In the replica 3 + 1 arbiter does this mean that if I loose the two nodes
having the normal volumes and left only with the node that has the arbiter
volume, I loose all data?
Thanx,
Alex
On Fri, Sep 15, 2017 at 11:25 AM, Kasturi Narra wrote:
> Hi ,
>
>yes, you are right. Since arbiter brick
mmm, perhaps one more reason to go to simple replica 3...
Thanx,
Alex
On Fri, Sep 15, 2017 at 3:30 PM, Sahina Bose wrote:
>
>
> On Fri, Sep 15, 2017 at 5:48 PM, Alex K wrote:
>
>> In the replica 3 + 1 arbiter does this mean that if I loose the two nodes
>> having the
Hi all,
I have replica 3 with 1 arbiter.
When checking the gluster volume bricks they are reported as using
different space, as per attached. How come they use different space? One
would expect to use exactly the same space since they are replica.
Thanx,
Alex
_
Thanx, I can confirm that this way i may transfer VMs, but I was thinking a
more dirty and perhaps portable way.
Say I want to get to a external disk just one VM from DC A and copy/import
it on DC B that has no access to the export domain of DC A.
I've seen also articles converting the VM disk to
usage of data
on the data volumes, except the "vms" volume used for storing vms.
Thanx,
Alex
On Sep 18, 2017 07:00, "Ravishankar N" wrote:
>
>
> On 09/17/2017 08:41 PM, Alex K wrote:
>
> Hi all,
>
> I have replica 3 with 1 arbiter.
> When checking th
size at some point from 4 MB to 64MB.
Could this be the cause?
Thanx,
Alex
On Mon, Sep 18, 2017 at 8:14 AM, Ravishankar N
wrote:
>
> On 09/18/2017 10:08 AM, Alex K wrote:
>
> Hi Ravishankar,
>
> I am not referring to the arbiter volume(which is showing 0% usage). I am
> ref
ize.
>
> -Ravi
>
>
> On 09/18/2017 11:40 AM, Alex K wrote:
>
> The heal status is showing that no pending files need healing (also shown
> at GUI).
> When checking the bricks on the file system I see that what is different
> between the server is the .shard folder of
Hi All,
When I get console of a Windows VM (Windows 10 x64bit) I am requested to
authenticate and then the user is disconnected (though not logged out as
the apps of the user are still open).
I have tested this with QXL/SPICE and VGA/VNC console mode.
Is there any mode at oVirt console to get con
Hi All,
I have the following issue with the HA behavior of oVirt 4.1 and need to
check with you if there is any work around from your experience.
I have 3 servers (A, B, C) with hosted engine in self hosted setup on top
gluster with replica 3 + 1 arbiter. All good except one point:
The hosts hav
Enabling VM leases could be an answer to this. Will test tomorrow.
Thanx,
Alex
On Sep 18, 2017 7:50 PM, "Alex K" wrote:
Hi All,
I have the following issue with the HA behavior of oVirt 4.1 and need to
check with you if there is any work around from your experience.
I have 3 server
Hi All,
Just completed the tests and it works great.
VM leases is just what I needed.
Thanx,
Alex
On Tue, Sep 19, 2017 at 10:16 AM, Yaniv Kaul wrote:
>
>
> On Tue, Sep 19, 2017 at 1:00 AM, Alex K wrote:
>
>> Enabling VM leases could be an answer to this. Will test tomorr
ide at some point to shutdown
the paused VMs and continue with the VMs that are already running at other
hosts.
Is this behavior normal?
Thanx,
Alex
On Tue, Sep 19, 2017 at 10:18 AM, Alex K wrote:
> Hi All,
>
> Just completed the tests and it works great.
> VM leases is just what I need
, 2017 at 11:41 AM, Alex K wrote:
>
>> Hi again,
>>
>> I performed a different test by isolating one host (say host A) through
>> removing all its network interfaces (thus power management through IPMI was
>> also not avaialble).
