[ovirt-users] Re: renew certificates
Maybe you don't use ovirt-ovn. Also, we don't use it either. You can check these certs too: /etc/pki/ovirt-engine/certs/ovn-ndb.cer /etc/pki/ovirt-engine/certs/ovn-sdb.cer Tibor -Eredeti üzenet- Feladó: carl Címzett: Demeter Másolat: Darrell ; users Dátum: 2023. március 10., péntek 14:46 CET Tantárgy: Re: [ovirt-users] Re: renew certificates Yes: ticket was good till Dec 23 2022 and last system boot 2022-12-31 Regards Carl On Fri, Mar 10, 2023 at 8:39 AM Demeter Tibor wrote: Dear Carl, I don't know but I don't wanna try what will happen if it sets to expire... Have you restart the ovirt-engine since that is expired? Thanks Tibor Feladó: carl Címzett: Demeter Másolat: Darrell ; users Dátum: 2023. március 10., péntek 14:32 CET Tantárgy: Re: [ovirt-users] Re: renew certificates Hi Tibor, You are right. This certificate expired last December and was not renewed. Why am I not seeing any issue? Regards Carl On Fri, Mar 10, 2023 at 8:16 AM Demeter Tibor wrote: Dear Carl, Yes, I did exactly same with our 4.3 system at last summer. But it didn't renew all of certificates. You can check it with this command: openssl x509 -in /etc/pki/ovirt-engine/certs/ovirt-provider-ovn.cer -noout -dates Thank you. Regards Tibor Feladó: carl Címzett: Demeter Másolat: Darrell ; users Dátum: 2023. március 10., péntek 12:48 CET Tantárgy: Re: [ovirt-users] Re: renew certificates Hi, I remember having certificats expired back in décembre. I am still on 4.3 and engine-setup did renew the certificat. So not sure why it is not doing it on your side. Regards Carl Le ven. 10 mars 2023, 04 h 04, Demeter Tibor a écrit : Dear Darell, Thank you for your reply. That solution is not working on 4.3, because engine-setup does not renew these certs. It was a bug and it was resolved in 4.5.2. Any other suggestion? Thanks Regards Tibor Feladó: Darrell Címzett: Demeter Másolat: users Dátum: 2023. március 9., csütörtök 17:44 CET Tantárgy: Re: [ovirt-users] renew certificates Run engine-setup on your engine, it should ask to renew the cert and CA for you. -Darrell On Mar 9, 2023, at 6:19 AM, Demeter Tibor wrote: Dear listmembers, We have an ovirt 4.3 hyperconverged system and couple certificates will expire in next month. /etc/pki/ovirt-engine/certs/ovirt-provider-ovn Apr 11 08:16:33 2023 GMT /etc/pki/ovirt-engine/certs/ovn-ndb.cer Apr 11 08:16:32 2023 GMT /etc/pki/ovirt-engine/certs/ovn-sdb.cer Apr 11 08:16:32 2023 GMT How can I renew these certficates? Thanks in advance, Regards Tibor___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/VH7LJ3UXPKY6MUPPNPAW5HBBP5OKMCXX/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3JIJ2P5SUNQAF7XIOOD4PVH7PDW3Q777/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OTJTQRL6NN24TIIZNGCF7XEK6FG4POTG/
[ovirt-users] Re: renew certificates
Dear Carl, I don't know but I don't wanna try what will happen if it sets to expire... Have you restart the ovirt-engine since that is expired? Thanks Tibor -Eredeti üzenet- Feladó: carl Címzett: Demeter Másolat: Darrell ; users Dátum: 2023. március 10., péntek 14:32 CET Tantárgy: Re: [ovirt-users] Re: renew certificates Hi Tibor, You are right. This certificate expired last December and was not renewed. Why am I not seeing any issue? Regards Carl On Fri, Mar 10, 2023 at 8:16 AM Demeter Tibor wrote: Dear Carl, Yes, I did exactly same with our 4.3 system at last summer. But it didn't renew all of certificates. You can check it with this command: openssl x509 -in /etc/pki/ovirt-engine/certs/ovirt-provider-ovn.cer -noout -dates Thank you. Regards Tibor Feladó: carl Címzett: Demeter Másolat: Darrell ; users Dátum: 2023. március 10., péntek 12:48 CET Tantárgy: Re: [ovirt-users] Re: renew certificates Hi, I remember having certificats expired back in décembre. I am still on 4.3 and engine-setup did renew the certificat. So not sure why it is not doing it on your side. Regards Carl Le ven. 10 mars 2023, 04 h 04, Demeter Tibor a écrit : Dear Darell, Thank you for your reply. That solution is not working on 4.3, because engine-setup does not renew these certs. It was a bug and it was resolved in 4.5.2. Any other suggestion? Thanks Regards Tibor Feladó: Darrell Címzett: Demeter Másolat: users Dátum: 2023. március 9., csütörtök 17:44 CET Tantárgy: Re: [ovirt-users] renew certificates Run engine-setup on your engine, it should ask to renew the cert and CA for you. -Darrell On Mar 9, 2023, at 6:19 AM, Demeter Tibor wrote: Dear listmembers, We have an ovirt 4.3 hyperconverged system and couple certificates will expire in next month. /etc/pki/ovirt-engine/certs/ovirt-provider-ovn Apr 11 08:16:33 2023 GMT /etc/pki/ovirt-engine/certs/ovn-ndb.cer Apr 11 08:16:32 2023 GMT /etc/pki/ovirt-engine/certs/ovn-sdb.cer Apr 11 08:16:32 2023 GMT How can I renew these certficates? Thanks in advance, Regards Tibor___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/VH7LJ3UXPKY6MUPPNPAW5HBBP5OKMCXX/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3JIJ2P5SUNQAF7XIOOD4PVH7PDW3Q777/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/FUOOHNCP3R66FUUUCDSJYL6OQXQFFOI5/
[ovirt-users] Re: renew certificates
Dear Carl, Yes, I did exactly same with our 4.3 system at last summer. But it didn't renew all of certificates. You can check it with this command: openssl x509 -in /etc/pki/ovirt-engine/certs/ovirt-provider-ovn.cer -noout -dates Thank you. Regards Tibor -Eredeti üzenet- Feladó: carl Címzett: Demeter Másolat: Darrell ; users Dátum: 2023. március 10., péntek 12:48 CET Tantárgy: Re: [ovirt-users] Re: renew certificates Hi, I remember having certificats expired back in décembre. I am still on 4.3 and engine-setup did renew the certificat. So not sure why it is not doing it on your side. Regards Carl Le ven. 10 mars 2023, 04 h 04, Demeter Tibor a écrit : Dear Darell, Thank you for your reply. That solution is not working on 4.3, because engine-setup does not renew these certs. It was a bug and it was resolved in 4.5.2. Any other suggestion? Thanks Regards Tibor Feladó: Darrell Címzett: Demeter Másolat: users Dátum: 2023. március 9., csütörtök 17:44 CET Tantárgy: Re: [ovirt-users] renew certificates Run engine-setup on your engine, it should ask to renew the cert and CA for you. -Darrell On Mar 9, 2023, at 6:19 AM, Demeter Tibor wrote: Dear listmembers, We have an ovirt 4.3 hyperconverged system and couple certificates will expire in next month. /etc/pki/ovirt-engine/certs/ovirt-provider-ovn Apr 11 08:16:33 2023 GMT /etc/pki/ovirt-engine/certs/ovn-ndb.cer Apr 11 08:16:32 2023 GMT /etc/pki/ovirt-engine/certs/ovn-sdb.cer Apr 11 08:16:32 2023 GMT How can I renew these certficates? Thanks in advance, Regards Tibor___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/VH7LJ3UXPKY6MUPPNPAW5HBBP5OKMCXX/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3JIJ2P5SUNQAF7XIOOD4PVH7PDW3Q777/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AH7UZ5YCWK25UTEMP7QEP4BXNTGXNMRC/
[ovirt-users] Re: renew certificates
Dear Darell, Thank you for your reply. That solution is not working on 4.3, because engine-setup does not renew these certs. It was a bug and it was resolved in 4.5.2. Any other suggestion? Thanks Regards Tibor -Eredeti üzenet- Feladó: Darrell Címzett: Demeter Másolat: users Dátum: 2023. március 9., csütörtök 17:44 CET Tantárgy: Re: [ovirt-users] renew certificates Run engine-setup on your engine, it should ask to renew the cert and CA for you. -Darrell On Mar 9, 2023, at 6:19 AM, Demeter Tibor wrote: Dear listmembers, We have an ovirt 4.3 hyperconverged system and couple certificates will expire in next month. /etc/pki/ovirt-engine/certs/ovirt-provider-ovn Apr 11 08:16:33 2023 GMT /etc/pki/ovirt-engine/certs/ovn-ndb.cer Apr 11 08:16:32 2023 GMT /etc/pki/ovirt-engine/certs/ovn-sdb.cer Apr 11 08:16:32 2023 GMT How can I renew these certficates? Thanks in advance, Regards Tibor ___Users mailing list -- users@ovirt.orgTo unsubscribe send an email to users-leave@ovirt.orgPrivacy Statement: https://www.ovirt.org/privacy-policy.htmloVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/VH7LJ3UXPKY6MUPPNPAW5HBBP5OKMCXX/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3JIJ2P5SUNQAF7XIOOD4PVH7PDW3Q777/
[ovirt-users] renew certificates
Dear listmembers, We have an ovirt 4.3 hyperconverged system and couple certificates will expire in next month. /etc/pki/ovirt-engine/certs/ovirt-provider-ovn Apr 11 08:16:33 2023 GMT /etc/pki/ovirt-engine/certs/ovn-ndb.cer Apr 11 08:16:32 2023 GMT /etc/pki/ovirt-engine/certs/ovn-sdb.cer Apr 11 08:16:32 2023 GMT How can I renew these certficates? Thanks in advance, Regards Tibor ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/VH7LJ3UXPKY6MUPPNPAW5HBBP5OKMCXX/
[ovirt-users] Import machines
Dear Listmembers, Is it possible to import ovirt 4.3's VMs into a new ovirt environment via our old storage domains? I have an old 4.3 self-hosted system with 3 storage domain, but it seems very difficult upgrade until 4.5. I just wondering, what if I do install a complety new system and just attach the old storge domains to that. Is it will work ? If yes, what will do it with our VM-s and networks. Thanks in advance, Regards. Tibor ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3EFH2SRTMGM3SY7RDLTUY35TKE6V7T55/
[ovirt-users] Re: Replace storage behind ovirt engine
