>> Sent from my iPhone >> >>>>> >>> >> >>>>> >>>> On Sep 6, 2021, at 11:55 AM, Ali Alhaidary >> >>>>> > ali.alhaid...@the5stars.org>> >> >>>>> wrote: >> >>>>> >>>> >> >>>>> >>>> Hi, >> >>>>> >>>> >> >>>>> >>>> I do not recall if playing a video (drag it and drop) on >> the >> >>>>> on the whiteboard is shared with others or not ? >> >>>>> >>>> >> >>>>> >>>> Ali >> >>>>> >>>> >> >>>>> >> >>>>> >> >>>>> >> >>>>> -- >> >>>>> Best regards, >> >>>>> Maxim >> >>> >> >>> -- >> >>> >> >> >> >> -- >> >> >> > >> >
Re: Registering on behalf of users - no confirmation email
I was just thinking; does the template need a line with the temporary password in it? *Your temporary password is . You should change it when you complete your registration.* On Thu, Aug 26, 2021 at 8:39 AM Ali Alhaidary wrote: > > On 8/26/21 8:46 AM, Maxim Solodovnik wrote: > > I would call it: security issue :) > IMO such destructive action like purging user should be very much secured > > > Admins periodically review user list and remove old, not fully registered > or not verified users. Also, a user needs to remove his contact > information if the application keeps interacting with him by email for > example, however, OM does not do that. > > > On Thu, 26 Aug 2021 at 12:44, Lee But > wrote: > >> Isn't there a way to send an ID key in the invitation email that can >> automatically remove the record that matches the key. Or, match the email >> address? >> >> On Thu, Aug 26, 2021 at 5:36 AM Maxim Solodovnik >> wrote: >> >>> >>> >>> On Thu, 26 Aug 2021 at 12:18, Lee But >>> wrote: >>> >>>> Hello Maxim, >>>> >>>> The is just to point to the website that >>>> openmeetings is on so that the user can recognise it. Example, Maxim >>>> Solodonvik at www.openmeetings.apache.org has invited you to join >>>> their online meeting room(s). >>>> Perhaps, it would be better if the admin could create an 'organisation >>>> name' and have that in the invitation instead. >>>> >>>> The , would point directly to a page to change the password and >>>> complete registration. >>>> >>> >>> Well >>> Actually both URLs will be >>> https://om.alteametasoft.com/openmeetings/signin >>> This is why I'm asking :) >>> >>> >>>> What I mean by 'deregister' is to remove the information that the admin >>>> created: names, password and email address. That may not be clear. >>>> >>>> I suppose it could read, 'If you have received this invitation in error >>>> or do not wish to join the meeting room(s), please *click here* to >>>> deregister your information shown in this email.' >>>> >>> >>> As I wrote before >>> this is impossible without successful login >>> which impossible without "change the password and complete registration" >>> So the footer looks useless to me :( >>> >>> >>>> >>>> On Thu, Aug 26, 2021 at 4:59 AM Maxim Solodovnik >>>> wrote: >>>> >>>>> Thanks for the templates :) >>>>> >>>>> I'll do the following: >>>>> >>>>> 1) will create the key `send.invite.to.user.created.by.admin` >>>>> 2) will use "Formal version" to create the template >>>>> (you can modify it any time as described here >>>>> https://openmeetings.apache.org/EditTemplates.html) >>>>> >>>>> Couple of questions: >>>>> 1) why do we need both "" and ""? >>>>> 2) why do we need this "If you have received this invitation in error, >>>>> please *click here* to deregister." footer? the only way to >>>>> de-register is to complete registration then to delete themselves >>>>> >>>>> >>>>> On Wed, 25 Aug 2021 at 20:39, Ali Alhaidary < >>>>> ali.alhaid...@the5stars.org> wrote: >>>>> >>>>>> Nice :-) >>>>>> >>>>>> Ali >>>>>> On 8/25/21 3:07 PM, Lee But wrote: >>>>>> >>>>>> Hello Maxim, >>>>>> >>>>>> Here are two templates. One is formal, the other informal. I think it >>>>>> would be useful for admins to view default templates and create their own >>>>>> invitations as well. >>>>>> possible keys could be: >>>>>> >>>>>> send.formal.invite.to.user.created.by.admin >>>>>> send.casual.invite.to.user.created.by.admin >>>>>> send.custom.invite.to.user.created.by.admin >>>>>> >>>>>> In the examples below, the name order could be swapped according to >>>>>> the language being used. >>>>>> >>>>>> * >>>>>> Formal version >>>>>> >>>>>> * >>>>>>
How do remote users connect to localhost?
Hello, I think it's working on localhost (installed okay), but how do remote users logo on to my room? The generated URL is for localhost:5080, but when I replace localhost with my IP address, there is no connection. Thanks, Lee.
Re: How do remote users connect to localhost?
Hello Alvaro, Adding the IP address blocked myself from accessing the rooms. 'Missing' errors when the first page loads. I think there are still problems because when I double click Red5.bat, there are errors of omitted common frames, whatever they are. Thanks anyway. On Thu, Aug 22, 2013 at 5:40 PM, Alvaro zurca...@gmail.com wrote: Hi Lee, In your installation path edit the file config.xml: gedit /opt/red5211/webapps/openmeetings/config.xml ...and about the line 35 change: rtmphostlocal/rtmphostlocal to rtmphostlocalYOUR-SERVER_IP/rtmphostlocal ...and restart. Regards Alvaro El jue, 22-08-2013 a las 16:33 +0100, Lee Saunders escribió: Hello, I think it's working on localhost (installed okay), but how do remote users logo on to my room? The generated URL is for localhost:5080, but when I replace localhost with my IP address, there is no connection. Thanks, Lee.
Re: How do remote users connect to localhost?
Does this actually work on Windows 7 (x64)? I've spent all day on this 3-step install. After adding the connector into the lib folder for My SQL, nothing works. Tomcat error 'HTTP 500'. - Red5 startup - ... 36 common frames omitted Caused by: java.lang.ClassNotFoundException: com.mysql.jdbc.Driver at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoa der.java:1714) ~[tomcat-embed-core-jar-7.0.34.jar:7.0.34] at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoa der.java:1559) ~[tomcat-embed-core-jar-7.0.34.jar:7.0.34] at org.apache.commons.dbcp.BasicDataSource.createConnectionFactory(Basic DataSource.java:1420) ~[commons-dbcp-jar-1.4.jar:1.4] ... 41 common frames omitted -- Could someone please direct me to clear instructions on how to install this thing? Thank you, Lee. On Thu, Aug 22, 2013 at 5:40 PM, Alvaro zurca...@gmail.com wrote: Hi Lee, In your installation path edit the file config.xml: gedit /opt/red5211/webapps/openmeetings/config.xml ...and about the line 35 change: rtmphostlocal/rtmphostlocal to rtmphostlocalYOUR-SERVER_IP/rtmphostlocal ...and restart. Regards Alvaro El jue, 22-08-2013 a las 16:33 +0100, Lee Saunders escribió: Hello, I think it's working on localhost (installed okay), but how do remote users logo on to my room? The generated URL is for localhost:5080, but when I replace localhost with my IP address, there is no connection. Thanks, Lee.
Re: Default Time Zone in the Invite
I could find the default time zone in Administration Configuration Number 30 in the list. There is no selection box to change it though. On Thu, Aug 22, 2013 at 9:46 PM, John Tran findingj...@gmail.com wrote: Does one know how to change or where to go to change the default timezone shown in the invitation popup. Somewhere in archive someone said moving the intended timzone to the top of the list in /usr/lib/red5/webapps/openmeetings/languages/timezones.xml worked for them. It didn't work for me when I tried it, even when I changed the orderId to 0 -- -john-
Re: Default Time Zone in the Invite
Go here: \webapps\openmeetings\languages\timezones.xml. You can change the order in that. On Fri, Aug 23, 2013 at 12:04 AM, Lee Saunders leesenglishless...@gmail.com wrote: I could find the default time zone in Administration Configuration Number 30 in the list. There is no selection box to change it though. On Thu, Aug 22, 2013 at 9:46 PM, John Tran findingj...@gmail.com wrote: Does one know how to change or where to go to change the default timezone shown in the invitation popup. Somewhere in archive someone said moving the intended timzone to the top of the list in /usr/lib/red5/webapps/openmeetings/languages/timezones.xml worked for them. It didn't work for me when I tried it, even when I changed the orderId to 0 -- -john-
Re: How do remote users connect to localhost?
Thank you for helping. It's confusing me, though. There is the IP address that is visible to the Internet, then my computer has an IP address to the router. When I use the Internet visible IP address:5080, nothing happens. So, I guess I need to get access to the local IP address as well from the Internet. On Fri, Aug 23, 2013 at 4:36 AM, Maxim Solodovnik solomax...@gmail.comwrote: This seems to be firewall issue. please access OM running and use you _external_ IP/hostname instead of localhost. Everything should work as expected On Thu, Aug 22, 2013 at 10:33 PM, Lee Saunders leesenglishless...@gmail.com wrote: Hello, I think it's working on localhost (installed okay), but how do remote users logo on to my room? The generated URL is for localhost:5080, but when I replace localhost with my IP address, there is no connection. Thanks, Lee. -- WBR Maxim aka solomax
Re: How do remote users connect to localhost?
With firewall disabled, still no remote access. I am trying to connect with http://myip:5080/openmeetings On Fri, Aug 23, 2013 at 10:37 AM, Lee Saunders leesenglishless...@gmail.com wrote: Thank you for helping. It's confusing me, though. There is the IP address that is visible to the Internet, then my computer has an IP address to the router. When I use the Internet visible IP address:5080, nothing happens. So, I guess I need to get access to the local IP address as well from the Internet. On Fri, Aug 23, 2013 at 4:36 AM, Maxim Solodovnik solomax...@gmail.comwrote: This seems to be firewall issue. please access OM running and use you _external_ IP/hostname instead of localhost. Everything should work as expected On Thu, Aug 22, 2013 at 10:33 PM, Lee Saunders leesenglishless...@gmail.com wrote: Hello, I think it's working on localhost (installed okay), but how do remote users logo on to my room? The generated URL is for localhost:5080, but when I replace localhost with my IP address, there is no connection. Thanks, Lee. -- WBR Maxim aka solomax
Re: Unable to install on Win 7 x64
Hello Maxim, Thanks for that. That was the first zip file I tried installing. When I add the connector (msi file) and run it in the WEB-INF/lib folder, no new files appear. After removing the 'persistence' file and renaming 'mysql_persistence' to 'persistence', and changing the root and password, all I get is a HTTP 500 error: java.lang.NullPointerException org.apache.velocity.tools.view.VelocityView.performMerge(VelocityView.java:942) org.apache.velocity.tools.view.VelocityView.merge(VelocityView.java:902) org.apache.velocity.tools.view.VelocityViewServlet.mergeTemplate(VelocityViewServlet.java:318) org.apache.velocity.tools.view.VelocityViewServlet.doRequest(VelocityViewServlet.java:220) org.apache.velocity.tools.view.VelocityViewServlet.doGet(VelocityViewServlet.java:182) javax.servlet.http.HttpServlet.service(HttpServlet.java:621) javax.servlet.http.HttpServlet.service(HttpServlet.java:728) org.red5.logging.LoggerContextFilter.doFilter(LoggerContextFilter.java:77) . Regarding remote access, I still haven't go a clue. I set forwarding '5080' from my router to my network IP address (static), so I thought that might direct http://myip:5080/openminutes to my Open Meetings installation. It seems that is not the case. So confusing. I will try one more time from scratch. I thought the 3 steps, that are not actually 3 steps, were going to be less time consuming that this. Thanks anyway, Lee. On Fri, Aug 23, 2013 at 4:34 AM, Maxim Solodovnik solomax...@gmail.comwrote: Here is the link to the precompiled binaries http://www.apache.org/dyn/closer.cgi/openmeetings/2.1.1/bin/apache-openmeetings-2.1.1.zip you need to add MySQL driver download from here http://dev.mysql.com/downloads/connector/j/ extract jar file into webapps/openmeetings/WEB-INF/lib and run no need to compile :) according to your 3-step error: BindException: Address already in use: JVM_Bind /0.0.0.0:5080 It seems like you already have OM process started please ensure there are no java processes running before starting red5.bat On Thu, Aug 22, 2013 at 8:13 PM, Lee Saunders leesenglishless...