>> The VMs (with VM lease
On Tue, Sep 19, 2017 at 2:26 PM, Arik Hadas wrote:
>
> On Tue, Sep 19, 2017 at 12:44 PM, Alex K wrote:
>
>> A second test did not yield the same result.
>> This time the VMs were restarted to another host and when the lost host
>> recovered no VMs were running on i
Hi all,
I am trying to get the VM console of a VM through SSH socks proxy.
This is a scenario I will frequently face, as the ovirt cluster will be
available only though a remote SSH tunnel.
I am trying several console options without success.
With SPICE or VNC I get issue with virt-viewer saying
Any idea how this can be addressed?
On Sep 19, 2017 23:07, "Alex K" wrote:
Hi all,
I am trying to get the VM console of a VM through SSH socks proxy.
This is a scenario I will frequently face, as the ovirt cluster will be
available only though a remote SSH tunnel.
I am trying sever
downloading the vv file before
> the password expires.
>
> On 5 October 2017 at 22:58, Alex K wrote:
> > Any idea how this can be addressed?
> >
> >
> > On Sep 19, 2017 23:07, "Alex K" wrote:
> >
> > Hi all,
> >
> > I am trying t
Hi all,
While attempting to enable the VM leases for a specific VM I am receiving
the following error within the engine.log:
2017-10-18 07:56:03,186Z ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(org.ovirt.thread.pool-6-thread-18) [37c74b60] EVENT_ID:
HOT_PLUG_LEAS
b order by start_time desc;
select DeleteJob('');
Alex
On Wed, Oct 18, 2017 at 1:07 PM, Alex K wrote:
> Hi all,
>
> While attempting to enable the VM leases for a specific VM I am receiving
> the following error within the engine.log:
>
> 2017-10-18 07:56:03
Hi all,
I have setup a self hosted setup with 3 servers with several volumes in
replica 3.
These gluster volumes are set on a separate network (on separate NICs on
same servers), dedicated for gluster traffic. The engine does not have any
NIC in this network.
The ISO storage domain is also on top
performance of storage network.
Alex
On Oct 18, 2017 11:36 PM, "Elad Ben Aharon" wrote:
> Hi,
>
> The storage where 'ISO' storage domain resides has to be reachable for the
> engine server. Please check network connectivity between the two.
>
> On Wed,
domain.
Alex
On Thu, Oct 19, 2017 at 12:09 AM, Alex K wrote:
> If this is the case then I will try to set the gluster network to be at
> the network that engine can reach prior to adding the ISO domain. I would
> prefere not to add an additional interface to engine as then I will need to
&
work, you can just scp
> the file to /mnt//images/11--11
> 11-…/
>
> Hope this helps !!!
>
> Thanks
> kasturi
>
>
> On Thu, Oct 19, 2017 at 1:23 PM, Alex K wrote:
>
>> The only workaround that seems to work for my case is the following:
>
Filed *Bug 1507214* <https://bugzilla.redhat.com/show_bug.cgi?id=1507214>
for this issue
Alex
On Wed, Oct 18, 2017 at 3:36 PM, Nir Soffer wrote:
> On Wed, Oct 18, 2017 at 2:31 PM Alex K wrote:
>
>> For anyone that might be wondering, this errors disappeared after
>> re
On Thu, Nov 14, 2019, 01:25 wrote:
> Thank Jayme,
> It worked, wondering if there is a more straight fwd way.
>
You can also export to ova, and then upload the ova.
>
> regards,
> ___
> Users mailing list -- users@ovirt.org
> To unsubscribe send an
On Thu, Dec 19, 2019, 17:29 Vrgotic, Marko
wrote:
> Dear oVIrt,
>
>
>
> I am trying to install Windows 10 on oVirt, following procedure on:
>
>
> https://www.ovirt.org/documentation/vmm-guide/chap-Installing_Windows_Virtual_Machines.html
>
>
>
> Unfortunately, there is no option as explained in t
On Fri, Jan 10, 2020, 20:12 Christian Reiss
wrote:
> Hey,
>
> is there really no ovirt native way to restore a single host and bring
> it back into the cluster?