Dear Didi, Thank you for your reply. My glusterfs uses the host's internal disks. I have 4 hosts, but the glusterfs use only 3. It is a centos7 based system. As I think, I have to elminate the glusterfs first, because I can't upgrade the hosts until the engine running on there. That's why I think the engine will access to them after the reinstall. Is it fine? What pitfalls can I except in this case? Thanks in advance, Tibor -Eredeti üzenet- Feladó: Yedidyah Címzett: Demeter Másolat: users Dátum: 2022. március 16., szerda 15:08 CET Tantárgy: Re: [ovirt-users] Replace storage behind ovirt engine On Wed, Mar 16, 2022 at 1:39 PM Demeter Tibor wrote: > > Dear Users, > > I have to upgrade our hyperconverged ovirt system from 4.3 to 4.4, but > meanwhile I would like to change the storage backend under the engine. At > this moment it is a gluster based clustered fs, but I don't really like > it I would like to change to a hardver based iscsi storage. > I just wondering, when I do the engine reinstall, I will install it to an > other storage. > Is it possible somehow? The "canonical" way is: 1. On current engine machine: engine-backup --file=f1 2. (Re)Install a new host (with 4.4?), copy there f1, and: hosted-engine --deploy --restore-from-file=f1 This only handles your engine VM, not others. The new engine (with its hosted_storage on the new iscsi storage) will need access to the existing gluster storage holding the other VMs, if you plan to somehow import/migrate/whatever them. If unsure how to continue, perhaps clarify your plan with more details. Good luck, -- Didi ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/NKBOPMSVIUOKWAQNS6X3LZE4AHA6YZRQ/
[ovirt-users] Replace storage behind ovirt engine
Dear Users, I have to upgrade our hyperconverged ovirt system from 4.3 to 4.4, but meanwhile I would like to change the storage backend under the engine. At this moment it is a gluster based clustered fs, but I don't really like it I would like to change to a hardver based iscsi storage. I just wondering, when I do the engine reinstall, I will install it to an other storage. Is it possible somehow? Thanks in advance. Tibor ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/LWFPIARG7JKIIZ6F2CRFEBHJ2P5LICP6/
[ovirt-users] Expiration date of certificates
Dear Listmembers, How can I exctract the expiration dates all certificates which ovirt are uses? Also, is there any command or tool in ovirt what I can use to create and deploy new certifications on hosted engine and hosts? Thanks in advance, Regards, Tibor ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/PIXPNSQAMHLFAPAHVSS4OMIX7DNCWWE4/
[ovirt-users] Re: Low disk space on Storage
Dear Users, I have exactly same problem. When I trying to migrate a big (16 TB) disk image to an another storage domain, i've got this error message: Error while executing action: Cannot move Virtual Disk. Low disk space on Storage Domain Backup. But I have a lot of space... Ovirt 4.3.7 Please help me what can I do? Regards, Tibor - 2019. nov.. 13., 11:11, írta: > The update fixes the issue. > Thanks > De: "Benny Zlotnik" > Para: supo...@logicworks.pt > Cc: "users" > Enviadas: Terça-feira, 12 De Novembro de 2019 11:48:47 > Assunto: Re: [ovirt-users] Low disk space on Storage > This was fixed in 4.3.6, I suggest upgrading > On Tue, Nov 12, 2019 at 12:45 PM wrote: > > Hi, > > I'm running ovirt Version:4.3.4.3-1.el7 > > My filesystem disk has 30 GB free space. > > Cannot start a VM due to an I/O error storage. > > When tryng to move the disk to another storage domain get this error: >> Error while executing action: Cannot move Virtual Disk. Low disk space on > > Storage Domain DATA4. > > The sum of pre-allocated disk is the total of the storage domain disk. > > Any idea what can I do to move a disk to other storage domain? > > Many thanks > > -- > > > > Jose Ferradeira > > http://www.logicworks.pt > > ___ > > Users mailing list -- users@ovirt.org > > To unsubscribe send an email to users-le...@ovirt.org > > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: > > https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/MQFPGUPB43I7OO7FXEPLG4XSG5X2INLJ/ > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/M4SDOU7S2IFIFZFPHOKRNCXFQ3C25AO2/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/PVVRGUMPMIEZKJYJVPEUP4WKAV72P6LD/
[ovirt-users] 4.2.8 to 4.3.7 > Management slow
Dear Users, I've successfully upgraded my 4 node hyperconverged system from 4.2.8 to 4.3.7. After upgrade everything seems to working fine, but the whole management system seems very slow. Spends many seconds when I clicking on "virtual machines" or I want to edit a virtual machines. The speed of vms and the IO is fine. It is running on a glusterfs (distributed replicate, on 3 node, 9 bricks). There are no errors, everything fine. but terrible slow:( The engine vm has 0.2-0.3 load. What can I do? Thanks in advance and I wish Happy New Year! Regards, Tibor ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/BW4XJBQHQHITK3KLOREXE6EHXO5PL6X6/
[ovirt-users] 4.2.7 to 4.3.5
Dear list members, I would like to upgrade my Centos 7.6 based ovirt 4.2 to 4.3.5. How is safe the upgrade ? How is stable the actual branch ? It seems to me, in 4.3.x there are a lot of cases caused by live migration, snapshot deletion, etc. Are these really existing problems? So, I'm a little bit afraid of the upgrade. It is a productive system, I don't want to make an outage. Thanks in advance, Regards, Tibor ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/LHNLHDGBBRHA6I4UOHIPH7H7B5LWQ2IL/
[ovirt-users] Upgrade 3.5 to 4.3
Hi All,
I did began a very big project, I've started upgrade a cluster from 3.5 to
4.3...
It was a mistake:(
Since upgrade, I can't start the host. The UI seems to working fine.
[root@virt ~]# service vdsm-network start
Redirecting to /bin/systemctl start vdsm-network.service
Job for vdsm-network.service failed because the control process exited with
error code. See "systemctl status vdsm-network.service" and "journalctl -xe"
for details.
[root@virt ~]# service vdsm-network status
Redirecting to /bin/systemctl status vdsm-network.service
● vdsm-network.service - Virtual Desktop Server Manager network restoration
Loaded: loaded (/usr/lib/systemd/system/vdsm-network.service; disabled; vendor
preset: enabled)
Active: failed (Result: exit-code) since Thu 2019-04-04 15:03:44 CEST; 6s ago
Process: 19325 ExecStart=/usr/bin/vdsm-tool restore-nets (code=exited,
status=1/FAILURE)
Process: 19313 ExecStartPre=/usr/bin/vdsm-tool --vvverbose --append
--logfile=/var/log/vdsm/upgrade.log upgrade-unified-persistence (code=exited,
status=0/SUCCESS)
Main PID: 19325 (code=exited, status=1/FAILURE)
Apr 04 15:03:44 virt.bolax.hu vdsm-tool[19325]: return
tool_command[cmd]["command"](*args)
Apr 04 15:03:44 virt.bolax.hu vdsm-tool[19325]: File
"/usr/lib/python2.7/site-packages/vdsm/tool/restore_nets.py", line 41, in
restore_command
Apr 04 15:03:44 virt.bolax.hu vdsm-tool[19325]: exec_restore(cmd)
Apr 04 15:03:44 virt.bolax.hu vdsm-tool[19325]: File
"/usr/lib/python2.7/site-packages/vdsm/tool/restore_nets.py", line 54, in
exec_restore
Apr 04 15:03:44 virt.bolax.hu vdsm-tool[19325]: raise EnvironmentError('Failed
to restore the persisted networks')
Apr 04 15:03:44 virt.bolax.hu vdsm-tool[19325]: EnvironmentError: Failed to
restore the persisted networks
Apr 04 15:03:44 virt.bolax.hu systemd[1]: vdsm-network.service: main process
exited, code=exited, status=1/FAILURE
Apr 04 15:03:44 virt.bolax.hu systemd[1]: Failed to start Virtual Desktop
Server Manager network restoration.
Apr 04 15:03:44 virt.bolax.hu systemd[1]: Unit vdsm-network.service entered
failed state.
Apr 04 15:03:44 virt.bolax.hu systemd[1]: vdsm-network.service failed.
Since, the host does not start.
Apr 04 14:56:00 virt.bolax.hu libvirtd[17705]: 2019-04-04 12:56:00.764+:
17705: error : virNetSocketReadWire:1806 : End of file while reading data:
Input/output error
Apr 04 14:56:00 virt.bolax.hu libvirtd[17705]: 2019-04-04 12:56:00.965+:
17709: error : virNetSASLSessionListMechanisms:393 : internal error: cannot
list SASL ...line 1757)
Apr 04 14:56:00 virt.bolax.hu libvirtd[17705]: 2019-04-04 12:56:00.966+:
17709: error : remoteDispatchAuthSaslInit:3440 : authentication failed:
authentication failed
Apr 04 14:56:00 virt.bolax.hu libvirtd[17705]: 2019-04-04 12:56:00.966+:
17705: error : virNetSocketReadWire:1806 : End of file while reading data:
Input/output error
Apr 04 14:56:01 virt.bolax.hu libvirtd[17705]: 2019-04-04 12:56:01.167+:
17710: error : virNetSASLSessionListMechanisms:393 : internal error: cannot
list SASL ...line 1757)
Apr 04 14:56:01 virt.bolax.hu libvirtd[17705]: 2019-04-04 12:56:01.167+:
17710: error : remoteDispatchAuthSaslInit:3440 : authentication failed:
authentication failed
[root@virt ~]# service vdsm-network status
Redirecting to /bin/systemctl status vdsm-network.service
● vdsm-network.service - Virtual Desktop Server Manager network restoration
Loaded: loaded (/usr/lib/systemd/system/vdsm-network.service; disabled; vendor
preset: enabled)
Active: failed (Result: exit-code) since Thu 2019-04-04 15:00:39 CEST; 2min 49s
ago
Process: 19079 ExecStart=/usr/bin/vdsm-tool restore-nets (code=exited,
status=1/FAILURE)
Process: 19045 ExecStartPre=/usr/bin/vdsm-tool --vvverbose --append
--logfile=/var/log/vdsm/upgrade.log upgrade-unified-persistence (code=exited,
status=0/SUCCESS)
Main PID: 19079 (code=exited, status=1/FAILURE)
Also, I upgraded to until 4.0 , but it seems to same. I cant reinstall, and
reactivate the host.
Originally it was an AIO installation.
Please help me solve this problem.