@gmail.com wrote: I've had no success installing Open Minutes on my own PC. I need to upload PDF files. I followed the instructions in this tutorial: https://cwiki.apache.org/confluence/download/attachments/27838216/Installing+OM2.x+On+Windows-XP-7-2003.pdf?version=1modificationDate=1360911123000, but got a BUILD FAILED error for Red 5 and setting it for MYSQL. I also tried the 3-step zip file, thinking that would be easier. Here's the output when I double click Red5.bat after extracting the the Zipped binary file (the second step). There are a lot of omitted errors: -- [INFO] [0.0.0.0-startStop-1] org.apache.wicket.RequestListenerInterface - regist ered listener interface [RequestListenerInterface name=IBehaviorListener, method =public abstract void org.apache.wicket.behavior.IBehaviorListener.onRequest()] [INFO] [0.0.0.0-startStop-1] org.apache.wicket.RequestListenerInterface - regist ered listener interface [RequestListenerInterface name=IFormSubmitListener, meth od=public abstract void org.apache.wicket.markup.html.form.IFormSubmitListener.o nFormSubmitted()] [INFO] [0.0.0.0-startStop-1] org.apache.wicket.RequestListenerInterface - regist ered listener interface [RequestListenerInterface name=ILinkListener, method=pub lic abstract void org.apache.wicket.markup.html.link.ILinkListener.onLinkClicked ()] [INFO] [0.0.0.0-startStop-1] org.apache.wicket.RequestListenerInterface - regist ered listener interface [RequestListenerInterface name=IOnChangeListener, method =public abstract void org.apache.wicket.markup.html.form.IOnChangeListener.onSel ectionChanged()] [INFO] [0.0.0.0-startStop-1] org.apache.wicket.RequestListenerInterface - regist ered listener interface [RequestListenerInterface name=IRedirectListener, method =public abstract void org.apache.wicket.IRedirectListener.onRedirect()] [INFO] [0.0.0.0-startStop-1] org.apache.wicket.RequestListenerInterface - regist ered listener interface [RequestListenerInterface name=IResourceListener, method =public abstract void org.apache.wicket.IResourceListener.onResourceRequested()] [INFO] [0.0.0.0-startStop-1] org.apache.wicket.Application - [OpenmeetingsApplic ation] init: Wicket extensions initializer [INFO] [0.0.0.0-startStop-1] org.apache.wicket.protocol.http.WebApplication - [O penmeetingsApplication] Started Wicket version 6.6.0 in DEPLOYMENT mode [INFO] [0.0.0.0-startStop-1] org.apache.axis2.deployment.ClusterBuilder - Cluste ring has been disabled [INFO] [0.0.0.0-startStop-1] org.apache.axis2.deployment.DeploymentEngine - No m odules directory was found under C:\OpenMeetings\webapps\openmeetings\WEB-INF. [INFO] [0.0.0.0-startStop-1] org.apache.axis2.deployment.ModuleDeployer - Deploy ing module: addressing-1.7.0-SNAPSHOT - file:/C:/OpenMeetings
Re: Screensharing seems to be fixed
I hope it works, I need to be able to record the whiteboard sessions for my students to review. On Sat, Aug 24, 2013 at 8:33 AM, Maxim Solodovnik solomax...@gmail.comwrote: not sure, haven't tested it On Fri, Aug 23, 2013 at 7:24 PM, Alexei Fedotov alexei.fedo...@gmail.comwrote: Does red5sip still work with openmeetings when this red5 version is used? -- With best regards / с наилучшими пожеланиями, Alexei Fedotov / Алексей Федотов, http://dataved.ru/ +7 916 562 8095 [1] Start using Apache Openmeetings today, http://openmeetings.apache.org/ [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/ [3] Join Alexei Fedotov @facebook, http://www.facebook.com/openmeetings On Fri, Aug 23, 2013 at 8:44 AM, Maxim Solodovnik solomax...@gmail.com wrote: 2.1.1 have no such issue, it uses another red5 version On Wed, Aug 21, 2013 at 12:26 AM, Bakko asannu...@gmail.com wrote: The same problem are fixed on 2.1.1? Regards El 20/08/2013 12:14, Alexei Fedotov escribió: cool -- With best regards / с наилучшими пожеланиями, Alexei Fedotov / Алексей Федотов, http://dataved.ru/ +7 916 562 8095 [1] Start using Apache Openmeetings today, http://openmeetings.apache.org/ [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/ [3] Join Alexei Fedotov @facebook, http://www.facebook.com/openmeetings On Tue, Aug 20, 2013 at 9:10 PM, Maxim Solodovnik solomax...@gmail.com wrote: subj. URL: http://svn.apache.org/r1515875 Log: [OPENMEETINGS-679] red5 version is downgraded, screen sharing seems to work as expected I hope screensharing applet will work as expected in 3.0.0 since this revision -- WBR Maxim aka solomax -- WBR Maxim aka solomax -- WBR Maxim aka solomax
Office document upload failed
I always get a big 'DELETED' box when I try to add office documents, such as .doc. PDFs work okay. I have the Libre Office.path set to 'C:\Program Files (x86)\LibreOffice 4'. Do I need to extend the document tree further? My paths in the settings list are set as follows: sox_path - C:\Program Files (x86)\sox-14-4-1 swftools_path - C:\Program Files (x86)\SWFTools imagemagick_path - C:\Program Files\ImageMagick-6.8.6-Q16 ffmpeg_path - C:\ffmpeg\bin jod.path - C:\classes\webapps\openmeetings\jodconverter-core-3.0-beta-4\lib Java - C:\Program Files\Java\jre7\bin
Re: Screensharing seems to be fixed
Screenrecording works on my computer. There was a Java problem, but that seems to have gone. Is there a way to record audio and the screen at the same time? On Sat, Aug 24, 2013 at 10:45 AM, Lee Saunders leesenglishless...@gmail.com wrote: I hope it works, I need to be able to record the whiteboard sessions for my students to review. On Sat, Aug 24, 2013 at 8:33 AM, Maxim Solodovnik solomax...@gmail.comwrote: not sure, haven't tested it On Fri, Aug 23, 2013 at 7:24 PM, Alexei Fedotov alexei.fedo...@gmail.com wrote: Does red5sip still work with openmeetings when this red5 version is used? -- With best regards / с наилучшими пожеланиями, Alexei Fedotov / Алексей Федотов, http://dataved.ru/ +7 916 562 8095 [1] Start using Apache Openmeetings today, http://openmeetings.apache.org/ [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/ [3] Join Alexei Fedotov @facebook, http://www.facebook.com/openmeetings On Fri, Aug 23, 2013 at 8:44 AM, Maxim Solodovnik solomax...@gmail.com wrote: 2.1.1 have no such issue, it uses another red5 version On Wed, Aug 21, 2013 at 12:26 AM, Bakko asannu...@gmail.com wrote: The same problem are fixed on 2.1.1? Regards El 20/08/2013 12:14, Alexei Fedotov escribió: cool -- With best regards / с наилучшими пожеланиями, Alexei Fedotov / Алексей Федотов, http://dataved.ru/ +7 916 562 8095 [1] Start using Apache Openmeetings today, http://openmeetings.apache.org/ [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/ [3] Join Alexei Fedotov @facebook, http://www.facebook.com/openmeetings On Tue, Aug 20, 2013 at 9:10 PM, Maxim Solodovnik solomax...@gmail.com wrote: subj. URL: http://svn.apache.org/r1515875 Log: [OPENMEETINGS-679] red5 version is downgraded, screen sharing seems to work as expected I hope screensharing applet will work as expected in 3.0.0 since this revision -- WBR Maxim aka solomax -- WBR Maxim aka solomax -- WBR Maxim aka solomax
FFMPEG recording error
Hello, I installed the latest version of FFMPEG. I tried the interview room, but got an FFMPEG error: -- Log:24.08.2013 14:19:58 generateFFMPEG process: generateImageSequence command; [C:\ffmpeg\bin\ffmpeg, -i, C:\classes\webapps\openmeetings\streams\1\rec_6_stream_4_2013_08_24_14_19_00.flv, -r, 25, -s, 320x240, C:\classes\webapps\openmeetings\streams\1\7\image%d.png] exception: null error: ffmpeg version N-55644-g68b63a3 Copyright (c) 2000-2013 the FFmpeg developers built on Aug 19 2013 20:32:00 with gcc 4.7.3 (GCC) configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetype --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable-libxvid --enable-zlib libavutil 52. 42.100 / 52. 42.100 libavcodec 55. 28.100 / 55. 28.100 libavformat55. 13.103 / 55. 13.103 libavdevice55. 3.100 / 55. 3.100 libavfilter 3. 82.100 / 3. 82.100 libswscale 2. 5.100 / 2. 5.100 libswresample 0. 17.103 / 0. 17.103 libpostproc52. 3.100 / 52. 3.100 [h264 @ 0286f140] no frame! Last message repeated 110 times [h264 @ 0286f140] slice type too large (24) at 0 0 [h264 @ 0286f140] decode_slice_header error [h264 @ 0286f140] no frame! Last message repeated 17 times [flv @ 0286a880] decoding for stream 0 failed [flv @ 0286a880] Could not find codec parameters for stream 0 (Video: h264, 195 kb/s): unspecified size Consider increasing the value for the 'analyzeduration' and 'probesize' options Input #0, flv, from 'C:\classes\webapps\openmeetings\streams\1\rec_6_stream_4_2013_08_24_14_19_00.flv': Metadata: server : Red5 Server 1.0.0 RC3 Rev: 4393 creationdate: Sat Aug 24 14:19:21 BST 2013 canSeekToEnd: true Duration: 00:00:20.81, start: 0.00, bitrate: 245 kb/s Stream #0:0: Video: h264, 195 kb/s, 1k tbr, 1k tbn, 2k tbc Stream #0:1: Audio: nellymoser, 22050 Hz, mono, flt, 44 kb/s Output #0, image2, to 'C:\classes\webapps\openmeetings\streams\1\7\image%d.png': Metadata: server : Red5 Server 1.0.0 RC3 Rev: 4393 creationdate: Sat Aug 24 14:19:21 BST 2013 canSeekToEnd: true Output file #0 does not contain any stream exitValue: null out: - Any ideas about this? Thank you.
Re: Office document upload failed
Not supported. Oh, what does it use instead to convert office docs? On Sat, Aug 24, 2013 at 4:22 PM, Maxim Solodovnik solomax...@gmail.comwrote: you need to examine openmeetings.log to get the exact error due to jodconverter is not supported anymore you can try to install earlier versions of OpenOffice/LibreOffice. On Sat, Aug 24, 2013 at 6:36 PM, Lee Saunders leesenglishless...@gmail.com wrote: I always get a big 'DELETED' box when I try to add office documents, such as .doc. PDFs work okay. I have the Libre Office.path set to 'C:\Program Files (x86)\LibreOffice 4'. Do I need to extend the document tree further? My paths in the settings list are set as follows: sox_path - C:\Program Files (x86)\sox-14-4-1 swftools_path - C:\Program Files (x86)\SWFTools imagemagick_path - C:\Program Files\ImageMagick-6.8.6-Q16 ffmpeg_path - C:\ffmpeg\bin jod.path - C:\classes\webapps\openmeetings\jodconverter-core-3.0-beta-4\lib Java - C:\Program Files\Java\jre7\bin -- WBR Maxim aka solomax
Re: FFMPEG recording error
Thanks Maxim, All of this is new to me, so thank you for your patience. On Sat, Aug 24, 2013 at 4:27 PM, Maxim Solodovnik solomax...@gmail.comwrote: you have incomplete h264 support I believe you should google it On Sat, Aug 24, 2013 at 9:25 PM, Lee Saunders leesenglishless...@gmail.com wrote: Hello, I installed the latest version of FFMPEG. I tried the interview room, but got an FFMPEG error: -- Log:24.08.2013 14:19:58 generateFFMPEG process: generateImageSequence command; [C:\ffmpeg\bin\ffmpeg, -i, C:\classes\webapps\openmeetings\streams\1\rec_6_stream_4_2013_08_24_14_19_00.flv, -r, 25, -s, 320x240, C:\classes\webapps\openmeetings\streams\1\7\image%d.png] exception: null error: ffmpeg version N-55644-g68b63a3 Copyright (c) 2000-2013 the FFmpeg developers built on Aug 19 2013 20:32:00 with gcc 4.7.3 (GCC) configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetype --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable-libxvid --enable-zlib libavutil 52. 42.100 / 52. 42.100 libavcodec 55. 28.100 / 55. 28.100 libavformat55. 13.103 / 55. 13.103 libavdevice55. 3.100 / 55. 3.100 libavfilter 3. 82.100 / 3. 82.100 libswscale 2. 5.100 / 2. 5.100 libswresample 0. 17.103 / 0. 17.103 libpostproc52. 3.100 / 52. 3.100 [h264 @ 0286f140] no frame! Last message repeated 110 times [h264 @ 0286f140] slice type too large (24) at 0 0 [h264 @ 0286f140] decode_slice_header error [h264 @ 0286f140] no frame! Last message repeated 17 times [flv @ 0286a880] decoding for stream 0 failed [flv @ 0286a880] Could not find codec parameters for stream 0 (Video: h264, 195 kb/s): unspecified size Consider increasing the value for the 'analyzeduration' and 'probesize' options Input #0, flv, from 'C:\classes\webapps\openmeetings\streams\1\rec_6_stream_4_2013_08_24_14_19_00.flv': Metadata: server : Red5 Server 1.0.0 RC3 Rev: 4393 creationdate: Sat Aug 24 14:19:21 BST 2013 canSeekToEnd: true Duration: 00:00:20.81, start: 0.00, bitrate: 245 kb/s Stream #0:0: Video: h264, 195 kb/s, 1k tbr, 1k tbn, 2k tbc Stream #0:1: Audio: nellymoser, 22050 Hz, mono, flt, 44 kb/s Output #0, image2, to 'C:\classes\webapps\openmeetings\streams\1\7\image%d.png': Metadata: server : Red5 Server 1.0.0 RC3 Rev: 4393 creationdate: Sat Aug 24 14:19:21 BST 2013 canSeekToEnd: true Output file #0 does not contain any stream exitValue: null out: - Any ideas about this? Thank you. -- WBR Maxim aka solomax
Re: How do remote users connect to localhost?
