forwarding to the correct list
On Wed, Jul 22, 2020 at 5:15 PM Henri Aanstoot wrote:
> Hi all,
>
> I've got 2 two node setup, image based installs.
> When doing ova exports or generic snapshots, things seem in order.
> Removing snapshots shows warning 'disk in illegal state'
>
> Mouse hover
Hi Miguel,
Do all hosts support the CPU type of the VM ?
Best Regards,
Strahil Nikolov
На 23 юли 2020 г. 0:58:50 GMT+03:00, miguel.gar...@toshibagcs.com написа:
>I had added a couple new hosts in my cluster (hyp16,hyp17) both
>followed the same procedure but at the moment to start vms all of
I had added a couple new hosts in my cluster (hyp16,hyp17) both followed the
same procedure but at the moment to start vms all of them goes to hyp16, if I
tried to migrate a vm to hyp 17 the migration task fails.
Here is the log trying to do migration:
2020-07-22 17:19:12,352-04 INFO
> I don't use them as multipathing generally works without OVirt bonds in
> my setup, I configured multipathd directly to use round robin e.g.
Thanks, Uwe. Am I understanding correctly that you're just letting your nodes
attach to the iSCSI storage on their own by leaving "node.startup =
On Mon, Jul 20, 2020 at 2:19 PM Emil Dumitrache
wrote:
> Hello,
> I am new to oVirt.
> I have a problem and I don't know how to deal with it, i added another
> network besides the management network and after that the node did not
> respond to the oVIrt manager.
> I had to change the DNS to the
On Mon, Jul 20, 2020 at 5:11 PM Marco Mangione
wrote:
> hello,
>
> anyone are using OVIRT with a SDN controller?
>
Which scenario do you want to address?
oVirt includes ovirt-provider-ovn, which supports isolated networks
> ___
> Users mailing list
Which version to use for Self-hosted deployment?
Thanks
Vijay Sachdeva
On 23/07/20, 1:12 AM, "Strahil Nikolov" wrote:
There is a bug whose fix is pending release.
Best Regards,
Strahil Nikolov
На 22 юли 2020 г. 17:54:11 GMT+03:00, Vijay Sachdeva via Users
There is a bug whose fix is pending release.
Best Regards,
Strahil Nikolov
На 22 юли 2020 г. 17:54:11 GMT+03:00, Vijay Sachdeva via Users
написа:
>Hello Everyone,
>
>
>
>Waiting for host to be up task is stuck for hours and when checked
>engine log found this below:
>
>
>
>2020-07-22
Hello all,
New 4.4.1 hosted-engine install. Pre-deploy, the host already had bond0 and its
iSCSI interfaces configured. The deploy correctly sets up the ovirtmgmt
interface using the bond, and when everything finishes up it's working as
expected. However, I then need to create a VLAN-based
Hello,
CentOS8, oVirt 4.4.1.10-1.el8
I am trying to setup active-backup (mode=1) bonding mode with custom
properties. I have one 10GE switch, the second is just 1G. 10GE link is
the primary one.
cat /etc/sysconfig/network-scripts/ifcfg-bond0
BONDING_OPTS="active_slave=ens5 downdelay=0
Anyone please can help me out on this.?
Vijay Sachdeva
From: Vijay Sachdeva
Date: Wednesday, 22 July 2020 at 8:24 PM
To: Florian Schmid via Users
Subject: Hosted Engine 4.4.1
Hello Everyone,
Waiting for host to be up task is stuck for hours and when checked engine log
found
You need to provode more details like storage type , any errors indicated,
somwthing changed recently, etc
Best Regards,
Strahil Nikolov
На 22 юли 2020 г. 13:15:06 GMT+03:00, Tarun Kushwaha
написа:
>My ovirt hosted engine storage got in locked state.
>Now I am unable to perform any
Hello Everyone,
Waiting for host to be up task is stuck for hours and when checked engine log
found this below:
2020-07-22 16:50:35,717+02 ERROR [org.ovirt.engine.core.sso.utils.SsoUtils]
(default task-1) [] OAuthException access_denied: Cannot authenticate user
'None@N/A': No valid
Hi,
We would like to join or develop some billing solution for oVirt.