>
I'm not sure if all can be done from gui. I would manually configure
gluster and do the host install from gui.
>
> -Chris.
>
> On 07.
On Mon, Jan 13, 2020 at 12:36 AM wrote:
> Well if *you* don't see any issues then we can finally sleep at night.
>
You mentioned issues with bugzilla or did I understood wrong? You are not
able to open a bug? Went to bugzilla and it seems that the process to open
a bug functions properly. In case
On Mon, Jan 13, 2020 at 11:23 AM wrote:
> I was not able to open a bug I was getting several different errors from
> bugzilla. But of course after a while it was working again. Someone
> restarted the web server. Now everything is OK but the experience of
> entering bugs in that tool is/was horri
Hi,
On Tue, Jan 14, 2020 at 7:51 PM wrote:
> I don't have power management devices on the Intel NUC. You probably
> missed the message where I posted this because of
> https://lists.ovirt.org/archives/list/users@ovirt.org/thread/4WRVQKDASO7YORTR24UINCHVGAWWXU4T/
> .
>
For production you will ne
On Fri, Feb 14, 2020, 20:48 Diggy Mc wrote:
> Are there any known issues with running the Zabbix agent on either the
> Hosted Engine (4.3.8) or oVirt Nodes (4.3.8) ??? I'd like to install the
> agent while not crashing my hosting environment.
>
I've done that and have seen no issues for several
On Sat, Feb 29, 2020, 18:38 wrote:
> I have a network in place with several subnets, one for iscsi and one for
> virtual pbx and VoIP phones. I use the iscsi in Ovirt, but I cannot get
> Ovirt to recognize and use the physical vlan 3 network for phones. If I add
> it and the subnet, Ovirt will ma
test email.
for some reason I do not receive messages from this mailing list.
Alex
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
ote:
> On Mon, Jan 1, 2018 at 8:43 PM, Alex K wrote:
>
>> Hi all and Happy New Year!
>>
>> I have a ovirt 4.1.3.5 cluster (running with 3 nodes and shared gluster
>> storage).
>> I have randomly observed that some Windows 10 64bit VMs are reported from
>&
Hi all and Happy New Year!
I have a ovirt 4.1.3.5 cluster (running with 3 nodes and shared gluster
storage).
I have randomly observed that some Windows 10 64bit VMs are reported from
engine dashboard with 100%CPU while when connecting within the VM the CPU
utilization is normal.
Sometimes, when re
Hi all,
Is the ISO at
http://plain.resources.ovirt.org/pub/ovirt-4.2/iso/oVirt-toolsSetup/4.2-1.el7.centos/
the latest guest tools? I'm interested for Windows 2016 and Windows 10.
Thanx,
Alex
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.or
Thanx,
Installed and seems to be working nicely.
Alex
On Wed, Jan 17, 2018 at 8:36 AM, Yedidyah Bar David wrote:
> On Tue, Jan 16, 2018 at 11:33 PM, Alex K wrote:
> > Hi all,
> >
> > Is the ISO at
> > http://plain.resources.ovirt.org/pub/ovirt-4.2/iso/oVirt-
&g
Hi All,
I have a 3 server ovirt 4.1 selft hosted setup with gluster replica 3.
I see that suddenly one of the hosts reported as unresponsive and at same
time the /var/log/messages logged:
ovirt-ha-broker ovirt_hosted_engine_ha.broker.listener.ConnectionHandler
ERROR Error handling request, data:
gt; we havent backported the fix yet.
>
> Best regards
>
> Martin Sivak
>
> On Fri, Jan 19, 2018 at 1:01 PM, Alex K wrote:
> > Hi All,
> >
> > I have a 3 server ovirt 4.1 selft hosted setup with gluster replica 3.
> >
> > I see that suddenly one
Hi all,
I have a cluster with 3 nodes, using ovirt 4.1 in a self hosted setup on
top glusterfs.