Thanks in advance,
R
Tibor
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/5U4R4R2YI7QUPVFDVWF6B3NMXWESBNRD/
[ovirt-users] Re: IP change of a storage domain
Hi, I would like to confirm, your suggestion was perfect as solution! Thank you for help, Regards, Tibor - 2018. dec.. 10., 13:42, Elad Ben Aharon írta: > Hi, > You can change the storage connection details (IP address, path/LUN, port, > etc.) > without removing the storage domain. > IIRC, the domain has to be in maintenance for that. > For file based storage, you can do it via the Webadmin and for block based > storage, via REST API. > See [ > https://ovirt.org/develop/release-management/features/storage/manage-storage-connections/ > | > https://ovirt.org/develop/release-management/features/storage/manage-storage-connections/ > ] > On Mon, Dec 10, 2018 at 2:16 PM Demeter Tibor < [ mailto:tdeme...@itsmart.hu | > tdeme...@itsmart.hu ] > wrote: >> Dear All, >> I have to change an IP address of one of my storage domains. >> How is safe that? There are a lot of disk what running from what and parts of >> some running VMs. >> I thought the whole procedure like this: >> - stop vms >> - remove storage domain from inventory >> - delete storage domain from inventory (is it needed?) >> - change IP >> - re-add storage domain as new to inventory >> - import disks from storage domain >> Need to re-add disks to VMs as new after the import? Or it will >> automatically? >> Is it will a new storage domain in the engine or will same as? >> - start vms >> Please check my todo list, where I'm was wrong. >> Thanks in advance, >> Regards, >> Tibor >> ___ >> Users mailing list -- [ mailto:users@ovirt.org | users@ovirt.org ] >> To unsubscribe send an email to [ mailto:users-le...@ovirt.org | >> users-le...@ovirt.org ] >> Privacy Statement: [ https://www.ovirt.org/site/privacy-policy/ | >> https://www.ovirt.org/site/privacy-policy/ ] >> oVirt Code of Conduct: [ >> https://www.ovirt.org/community/about/community-guidelines/ | >> https://www.ovirt.org/community/about/community-guidelines/ ] >> List Archives: [ >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/YI6NJXQSBM3WESMHHP2LXOBLCEKJ4P6B/ >> | >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/YI6NJXQSBM3WESMHHP2LXOBLCEKJ4P6B/ >> ] > -- > Elad Ben Aharon > ASSOCIATE MANAGER, RHV storage QE ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/74LTIANDHTCNDANPX6IJ46ZDOBK2CPMY/
[ovirt-users] IP change of a storage domain
Dear All, I have to change an IP address of one of my storage domains. How is safe that? There are a lot of disk what running from what and parts of some running VMs. I thought the whole procedure like this: - stop vms - remove storage domain from inventory - delete storage domain from inventory (is it needed?) - change IP - re-add storage domain as new to inventory - import disks from storage domain Need to re-add disks to VMs as new after the import? Or it will automatically? Is it will a new storage domain in the engine or will same as? - start vms Please check my todo list, where I'm was wrong. Thanks in advance, Regards, Tibor ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/YI6NJXQSBM3WESMHHP2LXOBLCEKJ4P6B/
[ovirt-users] Re: Strange migration issue
Dear Eitan, You misunderstood me, we use the LATEST version of ovirt, but this problem exist since we started to use (3.4). Have a nice day, Regards, Tibor - 2018. dec.. 9., 10:04, Eitan Raviv era...@redhat.com írta: > Hi Tibor, > > I don't know what would cause such issues as you describe, but since > you are using a very old version of oVirt, the best I can recommend is > to upgrade to 4.2. > > HTH > > On Thu, Dec 6, 2018 at 6:24 PM Demeter Tibor wrote: >> >> Dear All, >> >> I've using ovirt from 3.4 and we have a strange, rarely problem with live >> migrations. >> >> - In most of case impossible to do a live migrate of VMs that have a lot of >> memory (16 gigs and more up to 40 GB) . >> - Those are need to try and try until the migration will be successful >> - impossible to understand why does working in a case and doesn't in another >> - it is happening always if there bigger load on vms, but only on big memory >> VM-s >> - The small VMs (2-4-8 gigs) can migrate without problems >> - In very rarely cases possible to migrate on first try. >> - We using the memory ballooning function on all of VMs. >> >> We using dedicated migration network with separated vlans, but on same >> physical >> lan (1gbe) with ovirtmgmt. >> At this moment, we don't use QoS for dedicate bandwidth. >> >> What can I do ? >> >> Thanks in advance, >> Regards, >> >> Tibor >> >> ___ >> Users mailing list -- users@ovirt.org >> To unsubscribe send an email to users-le...@ovirt.org >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/ORTLVGYDPUJAIMTUL32WEQNSGNQPKFAG/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/3VIFCJ2CDQKH4XXWKJAOSRK7W2KYQYW7/
[ovirt-users] Re: 4.2.7 & centos 7.6 dependency problems
Dear Simon, It is working fine with a little bit modification. You need to use "exclude=nbdkit-*" instead of "exclude=nbdkit*" . Thanks for your mention, Regards, Tibor - 2018. dec.. 6., 22:37, Simon Coter írta: > Hi Tibor, > the update is trying to install: > nbdkit(x86-64) = 1.2.7-2.el7 > while you only have: > nbdkit(x86-64) = 1.2.6-1.el7_6.2 > 1.2.7 release is available on ovirt-4.2-epel repository while 1.2.6 is part of > CentOS “Base” and “Updates”. > The problem is that "nbdkit-plugin-vddk” has only 1.2.6 release and this > depends > on “ndbkit”. > Possible workaround that should work: > Edit the .repo containing “ovirt-4.2-epel” and add the following line > to > the “ovirt-4.2-epel” entry: > exclude=ndbkit* > then, rerun the update. > Simon >> On Dec 6, 2018, at 10:27 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu | >> tdeme...@itsmart.hu ] > wrote: >> Dear Roberto, >> Thank you for your reply. >> I would like to upgrade the node os (not just ovirt) to latest (7.6) version. >> Thanks >> Regards, >> Tibor >> - 2018. dec.. 6., 21:39, Roberto Nunin < [ mailto:robnu...@gmail.com | >> robnu...@gmail.com ] > írta: >>> Hi >>> I had a similar problem just yesterday. >>> I've disabled all three sources within CentOS-Base.repo. >>> My nodes are still 7.5, but hope that this can help anyway. >>> My update process, done from hested-engine gui, has completed after the >>> change. >>> BR >>> Il giorno gio 6 dic 2018 alle 20:19 Demeter Tibor < [ >>> mailto:tdeme...@itsmart.hu >>> | tdeme...@itsmart.hu ] > ha scritto: >>>> Dear All, >>>> I would like to upgrade my ovirt 4.2.5 to 4.2.7. >>>> The hosted engine upgrade was success, but on the nodes i've got an >>>> dependency >>>> error: >>>> ---> Package mesa-libgbm.x86_64 0:18.0.5-3.el7 will be installed >>>> --> Processing Dependency: mesa-libglapi = 18.0.5-3.el7 for package: >>>> mesa-libgbm-18.0.5-3.el7.x86_64 >>>> --> Processing Dependency: libwayland-server.so.0()(64bit) for package: >>>> mesa-libgbm-18.0.5-3.el7.x86_64 >>>> ---> Package nbdkit.x86_64 0:1.2.7-2.el7 will be installed >>>> ---> Package nbdkit-plugin-python2.x86_64 0:1.2.7-2.el7 will be installed >>>> --> Processing Dependency: nbdkit-plugin-python-common = 1.2.7-2.el7 for >>>> package: nbdkit-plugin-python2-1.2.7-2.el7.x86_64 >>>> ---> Package nbdkit-plugin-vddk.x86_64 0:1.2.6-1.el7_6.2 will be installed >>>> --> Processing Dependency: nbdkit(x86-64) = 1.2.6-1.el7_6.2 for package: >>>> nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 >>>> ---> Package python2-blockdev.x86_64 0:2.18-3.el7 will be installed >>>> ---> Package python2-futures.noarch 0:3.1.1-5.el7 will be installed >>>> --> Running transaction check >>>> ---> Package libwayland-server.x86_64 0:1.15.0-1.el7 will be installed >>>> ---> Package mesa-libglapi.x86_64 0:18.0.5-3.el7 will be installed >>>> ---> Package nbdkit-plugin-python-common.x86_64 0:1.2.7-2.el7 will be >>>> installed >>>> ---> Package nbdkit-plugin-vddk.x86_64 0:1.2.6-1.el7_6.2 will be installed >>>> --> Processing Dependency: nbdkit(x86-64) = 1.2.6-1.el7_6.2 for package: >>>> nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 >>>> --> Finished Dependency Resolution >>>> --> Running transaction check >>>> ---> Package kernel.x86_64 0:3.10.0-693.11.6.el7 will be erased >>>> ---> Package nbdkit-plugin-vddk.x86_64 0:1.2.6-1.el7_6.2 will be installed >>>> --> Processing Dependency: nbdkit(x86-64) = 1.2.6-1.el7_6.2 for package: >>>> nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 >>>> --> Finished Dependency Resolution >>>> Error: Package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 (updates) >>>> Requires: nbdkit(x86-64) = 1.2.6-1.el7_6.2 >>>> Available: nbdkit-1.2.6-1.el7.x86_64 (base) >>>> nbdkit(x86-64) = 1.2.6-1.el7 >>>> Available: nbdkit-1.2.6-1.el7_6.2.x86_64 (updates) >>>> nbdkit(x86-64) = 1.2.6-1.el7_6.2 >>>> Installing: nbdkit-1.2.7-2.el7.x86_64 (ovirt-4.2-epel) >>>> nbdkit(x86-64) = 1.2.7-2.el7 >>>> You could try using --skip-broken to work around the problem >>>> You could try running: rpm -Va --nofiles --nodigest >>>> How can I solve this? >>>> Thanks in advance, >>>
[ovirt-users] Re: 4.2.7 & centos 7.6 dependency problems