I forwarded 1935, and now I can log in. As people can access ports, can they explore/damage my computer? On Sat, Aug 24, 2013 at 4:20 PM, Maxim Solodovnik solomax...@gmail.comwrote: try 1, 2, 3 means you have ports 1935 and 8088 closed On Sat, Aug 24, 2013 at 4:44 PM, Lee Saunders leesenglishless...@gmail.com wrote: I used NETSTAT to figure out what was opening what ports. Uninstalling ASUS Remote Go! service opened 5080 on TCP. PFPortchecker was able to send the packet. I can access Open Meetings from another machine within the same network using 192.168.0.8:5080, which automatically redirects to the openminutes folder and loads. When I try the same thing from the Internet, the page attempts to load (I see Try 1, Try 2...), but ends with missing components on the screen where the log in box is. It seems I have the connection to open minutes, but some parts are not being served. I feel as if it is almost there, just one or two things to adjust. Thanks again, Lee. On Sat, Aug 24, 2013 at 8:36 AM, Maxim Solodovnik solomax...@gmail.comwrote: This is network configuration issue. since you behind router and firewall I belive you should set up traffic forwarding on router and disable firewall. of check the configuration without router first. like connect the OM server from another machine in the same network. On Fri, Aug 23, 2013 at 5:48 PM, Lee Saunders leesenglishless...@gmail.com wrote: With firewall disabled, still no remote access. I am trying to connect with http://myip:5080/openmeetings On Fri, Aug 23, 2013 at 10:37 AM, Lee Saunders leesenglishless...@gmail.com wrote: Thank you for helping. It's confusing me, though. There is the IP address that is visible to the Internet, then my computer has an IP address to the router. When I use the Internet visible IP address:5080, nothing happens. So, I guess I need to get access to the local IP address as well from the Internet. On Fri, Aug 23, 2013 at 4:36 AM, Maxim Solodovnik solomax...@gmail.com wrote: This seems to be firewall issue. please access OM running and use you _external_ IP/hostname instead of localhost. Everything should work as expected On Thu, Aug 22, 2013 at 10:33 PM, Lee Saunders leesenglishless...@gmail.com wrote: Hello, I think it's working on localhost (installed okay), but how do remote users logo on to my room? The generated URL is for localhost:5080, but when I replace localhost with my IP address, there is no connection. Thanks, Lee. -- WBR Maxim aka solomax -- WBR Maxim aka solomax -- WBR Maxim aka solomax
Why don't calendar events expire?
Hello, I tested the calendar, but after the event had ended, the room persisted. Is there a way to terminate the event when the 'Exit' button is clicked rather than delete the event in the calendar and receive a 'Cancelled' message? I think that if an event is terminated before the start or end time, then yes, it is cancelled, but after the end time, a meeting has usually ended. Just a suggestion. All the best, Lee.
Re: Screensharing seems to be fixed
Hello Sebastian, Yes, I hear the audio now (OM 2.1.1). This is very good software once the set up has been figured out. All the best, Lee. On Sun, Aug 25, 2013 at 12:38 AM, seba.wag...@gmail.com seba.wag...@gmail.com wrote: Actually the recording will capture all audio from the conference and mix it into the screensharing? Was this feature removed or is currently not working in the 3.x tree? Thanks, Sebastian 2013/8/25 Maxim Solodovnik solomax...@gmail.com not yet :( the code to implement this is not complete, maybe in future versions it will be implemented On Sat, Aug 24, 2013 at 8:23 PM, Lee Saunders leesenglishless...@gmail.com wrote: Screenrecording works on my computer. There was a Java problem, but that seems to have gone. Is there a way to record audio and the screen at the same time? On Sat, Aug 24, 2013 at 10:45 AM, Lee Saunders leesenglishless...@gmail.com wrote: I hope it works, I need to be able to record the whiteboard sessions for my students to review. On Sat, Aug 24, 2013 at 8:33 AM, Maxim Solodovnik solomax...@gmail.com wrote: not sure, haven't tested it On Fri, Aug 23, 2013 at 7:24 PM, Alexei Fedotov alexei.fedo...@gmail.com wrote: Does red5sip still work with openmeetings when this red5 version is used? -- With best regards / с наилучшими пожеланиями, Alexei Fedotov / Алексей Федотов, http://dataved.ru/ +7 916 562 8095 [1] Start using Apache Openmeetings today, http://openmeetings.apache.org/ [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/ [3] Join Alexei Fedotov @facebook, http://www.facebook.com/openmeetings On Fri, Aug 23, 2013 at 8:44 AM, Maxim Solodovnik solomax...@gmail.com wrote: 2.1.1 have no such issue, it uses another red5 version On Wed, Aug 21, 2013 at 12:26 AM, Bakko asannu...@gmail.com wrote: The same problem are fixed on 2.1.1? Regards El 20/08/2013 12:14, Alexei Fedotov escribió: cool -- With best regards / с наилучшими пожеланиями, Alexei Fedotov / Алексей Федотов, http://dataved.ru/ +7 916 562 8095 [1] Start using Apache Openmeetings today, http://openmeetings.apache.org/ [2] Join Alexei Fedotov @linkedin, http://ru.linkedin.com/in/dataved/ [3] Join Alexei Fedotov @facebook, http://www.facebook.com/openmeetings On Tue, Aug 20, 2013 at 9:10 PM, Maxim Solodovnik solomax...@gmail.com wrote: subj. URL: http://svn.apache.org/r1515875 Log: [OPENMEETINGS-679] red5 version is downgraded, screen sharing seems to work as expected I hope screensharing applet will work as expected in 3.0.0 since this revision -- WBR Maxim aka solomax -- WBR Maxim aka solomax -- WBR Maxim aka solomax -- WBR Maxim aka solomax -- Sebastian Wagner https://twitter.com/#!/dead_lock http://www.webbase-design.de http://www.wagner-sebastian.com seba.wag...@gmail.com
Re: Why don't calendar events expire?
Is it safe for me to delete the sub-folders in the streams directory? On Sun, Aug 25, 2013 at 1:39 AM, Lee Saunders leesenglishless...@gmail.comwrote: Thank you for the technical information. I'm just going my my experience using another system in which each meeting was tied only to the originator and could remain open over any number of sessions, and then closed when complete. Once complete a PDF of the whiteboard and accompanying documentation was created as a soft copy for download, stored in the users account. So, even though the meeting had been closed, a downloadable representation of the meeting was available in an archive. I do see how Open Minutes works differently, though. All in all, Open Meetings is a great service. Thank you for creating it. On Sun, Aug 25, 2013 at 1:27 AM, seba.wag...@gmail.com seba.wag...@gmail.com wrote: We actually never physically delete anything, we just mark/flag as deleted and don't show it in the UI anymore. There are multiple reasons why you do that in software. For instance there are are often foreign key constraints. That means that you can't physically delete an user, cause this userId is a foreign key in some other tables. And by deleting the user physically you would get an inconsistance data model. This will become a real issue when you work with databases that have real foreign keys (postgres, oracle, MySQL InnoDB, et cetera). However even with data on disk in files, just because you can delete those files without throwing any error does not mean that this is a good idea, as for example records in the database still point to that file. By doing that the data model simply becomes inconsistent. Some references are missing, it pretty much gets a mess if you start to delete files. Another reason is that you want to keep track on changes that have happened. This is sometimes a legal requirement in companies and government. You just never delete hard, data must be always possible to be restored. For instance an user xyz claims his important file XXX was deleted at the 28.12.2009, now the sys admins need to recover that file. There are however attempts to have some kind of clean up tasks that delete such references to free up disk space. But if ever implemented it has to be done very carefully and clear to the sys admin that there is no way back, you will loose data and you probably should back up the data before doing it. Bottom line is: Don't delete, just flag as deleted. Sebastian 2013/8/25 Lee Saunders leesenglishless...@gmail.com Ah, I see. I guess that does make sense. I just worry about having a list of rooms that becomes too long to manage. Perhaps then, completed meetings could go into an archive\ completed events section, thus keeping them separate from pending events. I have also noticed that deleted recordings remain in the streams folder (..\webapps\openmeetings\streams\). Why don't they get deleted when moved to trash? All the best, Lee. On Sun, Aug 25, 2013 at 12:49 AM, seba.wag...@gmail.com seba.wag...@gmail.com wrote: Hi Lee, I don't think we should delete the room after a calendar event was terminated. Otherwise for example any uploaded or created data that was part of the conference room itself would be gone. Also you can attach existing rooms to multiple calendar events. So the relationship between room to calendar event is not 1:1. Sebastian 2013/8/25 Lee Saunders leesenglishless...@gmail.com Hello, I tested the calendar, but after the event had ended, the room persisted. Is there a way to terminate the event when the 'Exit' button is clicked rather than delete the event in the calendar and receive a 'Cancelled' message? I think that if an event is terminated before the start or end time, then yes, it is cancelled, but after the end time, a meeting has usually ended. Just a suggestion. All the best, Lee. -- Sebastian Wagner https://twitter.com/#!/dead_lock http://www.webbase-design.de http://www.wagner-sebastian.com seba.wag...@gmail.com -- Sebastian Wagner https://twitter.com/#!/dead_lock http://www.webbase-design.de http://www.wagner-sebastian.com seba.wag...@gmail.com
Re: Why don't calendar events expire?
Hello Jake, Thank you for your help. I think everyone knows more about that than I do. I don't know about programming applications. I learnt some PHP and MySql from books to build an order tracking/customer info database system, and that was it. I did experience a recording issue today. A student left the room and returned, but the recorder didn't record any of their voice after they returned to the room, so only my half was recorded. I'll put that down to experience. I could perhaps learn from the source, thanks. All the best, Lee. On Sun, Aug 25, 2013 at 10:30 PM, Jacob C. Gaiski jgai...@emich.edu wrote: Write a console app that scans the database and removes files after encoding. Though, if there's a corrupt video and the encoded video becomes corrupted, you'll have no fall back if say, a multithreaded random bug happens that causes your ffmpeg to run before the stream had closed. I did all of my conversions with a console application that runs FFMPEG and updates a table every 20s. If you'd like the source that makes it happen I can send it to you. But all in all I'd recommend that you build a console app that reads from a database and changes it accordingly. -Jake On Aug 25, 2013, at 5:03 PM, Lee Saunders leesenglishless...@gmail.com wrote: Maxim, I ran -f, --file, and --cleanup, but that doesn't touch the streams. Those recordings really need to be removed after rendering to AVI. They will simply fill my disc if nothing can be deleted. Every meeting is 1 hour long and recorded, and there is already 6Gb of data in those streams after one day. Please don't think of me as moaning. Open Meetings is a great platform. I am just concerned about filling my disc with redundant data. Is it not possible to GET the user IDs for a roomID and delete the relations to the files so they can be deleted? I think not being able to delete anything, even under a warning, is somewhat restrictive and disc hogging. I understand the concerns about complaints about something later down the line and the need to retrieve data, but that would be the decision of the admin/IT team and management. Besides, there should be a backup of all that data anyway. I guess the only other way around it is to record a 1-second video and audio clip and replace all the files with them. That way the file names will remain intact. It will be time consuming, but better than rendering my disc full and unusable after about 3 months. What does Open Meetings do when a disc is full? All the best, Lee. On Sun, Aug 25, 2013 at 4:43 PM, Maxim Solodovnik solomax...@gmail.comwrote: you can use command line admin for this: -f,--files File operations - statictics/cleanup --cleanup (optional) Should intermediate files be clean up On Sun, Aug 25, 2013 at 2:53 PM, Lee Saunders leesenglishless...@gmail.com wrote: I would like to delete recordings after downloading them to clear disc space. I'm not sure why the 'drag to trash' option is there if the files are not really deleted. I need to remove them somehow as disc space is finite. Thanks, Lee. On Sun, Aug 25, 2013 at 2:32 AM, seba.wag...@gmail.com seba.wag...@gmail.com wrote: Not really. The files in the /streams/hibernate folder are the final videos of the recordings. If you delete them all your recordings are gone. The files in the /streams/$ROOM_ID folders are the raw recording files. Based on those files there is a complete video mixed (that is then produced into the /streams/hibernate folder). Theoretically you can delete the files in the /streams/$ROOM_ID folder as the final mixed video is already produced. However for recordings based on the interview room type, there is a functionality to re-render the raw data but with some parameters to adjust the audio (make it loader, delay the audio, et cetera). Those are useful if you want to post-edit the video from inside OpenMeetings because for instance one participant has a microphone that is a lot loader then some other participant. Once the video is mixed into the final format there would be no way of re-adjusting those settings. So there is some button in the OpenMeetings UI to re-render the raw files with some additional settings. If you delete the files in the /streams/$ROOM_ID folders bascially the UI functionality is pointing to files that do no more exist. Also there are entries in the database that point to the files in the /streams/$ROOM_ID directory. So in general, it would be basically a bad idea to just delete those folders, UI functionality might be broken and the data model would be inconsistent. Sebastian 2013/8/25 Lee Saunders leesenglishless...@gmail.com Is it safe for me to delete the sub-folders in the streams directory? On Sun, Aug 25, 2013 at 1:39 AM, Lee Saunders leesenglishless...@gmail.com wrote: Thank you for the technical information. I'm just
Re: Why don't calendar events expire?