On some VMs (especially one Windows server 2016 64bit with 500 GB of disk).
Guest agents are installed at VMs. i almost always observe that during the
backup of the VM the VM is rendered unresponsive (d
with it so far.
> have you checked engine log file ?
>
>
> --
>
> Respectfully
> *Mahdi A. Mahdi*
>
> --
> *From:* users-boun...@ovirt.org on behalf of
> Alex K
> *Sent:* Wednesday, January 24, 2018 4:18 PM
> *To:* users
> *Subj
Ok. I will reproduce and collect logs.
Thanx,
Alex
On Jan 29, 2018 20:21, "Mahdi Adnan" wrote:
I have Windows VMs, both client and server.
if you provide the engine.log file we might have a look at it.
--
Respectfully
*Mahdi A. Mahdi*
--
*From:* Ale
Hi all,
I have a 3 nodes ovirt 4.1 cluster, self hosted on top of glusterfs. The
cluster is used to host several VMs.
I have observed that when gateway is lost (say the gateway device is down)
the ovirt cluster goes down.
It seems a bit extreme behavior especially when one does not care if the
ho
Hi all,
I have a stuck snapshot removal from a VM which is blocking the VM to
start.
In ovirt 4.1 I was able to cancel the stuck task by running within SPM
host:
vdsClient -s 0 getAllTasksStatuses
vdsClient -s 0 stopTask
Is there a similar way to do at ovirt 4.2?
Thanx,
Alex
__
> Thanks,
> Edy.
>
>
> On Mon, Feb 5, 2018 at 2:19 PM, Alex K wrote:
>
>> Hi all,
>>
>> I have a 3 nodes ovirt 4.1 cluster, self hosted on top of glusterfs. The
>> cluster is used to host several VMs.
>> I have observed that when gateway is lost
replaced by vdsm-client[1]
>
> [1] - https://www.ovirt.org/develop/developer-guide/vdsm/vdsm-client/
>
> On Tue, Feb 6, 2018 at 10:17 AM, Alex K wrote:
>
>> Hi all,
>>
>> I have a stuck snapshot removal from a VM which is blocking the VM to
>> start.
Hi,
I have seen hosts rendered unresponsive when gateway is lost.
I will be able to provide more info once I prepare an environment and test
this further.
Thanx,
Alex
On Tue, Feb 6, 2018 at 10:40 AM, Yaniv Kaul wrote:
>
>
> On Feb 5, 2018 2:21 PM, "Alex K" wrote:
>
&g
Hi all,
In case you need any further logs let me know.
Thanx for the time.
Alex
On Thu, Feb 8, 2018 at 9:41 AM, Alex K wrote:
> Hi Shani,
>
> Didn't notice that.
> I am attaching later vdsm logs.
>
> Thanx,
> Alex
>
> On Wed, Feb 7, 2018 at 5:31 PM, Shani Levii
Hi,
did you select "Deploy" when adding the new host?
See attached.
[image: Inline image 2]
Thanx,
Alex
On Fri, Feb 9, 2018 at 9:53 AM, Reznikov Alexei
wrote:
> Hi all!
>
> After upgrade from ovirt 4.0 to 4.1, a have trouble add to next
> HostedEngine host to my cluster via webui... host add
Hi all,
Is this version considered production ready?
Thanx,
Alex
On Mon, Feb 12, 2018 at 7:14 PM, Sandro Bonazzola
wrote:
>
>
> 2018-02-12 17:43 GMT+01:00 Gianluca Cecchi :
>
>> On Mon, Feb 12, 2018 at 4:22 PM, Lev Veyde wrote:
>>
>>> The oVirt Project is pleased to announce the availability
Thanx!
On Tue, Feb 13, 2018 at 12:54 PM, Sandro Bonazzola
wrote:
>
>
> 2018-02-13 11:42 GMT+01:00 Alex K :
>
>> Hi all,
>>
>> Is this version considered production ready?
>>
>
> Yes, 4.2.1 is considered production ready
>
>
>
>
>>
Thank you Nir for the below.