Dear Roberto, Thank you for your reply. I would like to upgrade the node os (not just ovirt) to latest (7.6) version. Thanks Regards, Tibor - 2018. dec.. 6., 21:39, Roberto Nunin írta: > Hi > I had a similar problem just yesterday. > I've disabled all three sources within CentOS-Base.repo. > My nodes are still 7.5, but hope that this can help anyway. > My update process, done from hested-engine gui, has completed after the > change. > BR > Il giorno gio 6 dic 2018 alle 20:19 Demeter Tibor < [ > mailto:tdeme...@itsmart.hu > | tdeme...@itsmart.hu ] > ha scritto: >> Dear All, >> I would like to upgrade my ovirt 4.2.5 to 4.2.7. >> The hosted engine upgrade was success, but on the nodes i've got an >> dependency >> error: >> ---> Package mesa-libgbm.x86_64 0:18.0.5-3.el7 will be installed >> --> Processing Dependency: mesa-libglapi = 18.0.5-3.el7 for package: >> mesa-libgbm-18.0.5-3.el7.x86_64 >> --> Processing Dependency: libwayland-server.so.0()(64bit) for package: >> mesa-libgbm-18.0.5-3.el7.x86_64 >> ---> Package nbdkit.x86_64 0:1.2.7-2.el7 will be installed >> ---> Package nbdkit-plugin-python2.x86_64 0:1.2.7-2.el7 will be installed >> --> Processing Dependency: nbdkit-plugin-python-common = 1.2.7-2.el7 for >> package: nbdkit-plugin-python2-1.2.7-2.el7.x86_64 >> ---> Package nbdkit-plugin-vddk.x86_64 0:1.2.6-1.el7_6.2 will be installed >> --> Processing Dependency: nbdkit(x86-64) = 1.2.6-1.el7_6.2 for package: >> nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 >> ---> Package python2-blockdev.x86_64 0:2.18-3.el7 will be installed >> ---> Package python2-futures.noarch 0:3.1.1-5.el7 will be installed >> --> Running transaction check >> ---> Package libwayland-server.x86_64 0:1.15.0-1.el7 will be installed >> ---> Package mesa-libglapi.x86_64 0:18.0.5-3.el7 will be installed >> ---> Package nbdkit-plugin-python-common.x86_64 0:1.2.7-2.el7 will be >> installed >> ---> Package nbdkit-plugin-vddk.x86_64 0:1.2.6-1.el7_6.2 will be installed >> --> Processing Dependency: nbdkit(x86-64) = 1.2.6-1.el7_6.2 for package: >> nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 >> --> Finished Dependency Resolution >> --> Running transaction check >> ---> Package kernel.x86_64 0:3.10.0-693.11.6.el7 will be erased >> ---> Package nbdkit-plugin-vddk.x86_64 0:1.2.6-1.el7_6.2 will be installed >> --> Processing Dependency: nbdkit(x86-64) = 1.2.6-1.el7_6.2 for package: >> nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 >> --> Finished Dependency Resolution >> Error: Package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 (updates) >> Requires: nbdkit(x86-64) = 1.2.6-1.el7_6.2 >> Available: nbdkit-1.2.6-1.el7.x86_64 (base) >> nbdkit(x86-64) = 1.2.6-1.el7 >> Available: nbdkit-1.2.6-1.el7_6.2.x86_64 (updates) >> nbdkit(x86-64) = 1.2.6-1.el7_6.2 >> Installing: nbdkit-1.2.7-2.el7.x86_64 (ovirt-4.2-epel) >> nbdkit(x86-64) = 1.2.7-2.el7 >> You could try using --skip-broken to work around the problem >> You could try running: rpm -Va --nofiles --nodigest >> How can I solve this? >> Thanks in advance, >> Regards, >> Tibor >> ___ >> Users mailing list -- [ mailto:users@ovirt.org | users@ovirt.org ] >> To unsubscribe send an email to [ mailto:users-le...@ovirt.org | >> users-le...@ovirt.org ] >> Privacy Statement: [ https://www.ovirt.org/site/privacy-policy/ | >> https://www.ovirt.org/site/privacy-policy/ ] >> oVirt Code of Conduct: [ >> https://www.ovirt.org/community/about/community-guidelines/ | >> https://www.ovirt.org/community/about/community-guidelines/ ] >> List Archives: [ >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/AUAO3LNG2LY56K37ARWH6ORSC6MZL5CA/ >> | >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/AUAO3LNG2LY56K37ARWH6ORSC6MZL5CA/ >> ] > -- > Roberto Nunin ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/BH6UKVHFNACOQV7Y7YWCV2YP54SUQJJQ/
[ovirt-users] 4.2.7 & centos 7.6 dependency problems
Dear All, I would like to upgrade my ovirt 4.2.5 to 4.2.7. The hosted engine upgrade was success, but on the nodes i've got an dependency error: ---> Package mesa-libgbm.x86_64 0:18.0.5-3.el7 will be installed --> Processing Dependency: mesa-libglapi = 18.0.5-3.el7 for package: mesa-libgbm-18.0.5-3.el7.x86_64 --> Processing Dependency: libwayland-server.so.0()(64bit) for package: mesa-libgbm-18.0.5-3.el7.x86_64 ---> Package nbdkit.x86_64 0:1.2.7-2.el7 will be installed ---> Package nbdkit-plugin-python2.x86_64 0:1.2.7-2.el7 will be installed --> Processing Dependency: nbdkit-plugin-python-common = 1.2.7-2.el7 for package: nbdkit-plugin-python2-1.2.7-2.el7.x86_64 ---> Package nbdkit-plugin-vddk.x86_64 0:1.2.6-1.el7_6.2 will be installed --> Processing Dependency: nbdkit(x86-64) = 1.2.6-1.el7_6.2 for package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 ---> Package python2-blockdev.x86_64 0:2.18-3.el7 will be installed ---> Package python2-futures.noarch 0:3.1.1-5.el7 will be installed --> Running transaction check ---> Package libwayland-server.x86_64 0:1.15.0-1.el7 will be installed ---> Package mesa-libglapi.x86_64 0:18.0.5-3.el7 will be installed ---> Package nbdkit-plugin-python-common.x86_64 0:1.2.7-2.el7 will be installed ---> Package nbdkit-plugin-vddk.x86_64 0:1.2.6-1.el7_6.2 will be installed --> Processing Dependency: nbdkit(x86-64) = 1.2.6-1.el7_6.2 for package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 --> Finished Dependency Resolution --> Running transaction check ---> Package kernel.x86_64 0:3.10.0-693.11.6.el7 will be erased ---> Package nbdkit-plugin-vddk.x86_64 0:1.2.6-1.el7_6.2 will be installed --> Processing Dependency: nbdkit(x86-64) = 1.2.6-1.el7_6.2 for package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 --> Finished Dependency Resolution Error: Package: nbdkit-plugin-vddk-1.2.6-1.el7_6.2.x86_64 (updates) Requires: nbdkit(x86-64) = 1.2.6-1.el7_6.2 Available: nbdkit-1.2.6-1.el7.x86_64 (base) nbdkit(x86-64) = 1.2.6-1.el7 Available: nbdkit-1.2.6-1.el7_6.2.x86_64 (updates) nbdkit(x86-64) = 1.2.6-1.el7_6.2 Installing: nbdkit-1.2.7-2.el7.x86_64 (ovirt-4.2-epel) nbdkit(x86-64) = 1.2.7-2.el7 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest How can I solve this? Thanks in advance, Regards, Tibor ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/AUAO3LNG2LY56K37ARWH6ORSC6MZL5CA/
[ovirt-users] Strange migration issue
Dear All, I've using ovirt from 3.4 and we have a strange, rarely problem with live migrations. - In most of case impossible to do a live migrate of VMs that have a lot of memory (16 gigs and more up to 40 GB) . - Those are need to try and try until the migration will be successful - impossible to understand why does working in a case and doesn't in another - it is happening always if there bigger load on vms, but only on big memory VM-s - The small VMs (2-4-8 gigs) can migrate without problems - In very rarely cases possible to migrate on first try. - We using the memory ballooning function on all of VMs. We using dedicated migration network with separated vlans, but on same physical lan (1gbe) with ovirtmgmt. At this moment, we don't use QoS for dedicate bandwidth. What can I do ? Thanks in advance, Regards, Tibor ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ORTLVGYDPUJAIMTUL32WEQNSGNQPKFAG/
[ovirt-users] Re: Centos7.6
Ok, thank you for all! Regards, Tibor - 2018. dec.. 6., 11:06, Sandro Bonazzola írta: > Il giorno gio 6 dic 2018 alle ore 10:39 Demeter Tibor < [ > mailto:tdeme...@itsmart.hu | tdeme...@itsmart.hu ] > ha scritto: >> Dear All, >> I just wondering I would like to make an upgrade from 4.2.5 to latest stable >> release of ovirt. >> Meanwhile centos7.6 was released. >> Will that compatible with the current release of ovirt? >> How is safe an upgrade now? > oVirt 4.2.7 is already compatible with CentOS 7.6. > I think that right now it's the best time to upgrade both oVirt and CentOS. >> Thanks in advance, >> Regards, >> Tibor >> ___ >> Users mailing list -- [ mailto:users@ovirt.org | users@ovirt.org ] >> To unsubscribe send an email to [ mailto:users-le...@ovirt.org | >> users-le...@ovirt.org ] >> Privacy Statement: [ https://www.ovirt.org/site/privacy-policy/ | >> https://www.ovirt.org/site/privacy-policy/ ] >> oVirt Code of Conduct: [ >> https://www.ovirt.org/community/about/community-guidelines/ | >> https://www.ovirt.org/community/about/community-guidelines/ ] >> List Archives: [ >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/5KMICT3FR4CHD4DEW5JLCRXMQVG77JWY/ >> | >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/5KMICT3FR4CHD4DEW5JLCRXMQVG77JWY/ >> ] > -- > SANDRO BONAZZOLA > MANAGER, SOFTWARE ENGINEERING, EMEA R RHV > [ https://www.redhat.com/ | Red Hat EMEA ] > [ mailto:sbona...@redhat.com | sbona...@redhat.com ] [ https://red.ht/sig ] ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2ZMM6QGOLK2JAXKJPIVHRCK6KE774TXW/
[ovirt-users] Centos7.6
Dear All, I just wondering I would like to make an upgrade from 4.2.5 to latest stable release of ovirt. Meanwhile centos7.6 was released. Will that compatible with the current release of ovirt? How is safe an upgrade now? Thanks in advance, Regards, Tibor ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5KMICT3FR4CHD4DEW5JLCRXMQVG77JWY/
[ovirt-users] Switch from nightly to stable
Dear users, Around ovirt 4.2.2 after a bug I had switch to nightly from stable. Its was do applied only on the engine, not compute nodes. But now I would like to switch back to stable branch. How is safe that? I just need do remove the nightly repo and update? Need to apply a yum update * before or not? Please describe me what is the safe procedure. Thanks in advance, Regards, Tibor ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2RPQRP4VRXOVLCPZIVBSBZ6KIOHNKAO2/
[ovirt-users] Re: Gluster quorum