Indeed, Sebastian and Maxim have done a great job, and very generous to keep it Open Source. It was just frustrating to realise I'll have no hard disc left very quickly. On Sun, Aug 25, 2013 at 11:38 PM, Jacob Gaiski jgai...@emich.edu wrote: I think OpenMeetings require a somewhat knowledgable background with Java and running servers on Tomcat/Red5. ** ** ** ** I would recommend that you become familiar with Java the programming language and yes, take a look at the source. If you can get it to compile, publish your version and put in logging functions so that you can better see what it's doing. ** ** ** ** You should also be able to localize it onto a machine and debug it from Eclipse, given you have the right enviroment. I think the one you need is Eclipse Juno. ** ** ** ** Once you have the entire system localized onto your machine, you can attach and remove debug points from anywhere within the source and see exactly what's happening from a server perspective as you execute client code, and also be able to enter your changes accordingly as you need in the code as well. ** ** I'm not sure if what you're trying to do is standard in OpenMeetings, but in either case, editing the source the possibilities are endless, thanks to Sebastion and Maxim at the OpenMeetings/Apache group. ** ** ** ** -Jake -- *From:* Lee Saunders [mailto:leesenglishless...@gmail.com] *Sent:* Sunday, August 25, 2013 6:30 PM *To:* user@openmeetings.apache.org *Subject:* Re: Why don't calendar events expire? ** ** Hello Jake, ** ** Thank you for your help. I think everyone knows more about that than I do. I don't know about programming applications. I learnt some PHP and MySql from books to build an order tracking/customer info database system, and that was it. ** ** I did experience a recording issue today. A student left the room and returned, but the recorder didn't record any of their voice after they returned to the room, so only my half was recorded. I'll put that down to experience. ** ** I could perhaps learn from the source, thanks. ** ** All the best, ** ** Lee. ** ** ** ** On Sun, Aug 25, 2013 at 10:30 PM, Jacob C. Gaiski jgai...@emich.edu wrote: Write a console app that scans the database and removes files after encoding. ** ** ** ** Though, if there's a corrupt video and the encoded video becomes corrupted, you'll have no fall back if say, a multithreaded random bug happens that causes your ffmpeg to run before the stream had closed. ** ** ** ** I did all of my conversions with a console application that runs FFMPEG and updates a table every 20s. ** ** ** ** If you'd like the source that makes it happen I can send it to you. ** ** ** ** But all in all I'd recommend that you build a console app that reads from a database and changes it accordingly. ** ** -Jake On Aug 25, 2013, at 5:03 PM, Lee Saunders leesenglishless...@gmail.com wrote: Maxim, I ran -f, --file, and --cleanup, but that doesn't touch the streams. ** ** Those recordings really need to be removed after rendering to AVI. They will simply fill my disc if nothing can be deleted. Every meeting is 1 hour long and recorded, and there is already 6Gb of data in those streams after one day. ** ** Please don't think of me as moaning. Open Meetings is a great platform. I am just concerned about filling my disc with redundant data. ** ** Is it not possible to GET the user IDs for a roomID and delete the relations to the files so they can be deleted? I think not being able to delete anything, even under a warning, is somewhat restrictive and disc hogging. I understand the concerns about complaints about something later down the line and the need to retrieve data, but that would be the decision of the admin/IT team and management. Besides, there should be a backup of all that data anyway. ** ** I guess the only other way around it is to record a 1-second video and audio clip and replace all the files with them. That way the file names will remain intact. It will be time consuming, but better than rendering my disc full and unusable after about 3 months. What does Open Meetings do when a disc is full? ** ** All the best, ** ** Lee. ** ** ** ** On Sun, Aug 25, 2013 at 4:43 PM, Maxim Solodovnik solomax...@gmail.com wrote: you can use command line admin for this: ** ** -f,--files File operations - statictics/cleanup* *** --cleanup (optional) Should intermediate files be clean up ** ** ** ** On Sun, Aug 25, 2013 at 2:53 PM, Lee Saunders leesenglishless...@gmail.com wrote: I would like to delete recordings after downloading them to clear disc space. I'm not sure why
Re: Why don't calendar events expire?
Thanks, Maxim. Maybe there is a file path or something I need to add. On Mon, Aug 26, 2013 at 2:17 AM, Maxim Solodovnik solomax...@gmail.comwrote: I'll try to double check the tool. I was sure it performs the full clean up On Aug 26, 2013 5:50 AM, Lee Saunders leesenglishless...@gmail.com wrote: Indeed, Sebastian and Maxim have done a great job, and very generous to keep it Open Source. It was just frustrating to realise I'll have no hard disc left very quickly. On Sun, Aug 25, 2013 at 11:38 PM, Jacob Gaiski jgai...@emich.edu wrote: I think OpenMeetings require a somewhat knowledgable background with Java and running servers on Tomcat/Red5. ** ** ** ** I would recommend that you become familiar with Java the programming language and yes, take a look at the source. If you can get it to compile, publish your version and put in logging functions so that you can better see what it's doing. ** ** ** ** You should also be able to localize it onto a machine and debug it from Eclipse, given you have the right enviroment. I think the one you need is Eclipse Juno. ** ** ** ** Once you have the entire system localized onto your machine, you can attach and remove debug points from anywhere within the source and see exactly what's happening from a server perspective as you execute client code, and also be able to enter your changes accordingly as you need in the code as well. ** ** I'm not sure if what you're trying to do is standard in OpenMeetings, but in either case, editing the source the possibilities are endless, thanks to Sebastion and Maxim at the OpenMeetings/Apache group. ** ** ** ** -Jake -- *From:* Lee Saunders [mailto:leesenglishless...@gmail.com] *Sent:* Sunday, August 25, 2013 6:30 PM *To:* user@openmeetings.apache.org *Subject:* Re: Why don't calendar events expire? ** ** Hello Jake, ** ** Thank you for your help. I think everyone knows more about that than I do. I don't know about programming applications. I learnt some PHP and MySql from books to build an order tracking/customer info database system, and that was it. ** ** I did experience a recording issue today. A student left the room and returned, but the recorder didn't record any of their voice after they returned to the room, so only my half was recorded. I'll put that down to experience. ** ** I could perhaps learn from the source, thanks. ** ** All the best, ** ** Lee. ** ** ** ** On Sun, Aug 25, 2013 at 10:30 PM, Jacob C. Gaiski jgai...@emich.edu wrote: Write a console app that scans the database and removes files after encoding. ** ** ** ** Though, if there's a corrupt video and the encoded video becomes corrupted, you'll have no fall back if say, a multithreaded random bug happens that causes your ffmpeg to run before the stream had closed. ** ** ** ** I did all of my conversions with a console application that runs FFMPEG and updates a table every 20s. ** ** ** ** If you'd like the source that makes it happen I can send it to you. ** ** ** ** But all in all I'd recommend that you build a console app that reads from a database and changes it accordingly. ** ** -Jake On Aug 25, 2013, at 5:03 PM, Lee Saunders leesenglishless...@gmail.com wrote: Maxim, I ran -f, --file, and --cleanup, but that doesn't touch the streams. ** ** Those recordings really need to be removed after rendering to AVI. They will simply fill my disc if nothing can be deleted. Every meeting is 1 hour long and recorded, and there is already 6Gb of data in those streams after one day. ** ** Please don't think of me as moaning. Open Meetings is a great platform. I am just concerned about filling my disc with redundant data. ** ** Is it not possible to GET the user IDs for a roomID and delete the relations to the files so they can be deleted? I think not being able to delete anything, even under a warning, is somewhat restrictive and disc hogging. I understand the concerns about complaints about something later down the line and the need to retrieve data, but that would be the decision of the admin/IT team and management. Besides, there should be a backup of all that data anyway. ** ** I guess the only other way around it is to record a 1-second video and audio clip and replace all the files with them. That way the file names will remain intact. It will be time consuming, but better than rendering my disc full and unusable after about 3 months. What does Open Meetings do when a disc is full? ** ** All the best, ** ** Lee. ** ** ** ** On Sun, Aug 25, 2013 at 4:43 PM, Maxim Solodovnik solomax...@gmail.com wrote: you can use command line admin for this: ** ** -f,--files File operations - statictics
Re: All whiteboad contents missing after re-entering
Restarted the server. Still no contents. Am I supposed to save something before exiting a room? On Mon, Aug 26, 2013 at 2:43 AM, Maxim Solodovnik solomax...@gmail.comwrote: I'm afraid the only reason to it is server restart :(. The files should be there in this case. Are you sure you have entered the same room? On Aug 26, 2013 5:56 AM, Lee Saunders leesenglishless...@gmail.com wrote: Hello, I revisited a room I exited about 7 hours ago. All of the files that were loaded onto the whiteboard and text are not there. How do I get them back? Thanks, Lee.
Re: How do remote users connect to localhost?
That's good to see. Thanks Maxim. On Mon, Aug 26, 2013 at 2:45 AM, Maxim Solodovnik solomax...@gmail.comwrote: I never heard about such cases. On Aug 25, 2013 4:23 AM, Lee Saunders leesenglishless...@gmail.com wrote: I forwarded 1935, and now I can log in. As people can access ports, can they explore/damage my computer? On Sat, Aug 24, 2013 at 4:20 PM, Maxim Solodovnik solomax...@gmail.comwrote: try 1, 2, 3 means you have ports 1935 and 8088 closed On Sat, Aug 24, 2013 at 4:44 PM, Lee Saunders leesenglishless...@gmail.com wrote: I used NETSTAT to figure out what was opening what ports. Uninstalling ASUS Remote Go! service opened 5080 on TCP. PFPortchecker was able to send the packet. I can access Open Meetings from another machine within the same network using 192.168.0.8:5080, which automatically redirects to the openminutes folder and loads. When I try the same thing from the Internet, the page attempts to load (I see Try 1, Try 2...), but ends with missing components on the screen where the log in box is. It seems I have the connection to open minutes, but some parts are not being served. I feel as if it is almost there, just one or two things to adjust. Thanks again, Lee. On Sat, Aug 24, 2013 at 8:36 AM, Maxim Solodovnik solomax...@gmail.com wrote: This is network configuration issue. since you behind router and firewall I belive you should set up traffic forwarding on router and disable firewall. of check the configuration without router first. like connect the OM server from another machine in the same network. On Fri, Aug 23, 2013 at 5:48 PM, Lee Saunders leesenglishless...@gmail.com wrote: With firewall disabled, still no remote access. I am trying to connect with http://myip:5080/openmeetings On Fri, Aug 23, 2013 at 10:37 AM, Lee Saunders leesenglishless...@gmail.com wrote: Thank you for helping. It's confusing me, though. There is the IP address that is visible to the Internet, then my computer has an IP address to the router. When I use the Internet visible IP address:5080, nothing happens. So, I guess I need to get access to the local IP address as well from the Internet. On Fri, Aug 23, 2013 at 4:36 AM, Maxim Solodovnik solomax...@gmail.com wrote: This seems to be firewall issue. please access OM running and use you _external_ IP/hostname instead of localhost. Everything should work as expected On Thu, Aug 22, 2013 at 10:33 PM, Lee Saunders leesenglishless...@gmail.com wrote: Hello, I think it's working on localhost (installed okay), but how do remote users logo on to my room? The generated URL is for localhost:5080, but when I replace localhost with my IP address, there is no connection. Thanks, Lee. -- WBR Maxim aka solomax -- WBR Maxim aka solomax -- WBR Maxim aka solomax
Re: All whiteboad contents missing after re-entering
I've just found the button. Thanks. Maybe a save to PDF feature would be useful to make it downloadable. On Mon, Aug 26, 2013 at 5:02 PM, Maxim Solodovnik solomax...@gmail.comwrote: WB is stored in the memory until server is restarted. you need to use save WB feature to save it in the file, then to restore it :) On Mon, Aug 26, 2013 at 10:54 PM, Lee Saunders leesenglishless...@gmail.com wrote: Restarted the server. Still no contents. Am I supposed to save something before exiting a room? On Mon, Aug 26, 2013 at 2:43 AM, Maxim Solodovnik solomax...@gmail.comwrote: I'm afraid the only reason to it is server restart :(. The files should be there in this case. Are you sure you have entered the same room? On Aug 26, 2013 5:56 AM, Lee Saunders leesenglishless...@gmail.com wrote: Hello, I revisited a room I exited about 7 hours ago. All of the files that were loaded onto the whiteboard and text are not there. How do I get them back? Thanks, Lee. -- WBR Maxim aka solomax
Stop users creating their own rooms
Hello, I have noticed that users have options to start their own rooms. Is there a way to stop that? I tried to find options in users permissions, but there was nothing related to that. I would prefer users or other moderators not be allowed to open their own rooms. Thank you, Lee.
How can I save the chat session?
Hello, Well, I think Open Meetings is great now I've got used to how it works. I clicked the save button in the whiteboard tools, but when I reopen the room and load the room files, the chat text is not there. I had links and other things in the chat box, but it looks like they have been lost. Where does the chat text get saved? Thanks, Lee.
Unsigned Java application warning.
Hello, Open Meetings is really good. I updated Java JRE a couple of days ago. Since then I've been getting a warning when I start the screen recording application, stating that unsigned applications will not run in future versions of Java. Is there a patch I can apply? Thanks, Lee.
Select audio device
Hello, Is there a way for users to select the audio device they use. I had a student yesterday who couldn't get my audio into his headset. It was only going through his PC speakers. I don't see any selection menus for playback devices, only webcam and mic. Thank you, Lee.
Is OM3 official or in testing?
Hello, Is OM3 an official release now, or is it still 2.2? Thanks, Lee.