I am putting some comments inline in blue.
On Tue, Feb 13, 2018 at 7:33 PM, Nir Soffer wrote:
> On Wed, Jan 24, 2018 at 3:19 PM Alex K wrote:
>
>> Hi all,
>>
>> I have a cluster with 3 nodes, using ovirt 4.1 in a self hosted setup on
>
Yes you can.
On Feb 15, 2018 23:09, "Mark Steele" wrote:
> I have with no joy.
>
> Question: Can I restart the HostedEngine with running VM's without
> negatively impacting them?
>
>
> ***
> *Mark Steele*
> CIO / VP Technical Operations | TelVue Corporation
> TelVue - We Share Your Vision
> 1600
Did you try partprobe and pvscan before pvcreate?
On Feb 16, 2018 01:23, "Matt Simonsen" wrote:
> Hello all,
>
> This may not be oVirt specific (but it may be) so thank you in advance for
> any assistance.
>
> I have a system installed with oVirt Node Next 4.1.9 that was installed to
> /dev/sda
For a proper upgrade there are specific steps that you follow for each host
and the engine.
I usually upgrade the hosts first then the engine. If you have spare
resources so as to put hosts at maintenance then the upgrade should be
seamless. Also i think you need to go strp by step: 3.5 -> 3.6 ->
Hi all,
I had put a specif email alert during the deploy and then I wanted to
change it.
I did the following:
At one of the hosts ra:
hosted-engine --set-shared-config destination-emails ale...@domain.com
--type=broker
systemctl restart ovirt-ha-broker.service
I had to do the above since chang
Hi all,
I am running a 3 node ovirt 4.1 selft hosted setup.
I have consistently observed that windows 10 VMs with SPICE console fail to
live migrate. Other VMs (windows server 2016) do migrate normally.
VDSM log indicates:
internal error: unable to execute QEMU command 'migrate': qxl: guest bug:
Seems that this is due to:
https://bugzilla.redhat.com/show_bug.cgi?id=1446147
I will check If i can find newer guest agents.
On Sun, Feb 18, 2018 at 1:46 PM, Alex K wrote:
> Hi all,
>
> I am running a 3 node ovirt 4.1 selft hosted setup.
> I have consistently observed that wi
?
Thanx,
Alex
On Sun, Feb 18, 2018 at 1:53 PM, Alex K wrote:
> Seems that this is due to:
>
> https://bugzilla.redhat.com/show_bug.cgi?id=1446147
>
> I will check If i can find newer guest agents.
>
> On Sun, Feb 18, 2018 at 1:46 PM, Alex K wrote:
>
>> Hi all,
>>
On Sun, Feb 18, 2018 at 4:25 PM, Michal Skrivanek <
michal.skriva...@redhat.com> wrote:
>
>
> On 18 Feb 2018, at 13:09, Alex K wrote:
>
> I see that the latest guest tools for 4.1 are dated 27-04-2017.
>
> http://resources.ovirt.org/pub/ovirt-4.1/iso
Hi all,
Are there any examples on using ovirt-imageio to backup a VM or where I
could find details of RESTAPI for this functionality?
I might attempt to write a python script for this purpose.
Thanx,
Alex
On Tue, Feb 13, 2018 at 8:59 PM, Alex K wrote:
> Thank you Nir for the below.
>
You may try to put host in maintenance then reinstall by deploying engine
also.
On Feb 19, 2018 1:14 PM, "Artem Tambovskiy"
wrote:
> Hello,
>
> Last weekend my cluster suffered form a massive power outage due to human
> mistake.
> I'm using SHE setup with Gluster, I managed to bring the cluster
Try putting lanplus=1 at the options and test again
On Feb 19, 2018 4:10 PM, wrote:
> Hi!
>
>
>
> When configuring Powermanagement respectively Fence Agent I get following
> error:
>
> Any idea on this?
>
>
>
> 2018-02-19 15:01:26,625+01 INFO [org.ovirt.engine.core.