Dear Jim, Thank you for your help, now it's working again!!! :) Have a nice day! Regards, Tibor - 2018. máj.. 29., 23:57, Jim Kusznir írta: > I had the same problem when I upgraded to 4.2. I found that if I went to the > brick in the UI and selected it, there was a "start" button in the upper-right > of the gui. clicking that resolved this problem a few minutes later. > I had to repeat for each volume that showed a brick down for which that brick > was not actually down. > --Jim > On Tue, May 29, 2018 at 6:34 AM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu > | > tdeme...@itsmart.hu ] > wrote: >> Hi, >> I've successfully upgraded my hosts and I could raise the cluster level to >> 4.2. >> Everything seems fine, but the monitoring problem does not resolved. My >> bricks >> on first node are shown down (red) , but the glusterfs working fine (I >> verified >> in terminal). >> I've attached my engine.log. >> Thanks in advance, >> R, >> Tibor >> - 2018. máj.. 28., 14:59, Demeter Tibor < [ mailto:tdeme...@itsmart.hu | >> tdeme...@itsmart.hu ] > írta: >>> Hi, >>> Ok I will try it. >>> In this case, is it possible to remove and re-add a host that member of HA >>> gluster ? This is an another task, but I need to separate my gluster network >>> from my ovirtmgmt network. >>> What is the recommended way for do this? >>> It is not important now, but I need to do in future. >>> I will attach my engine.log after upgrade my host. >>> Thanks, >>> Regards. >>> Tibor >>> - 2018. máj.. 28., 14:44, Sahina Bose < [ mailto:sab...@redhat.com | >>> sab...@redhat.com ] > írta: >>>> On Mon, May 28, 2018 at 4:47 PM, Demeter Tibor < [ >>>> mailto:tdeme...@itsmart.hu | >>>> tdeme...@itsmart.hu ] > wrote: >>>>> Dear Sahina, >>>>> Yes, exactly. I can check that check box, but I don't know how is safe >>>>> that. Is >>>>> it safe? >>>> It is safe - if you can ensure that only one host is put into maintenance >>>> at a >>>> time. >>>>> I want to upgrade all of my host. If it will done, then the monitoring >>>>> will work >>>>> perfectly? >>>> If it does not please provide engine.log again once you've upgraded all the >>>> hosts. >>>>> Thanks. >>>>> R. >>>>> Tibor >>>>> - 2018. máj.. 28., 10:09, Sahina Bose < [ mailto:sab...@redhat.com | >>>>> sab...@redhat.com ] > írta: >>>>>> On Mon, May 28, 2018 at 1:06 PM, Demeter Tibor < [ >>>>>> mailto:tdeme...@itsmart.hu | >>>>>> tdeme...@itsmart.hu ] > wrote: >>>>>>> Hi, >>>>>>> Somebody could answer to my question please? >>>>>>> It is very important for me, I could no finish my upgrade process (from >>>>>>> 4.1 to >>>>>>> 4.2) since 9th May! >>>>>> Can you explain how the upgrade process is blocked due to the monitoring? >>>>>> If it's because you cannot move the host to maintenance, can you try >>>>>> with the >>>>>> option "Ignore quorum checks" enabled? >>>>>>> Meanwhile - I don't know why - one of my two gluster volume seems UP >>>>>>> (green) on >>>>>>> the GUI. So, now only one is down. >>>>>>> I need help. What can I do? >>>>>>> Thanks in advance, >>>>>>> Regards, >>>>>>> Tibor >>>>>>> - 2018. máj.. 23., 21:09, Demeter Tibor < [ >>>>>>> mailto:tdeme...@itsmart.hu | >>>>>>> tdeme...@itsmart.hu ] > írta: >>>>>>>> Hi, >>>>>>>> I've updated again to the latest version, but there are no changes. >>>>>>>> All of >>>>>>>> bricks on my first node are down in the GUI (in console are ok) >>>>>>>> An Interesting thing, the "Self-Heal info" column show "OK" for all >>>>>>>> hosts and >>>>>>>> all bricks, but "Space used" column is zero for all hosts/bricks. >>>>>>>> Can I force remove and re-add my host to cluster awhile it is a >>>>>>>> gluster member? >>>>>>>&
[ovirt-users] Re: Gluster quorum
Hi, Ok I will try it. In this case, is it possible to remove and re-add a host that member of HA gluster ? This is an another task, but I need to separate my gluster network from my ovirtmgmt network. What is the recommended way for do this? It is not important now, but I need to do in future. I will attach my engine.log after upgrade my host. Thanks, Regards. Tibor - 2018. máj.. 28., 14:44, Sahina Bose <sab...@redhat.com> írta: > On Mon, May 28, 2018 at 4:47 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu > | > tdeme...@itsmart.hu ] > wrote: >> Dear Sahina, >> Yes, exactly. I can check that check box, but I don't know how is safe that. >> Is >> it safe? > It is safe - if you can ensure that only one host is put into maintenance at a > time. >> I want to upgrade all of my host. If it will done, then the monitoring will >> work >> perfectly? > If it does not please provide engine.log again once you've upgraded all the > hosts. >> Thanks. >> R. >> Tibor >> - 2018. máj.. 28., 10:09, Sahina Bose < [ mailto:sab...@redhat.com | >> sab...@redhat.com ] > írta: >>> On Mon, May 28, 2018 at 1:06 PM, Demeter Tibor < [ >>> mailto:tdeme...@itsmart.hu | >>> tdeme...@itsmart.hu ] > wrote: >>>> Hi, >>>> Somebody could answer to my question please? >>>> It is very important for me, I could no finish my upgrade process (from >>>> 4.1 to >>>> 4.2) since 9th May! >>> Can you explain how the upgrade process is blocked due to the monitoring? >>> If it's because you cannot move the host to maintenance, can you try with >>> the >>> option "Ignore quorum checks" enabled? >>>> Meanwhile - I don't know why - one of my two gluster volume seems UP >>>> (green) on >>>> the GUI. So, now only one is down. >>>> I need help. What can I do? >>>> Thanks in advance, >>>> Regards, >>>> Tibor >>>> - 2018. máj.. 23., 21:09, Demeter Tibor < [ mailto:tdeme...@itsmart.hu >>>> | >>>> tdeme...@itsmart.hu ] > írta: >>>>> Hi, >>>>> I've updated again to the latest version, but there are no changes. All of >>>>> bricks on my first node are down in the GUI (in console are ok) >>>>> An Interesting thing, the "Self-Heal info" column show "OK" for all hosts >>>>> and >>>>> all bricks, but "Space used" column is zero for all hosts/bricks. >>>>> Can I force remove and re-add my host to cluster awhile it is a gluster >>>>> member? >>>>> Is it safe ? >>>>> What can I do? >>>>> I haven't update other hosts while gluster not working fine, or the GUI >>>>> does not >>>>> detect . So my other hosts is remained 4.1 yet :( >>>>> Thanks in advance, >>>>> Regards >>>>> Tibor >>>>> - 2018. máj.. 23., 14:45, Denis Chapligin < [ >>>>> mailto:dchap...@redhat.com | >>>>> dchap...@redhat.com ] > írta: >>>>>> Hello! >>>>>> On Tue, May 22, 2018 at 11:10 AM, Demeter Tibor < [ >>>>>> mailto:tdeme...@itsmart.hu | >>>>>> tdeme...@itsmart.hu ] > wrote: >>>>>>> Is there any changes with this bug? >>>>>>> Still I haven't finish my upgrade process that i've started on 9th may:( >>>>>>> Please help me if you can. >>>>>> Looks like all required patches are already merged, so could you please >>>>>> to >>>>>> update your engine again to the latest night build? >>>>> ___ >>>>> Users mailing list -- [ mailto:users@ovirt.org | users@ovirt.org ] >>>>> To unsubscribe send an email to [ mailto:users-le...@ovirt.org | >>>>> users-le...@ovirt.org ] >>>> ___ >>>> Users mailing list -- [ mailto:users@ovirt.org | users@ovirt.org ] >>>> To unsubscribe send an email to [ mailto:users-le...@ovirt.org | >>>> users-le...@ovirt.org ] >>>> Privacy Statement: [ https://www.ovirt.org/site/privacy-policy/ | >>>> https://www.ovirt.org/site/privacy-policy/ ] >>>> oVirt Code of Conduct: [ >>>> https://www.ovirt.org/community/about/community-guidelines/ | >>>> https://www.ovirt.org/community/about/community-guidelines/ ] >>>> List Archives: [ >>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/MRAAPZSRIXLAJZBV6TRDXXK7R2ISPSDK/ >>>> | >>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/MRAAPZSRIXLAJZBV6TRDXXK7R2ISPSDK/ >>>> ] ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OWA2I6AFZPO56Z2N6D25HUHLW6CGOUWL/
[ovirt-users] Re: Gluster quorum
Dear Sahina, Yes, exactly. I can check that check box, but I don't know how is safe that. Is it safe? I want to upgrade all of my host. If it will done, then the monitoring will work perfectly? Thanks. R. Tibor - 2018. máj.. 28., 10:09, Sahina Bose <sab...@redhat.com> írta: > On Mon, May 28, 2018 at 1:06 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu > | > tdeme...@itsmart.hu ] > wrote: >> Hi, >> Somebody could answer to my question please? >> It is very important for me, I could no finish my upgrade process (from 4.1 >> to >> 4.2) since 9th May! > Can you explain how the upgrade process is blocked due to the monitoring? > If it's because you cannot move the host to maintenance, can you try with the > option "Ignore quorum checks" enabled? >> Meanwhile - I don't know why - one of my two gluster volume seems UP (green) >> on >> the GUI. So, now only one is down. >> I need help. What can I do? >> Thanks in advance, >> Regards, >> Tibor >> - 2018. máj.. 23., 21:09, Demeter Tibor < [ mailto:tdeme...@itsmart.hu | >> tdeme...@itsmart.hu ] > írta: >>> Hi, >>> I've updated again to the latest version, but there are no changes. All of >>> bricks on my first node are down in the GUI (in console are ok) >>> An Interesting thing, the "Self-Heal info" column show "OK" for all hosts >>> and >>> all bricks, but "Space used" column is zero for all hosts/bricks. >>> Can I force remove and re-add my host to cluster awhile it is a gluster >>> member? >>> Is it safe ? >>> What can I do? >>> I haven't update other hosts while gluster not working fine, or the GUI >>> does not >>> detect . So my other hosts is remained 4.1 yet :( >>> Thanks in advance, >>> Regards >>> Tibor >>> - 2018. máj.. 23., 14:45, Denis Chapligin < [ >>> mailto:dchap...@redhat.com | >>> dchap...@redhat.com ] > írta: >>>> Hello! >>>> On Tue, May 22, 2018 at 11:10 AM, Demeter Tibor < [ >>>> mailto:tdeme...@itsmart.hu | >>>> tdeme...@itsmart.hu ] > wrote: >>>>> Is there any changes with this bug? >>>>> Still I haven't finish my upgrade process that i've started on 9th may:( >>>>> Please help me if you can. >>>> Looks like all required patches are already merged, so could you please to >>>> update your engine again to the latest night build? >>> ___ >>> Users mailing list -- [ mailto:users@ovirt.org | users@ovirt.org ] >>> To unsubscribe send an email to [ mailto:users-le...@ovirt.org | >>> users-le...@ovirt.org ] >> ___ >> Users mailing list -- [ mailto:users@ovirt.org | users@ovirt.org ] >> To unsubscribe send an email to [ mailto:users-le...@ovirt.org | >> users-le...@ovirt.org ] >> Privacy Statement: [ https://www.ovirt.org/site/privacy-policy/ | >> https://www.ovirt.org/site/privacy-policy/ ] >> oVirt Code of Conduct: [ >> https://www.ovirt.org/community/about/community-guidelines/ | >> https://www.ovirt.org/community/about/community-guidelines/ ] >> List Archives: [ >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/MRAAPZSRIXLAJZBV6TRDXXK7R2ISPSDK/ >> | >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/MRAAPZSRIXLAJZBV6TRDXXK7R2ISPSDK/ >> ] ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/PORPMZS2OYP2NCKVUJACTVO2ILIYUAQJ/
