Imagine you got a host with 60 Spinning Disks -> I would recommend you to split
it to 10/12 disk groups and these groups will represent several bricks (6/5).
Keep in mind that when you start using many (some articles state hundreds , but
no exact number was given) bricks , you should consider
Hello,
I am getting some questions from others on my team.
I have some hosts that could provide up to 6 JBOD disks for oVirt data (not
arbiter) bricks
Would this be workable / advisable ? I'm under the impression there should
not be more than 1 data brick per HCI host .
Please correct me if
On 10/13/2020 5:01 PM, Michael Thomas wrote:
After getting past the proxy issue, I was finally able to run the
engine-setup --reconfigure-optional-components. The new
ManagedBlockStorage storage domain exists, and I was able to create a
disk. However, I am unable to attach the disk to a
After getting past the proxy issue, I was finally able to run the
engine-setup --reconfigure-optional-components. The new
ManagedBlockStorage storage domain exists, and I was able to create a
disk. However, I am unable to attach the disk to a running VM.
The engine.log shows the following,
Setting both http_proxy and https_proxy fixed the issue.
Thanks for the tip!
--Mike
I am not sure, it's been a long time since I tried that.
Feel free to file a bug.
You can also try setting env var 'http_proxy' for engine-setup, e.g.:
http_proxy=MY_PROXY_URL engine-setup
One recommendation is to get rid of the multipath for your SSD.
Replica 3 volumes are quite resilient and I'm really surprised it happened to
you.
For the multipath stuff , you can create something like this:
[root@ovirt1 ~]# cat /etc/multipath/conf.d/blacklist.conf
blacklist {
wwid
On Tue, Oct 13, 2020 at 5:56 PM Nir Levy wrote:
>
>
>
> On Tue, Oct 13, 2020 at 5:51 PM Nir Soffer wrote:
>>
>> On Tue, Oct 13, 2020 at 4:20 PM Yedidyah Bar David wrote:
>> >
>> > On Tue, Oct 13, 2020 at 1:11 PM Yedidyah Bar David wrote:
>> > >
>> > > On Thu, Oct 8, 2020 at 1:01 PM
I hope it is not too forward of me to only send it to you.
Yours Sincerely,
Henni
-Original Message-
From: Yedidyah Bar David
Sent: Tuesday, 13 October 2020 16:42
To: i...@worldhostess.com
Cc: Edward Berger ; users
Subject: [ovirt-users] Re: 20+ Fresh Installs Failing in 20+ days
On Tue, Oct 13, 2020 at 5:51 PM Nir Soffer wrote:
> On Tue, Oct 13, 2020 at 4:20 PM Yedidyah Bar David
> wrote:
> >
> > On Tue, Oct 13, 2020 at 1:11 PM Yedidyah Bar David
> wrote:
> > >
> > > On Thu, Oct 8, 2020 at 1:01 PM gantonjo-ovirt--- via Users
> > > wrote:
> > > >
> > > > So, we have a
What is the longevity status of cockpit-machines-ovirt ?
I understand it was removed from automatically being in node, due to perceived
redundancy.
But is the software package itself going away and/or not going to be usable in
the future?
- Original Message -
From: "Sandro Bonazzola"
On Tue, Oct 13, 2020 at 4:20 PM Yedidyah Bar David wrote:
>
> On Tue, Oct 13, 2020 at 1:11 PM Yedidyah Bar David wrote:
> >
> > On Thu, Oct 8, 2020 at 1:01 PM gantonjo-ovirt--- via Users
> > wrote:
> > >
> > > So, we have a cluster of 3 servers running oVirt Node 4.4.1. Now we are
> > >
Hi to all.
Can someone confirm to me the value of max domains per data center on
ovirt 4.4 ?
We found only this for RHEV: https://access.redhat.com/articles/906543
Regards,
Tommaso.
--
--
Shellrent - Il primo hosting italiano Security First
*Tommaso De Marchi*
Many thanks, Didi, Gianluca!
Via Invite + usern...@ad.domain.name Everything worked out! )))
Is it possible to use a file /etc/grafana/ldap.toml for configure
authentication in the Active Directory?
___
Users mailing list -- users@ovirt.org
To
Hi, Didi.
The command "find / -xdev -path "*/dom_md/metadata" -not -empty -not -type l"
shows no storage domains, so I guess this would solve the "false positive" list
of storage domains that are not really mounted to the node we want to update.
___
On Tue, Oct 13, 2020 at 3:27 PM Yedidyah Bar David wrote:
> On Tue, Oct 13, 2020 at 3:48 PM Dmitry Kharlamov
> wrote:
> >
> > Good afternoon, Lucie! Thanks for the info.
> >
> > After reinstalling engine with --reconfigure-optional-components Grafana
> is work and link to Monitoring portal
Hi Nikolov,
Thanks for the very interesting answer :-)
I do not use any raid controller. I was hoping glusterfs would take care of
fault tolerance but apparently it failed.
I have one Samsung 1TB SSD drives in each server for VM storage. I see it is of
type "multipath". There is XFS
On Tue, Oct 13, 2020 at 3:48 PM Dmitry Kharlamov wrote:
>
> Good afternoon, Lucie! Thanks for the info.
>
> After reinstalling engine with --reconfigure-optional-components Grafana is
> work and link to Monitoring portal present on home page.