Admin -f --files --cleanup error
Hello, I am receiving errors when I want to clean up files. It used to show me the size of data removed and other information. Here's the CMD output: I:\classesadmin -f --files --cleanup I:\classesREM # I:\classesREM Licensed under the Apache License, Version 2.0 (the License); I:\classesREM you may not use this file except in compliance with the License. I:\classesREM You may obtain a copy of the License at I:\classesREM I:\classesREM http://www.apache.org/licenses/LICENSE-2.0 I:\classesREM I:\classesREM Unless required by applicable law or agreed to in writing, softwa re I:\classesREM distributed under the License is distributed on an AS IS BASIS, I:\classesREM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or i mplied. I:\classesREM See the License for the specific language governing permissions a nd I:\classesREM limitations under the License. I:\classesREM # Setting default logging context: default WARNING: all intermadiate files will be clean up! Context init... Logger name for context: openmeetings Context logger config file: logback-config.xml Adding logger context: openmeetings to map for context: openmeetings DEBUG 02-28 14:09:20.500 ContextLoggingListener.java 75 72 ROOT [main] - Startin g up context openmeetings SLF4J: Class path contains multiple SLF4J bindings. SLF4J: Found binding in [jar:file:/I:/classes/red5.jar!/org/slf4j/impl/StaticLog gerBinder.class] SLF4J: Found binding in [jar:file:/I:/classes/lib/logback-classic-1.0.3.jar!/org /slf4j/impl/StaticLoggerBinder.class] SLF4J: See http://www.slf4j.org/codes.html#multiple_bindings for an explanation. [INFO] [main] org.springframework.context.support.ClassPathXmlApplicationContext - Refreshing org.springframework.context.support.ClassPathXmlApplicationContext @4c60db08: startup date [Fri Feb 28 14:09:20 GMT 2014]; root of context hierarch y [INFO] [main] org.springframework.beans.factory.xml.XmlBeanDefinitionReader - Lo ading XML bean definitions from class path resource [openmeetings-applicationCon text.xml] [INFO] [main] org.springframework.beans.factory.support.DefaultListableBeanFacto ry - Pre-instantiating singletons in org.springframework.beans.factory.support.D efaultListableBeanFactory@6b1ddb66: defining beans [entityManagerFactory,transac tionManager,org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostPro cessor#0,jpaTransactionManager,multipartResolver,org.springframework.web.servlet .mvc.method.annotation.RequestMappingHandlerMapping#0,org.springframework.format .support.FormattingConversionServiceFactoryBean#0,org.springframework.web.servle t.mvc.method.annotation.RequestMappingHandlerAdapter#0,org.springframework.web.s ervlet.handler.MappedInterceptor#0, org.springframework.web.servlet.mvc.method.an notation.ExceptionHandlerExceptionResolver#0,org.springframework.web.servlet.mvc .annotation.ResponseStatusExceptionResolver#0, org.springframework.web.servlet.mv c.support.DefaultHandlerExceptionResolver#0,org.springframework.web.servlet.hand ler.BeanNameUrlHandlerMapping,org.springframework.web.servlet.mvc.HttpRequestHan dlerAdapter,org.springframework.web.servlet.mvc.SimpleControllerHandlerAdapter,o rg.springframework.aop.config.internalAutoProxyCreator,org.springframework.trans action.annotation.AnnotationTransactionAttributeSource#0,org.springframework.tra nsaction.interceptor.TransactionInterceptor#0, org.springframework.transaction.co nfig.internalTransactionAdvisor,org.springframework.context.annotation.internalC onfigurationAnnotationProcessor,org.springframework.context.annotation.internalA utowiredAnnotationProcessor,org.springframework.context.annotation.internalRequi redAnnotationProcessor,org.springframework.context.annotation.internalCommonAnno tationProcessor,org.springframework.context.annotation.internalPersistenceAnnota tionProcessor,backupImportController,importController,networkTestingController,s creenController,uploadController,web.handler,openmeetings.SessionManager,openmee tings.EmoticonsManager,openmeetings.HashMapStore,whiteBoardObjectListManagerById ,whiteBoardObjectSyncManager,openmeetings.DatabaseStore,openmeetings.ServerUtil, xmlcrm.service,printservice.service,pollservice.service,organisationservice.serv ice,meetingmemberservice.service,languageservice.service,invitationservice.servi ce,ldapconfigservice.service,whiteboardservice.service,userservice.service,files ervice.service,openmeetings.FileProcessor,openmeetings.FlvExplorerConverter,erro rservice.service,conferenceservice.service,configservice.service,chatservice.ser vice,calendarservice.service,flvrecorderservice.service,openmeetings.FlvRecorder ConverterTask,openmeetings.FlvInterviewConverterTask,openmeetings.FlvInterviewRe ConverterTask,openmeetings.FlvInterviewConverter,openmeetings.FlvRecorderConvert er,openmeetings.SlaveHTTPConnectionManager,openmeetings.SessionClearJob,sessionC
Re: Admin -f --files --cleanup error
Hello Maxim. I've always called the operation the same way. Only recently has it started failing. That option -d didn't work. it was unrecognised. All the above suggestions failed. On Sat, Mar 1, 2014 at 11:08 AM, Maxim Solodovnik solomax...@gmail.comwrote: The problem is in how you are calling this commend :( According to the ./admin.sh output: -- -f,--files File operations - statictics/cleanup --cleanup (optional) Should intermediate files be clean up -- so you need to use -f OR --files please try ./admin.sh -d -f --cleanup or ./admin.sh -d --files --cleanup PS on windows please use admin.bat instead of ./admin.sh On Fri, Feb 28, 2014 at 9:13 PM, Lee Saunders leesenglishless...@gmail.com wrote: Hello, I am receiving errors when I want to clean up files. It used to show me the size of data removed and other information. Here's the CMD output: I:\classesadmin -f --files --cleanup I:\classesREM # I:\classesREM Licensed under the Apache License, Version 2.0 (the License); I:\classesREM you may not use this file except in compliance with the License. I:\classesREM You may obtain a copy of the License at I:\classesREM I:\classesREM http://www.apache.org/licenses/LICENSE-2.0 I:\classesREM I:\classesREM Unless required by applicable law or agreed to in writing, softwa re I:\classesREM distributed under the License is distributed on an AS IS BASIS, I:\classesREM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or i mplied. I:\classesREM See the License for the specific language governing permissions a nd I:\classesREM limitations under the License. I:\classesREM # Setting default logging context: default WARNING: all intermadiate files will be clean up! Context init... Logger name for context: openmeetings Context logger config file: logback-config.xml Adding logger context: openmeetings to map for context: openmeetings DEBUG 02-28 14:09:20.500 ContextLoggingListener.java 75 72 ROOT [main] - Startin g up context openmeetings SLF4J: Class path contains multiple SLF4J bindings. SLF4J: Found binding in [jar:file:/I:/classes/red5.jar!/org/slf4j/impl/StaticLog gerBinder.class] SLF4J: Found binding in [jar:file:/I:/classes/lib/logback-classic-1.0.3.jar!/org /slf4j/impl/StaticLoggerBinder.class] SLF4J: See http://www.slf4j.org/codes.html#multiple_bindings for an explanation. [INFO] [main] org.springframework.context.support.ClassPathXmlApplicationContext - Refreshing org.springframework.context.support.ClassPathXmlApplicationContext @4c60db08: startup date [Fri Feb 28 14:09:20 GMT 2014]; root of context hierarch y [INFO] [main] org.springframework.beans.factory.xml.XmlBeanDefinitionReader - Lo ading XML bean definitions from class path resource [openmeetings-applicationCon text.xml] [INFO] [main] org.springframework.beans.factory.support.DefaultListableBeanFacto ry - Pre-instantiating singletons in org.springframework.beans.factory.support.D efaultListableBeanFactory@6b1ddb66: defining beans [entityManagerFactory,transac tionManager,org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostPro cessor#0,jpaTransactionManager,multipartResolver,org.springframework.web.servlet .mvc.method.annotation.RequestMappingHandlerMapping#0,org.springframework.format .support.FormattingConversionServiceFactoryBean#0,org.springframework.web.servle t.mvc.method.annotation.RequestMappingHandlerAdapter#0,org.springframework.web.s ervlet.handler.MappedInterceptor#0, org.springframework.web.servlet.mvc.method.an notation.ExceptionHandlerExceptionResolver#0,org.springframework.web.servlet.mvc .annotation.ResponseStatusExceptionResolver#0, org.springframework.web.servlet.mv c.support.DefaultHandlerExceptionResolver#0,org.springframework.web.servlet.hand ler.BeanNameUrlHandlerMapping,org.springframework.web.servlet.mvc.HttpRequestHan dlerAdapter,org.springframework.web.servlet.mvc.SimpleControllerHandlerAdapter,o rg.springframework.aop.config.internalAutoProxyCreator,org.springframework.trans action.annotation.AnnotationTransactionAttributeSource#0,org.springframework.tra nsaction.interceptor.TransactionInterceptor#0, org.springframework.transaction.co nfig.internalTransactionAdvisor,org.springframework.context.annotation.internalC onfigurationAnnotationProcessor,org.springframework.context.annotation.internalA utowiredAnnotationProcessor,org.springframework.context.annotation.internalRequi redAnnotationProcessor,org.springframework.context.annotation.internalCommonAnno tationProcessor
Re: Manifest of the JAR-file for application sharring produce an error message
Thank you. On Sat, Mar 1, 2014 at 11:05 AM, Maxim Solodovnik solomax...@gmail.comwrote: Here is the list of all OM products: https://builds.apache.org/view/M-R/view/OpenMeetings And the 3.0.x builds are here: https://builds.apache.org/view/M-R/view/OpenMeetings/job/Openmeetings%203.0.x/ On Fri, Feb 28, 2014 at 9:07 PM, Lee Saunders leesenglishless...@gmail.com wrote: Hello Maxim, Where is the 3.0.0. build? I cannot see it on the downloads page. Thanks, Lee. On Tue, Feb 18, 2014 at 2:06 PM, Michael Wuttke michael.wut...@beuth-hochschule.de wrote: Ok, I did it! :-) Michael Am 18.02.2014 14:52, schrieb Maxim Solodovnik: we are currently working on providing Web application signed by valid key, you can vote here https://issues.apache.org/jira/browse/INFRA-3991 -- WBR Maxim aka solomax
Re: Admin -f --files --cleanup error
Hello Maxim. Unable to install version 3. I moved the file mysql-connector-java-gpl-5.1.29 to \webapps\openmeetings\WEB-INF\lib and exectued it, but the error persists. Any ideas? Thank you, Lee. Installation is failed org.springframework.transaction.CannotCreateTransactionException: Could not open JPA EntityManager for transaction; nested exception is openjpa-2.2.2-r422266:1468616 fatal general error org.apache.openjpa.persistence.PersistenceException: Cannot load JDBC driver class 'com.mysql.jdbc.Driver' at org.springframework.orm.jpa.JpaTransactionManager.doBegin(JpaTransactionManager.java:427) at org.springframework.transaction.support.AbstractPlatformTransactionManager.getTransaction(AbstractPlatformTransactionManager.java:371) at org.springframework.transaction.interceptor.TransactionAspectSupport.createTransactionIfNecessary(TransactionAspectSupport.java:335) at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:105) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172) at org.springframework.aop.framework.Cglib2AopProxy$DynamicAdvisedInterceptor.intercept(Cglib2AopProxy.java:622) at org.apache.openmeetings.db.dao.user.UserLevelDao$$EnhancerByCGLIB$$d391be88.addUserLevel(generated) at org.apache.openmeetings.installation.ImportInitvalues.loadUserLevels(ImportInitvalues.java:133) at org.apache.openmeetings.installation.ImportInitvalues.loadSystem(ImportInitvalues.java:960) at org.apache.openmeetings.installation.ImportInitvalues.loadAll(ImportInitvalues.java:998) at org.apache.openmeetings.web.pages.install.InstallWizard$InstallProcess.run(InstallWizard.java:389) at java.lang.Thread.run(Thread.java:722) Caused by: openjpa-2.2.2-r422266:1468616 fatal general error org.apache.openjpa.persistence.PersistenceException: Cannot load JDBC driver class 'com.mysql.jdbc.Driver' at org.apache.openjpa.jdbc.sql.DBDictionaryFactory.newDBDictionary(DBDictionaryFactory.java:102) at org.apache.openjpa.jdbc.conf.JDBCConfigurationImpl.getDBDictionaryInstance(JDBCConfigurationImpl.java:603) at org.apache.openjpa.jdbc.meta.MappingRepository.endConfiguration(MappingRepository.java:1518) at org.apache.openjpa.lib.conf.Configurations.configureInstance(Configurations.java:531) at org.apache.openjpa.lib.conf.Configurations.configureInstance(Configurations.java:456) at org.apache.openjpa.lib.conf.PluginValue.instantiate(PluginValue.java:120) at org.apache.openjpa.conf.MetaDataRepositoryValue.instantiate(MetaDataRepositoryValue.java:68) at org.apache.openjpa.lib.conf.ObjectValue.instantiate(ObjectValue.java:83) at org.apache.openjpa.conf.OpenJPAConfigurationImpl.newMetaDataRepositoryInstance(OpenJPAConfigurationImpl.java:967) at org.apache.openjpa.conf.OpenJPAConfigurationImpl.getMetaDataRepositoryInstance(OpenJPAConfigurationImpl.java:958) at org.apache.openjpa.kernel.BrokerImpl.initialize(BrokerImpl.java:338) at org.apache.openjpa.kernel.BrokerImpl.initialize(BrokerImpl.java:326) at org.apache.openjpa.kernel.AbstractBrokerFactory.initializeBroker(AbstractBrokerFactory.java:228) at org.apache.openjpa.kernel.AbstractBrokerFactory.newBroker(AbstractBrokerFactory.java:212) at org.apache.openjpa.kernel.DelegatingBrokerFactory.newBroker(DelegatingBrokerFactory.java:156) at org.apache.openjpa.persistence.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:227) at org.apache.openjpa.persistence.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:154) at org.apache.openjpa.persistence.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:60) at org.springframework.orm.jpa.JpaTransactionManager.createEntityManagerForTransaction(JpaTransactionManager.java:445) at org.springframework.orm.jpa.JpaTransactionManager.doBegin(JpaTransactionManager.java:366) ... 11 more Caused by: org.apache.commons.dbcp.SQLNestedException: Cannot load JDBC driver class 'com.mysql.jdbc.Driver' at org.apache.commons.dbcp.BasicDataSource.createConnectionFactory(BasicDataSource.java:1429) at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1371) at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:1044) at org.apache.openjpa.lib.jdbc.DelegatingDataSource.getConnection(DelegatingDataSource.java:110) at org.apache.openjpa.lib.jdbc.DecoratingDataSource.getConnection(DecoratingDataSource.java:87) at org.apache.openjpa.jdbc.sql.DBDictionaryFactory.newDBDictionary(DBDictionaryFactory.java:91) ... 30 more Caused by: java.lang.ClassNotFoundException: com.mysql.jdbc.Driver