Is there any billing solution under development? or testing phase ?
Mani
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy
Hi,
after digging a bit deeper, it looks like it is the problem with the
qemu-guest-agent.
It does only report the hostname and nothing more. It uses this function:
g_get_host_name ()
This function always returns the value in /etc/hostname and this is normally
the short name of the VM
> On 22 Jul 2020, at 13:05, Yedidyah Bar David wrote:
>
> On Wed, Jul 22, 2020 at 12:50 PM Andrei Verovski wrote:
>>
>> Hi !
>>
>> I have installed new oVirt 4.4 Engine (as separate entity, not hosted
>> engine) and migrated data from old 4.3 installation.
>> Everything went smooth.
>
>
Hi,
It appears to be a "Kaby Lake R" processor, what version of ovirt do you
run on what OS?
Did you enable nested virtualization for Virtualbox?
https://www.linuxtechi.com/enable-nested-virtualization-virtualbox-linux/
*By default nested virtualization in Oracle VM VirtualBox on linux
Hi,
The current SPF record reads:
v=spf1 a:mail.ovirt.org a:gerrit.ovirt.org 66.187.233.88 ~all
As pointed out, this is invalid. It requires an "ip4:" in there, so it
SHOULD read:
v=spf1 a:mail.ovirt.org a:gerrit.ovirt.org ip4:66.187.233.88 ~all
Arguably it should also include a /32, but
On Wed, Jul 22, 2020 at 3:57 PM Jorick Astrego wrote:
> Hi,
>
> During routine maintenance on our mailserver I noticed the following in
> the log:
>
> [22/Jul/2020 14:33:33] Error when parsing SPF TXT record for domain:
> ovirt.org, envelope-from=users-boun...@ovirt.org, message: Invalid
>
Hi,
During routine maintenance on our mailserver I noticed the following in
the log:
[22/Jul/2020 14:33:33] Error when parsing SPF TXT record for domain:
ovirt.org, envelope-from=users-boun...@ovirt.org, message: Invalid
character found near "" in "66.187.233.88"
A check on
Hi,
when you go to the Host details, General tab, there is a CPU Type field.
The info icon should list all CPU types supported by the host.
[image: Screenshot from 2020-07-22 14-25-36.png]
Hope that helps.
Lucia
On Tue, Jul 21, 2020 at 11:05 AM tommy wrote:
> Hi:
>
>
>
> 1.My server using as
Hello all,
I'm trying to export a VM as OVA on a single host hyper converged (over
NFS) 4.4 installation, and no matter which host destination directory I
set, with or without a trailing '/' (per bugzilla #1780424) the export
fails with the same error (see below).
Export into the export domain
On Wed, Jul 22, 2020 at 1:51 PM Vijay Sachdeva via Users
wrote:
> Anyone has any solution for this?
>
>
>
> Vijay Sachdeva
>
>
>
follow this bug for a, not released yet, fix:
https://bugzilla.redhat.com/show_bug.cgi?id=1858234
and several threads on list archives about related problems
Anyone has any solution for this?
Vijay Sachdeva
From: Vijay Sachdeva
Date: Wednesday, 22 July 2020 at 4:56 PM
To: None via Users
Subject: Hosted Engine | Ovirt 4.4.1
Hi Everyone
Getting below error when deploying hosted engine:
[ ERROR ] fatal: [localhost]: FAILED! =>
I think this:
https://www.ovirt.org/develop/developer-guide/engine/engine-config-examples.html
Or this:
https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.4-beta/html/administration_guide/sect-the_engine_configuration_tool
May help you.
Here is an example in the docs:
Hi Everyone
Getting below error when deploying hosted engine:
[ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 10, "changed": false,
"msg": "The Python 2 yum module is needed for this module. If you require
Python 3 support use the `dnf` Ansible module instead."}
Any idea how to
I ran into this link while searching, how can i change it using engine-config?