> vdsbroker.vdsbroker.FenceV
You define your networks then under cluster-> logical networks you select
which one will be used for migration.
On Feb 19, 2018 4:53 PM, "simone.sa...@trssistemi.com" <
simone.sa...@trssistemi.com> wrote:
> Hello to everyone,
>
> I have founded the article "How to specify a logical network for RH
You can overwrite the console ip at cluster -> console. Try to put there
the external ip and have NAT correctly set. This should work.
Alex
On Feb 27, 2018 12:15, "Fabrice SOLER"
wrote:
> Hi,
>
> We want to install ovirt for every school in Guadeloupe (~70 schools)
>
> Each school has an inter
This link was working.
Can someone check this to restore access?
Thanx,
Alex
On Tue, Mar 13, 2018 at 1:57 PM, Nathanaël Blanchet
wrote:
> sorry, but your link is broken
>
> Le 12/03/2018 à 19:33, Victor José Acosta Domínguez a écrit :
>
> http://blog.infratic.com/blog/2017/07/07/create-ovirtrhe
Thanx.
Now the link is ok.
Alex
On Wed, Mar 14, 2018 at 5:25 PM, Yaniv Kaul wrote:
>
>
> On Wed, Mar 14, 2018 at 5:19 PM, Alex K wrote:
>
>> This link was working.
>> Can someone check this to restore access?
>>
>
> Surprisingly, you can go to http://blog.
I was testing Open Bacchus and backups were ok.
One issue that I see is that one cannot define how many backup copies to
retain, unless I missed sth.
Alex
On Mon, Mar 5, 2018 at 5:25 PM, Niyazi Elvan wrote:
> Hi,
>
> If you are looking for VM image backup, you may have a look at Open
> Bacchus
Hi All,
I was trying to upload a VM disk at data storage domain using a python
script.
I did cancel the upload twice and at the third time the upload was
successful, but I see two disks from the previous attempts with status
"transferring via API" (see attached). This status of for more then 8 hou
Even after rebooting the engine the disks are still there with same status
"Transferring via API"
Alex
On Tue, Mar 20, 2018 at 11:49 AM, Eyal Shenitzky
wrote:
> Idan/Daniel,
>
> Can you please take a look?
>
> Thanks,
>
> On Tue, Mar 20, 2018 at 11:44 AM, Alex
After 48 hours it seems the issue has been resolved.
No disks are shown with status "Transferring via API"
Alex
On Wed, Mar 21, 2018 at 9:33 AM, Alex K wrote:
> Even after rebooting the engine the disks are still there with same status
> "Transferring via API"
>
&g
Hi,
Did you try to put it into maintenance then destroy it?
On Mar 22, 2018 19:18, "aduckers" wrote:
> I’ve got an environment with:
> 13 servers in the oVirt default cluster
> Hosted Engine 4.1.3.5-1.el7.centos
> Storage provided by FC san
>
> One of the FC LUNs, being used as a Data Domain, w
I would go with at least 4 HDDs per host in RAID 10. Then focus on network
performance where bottleneck usualy is for gluster.
On Sat, Mar 24, 2018, 00:44 Jayme wrote:
> Do you feel that SSDs are worth the extra cost or am I better off using
> regular HDDs? I'm looking for the best performanc
I have 2 or 3 node clusters with following hardware (all with self-hosted
engine) :
2 node cluster:
RAM: 64 GB per host
CPU: 8 cores per host
Storage: 4x 1TB SAS in RAID10
NIC: 2x Gbit
VMs: 20
The above, although I would like to have had a third NIC for gluster
storage redundancy, it is running s
Hi folks,
I am facing frequently the following issue:
On some large VMs (Windows 2016 with two disk drives, 60GB and 500GB) when
attempting to create a snapshot of the VM, the VM becomes unresponsive.
The errors that I managed to collect were:
vdsm error at host hosting the VM:
2018-03-25 14:40
Hi Peter,
This is interesting. Is it going to be a template with an external python
script?