[ovirt-users] Re: Gluster quorum
Hi, Somebody could answer to my question please? It is very important for me, I could no finish my upgrade process (from 4.1 to 4.2) since 9th May! Meanwhile - I don't know why - one of my two gluster volume seems UP (green) on the GUI. So, now only one is down. I need help. What can I do? Thanks in advance, Regards, Tibor - 2018. máj.. 23., 21:09, Demeter Tibor <tdeme...@itsmart.hu> írta: > Hi, > I've updated again to the latest version, but there are no changes. All of > bricks on my first node are down in the GUI (in console are ok) > An Interesting thing, the "Self-Heal info" column show "OK" for all hosts and > all bricks, but "Space used" column is zero for all hosts/bricks. > Can I force remove and re-add my host to cluster awhile it is a gluster > member? > Is it safe ? > What can I do? > I haven't update other hosts while gluster not working fine, or the GUI does > not > detect . So my other hosts is remained 4.1 yet :( > Thanks in advance, > Regards > Tibor > - 2018. máj.. 23., 14:45, Denis Chapligin <dchap...@redhat.com> írta: >> Hello! >> On Tue, May 22, 2018 at 11:10 AM, Demeter Tibor < [ >> mailto:tdeme...@itsmart.hu | >> tdeme...@itsmart.hu ] > wrote: >>> Is there any changes with this bug? >>> Still I haven't finish my upgrade process that i've started on 9th may:( >>> Please help me if you can. >> Looks like all required patches are already merged, so could you please to >> update your engine again to the latest night build? > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/MRAAPZSRIXLAJZBV6TRDXXK7R2ISPSDK/
[ovirt-users] Re: Gluster quorum
Hi, I've updated again to the latest version, but there are no changes. All of bricks on my first node are down in the GUI (in console are ok) An Interesting thing, the "Self-Heal info" column show "OK" for all hosts and all bricks, but "Space used" column is zero for all hosts/bricks. Can I force remove and re-add my host to cluster awhile it is a gluster member? Is it safe ? What can I do? I haven't update other hosts while gluster not working fine, or the GUI does not detect . So my other hosts is remained 4.1 yet :( Thanks in advance, Regards Tibor - 2018. máj.. 23., 14:45, Denis Chapligin <dchap...@redhat.com> írta: > Hello! > On Tue, May 22, 2018 at 11:10 AM, Demeter Tibor < [ > mailto:tdeme...@itsmart.hu | > tdeme...@itsmart.hu ] > wrote: >> Is there any changes with this bug? >> Still I haven't finish my upgrade process that i've started on 9th may:( >> Please help me if you can. > Looks like all required patches are already merged, so could you please to > update your engine again to the latest night build? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
[ovirt-users] Re: Gluster quorum
Dear Sahina, Is there any changes with this bug? Still I haven't finish my upgrade process that i've started on 9th may:( Please help me if you can. Thanks Tibor - 2018. máj.. 18., 9:29, Demeter Tibor <tdeme...@itsmart.hu> írta: > Hi, > I have to update the engine again? > Thanks, > R > Tibor > - 2018. máj.. 18., 6:47, Sahina Bose <sab...@redhat.com> írta: >> Thanks for reporting this. [ https://gerrit.ovirt.org/91375 | >> https://gerrit.ovirt.org/91375 ] fixes this. I've re-opened bug [ >> https://bugzilla.redhat.com/show_bug.cgi?id=1574508 | >> https://bugzilla.redhat.com/show_bug.cgi?id=1574508 ] >> On Thu, May 17, 2018 at 10:12 PM, Demeter Tibor < [ >> mailto:tdeme...@itsmart.hu | >> tdeme...@itsmart.hu ] > wrote: >>> Hi, >>> 4.2.4-0.0.master.20180515183442.git00e1340.el7.centos >>> Firstly, I did a yum update "ovirt-*-setup*" >>> second, I have ran engine-setup to upgrade. >>> I didn't remove the old repos, just installed the nightly repo. >>> Thank you again, >>> Regards, >>> Tibor >>> - 2018. máj.. 17., 15:02, Sahina Bose < [ mailto:sab...@redhat.com | >>> sab...@redhat.com ] > írta: >>>> It doesn't look like the patch was applied. Still see the same error in >>>> engine.log >>>> "Error while refreshing brick statuses for volume 'volume1' of cluster >>>> 'C6220': >>>> null"\ >>>> Did you use engine-setup to upgrade? What's the version of ovirt-engine >>>> currently installed? >>>> On Thu, May 17, 2018 at 5:10 PM, Demeter Tibor < [ >>>> mailto:tdeme...@itsmart.hu | >>>> tdeme...@itsmart.hu ] > wrote: >>>>> Hi, >>>>> sure, >>>>> Thank you for your time! >>>>> R >>>>> Tibor >>>>> - 2018. máj.. 17., 12:19, Sahina Bose < [ mailto:sab...@redhat.com | >>>>> sab...@redhat.com ] > írta: >>>>>> [+users] >>>>>> Can you provide the engine.log to see why the monitoring is not working >>>>>> here. >>>>>> thanks! >>>>>> On Wed, May 16, 2018 at 2:08 PM, Demeter Tibor < [ >>>>>> mailto:tdeme...@itsmart.hu | >>>>>> tdeme...@itsmart.hu ] > wrote: >>>>>>> Hi, >>>>>>> Meanwhile, I did the upgrade engine, but the gluster state is same on >>>>>>> my first >>>>>>> node. >>>>>>> I've attached some screenshot of my problem. >>>>>>> Thanks >>>>>>> Tibor >>>>>>> - 2018. máj.. 16., 10:16, Demeter Tibor < [ >>>>>>> mailto:tdeme...@itsmart.hu | >>>>>>> tdeme...@itsmart.hu ] > írta Hi, >>>>>>>> If 4.3.4 will release, i just have to remove the nightly repo and >>>>>>>> update to >>>>>>>> stable? >>>>>>>> I'm sorry for my terrible English, I try to explain what was my >>>>>>>> problem with >>>>>>>> update. >>>>>>>> I'm upgraded from 4.1.8. >>>>>>>> I followed up the official hosted-engine update documentation, that >>>>>>>> was not >>>>>>>> clear me, because it has referenced to a lot of old thing (i think). >>>>>>>> [ https://www.ovirt.org/documentation/upgrade-guide/upgrade-guide/ | >>>>>>>> https://www.ovirt.org/documentation/upgrade-guide/upgrade-guide/ ] >>>>>>>> [ >>>>>>>> https://www.ovirt.org/documentation/how-to/hosted-engine/#upgrade-hosted-engine >>>>>>>> | >>>>>>>> https://www.ovirt.org/documentation/how-to/hosted-engine/#upgrade-hosted-engine >>>>>>>> ] >>>>>>>> Maybe it need to update, because I had a lot of question under upgrade >>>>>>>> and I was >>>>>>>> not sure in all of necessary steps. For example, If I need to >>>>>>>> installing the >>>>>>>> new, 4.2 repo on the hosts, then need to remove the old repo from that? >>>>>>>> Why I need to do a" yum update -y" on hosts, meanwhile there is an >>>>>>>> "Updatehost" >>>>>>>> menu in the GUI? So, maybe it outdat
[ovirt-users] Re: Gluster quorum
Hi, I have to update the engine again? Thanks, R Tibor - 2018. máj.. 18., 6:47, Sahina Bose <sab...@redhat.com> írta: > Thanks for reporting this. [ https://gerrit.ovirt.org/91375 | > https://gerrit.ovirt.org/91375 ] fixes this. I've re-opened bug [ > https://bugzilla.redhat.com/show_bug.cgi?id=1574508 | > https://bugzilla.redhat.com/show_bug.cgi?id=1574508 ] > On Thu, May 17, 2018 at 10:12 PM, Demeter Tibor < [ > mailto:tdeme...@itsmart.hu | > tdeme...@itsmart.hu ] > wrote: >> Hi, >> 4.2.4-0.0.master.20180515183442.git00e1340.el7.centos >> Firstly, I did a yum update "ovirt-*-setup*" >> second, I have ran engine-setup to upgrade. >> I didn't remove the old repos, just installed the nightly repo. >> Thank you again, >> Regards, >> Tibor >> - 2018. máj.. 17., 15:02, Sahina Bose < [ mailto:sab...@redhat.com | >> sab...@redhat.com ] > írta: >>> It doesn't look like the patch was applied. Still see the same error in >>> engine.log >>> "Error while refreshing brick statuses for volume 'volume1' of cluster >>> 'C6220': >>> null"\ >>> Did you use engine-setup to upgrade? What's the version of ovirt-engine >>> currently installed? >>> On Thu, May 17, 2018 at 5:10 PM, Demeter Tibor < [ >>> mailto:tdeme...@itsmart.hu | >>> tdeme...@itsmart.hu ] > wrote: >>>> Hi, >>>> sure, >>>> Thank you for your time! >>>> R >>>> Tibor >>>> - 2018. máj.. 17., 12:19, Sahina Bose < [ mailto:sab...@redhat.com | >>>> sab...@redhat.com ] > írta: >>>>> [+users] >>>>> Can you provide the engine.log to see why the monitoring is not working >>>>> here. >>>>> thanks! >>>>> On Wed, May 16, 2018 at 2:08 PM, Demeter Tibor < [ >>>>> mailto:tdeme...@itsmart.hu | >>>>> tdeme...@itsmart.hu ] > wrote: >>>>>> Hi, >>>>>> Meanwhile, I did the upgrade engine, but the gluster state is same on my >>>>>> first >>>>>> node. >>>>>> I've attached some screenshot of my problem. >>>>>> Thanks >>>>>> Tibor >>>>>> - 2018. máj.. 16., 10:16, Demeter Tibor < [ >>>>>> mailto:tdeme...@itsmart.hu | >>>>>> tdeme...@itsmart.hu ] > írta Hi, >>>>>>> If 4.3.4 will release, i just have to remove the nightly repo and >>>>>>> update to >>>>>>> stable? >>>>>>> I'm sorry for my terrible English, I try to explain what was my problem >>>>>>> with >>>>>>> update. >>>>>>> I'm upgraded from 4.1.8. >>>>>>> I followed up the official hosted-engine update documentation, that was >>>>>>> not >>>>>>> clear me, because it has referenced to a lot of old thing (i think). >>>>>>> [ https://www.ovirt.org/documentation/upgrade-guide/upgrade-guide/ | >>>>>>> https://www.ovirt.org/documentation/upgrade-guide/upgrade-guide/ ] >>>>>>> [ >>>>>>> https://www.ovirt.org/documentation/how-to/hosted-engine/#upgrade-hosted-engine >>>>>>> | >>>>>>> https://www.ovirt.org/documentation/how-to/hosted-engine/#upgrade-hosted-engine >>>>>>> ] >>>>>>> Maybe it need to update, because I had a lot of question under upgrade >>>>>>> and I was >>>>>>> not sure in all of necessary steps. For example, If I need to >>>>>>> installing the >>>>>>> new, 4.2 repo on the hosts, then need to remove the old repo from that? >>>>>>> Why I need to do a" yum update -y" on hosts, meanwhile there is an >>>>>>> "Updatehost" >>>>>>> menu in the GUI? So, maybe it outdated. >>>>>>> Since upgrade hosted engine, and the first node, I have problems with >>>>>>> gluster. >>>>>>> It seems to working fine if you check it from console "gluster volume >>>>>>> status, >>>>>>> etc" but not on the Gui, because now it yellow, and the brick reds in >>>>>>> the first >>>>>>> node. >>>>>>> Previously I did a mistake with glusterfs, my gluster config was wrong. >>>>&