Re: Admin -f --files --cleanup error
I could only find the MSI installer. I copied that into the lib folder. I even executed it in that folder, but it doesn't extract anything. When I open it in 7-ZIP three are hundreds of files. On Sun, Mar 2, 2014 at 12:44 PM, Maxim Solodovnik solomax...@gmail.comwrote: you need to go here: http://dev.mysql.com/downloads/connector/j/ download mysql-connector-java-5.1.29.zip extract it into temporary folder find *jar* file in the files extracted and copy it into \webapps\openmeetings\WEB-INF\lib then run command line installer or web installer On Sun, Mar 2, 2014 at 7:39 PM, Lee Saunders leesenglishless...@gmail.com wrote: Hello Maxim. Unable to install version 3. I moved the file mysql-connector-java-gpl-5.1.29 to \webapps\openmeetings\WEB-INF\lib and exectued it, but the error persists. Any ideas? Thank you, Lee. Installation is failed org.springframework.transaction.CannotCreateTransactionException: Could not open JPA EntityManager for transaction; nested exception is openjpa-2.2.2-r422266:1468616 fatal general error org.apache.openjpa.persistence.PersistenceException: Cannot load JDBC driver class 'com.mysql.jdbc.Driver' at org.springframework.orm.jpa.JpaTransactionManager.doBegin(JpaTransactionManager.java:427) at org.springframework.transaction.support.AbstractPlatformTransactionManager.getTransaction(AbstractPlatformTransactionManager.java:371) at org.springframework.transaction.interceptor.TransactionAspectSupport.createTransactionIfNecessary(TransactionAspectSupport.java:335) at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:105) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172) at org.springframework.aop.framework.Cglib2AopProxy$DynamicAdvisedInterceptor.intercept(Cglib2AopProxy.java:622) at org.apache.openmeetings.db.dao.user.UserLevelDao$$EnhancerByCGLIB$$d391be88.addUserLevel(generated) at org.apache.openmeetings.installation.ImportInitvalues.loadUserLevels(ImportInitvalues.java:133) at org.apache.openmeetings.installation.ImportInitvalues.loadSystem(ImportInitvalues.java:960) at org.apache.openmeetings.installation.ImportInitvalues.loadAll(ImportInitvalues.java:998) at org.apache.openmeetings.web.pages.install.InstallWizard$InstallProcess.run(InstallWizard.java:389) at java.lang.Thread.run(Thread.java:722) Caused by: openjpa-2.2.2-r422266:1468616 fatal general error org.apache.openjpa.persistence.PersistenceException: Cannot load JDBC driver class 'com.mysql.jdbc.Driver' at org.apache.openjpa.jdbc.sql.DBDictionaryFactory.newDBDictionary(DBDictionaryFactory.java:102) at org.apache.openjpa.jdbc.conf.JDBCConfigurationImpl.getDBDictionaryInstance(JDBCConfigurationImpl.java:603) at org.apache.openjpa.jdbc.meta.MappingRepository.endConfiguration(MappingRepository.java:1518) at org.apache.openjpa.lib.conf.Configurations.configureInstance(Configurations.java:531) at org.apache.openjpa.lib.conf.Configurations.configureInstance(Configurations.java:456) at org.apache.openjpa.lib.conf.PluginValue.instantiate(PluginValue.java:120) at org.apache.openjpa.conf.MetaDataRepositoryValue.instantiate(MetaDataRepositoryValue.java:68) at org.apache.openjpa.lib.conf.ObjectValue.instantiate(ObjectValue.java:83) at org.apache.openjpa.conf.OpenJPAConfigurationImpl.newMetaDataRepositoryInstance(OpenJPAConfigurationImpl.java:967) at org.apache.openjpa.conf.OpenJPAConfigurationImpl.getMetaDataRepositoryInstance(OpenJPAConfigurationImpl.java:958) at org.apache.openjpa.kernel.BrokerImpl.initialize(BrokerImpl.java:338) at org.apache.openjpa.kernel.BrokerImpl.initialize(BrokerImpl.java:326) at org.apache.openjpa.kernel.AbstractBrokerFactory.initializeBroker(AbstractBrokerFactory.java:228) at org.apache.openjpa.kernel.AbstractBrokerFactory.newBroker(AbstractBrokerFactory.java:212) at org.apache.openjpa.kernel.DelegatingBrokerFactory.newBroker(DelegatingBrokerFactory.java:156) at org.apache.openjpa.persistence.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:227) at org.apache.openjpa.persistence.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:154) at org.apache.openjpa.persistence.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:60) at org.springframework.orm.jpa.JpaTransactionManager.createEntityManagerForTransaction(JpaTransactionManager.java:445) at org.springframework.orm.jpa.JpaTransactionManager.doBegin(JpaTransactionManager.java:366) ... 11 more Caused by: org.apache.commons.dbcp.SQLNestedException: Cannot load JDBC driver class 'com.mysql.jdbc.Driver' at org.apache.commons.dbcp.BasicDataSource.createConnectionFactory
Re: Are side-by-side installations possible?
Hello George, I just saw your reply. I've been battling with this. Maxim has been trying to help with an OM3 installation. All I'm getting after changing the persistence file and adding a new DB is an internal error. On Mon, Feb 24, 2014 at 12:19 AM, George Kirkham gkirk...@co2crc.com.auwrote: Lee, Openmeetings will use the current database, which you need to DROP if you are going to keep the same database name. If you want to have two installations so you can compare between them, when you are installing the second instance you can easily change the name of the openmeetings database that you are creating and the name of the database in the persistence.xml file. Of course you would have to install openmeetings into folder by another name, this is not something that I have ever bothered to do, but I believe would work. *Step 4 - Install MySQL and configure OpenMeetings database* apt-get install mysql-server mysql -u root -p CREATE DATABASE openmeetings DEFAULT CHARACTER SET 'utf8'; GRANT ALL PRIVILEGES ON openmeetings. * TO 'openmeetings'@'localhost' IDENTIFIED BY 'yourpassword' WITH GRANT OPTION; vi /usr/lib/red5/webapps/openmeetings/WEB-INF/classes/META-INF/persistence.xml Change the Username and Password to those you created in MySQL. *Note*: if you want OpenMeetings to use an external database or your MySQL is listening to a network address and not 127.0.0.1, then you can replace localhost with your MySQL Server's IP address. , Url=jdbc:mysql://localhost:3306/openmeetings?... , Username=*openmeetings* , Password=*yourpassword*/ *Step 4 - Install MySQL and configure OpenMeetings database* apt-get install mysql-server mysql -u root -p CREATE DATABASE openmeetings2 DEFAULT CHARACTER SET 'utf8'; GRANT ALL PRIVILEGES ON openmeetings2. * TO 'openmeetings'@'localhost' IDENTIFIED BY 'yourpassword' WITH GRANT OPTION; vi /usr/lib/red5/webapps/openmeetings2 /WEB-INF/classes/META-INF/persistence.xml Change the Username and Password to those you created in MySQL. *Note*: if you want OpenMeetings to use an external database or your MySQL is listening to a network address and not 127.0.0.1, then you can replace localhost with your MySQL Server's IP address. , Url=jdbc:mysql://localhost:3306/openmeetings2?... , Username=*openmeetings* , Password=*yourpassword*/ Thanks, George Kirkham *From:* Lee Saunders [mailto:leesenglishless...@gmail.com] *Sent:* Sunday, 23 February 2014 12:13 AM *To:* user@openmeetings.apache.org *Subject:* Are side-by-side installations possible? Hello, I am running OM 2.1.1, but would like to see how 2.2 compares. If I unpack 2.2 into a new folder on my drive (windows desktop), will OM create a new MySQL database or overwrite the existing one? Thanks, Lee.
OM3.0.0 - Recording A/V not synced and other recordings issues.
Dear Forum, Tried my first live classes today with students. Classroom behaviour works as well as in 2.2. Nice! I have noticed some things with the recordings: 1) File size is double that of OM 2.2 (just over 2Gb for 1-hour recording with me and one student). 2) Audio and video of the downloaded AVI file is not in sync. 3) No playback available in the recordings area. 4) All recordings have warning icons (see attached image) [image: Inline image 1]. I like the new design to the admin and dashboard areas. Well done! All the best, Lee. inline: recordings.png
Re: OM3.0.0 - Recording A/V not synced and other recordings issues.
Thank you for your reply, Maxim. Which logs do you need? An hour's class used to create an AVI file of around 1GB in 2.2, now it's 2Gb in ver 3.0.0. Thanks, Lee. On Fri, Mar 14, 2014 at 5:24 PM, Maxim Solodovnik solomax...@gmail.comwrote: access logs are not useful According to your recording logs you have 1 hour recording with 300M audio, not sure about video (nothing in the log) conversion and file sizes are the same in 2.2 (this code was not changed) On Sat, Mar 15, 2014 at 12:03 AM, Lee Saunders leesenglishless...@gmail.com wrote: Here are two access logs, and an error file from a recording today. FPS was set to 10, but still came out at 2Gb, which is the same as a file at 20 FPS. I can download the AVI, but it is far too big. I'll go back to ver 2.2. On Fri, Mar 14, 2014 at 11:19 AM, Maxim Solodovnik solomax...@gmail.comwrote: ogg and mp4 are separate files. avi size might grow because of better FPS will wait for additional details On Fri, Mar 14, 2014 at 3:50 PM, Lee Saunders leesenglishless...@gmail.com wrote: Hello Maxim, 1) Does the AVI contain both MP3 and OGG? It is that what's twice as big 2) I'm sure it was RC2. 3) When I clicked the warning, I think there weren't any error boxes. I'll need to reproduce it. On Sat, Mar 8, 2014 at 6:33 AM, Maxim Solodovnik solomax...@gmail.comwrote: 1) This is because mp4 and ogg files are additionally created for HTML5 video 2) Which version were you tested? RC2/release have this issue fixed 3) 4) please click on warning icon and check the errors in the popup window (should be marked in red), This seems to be ffmpeg issue, logs should gave more detailed info. On Sat, Mar 8, 2014 at 2:01 AM, Lee Saunders leesenglishless...@gmail.com wrote: Dear Forum, Tried my first live classes today with students. Classroom behaviour works as well as in 2.2. Nice! I have noticed some things with the recordings: 1) File size is double that of OM 2.2 (just over 2Gb for 1-hour recording with me and one student). 2) Audio and video of the downloaded AVI file is not in sync. 3) No playback available in the recordings area. 4) All recordings have warning icons (see attached image) [image: Inline image 1]. I like the new design to the admin and dashboard areas. Well done! All the best, Lee. -- WBR Maxim aka solomax -- WBR Maxim aka solomax -- WBR Maxim aka solomax inline: recordings.png
Re: Screen sharing - download file .jnlp?
I don't have any Java certificates installed. Is that why I always get a security error? [image: Inline image 1] On Thu, Mar 13, 2014 at 10:33 AM, Maxim Solodovnik solomax...@gmail.comwrote: Screen sharing Web Start Application is signed by certificate This certificate is checked by java on application start On Thu, Mar 13, 2014 at 4:09 PM, he...@isn10.com wrote: Am I missing something here? There is certificate files somewhere? Thanks! Maxim Solodovnik kirjoitti 2014-03-12 17:27: We should release more often, hopefully we will :) On Wed, Mar 12, 2014 at 9:58 PM, Michael Wuttke michael.wut...@beuth-hochschule.de wrote: Hello Maxim, so I should update mor often, as well? No problem if the releases are stable and the upgrade path is clean. Because I don't want neither mess up my current installations. ;-) Thanks for the great job, Michael Am 12.03.2014 15:53, schrieb Maxim Solodovnik: This is historical :) We should release more often On Wed, Mar 12, 2014 at 9:43 PM, Michael Wuttke michael.wut...@beuth-hochschule.de wrote: Hello, I agree with Bogdan. It is hard to accept as a normal user. Never the less, thank you for creating a new certificate. But why you created a certificate only for tree month and not for a year f.e. (please see screenshotIII). Am 12.03.2014 10:06, schrieb he...@isn10.com mailto:he...@isn10.com: And this cant be right that users who are going to use Openmeetings and screen sharing should do this kind of stuff? Thanks Greetings, Michael -- WBR Maxim aka solomax -- WBR Maxim aka solomax -- WBR Maxim aka solomax inline: cert.png
Re: Libre Office files show as 'Deleted'
Okay. Thanks Maxim. I'll continue with converting to PDF. On Sun, Mar 16, 2014 at 10:42 AM, Maxim Solodovnik solomax...@gmail.comwrote: unfortunately jodconverter is not very stable on Windows The only thing I can propose is to use older revision of OO, this might work On Sun, Mar 16, 2014 at 2:12 AM, Lee Saunders leesenglishless...@gmail.com wrote: Hello, I've never been able to get the Libre Office function to work (OM 2.2 or 3.0.0). Files always show as 'DELETED'. The file path points to C:\Program Files (x86)\LibreOffice 4\program, which has the EXE files for each Libre Office program, including soffice.exe. Any ideas? Thanks all, Lee. -- WBR Maxim aka solomax
Re: OM3.0.0 - Recording A/V not synced and other recordings issues.