I see no reference there.
Thanks
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement:
Please find the result:
psql -d engine -c "\x on" -c "select * from images where image_group_id =
'd7bd480d-2c51-4141-a386-113abf75219e';"
Expanded display is on.
-[ RECORD 1 ]-+-
image_guid| 8e412b5a-85ec-4c53-a5b8-dfb4d6d987b8
Hi,
On Wed, Jul 22, 2020 at 1:07 PM Yedidyah Bar David wrote:
> On Wed, Jul 22, 2020 at 12:50 PM Andrei Verovski
> wrote:
> >
> > Hi !
> >
> > I have installed new oVirt 4.4 Engine (as separate entity, not hosted
> engine) and migrated data from old 4.3 installation.
> > Everything went
My ovirt hosted engine storage got in locked state.
Now I am unable to perform any activity on this domain so guide me through how
to unlock “hosted_storage” domain.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to
On Wed, Jul 22, 2020 at 12:50 PM Andrei Verovski wrote:
>
> Hi !
>
> I have installed new oVirt 4.4 Engine (as separate entity, not hosted engine)
> and migrated data from old 4.3 installation.
> Everything went smooth.
Can you please clarify exactly what you did? Did you use engine-backup
Hi !
I have installed new oVirt 4.4 Engine (as separate entity, not hosted engine)
and migrated data from old 4.3 installation.
Everything went smooth.
Q: Which PostgreSQL password now active - new one I entered during install or
old which could migrate with old data?
I noticed GUI changes
On Wed, Jul 22, 2020 at 12:10 PM Marco Marino wrote:
>
> Yes, it seems. Thank you.
> Anyway, I'm checking ansible playbook:
> /usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-host-deploy-facts/tasks/main.yml
> (line 2):
>
> - name: Detect host operating system
>
Yes, it seems. Thank you.
Anyway, I'm checking ansible playbook:
/usr/share/ovirt-engine/ansible-runner-service-project/project/roles/ovirt-host-deploy-facts/tasks/main.yml
(line 2):
- name: Detect host operating system
set_fact:
el_ver: "{{ ansible_distribution_major_version|int
if
On Wed, Jul 22, 2020 at 11:53 AM Marco Marino wrote:
>
> Hi,
> my logs as attachment. Please note that each file has a suffix like "host1_"
> or "engine_" that means from which server log come from.
> Anyway, in engine_host1_deploy.log I see an error during the playbook
> execution:
Hi,
my logs as attachment. Please note that each file has a suffix like
"host1_" or "engine_" that means from which server log come from.
Anyway, in engine_host1_deploy.log I see an error during the playbook
execution: "module_stdout" : "/bin/sh: /usr/bin/python2: No such file or
directory\r\n"
On Wed, Jul 22, 2020 at 11:11 AM wrote:
>
> Hi, after the upgrade from 4.4.1 to 4.4.1.1, it seems that I cannot reinstall
> adding custom kernel settings. In my case, I'm trying to add
> "ixgbe.allow_unsupported_sfp=1" to cmdline but reinstall process fails
> without showing any relevant error
Hi, after the upgrade from 4.4.1 to 4.4.1.1, it seems that I cannot reinstall
adding custom kernel settings. In my case, I'm trying to add
"ixgbe.allow_unsupported_sfp=1" to cmdline but reinstall process fails without
showing any relevant error in /var/log/vdsm/vdsm.log. I did the same test on
Hello Gianluca,
thanks for opening the bug. I have also reported my test scenario below.
(One thing more in my case, the standalone Manager needs to be installed on EL8
and not like documents says on EL7.
With EL7 load is gives an error that Engine for EL7 is not avaiable. Document
needs to be
Thank you,
It really works!!
发件人: Eyal Shenitzky
发送时间: 2020年7月22日 13:50
收件人: tommy
抄送: users
主题: Re: [ovirt-users] how to remove host (phisical damaged) on ovirt web panel
??
Hi Tommy,
I am not sure about your environment state, but you have an option to
40 matches
Mail list logo