[ovirt-users] Re: Gluster quorum
Hi, 4.2.4-0.0.master.20180515183442.git00e1340.el7.centos Firstly, I did a yum update "ovirt-*-setup*" second, I have ran engine-setup to upgrade. I didn't remove the old repos, just installed the nightly repo. Thank you again, Regards, Tibor - 2018. máj.. 17., 15:02, Sahina Bose <sab...@redhat.com> írta: > It doesn't look like the patch was applied. Still see the same error in > engine.log > "Error while refreshing brick statuses for volume 'volume1' of cluster > 'C6220': > null"\ > Did you use engine-setup to upgrade? What's the version of ovirt-engine > currently installed? > On Thu, May 17, 2018 at 5:10 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu > | > tdeme...@itsmart.hu ] > wrote: >> Hi, >> sure, >> Thank you for your time! >> R >> Tibor >> - 2018. máj.. 17., 12:19, Sahina Bose < [ mailto:sab...@redhat.com | >> sab...@redhat.com ] > írta: >>> [+users] >>> Can you provide the engine.log to see why the monitoring is not working >>> here. >>> thanks! >>> On Wed, May 16, 2018 at 2:08 PM, Demeter Tibor < [ >>> mailto:tdeme...@itsmart.hu | >>> tdeme...@itsmart.hu ] > wrote: >>>> Hi, >>>> Meanwhile, I did the upgrade engine, but the gluster state is same on my >>>> first >>>> node. >>>> I've attached some screenshot of my problem. >>>> Thanks >>>> Tibor >>>> - 2018. máj.. 16., 10:16, Demeter Tibor < [ mailto:tdeme...@itsmart.hu >>>> | >>>> tdeme...@itsmart.hu ] > írta Hi, >>>>> If 4.3.4 will release, i just have to remove the nightly repo and update >>>>> to >>>>> stable? >>>>> I'm sorry for my terrible English, I try to explain what was my problem >>>>> with >>>>> update. >>>>> I'm upgraded from 4.1.8. >>>>> I followed up the official hosted-engine update documentation, that was >>>>> not >>>>> clear me, because it has referenced to a lot of old thing (i think). >>>>> [ https://www.ovirt.org/documentation/upgrade-guide/upgrade-guide/ | >>>>> https://www.ovirt.org/documentation/upgrade-guide/upgrade-guide/ ] >>>>> [ >>>>> https://www.ovirt.org/documentation/how-to/hosted-engine/#upgrade-hosted-engine >>>>> | >>>>> https://www.ovirt.org/documentation/how-to/hosted-engine/#upgrade-hosted-engine >>>>> ] >>>>> Maybe it need to update, because I had a lot of question under upgrade >>>>> and I was >>>>> not sure in all of necessary steps. For example, If I need to installing >>>>> the >>>>> new, 4.2 repo on the hosts, then need to remove the old repo from that? >>>>> Why I need to do a" yum update -y" on hosts, meanwhile there is an >>>>> "Updatehost" >>>>> menu in the GUI? So, maybe it outdated. >>>>> Since upgrade hosted engine, and the first node, I have problems with >>>>> gluster. >>>>> It seems to working fine if you check it from console "gluster volume >>>>> status, >>>>> etc" but not on the Gui, because now it yellow, and the brick reds in the >>>>> first >>>>> node. >>>>> Previously I did a mistake with glusterfs, my gluster config was wrong. I >>>>> have >>>>> corrected them, but it did not helped to me,gluster bricks are reds on my >>>>> first >>>>> node yet >>>>> Now I try to upgrade to nightly, but I'm affraid, because it a living, >>>>> productive system, and I don't have downtime. I hope it will help me. >>>>> Thanks for all, >>>>> Regards, >>>>> Tibor Demeter >>>>> - 2018. máj.. 16., 9:58, Sahina Bose < [ mailto:sab...@redhat.com | >>>>> sab...@redhat.com ] > írta: >>>>>> On Wed, May 16, 2018 at 1:19 PM, Demeter Tibor < [ >>>>>> mailto:tdeme...@itsmart.hu | >>>>>> tdeme...@itsmart.hu ] > wrote: >>>>>>> Hi, >>>>>>> is it a different, unstable repo? I have a productive cluster, how is >>>>>>> safe that? >>>>>>> I don't have any experience with nightly build. How can I use this? It >>>>>>> have to >>>>>>> install to the engine VM or all of my
[ovirt-users] IP change in hyperconverged setup
Hi, I would like to change IP subnets of my hosts, but I have a glustered setup and I can't remove/re-add my hosts because "server having gluster volume". What will happen If I do force remove the host? It will kill or stop gluster on host? Thanks Regards, Tibor ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
[ovirt-users] Re: Gluster quorum
Hi,
Could you explain how can I use this patch?
R,
Tibor
- 2018. máj.. 14., 11:18, Demeter Tibor <tdeme...@itsmart.hu> írta:
> Hi,
> Sorry for my question, but can you tell me please how can I use this patch?
> Thanks,
> Regards,
> Tibor
> - 2018. máj.. 14., 10:47, Sahina Bose <sab...@redhat.com> írta:
>> On Sat, May 12, 2018 at 1:14 PM, Demeter Tibor < [
>> mailto:tdeme...@itsmart.hu |
>> tdeme...@itsmart.hu ] > wrote:
>>> Hi,
>>> Could someone help me please ? I can't finish my upgrade process.
>> [ https://gerrit.ovirt.org/91164 | https://gerrit.ovirt.org/91164 ] should
>> fix
>> the error you're facing.
>> Can you elaborate why this is affecting the upgrade process?
>>> Thanks
>>> R
>>> Tibor
>>> - 2018. máj.. 10., 12:51, Demeter Tibor < [ mailto:tdeme...@itsmart.hu |
>>> tdeme...@itsmart.hu ] > írta:
>>>> Hi,
>>>> I've attached the vdsm and supervdsm logs. But I don't have engine.log
>>>> here,
>>>> because that is on hosted engine vm. Should I send that ?
>>>> Thank you
>>>> Regards,
>>>> Tibor
>>>> - 2018. máj.. 10., 12:30, Sahina Bose < [ mailto:sab...@redhat.com |
>>>> sab...@redhat.com ] > írta:
>>>>> There's a bug here. Can you log one attaching this engine.log and also
>>>>> vdsm.log
>>>>> & supervdsm.log from n3.itsmart.cloud
>>>>> On Thu, May 10, 2018 at 3:35 PM, Demeter Tibor < [
>>>>> mailto:tdeme...@itsmart.hu |
>>>>> tdeme...@itsmart.hu ] > wrote:
>>>>>> Hi,
>>>>>> I found this:
>>>>>> 2018-05-10 03:24:19,096+02 INFO
>>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterVolumeAdvancedDetailsVDSCommand]
>>>>>> (DefaultQuartzScheduler7) [43f4eaec] FINISH,
>>>>>> GetGlusterVolumeAdvancedDetailsVDSCommand, return:
>>>>>> org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeAdvancedDetails@ca97448e,
>>>>>> log id: 347435ae
>>>>>> 2018-05-10 03:24:19,097+02 ERROR
>>>>>> [org.ovirt.engine.core.bll.gluster.GlusterSyncJob]
>>>>>> (DefaultQuartzScheduler7)
>>>>>> [43f4eaec] Error while refreshing brick statuses for volume 'volume2' of
>>>>>> cluster 'C6220': null
>>>>>> 2018-05-10 03:24:19,097+02 INFO
>>>>>> [org.ovirt.engine.core.bll.lock.InMemoryLockManager]
>>>>>> (DefaultQuartzScheduler8)
>>>>>> [7715ceda] Failed to acquire lock and wait lock
>>>>>> 'EngineLock:{exclusiveLocks='[59c10db3-0324-0320-0120-0339=GLUSTER]',
>>>>>> sharedLocks=''}'
>>>>>> 2018-05-10 03:24:19,104+02 INFO
>>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>>>>> (DefaultQuartzScheduler7) [43f4eaec] START,
>>>>>> GetGlusterLocalLogicalVolumeListVDSCommand(HostName = n4.itsmart.cloud,
>>>>>> VdsIdVDSCommandParametersBase:{hostId='3ddef95f-158d-407c-a7d8-49641e012755'}),
>>>>>> log id: 6908121d
>>>>>> 2018-05-10 03:24:19,106+02 ERROR
>>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>>>>> (DefaultQuartzScheduler7) [43f4eaec] Command
>>>>>> 'GetGlusterLocalLogicalVolumeListVDSCommand(HostName = n4.itsmart.cloud,
>>>>>> VdsIdVDSCommandParametersBase:{hostId='3ddef95f-158d-407c-a7d8-49641e012755'})'
>>>>>> execution failed: null
>>>>>> 2018-05-10 03:24:19,106+02 INFO
>>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>>>>> (DefaultQuartzScheduler7) [43f4eaec] FINISH,
>>>>>> GetGlusterLocalLogicalVolumeListVDSCommand, log id: 6908121d
>>>>>> 2018-05-10 03:24:19,107+02 INFO
>>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>>>>> (DefaultQuartzScheduler7) [43f4eaec] START,
>>>>>> GetGlusterLocalLogicalVolumeListVDSCommand(HostName = n1.itsmart.cloud,
>>>>>> VdsIdVDSCommandParametersBase:{hostId='8e737bab-e0bb-4f16-ab85-e24e91882f57'}),
>>>>>> log id: 735c6a5f
>>>>>> 2018-05-10 03:24:19,109+02 ERROR
>>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVo
[ovirt-users] Re: Gluster quorum
Hi,
Sorry for my question, but can you tell me please how can I use this patch?
Thanks,
Regards,
Tibor
- 2018. máj.. 14., 10:47, Sahina Bose <sab...@redhat.com> írta:
> On Sat, May 12, 2018 at 1:14 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu
> |
> tdeme...@itsmart.hu ] > wrote:
>> Hi,
>> Could someone help me please ? I can't finish my upgrade process.
> [ https://gerrit.ovirt.org/91164 | https://gerrit.ovirt.org/91164 ] should fix
> the error you're facing.
> Can you elaborate why this is affecting the upgrade process?
>> Thanks
>> R
>> Tibor
>> - 2018. máj.. 10., 12:51, Demeter Tibor < [ mailto:tdeme...@itsmart.hu |
>> tdeme...@itsmart.hu ] > írta:
>>> Hi,
>>> I've attached the vdsm and supervdsm logs. But I don't have engine.log here,
>>> because that is on hosted engine vm. Should I send that ?