Here's the result of a 5-minute recording with only me in the room. The error icon is still there: process: stripAudioFromFLVs command: C:\ffmpeg\bin\ffmpeg -async 1 -i I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53.flv I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53_WAVE.wav exception: null error: ffmpeg version N-61481-g4d17179 Copyright (c) 2000-2014 the FFmpeg developers built on Mar 16 2014 02:48:16 with gcc 4.8.2 (GCC) configuration: --disable-static --enable-shared --enable-gpl --enable-version3 --disable-w32threads --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetype --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-zlib libavutil 52. 66.101 / 52. 66.101 libavcodec 55. 52.102 / 55. 52.102 libavformat 55. 34.101 / 55. 34.101 libavdevice 55. 11.100 / 55. 11.100 libavfilter 4. 3.100 / 4. 3.100 libswscale 2. 5.101 / 2. 5.101 libswresample 0. 18.100 / 0. 18.100 libpostproc 52. 3.100 / 52. 3.100 [h264 @ 004b7980] AVC: nal size 21102643 [h264 @ 004b7980] missing picture in access unit with size 41 [h264 @ 004b7980] AVC: nal size 21102643 [h264 @ 004b7980] missing picture in access unit with size 41 Input #0, flv, from 'I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53.flv': Metadata: server : Red5 Server 1.0.0 RC3 Rev: 4393 creationdate : Sun Mar 16 14:00:06 GMT 2014 canSeekToEnd : true Duration: 00:05:12.71, start: 0.001000, bitrate: 186 kb/s Stream #0:0: Video: h264 (Baseline), yuv420p(tv), 240x180 [SAR 1:1 DAR 4:3], 136 kb/s, 30.33 fps, 30 tbr, 1k tbn, 60 tbc Stream #0:1: Audio: nellymoser, 22050 Hz, mono, flt, 44 kb/s -async is forwarded to lavfi similarly to -af aresample=async=1:min_hard_comp=0.10:first_pts=0. Output #0, wav, to 'I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53_WAVE.wav': Metadata: server : Red5 Server 1.0.0 RC3 Rev: 4393 creationdate : Sun Mar 16 14:00:06 GMT 2014 canSeekToEnd : true ISFT : Lavf55.34.101 Stream #0:0: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 22050 Hz, mono, s16, 352 kb/s Stream mapping: Stream #0:1 - #0:0 (nellymoser - pcm_s16le) Press [q] to stop, [?] for help size= 6741kB time=00:02:36.51 bitrate= 352.8kbits/s size= 13469kB time=00:05:12.74 bitrate= 352.8kbits/s video:0kB audio:13469kB subtitle:0 data:0 global headers:0kB muxing overhead 0.000580% exitValue: null out: process: addStartEndToAudio command: C:\Program Files (x86)\sox-14-4-1\sox I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53_WAVE.wav I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53_FULL_WAVE.wav pad 0.191 0.006 exception: null error: exitValue: null out: On Sun, Mar 16, 2014 at 1:35 PM, Maxim Solodovnik solomax...@gmail.comwrote: the file created by screen sharing application is 2GB your ffmpeg has no h264 support lots of [flashsv @ 0034bc60] Frame width or height differs from first frame! [flashsv @ 0034bc60] fh = 561, fv 1200 vs ch = 749, cv = 1600 errors while converting :( It should be fixed in latest 3.0.1 build available here: https://builds.apache.org/view/M-R/view/OpenMeetings/job/Openmeetings%203.0.x/ Another weird thing is: video:16573kB audio:164kB subtitle:0 global headers:0kB muxing overhead 5.218149% The file should be no so big I would recommend to update ffmpeg mp4/ogg files are significantly less, and it will be accessible om mobile devices (tested using iPhon/iPad?Samsung GS2+Chrome) Maybe you can create test 5 minutes recording using FPS == 2-5? In case it will be ~150-200Mb the problem is reproducible on your machine On Sun, Mar 16, 2014 at 8:03 PM, Lee Saunders leesenglishless...@gmail.com wrote: Thanks, Maxim. Here's the files. I'm wondering if I've accidentally changed a setting for recording quality somewhere. Thanks again, Lee. On Sun, Mar 16, 2014 at 10:49 AM, Maxim Solodovnik solomax...@gmail.comwrote: I need openmeetings.log Additionally it would be nice if you can perform select from flvrecordings_log table And maybe check the sizes of raw flv files at webapps/openmeetings/streams/ROOM_ID will try to check file sizes on my servers On Sun, Mar 16, 2014 at 1:32 AM, Lee Saunders leesenglishless...@gmail.com wrote: Thank you for your reply, Maxim. Which logs do you need? An hour's class used to create an AVI file
Re: OM3.0.0 - Recording A/V not synced and other recordings issues.
FPS = 5 Problem now is I can't enter rooms from the calendar. On Sun, Mar 16, 2014 at 2:22 PM, Maxim Solodovnik solomax...@gmail.comwrote: Error icon is there because of your ffmpeg is unable to create mp4/ogg files As I can see the file size is 43M so 1 hour recording will be ~500M (it is better than 2G) What was the FPS setting? On Sun, Mar 16, 2014 at 9:09 PM, Lee Saunders leesenglishless...@gmail.com wrote: Here's the result of a 5-minute recording with only me in the room. The error icon is still there: process: stripAudioFromFLVs command: C:\ffmpeg\bin\ffmpeg -async 1 -i I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53.flv I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53_WAVE.wav exception: null error: ffmpeg version N-61481-g4d17179 Copyright (c) 2000-2014 the FFmpeg developers built on Mar 16 2014 02:48:16 with gcc 4.8.2 (GCC) configuration: --disable-static --enable-shared --enable-gpl --enable-version3 --disable-w32threads --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetype --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-zlib libavutil 52. 66.101 / 52. 66.101 libavcodec 55. 52.102 / 55. 52.102 libavformat 55. 34.101 / 55. 34.101 libavdevice 55. 11.100 / 55. 11.100 libavfilter 4. 3.100 / 4. 3.100 libswscale 2. 5.101 / 2. 5.101 libswresample 0. 18.100 / 0. 18.100 libpostproc 52. 3.100 / 52. 3.100 [h264 @ 004b7980] AVC: nal size 21102643 [h264 @ 004b7980] missing picture in access unit with size 41 [h264 @ 004b7980] AVC: nal size 21102643 [h264 @ 004b7980] missing picture in access unit with size 41 Input #0, flv, from 'I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53.flv': Metadata: server : Red5 Server 1.0.0 RC3 Rev: 4393 creationdate : Sun Mar 16 14:00:06 GMT 2014 canSeekToEnd : true Duration: 00:05:12.71, start: 0.001000, bitrate: 186 kb/s Stream #0:0: Video: h264 (Baseline), yuv420p(tv), 240x180 [SAR 1:1 DAR 4:3], 136 kb/s, 30.33 fps, 30 tbr, 1k tbn, 60 tbc Stream #0:1: Audio: nellymoser, 22050 Hz, mono, flt, 44 kb/s -async is forwarded to lavfi similarly to -af aresample=async=1:min_hard_comp=0.10:first_pts=0. Output #0, wav, to 'I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53_WAVE.wav': Metadata: server : Red5 Server 1.0.0 RC3 Rev: 4393 creationdate : Sun Mar 16 14:00:06 GMT 2014 canSeekToEnd : true ISFT : Lavf55.34.101 Stream #0:0: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 22050 Hz, mono, s16, 352 kb/s Stream mapping: Stream #0:1 - #0:0 (nellymoser - pcm_s16le) Press [q] to stop, [?] for help size= 6741kB time=00:02:36.51 bitrate= 352.8kbits/s size= 13469kB time=00:05:12.74 bitrate= 352.8kbits/s video:0kB audio:13469kB subtitle:0 data:0 global headers:0kB muxing overhead 0.000580% exitValue: null out: process: addStartEndToAudio command: C:\Program Files (x86)\sox-14-4-1\sox I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53_WAVE.wav I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53_FULL_WAVE.wav pad 0.191 0.006 exception: null error: exitValue: null out: On Sun, Mar 16, 2014 at 1:35 PM, Maxim Solodovnik solomax...@gmail.comwrote: the file created by screen sharing application is 2GB your ffmpeg has no h264 support lots of [flashsv @ 0034bc60] Frame width or height differs from first frame! [flashsv @ 0034bc60] fh = 561, fv 1200 vs ch = 749, cv = 1600 errors while converting :( It should be fixed in latest 3.0.1 build available here: https://builds.apache.org/view/M-R/view/OpenMeetings/job/Openmeetings%203.0.x/ Another weird thing is: video:16573kB audio:164kB subtitle:0 global headers:0kB muxing overhead 5.218149% The file should be no so big I would recommend to update ffmpeg mp4/ogg files are significantly less, and it will be accessible om mobile devices (tested using iPhon/iPad?Samsung GS2+Chrome) Maybe you can create test 5 minutes recording using FPS == 2-5? In case it will be ~150-200Mb the problem is reproducible on your machine On Sun, Mar 16, 2014 at 8:03 PM, Lee Saunders leesenglishless...@gmail.com wrote: Thanks, Maxim. Here's the files. I'm wondering if I've accidentally changed a setting for recording quality somewhere. Thanks again, Lee. On Sun, Mar 16, 2014 at 10:49
Re: OM3.0.0 - Recording A/V not synced and other recordings issues.
I'm not sure how to make FFMPEG create MP3 and OGG files. According to its readme file the lame and H264 DLLs are enabled. Changing the LibreOffice directory did not work Next question is, can I unzip OM 3.0.1 over Om 3.0.0 to upgrade it? Thanks, Lee. On Sun, Mar 16, 2014 at 2:38 PM, Maxim Solodovnik solomax...@gmail.comwrote: can you please try to logout/login? Somehow it helps from time to time Should file an issue and fix it in 3.0.1 On Sun, Mar 16, 2014 at 9:36 PM, Lee Saunders leesenglishless...@gmail.com wrote: FPS = 5 Problem now is I can't enter rooms from the calendar. On Sun, Mar 16, 2014 at 2:22 PM, Maxim Solodovnik solomax...@gmail.comwrote: Error icon is there because of your ffmpeg is unable to create mp4/ogg files As I can see the file size is 43M so 1 hour recording will be ~500M (it is better than 2G) What was the FPS setting? On Sun, Mar 16, 2014 at 9:09 PM, Lee Saunders leesenglishless...@gmail.com wrote: Here's the result of a 5-minute recording with only me in the room. The error icon is still there: process: stripAudioFromFLVs command: C:\ffmpeg\bin\ffmpeg -async 1 -i I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53.flv I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53_WAVE.wav exception: null error: ffmpeg version N-61481-g4d17179 Copyright (c) 2000-2014 the FFmpeg developers built on Mar 16 2014 02:48:16 with gcc 4.8.2 (GCC) configuration: --disable-static --enable-shared --enable-gpl --enable-version3 --disable-w32threads --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetype --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-zlib libavutil 52. 66.101 / 52. 66.101 libavcodec 55. 52.102 / 55. 52.102 libavformat 55. 34.101 / 55. 34.101 libavdevice 55. 11.100 / 55. 11.100 libavfilter 4. 3.100 / 4. 3.100 libswscale 2. 5.101 / 2. 5.101 libswresample 0. 18.100 / 0. 18.100 libpostproc 52. 3.100 / 52. 3.100 [h264 @ 004b7980] AVC: nal size 21102643 [h264 @ 004b7980] missing picture in access unit with size 41 [h264 @ 004b7980] AVC: nal size 21102643 [h264 @ 004b7980] missing picture in access unit with size 41 Input #0, flv, from 'I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53.flv': Metadata: server : Red5 Server 1.0.0 RC3 Rev: 4393 creationdate : Sun Mar 16 14:00:06 GMT 2014 canSeekToEnd : true Duration: 00:05:12.71, start: 0.001000, bitrate: 186 kb/s Stream #0:0: Video: h264 (Baseline), yuv420p(tv), 240x180 [SAR 1:1 DAR 4:3], 136 kb/s, 30.33 fps, 30 tbr, 1k tbn, 60 tbc Stream #0:1: Audio: nellymoser, 22050 Hz, mono, flt, 44 kb/s -async is forwarded to lavfi similarly to -af aresample=async=1:min_hard_comp=0.10:first_pts=0. Output #0, wav, to 'I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53_WAVE.wav': Metadata: server : Red5 Server 1.0.0 RC3 Rev: 4393 creationdate : Sun Mar 16 14:00:06 GMT 2014 canSeekToEnd : true ISFT : Lavf55.34.101 Stream #0:0: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 22050 Hz, mono, s16, 352 kb/s Stream mapping: Stream #0:1 - #0:0 (nellymoser - pcm_s16le) Press [q] to stop, [?] for help size= 6741kB time=00:02:36.51 bitrate= 352.8kbits/s size= 13469kB time=00:05:12.74 bitrate= 352.8kbits/s video:0kB audio:13469kB subtitle:0 data:0 global headers:0kB muxing overhead 0.000580% exitValue: null out: process: addStartEndToAudio command: C:\Program Files (x86)\sox-14-4-1\sox I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53_WAVE.wav I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53_FULL_WAVE.wav pad 0.191 0.006 exception: null error: exitValue: null out: On Sun, Mar 16, 2014 at 1:35 PM, Maxim Solodovnik solomax...@gmail.com wrote: the file created by screen sharing application is 2GB your ffmpeg has no h264 support lots of [flashsv @ 0034bc60] Frame width or height differs from first frame! [flashsv @ 0034bc60] fh = 561, fv 1200 vs ch = 749, cv = 1600 errors while converting :( It should be fixed in latest 3.0.1 build available here: https://builds.apache.org/view/M-R/view/OpenMeetings/job/Openmeetings%203.0.x/ Another weird thing is: video:16573kB audio:164kB subtitle:0 global headers:0kB muxing overhead 5.218149% The file should be no so big I would recommend to update
Re: Libre Office files show as 'Deleted'
Hello Maxim, I changed the directory, but it still didn't work. Must be JOD, as you suggested. On Sun, Mar 16, 2014 at 1:58 PM, Maxim Solodovnik solomax...@gmail.comwrote: I more thing: If I'm not mistaken you should set C:\Program Files (x86)\LibreOffice 4 as office.home instead of C:\Program Files (x86)\LibreOffice 4\program at least on the Linux system this is the rule On Sun, Mar 16, 2014 at 8:56 PM, Lee Saunders leesenglishless...@gmail.com wrote: Okay. Thanks Maxim. I'll continue with converting to PDF. On Sun, Mar 16, 2014 at 10:42 AM, Maxim Solodovnik solomax...@gmail.comwrote: unfortunately jodconverter is not very stable on Windows The only thing I can propose is to use older revision of OO, this might work On Sun, Mar 16, 2014 at 2:12 AM, Lee Saunders leesenglishless...@gmail.com wrote: Hello, I've never been able to get the Libre Office function to work (OM 2.2 or 3.0.0). Files always show as 'DELETED'. The file path points to C:\Program Files (x86)\LibreOffice 4\program, which has the EXE files for each Libre Office program, including soffice.exe. Any ideas? Thanks all, Lee. -- WBR Maxim aka solomax -- WBR Maxim aka solomax
Re: OM3.0.0 - Recording A/V not synced and other recordings issues.