Alex
On Mon, Mar 26, 2018, 08:50 Peter Hudec wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA256
>
> Hi Terry,
>
> I started to work on ZABBIX integration based on oVirt API.
> Basically it shoul
Hi Luca,
You have 2 node cluster with 512 GB each host to run engine only?
How many vms are u running at the compute nodes?
Alex
On Mon, Mar 26, 2018, 10:02 Luca 'remix_tj' Lorenzetto <
lorenzetto.l...@gmail.com> wrote:
> On Sat, Mar 24, 2018 at 9:33 AM, Andy Michielsen
> wrote:
> > Hi all,
>
.
Alex
On Sun, Mar 25, 2018 at 7:30 PM, Alex K wrote:
> Hi folks,
>
> I am facing frequently the following issue:
>
> On some large VMs (Windows 2016 with two disk drives, 60GB and 500GB) when
> attempting to create a snapshot of the VM, the VM becomes unresponsive.
>
> The
Any idea with this issue?
I am still trying to understand what may be causing this issue.
Many thanx for any assistance.
Alex
On Wed, Mar 28, 2018 at 10:06 AM, Yedidyah Bar David
wrote:
> On Tue, Mar 27, 2018 at 3:38 PM, Sandro Bonazzola
> wrote:
>
>>
>>
>> 2018-0
erstand why libvirt is logging timeout.
Alex
On Thu, Mar 29, 2018 at 9:42 PM, Alex K wrote:
> Any idea with this issue?
> I am still trying to understand what may be causing this issue.
>
> Many thanx for any assistance.
>
> Alex
>
> On Wed, Mar 28, 2018 at 10:06 AM, Yedid
Hi,
you need a second host so as power management to work.
Since you verified it with command line then adding a second host should
resolve this issue.
In regards to the interface, you need to remove the bridge interface as
instructed (make it a simple interface) then leave ovirt to configure it
Hi All,
Would appreciate for any ideas what to check further on the issue.
Alex
On Sun, Apr 1, 2018 at 9:04 PM, Alex K wrote:
> Checking further the logs I see this error given from libvirt of the host
> that has the guest VM running:
>
> Apr 1 17:53:41 v0 libvirtd: 2018-04-01
In case you need HA for the engine you need to deploy it to other hosts
also through the GUI.
On Tue, Apr 3, 2018 at 4:47 PM, FERNANDO FREDIANI wrote:
> Is it enough to deploy the Self-Hosted engine in just one Host of the
> cluster or is it necessary to repeat the process in each of the nodes
Hi,
You should be ok with the setup.
I am running around 20 vms (linux and windows, small and medium size) with
the half of your specs. With 10G network replica 3 is ok.
Alex
On Wed, Apr 4, 2018, 16:13 Jayme wrote:
> I'm spec'ing hardware for a 3-node oVirt build (on somewhat of a budget).
> I
Are you a troll?
On Sun, Apr 8, 2018, 12:15 wrote:
>
> Hi, I hava two node, and deploy hosted-engine by #hosted-engine --deploy,
> I find two hosted-engine that i deploied is independent, how to make my
> hosted-engine is HA?
>
> - 原始邮件 -
> 发件人：Alex K
> 收件人：
er file
>>> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20180408214554.conf'
>>> [ INFO ] Stage: Pre-termination
>>> [ INFO ] Stage: Termination
>>> [ ERROR ] Hosted Engine deployment failed
>>> Log file is located at
>>
Thanx Yaniv,
I will try to follow your advice.
Alex
On Tue, Apr 3, 2018 at 8:54 PM, Yaniv Kaul wrote:
>
>
> On Sun, Apr 1, 2018 at 9:04 PM, Alex K wrote:
>
>> Checking further the logs I see this error given from libvirt of the host
>> that has the guest VM running:
to be a race issue with libvirtd.
Alex
On Wed, Apr 11, 2018 at 6:57 PM, Alex K wrote:
> Thanx Yaniv,
>
> I will try to follow your advice.