> SSO works the same way, but only for Internal
On Tue, Oct 13, 2020 at 1:11 PM Yedidyah Bar David wrote:
>
> On Thu, Oct 8, 2020 at 1:01 PM gantonjo-ovirt--- via Users
> wrote:
> >
> > So, we have a cluster of 3 servers running oVirt Node 4.4.1. Now we are
> > attempting to upgrade it to latest version, 4.4.2, but it fails as shown
> >
Good afternoon, Lucie! Thanks for the info.
After reinstalling engine with --reconfigure-optional-components Grafana is
work and link to Monitoring portal present on home page.
SSO works the same way, but only for Internal users. Users ActiveDirectory
cannot enter the Monitoring Portal -
Hi again.
Just did a test. I unmapped the node from the iSCSI SAN and rebooted the node.
After reboot, the storage domains still where listed as / storage domains. In
other words, this was not a solution.
___
Users mailing list -- users@ovirt.org
To
Hi, Didi.
Thanks for your answer. Unfortunately the suggested command shows the same
storage domains as I listed above. The node is in Maintenance (as it would be
when Installing an update from the GUI). None of these storage domains are
mounted on the node ( at least not visible when running
i am trying to downgrade collectd version on oVirt engine from 5.10.0 to 5.8.4
using ansible, but getting error while doing so. Can someone help to fix issue
--
Ansible yml file
---
- name: Perform a yum clean
command: /usr/bin/yum clean all
- name: downgrade collectd
Hi community! I have some issue as https://bugzilla.redhat.com/show_bug.cgi?id=1855321VM from template can't start too.Cluster version 4.2 (LibgfApiSupported=true). VM rXX-TEST is down with error. Exit message: internal error: qemu unexpectedly closed the monitor: [2020-10-13 10:29:08.503719] E
On Thu, Oct 8, 2020 at 1:01 PM gantonjo-ovirt--- via Users
wrote:
>
> So, we have a cluster of 3 servers running oVirt Node 4.4.1. Now we are
> attempting to upgrade it to latest version, 4.4.2, but it fails as shown
> below. Problem is that the Storage domains listed are all located on an
>
On Sat, Oct 10, 2020 at 10:13 AM Martin Perina wrote:
[snip]
>> Can I replicate the command that the engine would run on host through ssh?
>>
>
> I don't think so there is an easy way to do it
> Let's see what else we can get from the logs...
>
> Martin
>
>
Hi,
I've run on engine the command
Hi Dmitry,
On 10/10/20 8:36 AM, Dmitry Kharlamov wrote:
Good day!
Made a fresh installation of 4.4.2 Self Hosted Engine (not an upgrade from
4.4.1) however there is no link to the Monitoring portal on the home page.
Service ovirt-engine-dwhd started and work. Grafana-server service not
On Tue, Oct 13, 2020 at 12:25 PM Tim Bordemann via Users
wrote:
>
>
>
> > On 13. Oct 2020, at 10:01, Vojtech Juranek wrote:
> >
> > On úterý 13. října 2020 9:37:11 CEST Tim Bordemann wrote:
> >>> On 12. Oct 2020, at 12:15, Vojtech Juranek wrote:
> >>>
> >>> On pátek 9. října 2020 19:02:32 CEST
Hi,
Fixes were added in the 2 tasks that were mentioned:
1. The command that we run to check for updates:
https://gerrit.ovirt.org/#/c/110713/
2. Making sure that cache is up to date is done only once and not for each
package: https://gerrit.ovirt.org/#/c/111419/
Thanks,
Dana
On Mon, Oct 12,
> On 13. Oct 2020, at 10:01, Vojtech Juranek wrote:
>
> On úterý 13. října 2020 9:37:11 CEST Tim Bordemann wrote:
>>> On 12. Oct 2020, at 12:15, Vojtech Juranek wrote:
>>>
>>> On pátek 9. října 2020 19:02:32 CEST tim-nospam--- via Users wrote:
Hello.
After an upgrade I am not
Please share all of /var/log/ovirt-hosted-engine-setup:
cd /var/log/
tar czf ovirt-hosted-engine-setup.tar.gz ovirt-hosted-engine-setup
Then upload ovirt-hosted-engine-setup.tar.gz to some file sharing
service (e.g. dropbox, google drive etc.) and share the link.
Thanks!
On Tue, Oct 13, 2020
On úterý 13. října 2020 9:37:11 CEST Tim Bordemann wrote:
> > On 12. Oct 2020, at 12:15, Vojtech Juranek wrote:
> >
> > On pátek 9. října 2020 19:02:32 CEST tim-nospam--- via Users wrote:
> >> Hello.
> >>
> >> After an upgrade I am not able to upload images anymore via the ovirt ui.
> >> When
Hi,
Please share all of /var/log/ovirt-hosted-engine-setup.
The last point in the logs you attached is in task 'Check engine VM health'.
This runs a loop of 'hosted-engine --vm-status --json' but did not
finish (yet?).
Thanks and best regards,
On Tue, Oct 13, 2020 at 5:35 AM wrote:
>
> Hope
> On 12. Oct 2020, at 12:15, Vojtech Juranek wrote:
>
> On pátek 9. října 2020 19:02:32 CEST tim-nospam--- via Users wrote:
>> Hello.
>>
>> After an upgrade I am not able to upload images anymore via the ovirt ui.
>> When testing the connection, I always get the error message "Connection to
> On 12. Oct 2020, at 13:56, Nir Soffer wrote:
>
>
>
> On Sun, Oct 11, 2020, 11:58 tim-nospam--- via Users wrote:
> Hello.
>
> After an upgrade I am not able to upload images anymore via the ovirt ui.
> When testing the connection, I always get the error message "Connection to
>
34 matches
Mail list logo