Further information: I download the AVI files from, and them upload to a cloud server, then delete the files in OM streams via Admin. I do not allow students to link to the recordings in OM as I want to keep my disk clear of the recordings. On Wed, Mar 19, 2014 at 4:11 PM, Lee Saunders leesenglishless...@gmail.comwrote: Thanks, Maxin. I downloaded the latest FFMPEG, and I'm not sure how to add libfdk_aac file to FFMPEG. I wrongly assumed that OM 3 would work out of the box, and by following the tutorial link to the site where FFMPEG is downloaded from.. On Mon, Mar 17, 2014 at 1:49 AM, Maxim Solodovnik solomax...@gmail.comwrote: To produce HTML5 compatible video ffmpeg should support both x264 and libfdk_aac libfdk_aac is currently missing in your ffmpeg :( you can extract it in separate place copy webapps/openmeetings/WEB-INF/classes/META-INF/* from the old installation to the new place and run On Mon, Mar 17, 2014 at 5:32 AM, Lee Saunders leesenglishless...@gmail.com wrote: I'm not sure how to make FFMPEG create MP3 and OGG files. According to its readme file the lame and H264 DLLs are enabled. Changing the LibreOffice directory did not work Next question is, can I unzip OM 3.0.1 over Om 3.0.0 to upgrade it? Thanks, Lee. On Sun, Mar 16, 2014 at 2:38 PM, Maxim Solodovnik solomax...@gmail.comwrote: can you please try to logout/login? Somehow it helps from time to time Should file an issue and fix it in 3.0.1 On Sun, Mar 16, 2014 at 9:36 PM, Lee Saunders leesenglishless...@gmail.com wrote: FPS = 5 Problem now is I can't enter rooms from the calendar. On Sun, Mar 16, 2014 at 2:22 PM, Maxim Solodovnik solomax...@gmail.com wrote: Error icon is there because of your ffmpeg is unable to create mp4/ogg files As I can see the file size is 43M so 1 hour recording will be ~500M (it is better than 2G) What was the FPS setting? On Sun, Mar 16, 2014 at 9:09 PM, Lee Saunders leesenglishless...@gmail.com wrote: Here's the result of a 5-minute recording with only me in the room. The error icon is still there: process: stripAudioFromFLVs command: C:\ffmpeg\bin\ffmpeg -async 1 -i I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53.flv I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53_WAVE.wav exception: null error: ffmpeg version N-61481-g4d17179 Copyright (c) 2000-2014 the FFmpeg developers built on Mar 16 2014 02:48:16 with gcc 4.8.2 (GCC) configuration: --disable-static --enable-shared --enable-gpl --enable-version3 --disable-w32threads --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetype --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-zlib libavutil 52. 66.101 / 52. 66.101 libavcodec 55. 52.102 / 55. 52.102 libavformat 55. 34.101 / 55. 34.101 libavdevice 55. 11.100 / 55. 11.100 libavfilter 4. 3.100 / 4. 3.100 libswscale 2. 5.101 / 2. 5.101 libswresample 0. 18.100 / 0. 18.100 libpostproc 52. 3.100 / 52. 3.100 [h264 @ 004b7980] AVC: nal size 21102643 [h264 @ 004b7980] missing picture in access unit with size 41 [h264 @ 004b7980] AVC: nal size 21102643 [h264 @ 004b7980] missing picture in access unit with size 41 Input #0, flv, from 'I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53.flv': Metadata: server : Red5 Server 1.0.0 RC3 Rev: 4393 creationdate : Sun Mar 16 14:00:06 GMT 2014 canSeekToEnd : true Duration: 00:05:12.71, start: 0.001000, bitrate: 186 kb/s Stream #0:0: Video: h264 (Baseline), yuv420p(tv), 240x180 [SAR 1:1 DAR 4:3], 136 kb/s, 30.33 fps, 30 tbr, 1k tbn, 60 tbc Stream #0:1: Audio: nellymoser, 22050 Hz, mono, flt, 44 kb/s -async is forwarded to lavfi similarly to -af aresample=async=1:min_hard_comp=0.10:first_pts=0. Output #0, wav, to 'I:\avirtualclass\webapps\openmeetings\streams\9\rec_8_stream_0_2014_03_16_13_54_53_WAVE.wav': Metadata: server : Red5 Server 1.0.0 RC3 Rev: 4393 creationdate : Sun Mar 16 14:00:06 GMT 2014 canSeekToEnd : true ISFT : Lavf55.34.101 Stream #0:0: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 22050 Hz, mono, s16, 352 kb/s Stream mapping: Stream #0:1 - #0:0 (nellymoser - pcm_s16le) Press [q] to stop, [?] for help size= 6741kB time=00:02:36.51 bitrate= 352.8kbits/s size= 13469kB time=00:05:12.74 bitrate= 352.8kbits/s video:0kB audio:13469kB subtitle:0 data:0 global headers:0kB
Audio only - how to adjust stream volume?
Hello, When in Audio and Video mode, it is possible to change the stream volume with the slider, but there is no slider when in 'Audio only' mode. How can users increase and decrease their microphone volume in 'audio only' mode? Thanks, Lee.
Re: How to stop users unmuting their microphones.
Thank you, Maxim. When A user 'asks a question' by pressing the icon to ask a question, and I accept the request, OM gives the user all rights by default. On Thu, Mar 20, 2014 at 3:19 AM, Maxim Solodovnik solomax...@gmail.comwrote: I guess you need to give user rights for audio/video (mic with plus icon) not moderator rights On Thu, Mar 20, 2014 at 1:06 AM, Lee Saunders leesenglishless...@gmail.com wrote: Hello, I've done some further testing on OM3. I opened up a room with myself and two attendees. 1] How can OM be set for mics to be globally muted upon entering a room? 2] Is it possible to prevent attendees from unmuting their microphones? 3] After attendee clicks to ask a question, granting rights does not unmute their microphone, but it does give them FULL moderator's rights, which could be dangerous. -- WBR Maxim aka solomax
red5-shutdown.bat does nothing.
Hello, Installed OM3.1 with existing DB (Moved persistance.xml). red5-shutdown.bat does not shutdown the instance of Red5. Via CMD window I see this message: I:\classes3\\conf\keystore.jmx was unexpected at this time. Thanks, Lee.
Re: red5-shutdown.bat does nothing.
Thank you. On Sun, Mar 30, 2014 at 11:18 AM, Maxim Solodovnik solomax...@gmail.comwrote: I'll double check On Sun, Mar 30, 2014 at 4:59 PM, Lee Saunders leesenglishless...@gmail.com wrote: Hello, Installed OM3.1 with existing DB (Moved persistance.xml). red5-shutdown.bat does not shutdown the instance of Red5. Via CMD window I see this message: I:\classes3\\conf\keystore.jmx was unexpected at this time. Thanks, Lee. -- WBR Maxim aka solomax
OM 3.1 does not recognise my microphone inputs
Hello, OM 3.1 only recognises my webcam as my audio device. My microphone is on a USB adapter as my default device, which works fine in OM 2 and 3.0, but not detected in 3.1. Video in OM 3.0 is juddered when in a class. It looks like frames are missing. In OM 2 and 3.1. live video is smooth. Thanks, Lee.
Time not changed for daylight saving
Hello, The clocks moved forward today, but OM 3 is 1 hour behind. How can I change it for daylight saving hours? Thank you, Lee.
Re: Time not changed for daylight saving
When creating rooms in from the calendar, the times that are set are 1 hour behind. The server is on my PC which is at GMT+1 I am also a test client on the same PC In OM Administration Configuration, the TZ is Europe/London: 33 default.timezone Europe/London I have attached screen shots that show the time discrepancy. All the best, Lee. On Sun, Mar 30, 2014 at 2:55 PM, Maxim Solodovnik solomax...@gmail.comwrote: Could you please describe more detailed What TZ are you using? Where do you see wrong time? (detailed steps to reproduce this would be appreciated) Additional info required: 1) server TZ 2) client machine TZ 3) client openmeetings TZ Thanks in advance On Sun, Mar 30, 2014 at 8:22 PM, Lee Saunders leesenglishless...@gmail.com wrote: Hello, The clocks moved forward today, but OM 3 is 1 hour behind. How can I change it for daylight saving hours? Thank you, Lee. -- WBR Maxim aka solomax attachment: OM Calendar entry.pngattachment: OM Confirmation.pngattachment: OM room creation.png
Re: OM 3.1 does not recognise my microphone inputs
Thank you. I'll go back to it. On Sun, Mar 30, 2014 at 2:50 PM, Maxim Solodovnik solomax...@gmail.comwrote: You definitely have 3.0.1 :) 3.1.0 is available here https://builds.apache.org/view/M-R/view/OpenMeetings/job/openmeetings/ On Sun, Mar 30, 2014 at 8:03 PM, Lee Saunders leesenglishless...@gmail.com wrote: Maybe I have OM 3.01. Where can I get 3.1.0? On Sun, Mar 30, 2014 at 11:50 AM, Maxim Solodovnik solomax...@gmail.comwrote: Seems to be this: https://issues.apache.org/jira/browse/OPENMEETINGS-959issue Should be fixed in both branches Never saw juddered video 3.0 and 2.x should have similar video (only screen-sharing was changed) 3.1 has newer Red5 might work better On Sun, Mar 30, 2014 at 5:29 PM, Lee Saunders leesenglishless...@gmail.com wrote: Hello, OM 3.1 only recognises my webcam as my audio device. My microphone is on a USB adapter as my default device, which works fine in OM 2 and 3.0, but not detected in 3.1. Video in OM 3.0 is juddered when in a class. It looks like frames are missing. In OM 2 and 3.1. live video is smooth. Thanks, Lee. -- WBR Maxim aka solomax -- WBR Maxim aka solomax
Re: Cannot upload libreoffice files
And me. I've had this problem for a long time. On Fri, Apr 11, 2014 at 4:44 PM, Rob Bunch r...@auctionaholics.com wrote: On 4/11/2014 7:06 AM, Giovanni wrote: Ok, here's what I've figured out reading openmeetings.log - Once you upload a .odt (for instance) it gets saved to /openmeetings/uploadtemp/files/ALPHANUMERIC.odt - JOD reads it and saves to /openmeetings/upload/files/ALFANUMERIC/ the conversion ALPHANUMERIC.swf and ALPHANUMERIC.odt itself. - openmeetings reads openmeetings/upload/files/ALPHANUMERIC/ALPHANUMERIC.swf and displays it onto the whiteboard My problem is: even though the JOD conversion is successful (the log says:START generate swf ALPHNUMERIC.swf) openmeetings can't find it in openmeetings/upload/files/ALPHANUMERIC/ because there's only the original ALPHANUMERIC.odt in there It's like JOD correctly generates the file but the it vanishes! Does anybody have a tip for me? Cheers! 2014-04-11 12:19 GMT+02:00 Giovanni giubb...@gmail.com: Hello everybody! I'm having troubles with uploading libreoffice files onto the whiteboard: as I select one, after the upload all I get is a big orange crossed rectangular box with deleted written on it. Checking the openoffice.log the only thing noticable is LOG DownloadHandler: The request file is not readable But I don't think is a privilege issue, since pdf and jpeg coming from the same directory are uploaded right. What it makes it ever more confusing is that I have a mirror system in a local PC with the same exact setup, and there it works perfectly! Both the remote and local server are Ubuntu 12.04 LTS servers. What could I check to troubleshoot this one? I don't understand what is causing the error (jod? libreoffice? openmeetings itself?)... Thank you in advance Hi Giovanni, I am actually having the same exact problem with my installation at this time. I have done some research into jodconverter and it turns out that there is a bug in the tag where the java errors if it is not java 1.5. The reference is located in the description here: https://code.google.com/p/jodconverter/downloads/detail?name=jodconverter-core-3.0-beta-4-dist.zipI have not figured out how to modify the jar file yet but it sounds like that is what needs done for both of us :) If I figure out how to do it I will supply a link to the modified file. -- Rob Bunch Manager, Auctionaholics LLC P.O. Box 1055 Ward Cove, AK 99928http://www.auctionaholics.com907-821-8520