>
> Alex
>
> On Tue, Apr 3, 2018 at 8:54 PM, Yaniv Kaul wrote:
>
>>
>>
>> On Sun, Apr 1, 2018 at 9:04 PM, Alex
Hi Sebastian,
In case you would like to use SSH you need to setup SSH keys for vdsm user
of at least one of the ovirt hosts in order to SSH from it to the remote
KVM host (lets name it kvmhost) as below:
1. Edit temporarily the /etc/passwd of one host of your ovirt cluster. (say
node0 for example
Hi all!
I wanted to check from your experience what would be the best approach to
change the IP addresses of the engine and hosts on the management network.
I have a 3 node cluster (in production) on ovirt 4.1 with engine and hosts
resolving through /etc/hosts files on hosts and engine. The hosts
Indeed the behaviour has not changed.
When adding users at 4.1 with ovirt-aaa-jdbc-tool i still need to add them
through gui for users to be listed in gui.
Alex
On Sun, May 6, 2018, 12:58 Martin Perina wrote:
>
>
> On Fri, 4 May 2018, 15:59 Matthias Leopold, <
> matthias.leop...@meduniwien.ac.
Hi all,
I have the following issue with repo of 4.1 version:
I am doing:
yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release41.rpm
yum update
then I get:
http://mirror.centos.org/centos/7/storage/x86_64/gluster-3.8/repodata/repomd.xml:
[Errno 14] HTTP Error 404 - Not Found
Trying
I am also experiencing random issues with this mailing list, even before
the upgrade. Some replies I never receive them ( I know this because a
friend of mine relays the emails I dont get...). I tried to unsubscribe and
subscribe but I still face this issue.
Alex
On Sun, May 13, 2018, 13:04 Jayme
Hi all,
I am trying to setup ovirt 4.2 self hosted with 3 nodes.
I have done several 4.1 installations without issues. Now at 4.2 I get:
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Unable
to resolve address\n"}
[ ERROR ] Failed to execute stage 'Closing up': Failed execut
hostsv4 v0.mydomain | grep v0.mydomain" on that machine?
>
> 2018-05-14 13:24:59,631-0400 DEBUG
> otopi.ovirt_hosted_engine_setup.ansible_utils
> ansible_utils._process_output:94 hostname_resolution_output:
> {'stderr_lines': [], u'changed': True, u'end
I overcame this with:
run at host:
/usr/sbin/ovirt-hosted-engine-cleanup
Redeployed then engine
engine-setup
This time was ok.
Thanx,
Alex
On Tue, May 15, 2018 at 10:51 AM, Alex K wrote:
> Hi,
>
> Thanx for the feedback.
>
> *getent ahostsv4 v0.mydomain*
>
> gi
wrote:
> Alex,
>
> I'm glad to hear you were able to get everything running! Please let us
> know if you have any issues going forward.
>
> Best regards,
>
> -Phillip Bailey
>
> On Tue, May 15, 2018 at 4:59 AM, Alex K wrote:
>
>> I overcame this with:
>
output?
>
> Thanks!
>
> -Phillip Bailey
>
> On Tue, May 15, 2018 at 9:22 AM, Alex K wrote:
>
>> Hi Philip,
>>
>> I finally was not able to complete it.
>> The ovirt ha agent at host was not starting for some reason.
>> It could be because I ran a
You could try at cluster -> console, to overwrite the default with your
public.
Alex
On Wed, May 23, 2018, 03:06 Aziz wrote:
> Hi all,
>
> I am able to access my VMs from LAN using remote Viewer, however this is
> not working from outside LAN, my setup is as follow:
>
> 1. Controller in a separ
I would check disks status and accessibility of mount points where your
gluster volumes reside.
On Tue, May 29, 2018, 22:28 Jim Kusznir wrote:
> On one ovirt server, I'm now seeing these messages:
> [56474.239725] blk_update_request: 63 callbacks suppressed
> [56474.239732] blk_update_request: I
1 - 100 of 252 matches
Mail list logo