>>> Thank you
>>> Regards,
>>> Tibor
>>> - 2018. máj.. 10., 12:30, Sahina Bose < [ mailto:sab...@redhat.com |
>>> sab...@redhat.com ] > írta:
>>>> There's a bug here. Can you log one attaching this engine.log and also
>>>> vdsm.log
>>>> & supervdsm.log from n3.itsmart.cloud
>>>> On Thu, May 10, 2018 at 3:35 PM, Demeter Tibor < [
>>>> mailto:tdeme...@itsmart.hu |
>>>> tdeme...@itsmart.hu ] > wrote:
>>>>> Hi,
>>>>> I found this:
>>>>> 2018-05-10 03:24:19,096+02 INFO
>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterVolumeAdvancedDetailsVDSCommand]
>>>>> (DefaultQuartzScheduler7) [43f4eaec] FINISH,
>>>>> GetGlusterVolumeAdvancedDetailsVDSCommand, return:
>>>>> org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeAdvancedDetails@ca97448e,
>>>>> log id: 347435ae
>>>>> 2018-05-10 03:24:19,097+02 ERROR
>>>>> [org.ovirt.engine.core.bll.gluster.GlusterSyncJob]
>>>>> (DefaultQuartzScheduler7)
>>>>> [43f4eaec] Error while refreshing brick statuses for volume 'volume2' of
>>>>> cluster 'C6220': null
>>>>> 2018-05-10 03:24:19,097+02 INFO
>>>>> [org.ovirt.engine.core.bll.lock.InMemoryLockManager]
>>>>> (DefaultQuartzScheduler8)
>>>>> [7715ceda] Failed to acquire lock and wait lock
>>>>> 'EngineLock:{exclusiveLocks='[59c10db3-0324-0320-0120-0339=GLUSTER]',
>>>>> sharedLocks=''}'
>>>>> 2018-05-10 03:24:19,104+02 INFO
>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>>>> (DefaultQuartzScheduler7) [43f4eaec] START,
>>>>> GetGlusterLocalLogicalVolumeListVDSCommand(HostName = n4.itsmart.cloud,
>>>>> VdsIdVDSCommandParametersBase:{hostId='3ddef95f-158d-407c-a7d8-49641e012755'}),
>>>>> log id: 6908121d
>>>>> 2018-05-10 03:24:19,106+02 ERROR
>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>>>> (DefaultQuartzScheduler7) [43f4eaec] Command
>>>>> 'GetGlusterLocalLogicalVolumeListVDSCommand(HostName = n4.itsmart.cloud,
>>>>> VdsIdVDSCommandParametersBase:{hostId='3ddef95f-158d-407c-a7d8-49641e012755'})'
>>>>> execution failed: null
>>>>> 2018-05-10 03:24:19,106+02 INFO
>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>>>> (DefaultQuartzScheduler7) [43f4eaec] FINISH,
>>>>> GetGlusterLocalLogicalVolumeListVDSCommand, log id: 6908121d
>>>>> 2018-05-10 03:24:19,107+02 INFO
>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>>>> (DefaultQuartzScheduler7) [43f4eaec] START,
>>>>> GetGlusterLocalLogicalVolumeListVDSCommand(HostName = n1.itsmart.cloud,
>>>>> VdsIdVDSCommandParametersBase:{hostId='8e737bab-e0bb-4f16-ab85-e24e91882f57'}),
>>>>> log id: 735c6a5f
>>>>> 2018-05-10 03:24:19,109+02 ERROR
>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>>>> (DefaultQuartzScheduler7) [43f4eaec] Command
>>>>> 'GetGlusterLocalLogicalVolumeListVDSCommand(HostName = n1.itsmart.cloud,
>>>>> VdsIdVDSCommandParametersBase:{hostId='8e737bab-e0bb-4f16-ab85-e24e91882f57'})'
>>>>> execution failed: null
>>>>> 2018-05-10 03:24:19,109+02 INFO
>>>>> [org.ovi
[ovirt-users] Re: Gluster quorum
Meanwhile i just changed my gluster network to 10.104.0.0/24 but does not
happend anything.
Regards,
Tibor
- 2018. máj.. 14., 9:49, Demeter Tibor <tdeme...@itsmart.hu> írta:
> Hi,
> Yes, I have a gluster network, but it's "funny" because that is the
> 10.105.0.x/24. :( Also, the n4.itsmart.cloud is mean 10.104.0.4.
> The 10.104.0.x/24 is my ovirtmgmt network.
> However, the 10.104.0.x is accessable from all hosts.
> What should I do?
> Thanks,
> R
> Tibor
> - 2018. máj.. 12., 17:17, Doug Ingham <dou...@gmail.com> írta:
>> The two key errors I'd investigate are these...
>>> 2018-05-10 03:24:21,048+02 WARN
>>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListReturn]
>>> (DefaultQuartzScheduler8) [7715ceda] Could not associate brick
>>> '10.104.0.1:/gluster/brick/brick1' of volume
>>> 'e0f568fa-987c-4f5c-b853-01bce718ee27' with correct network as no gluster
>>> network found in cluster '59c10db3-0324-0320-0120-0339'
>>> 2018-05-10 03:24:20,749+02 ERROR
>>> [org.ovirt.engine.core.bll.gluster.GlusterSyncJob] (DefaultQuartzScheduler7)
>>> [43f4eaec] Error while refreshing brick statuses for volume 'volume1' of
>>> cluster 'C6220': null
>>> 2018-05-10 11:59:26,051+02 ERROR
>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>> (DefaultQuartzScheduler4) [400fa486] Command
>>> 'GetGlusterLocalLogicalVolumeListVDSCommand(HostName = n4.itsmart.cloud,
>>> VdsIdVDSCommandParametersBase:{hostId='3ddef95f-158d-407c-a7d8-49641e012755'})'
>>> execution failed: null
>> I'd start with that first one. Is the network/interface group of your storage
>> layer actually defined as a Gluster & Migration network within oVirt?
>> On 12 May 2018 at 03:44, Demeter Tibor < [ mailto:tdeme...@itsmart.hu |
>> tdeme...@itsmart.hu ] > wrote:
>>> Hi,
>>> Could someone help me please ? I can't finish my upgrade process.
>>> Thanks
>>> R
>>> Tibor
>>> - 2018. máj.. 10., 12:51, Demeter Tibor < [ mailto:tdeme...@itsmart.hu |
>>> tdeme...@itsmart.hu ] > írta:
>>>> Hi,
>>>> I've attached the vdsm and supervdsm logs. But I don't have engine.log
>>>> here,
>>>> because that is on hosted engine vm. Should I send that ?
>>>> Thank you
>>>> Regards,
>>>> Tibor
>>>> - 2018. máj.. 10., 12:30, Sahina Bose < [ mailto:sab...@redhat.com |
>>>> sab...@redhat.com ] > írta:
>>>>> There's a bug here. Can you log one attaching this engine.log and also
>>>>> vdsm.log
>>>>> & supervdsm.log from n3.itsmart.cloud
>>>>> On Thu, May 10, 2018 at 3:35 PM, Demeter Tibor < [
>>>>> mailto:tdeme...@itsmart.hu |
>>>>> tdeme...@itsmart.hu ] > wrote:
>>>>>> Hi,
>>>>>> I found this:
>>>>>> 2018-05-10 03:24:19,096+02 INFO
>>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterVolumeAdvancedDetailsVDSCommand]
>>>>>> (DefaultQuartzScheduler7) [43f4eaec] FINISH,
>>>>>> GetGlusterVolumeAdvancedDetailsVDSCommand, return:
>>>>>> org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeAdvancedDetails@ca97448e,
>>>>>> log id: 347435ae
>>>>>> 2018-05-10 03:24:19,097+02 ERROR
>>>>>> [org.ovirt.engine.core.bll.gluster.GlusterSyncJob]
>>>>>> (DefaultQuartzScheduler7)
>>>>>> [43f4eaec] Error while refreshing brick statuses for volume 'volume2' of
>>>>>> cluster 'C6220': null
>>>>>> 2018-05-10 03:24:19,097+02 INFO
>>>>>> [org.ovirt.engine.core.bll.lock.InMemoryLockManager]
>>>>>> (DefaultQuartzScheduler8)
>>>>>> [7715ceda] Failed to acquire lock and wait lock
>>>>>> 'EngineLock:{exclusiveLocks='[59c10db3-0324-0320-0120-0339=GLUSTER]',
>>>>>> sharedLocks=''}'
>>>>>> 2018-05-10 03:24:19,104+02 INFO
>>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>>>>> (DefaultQuartzScheduler7) [43f4eaec] START,
>>>>>> GetGlusterLocalLogicalVolumeListVDSCommand(HostName = n4.itsmart.cloud,
>>>>>> VdsIdVDSCommandParametersBase:{hostId='3ddef95f-158d-407c-a7d8-49641e012755'}),
>>>>>> log id: 6908121d
>>>>>> 2018-05-10 03:24:19,106+02 ERROR
>>>>
[ovirt-users] Re: Gluster quorum
Hi,
Yes, I have a gluster network, but it's "funny" because that is the
10.105.0.x/24. :( Also, the n4.itsmart.cloud is mean 10.104.0.4.
The 10.104.0.x/24 is my ovirtmgmt network.
However, the 10.104.0.x is accessable from all hosts.
What should I do?
Thanks,
R
Tibor
- 2018. máj.. 12., 17:17, Doug Ingham <dou...@gmail.com> írta:
> The two key errors I'd investigate are these...
>> 2018-05-10 03:24:21,048+02 WARN
>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListReturn]
>> (DefaultQuartzScheduler8) [7715ceda] Could not associate brick
>> '10.104.0.1:/gluster/brick/brick1' of volume
>> 'e0f568fa-987c-4f5c-b853-01bce718ee27' with correct network as no gluster
>> network found in cluster '59c10db3-0324-0320-0120-0339'
>> 2018-05-10 03:24:20,749+02 ERROR
>> [org.ovirt.engine.core.bll.gluster.GlusterSyncJob] (DefaultQuartzScheduler7)
>> [43f4eaec] Error while refreshing brick statuses for volume 'volume1' of
>> cluster 'C6220': null
>> 2018-05-10 11:59:26,051+02 ERROR
>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>> (DefaultQuartzScheduler4) [400fa486] Command
>> 'GetGlusterLocalLogicalVolumeListVDSCommand(HostName = n4.itsmart.cloud,
>> VdsIdVDSCommandParametersBase:{hostId='3ddef95f-158d-407c-a7d8-49641e012755'})'
>> execution failed: null
> I'd start with that first one. Is the network/interface group of your storage
> layer actually defined as a Gluster & Migration network within oVirt?
> On 12 May 2018 at 03:44, Demeter Tibor < [ mailto:tdeme...@itsmart.hu |
> tdeme...@itsmart.hu ] > wrote:
>> Hi,
>> Could someone help me please ? I can't finish my upgrade process.
>> Thanks
>> R
>> Tibor
>> - 2018. máj.. 10., 12:51, Demeter Tibor < [ mailto:tdeme...@itsmart.hu |
>> tdeme...@itsmart.hu ] > írta:
>>> Hi,
>>> I've attached the vdsm and supervdsm logs. But I don't have engine.log here,
>>> because that is on hosted engine vm. Should I send that ?
>>> Thank you
>>> Regards,
>>> Tibor
>>> - 2018. máj.. 10., 12:30, Sahina Bose < [ mailto:sab...@redhat.com |
>>> sab...@redhat.com ] > írta:
>>>> There's a bug here. Can you log one attaching this engine.log and also
>>>> vdsm.log
>>>> & supervdsm.log from n3.itsmart.cloud
>>>> On Thu, May 10, 2018 at 3:35 PM, Demeter Tibor < [
>>>> mailto:tdeme...@itsmart.hu |
>>>> tdeme...@itsmart.hu ] > wrote:
>>>>> Hi,
>>>>> I found this:
>>>>> 2018-05-10 03:24:19,096+02 INFO
>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterVolumeAdvancedDetailsVDSCommand]
>>>>> (DefaultQuartzScheduler7) [43f4eaec] FINISH,
>>>>> GetGlusterVolumeAdvancedDetailsVDSCommand, return:
>>>>> org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeAdvancedDetails@ca97448e,
>>>>> log id: 347435ae
>>>>> 2018-05-10 03:24:19,097+02 ERROR
>>>>> [org.ovirt.engine.core.bll.gluster.GlusterSyncJob]
>>>>> (DefaultQuartzScheduler7)
>>>>> [43f4eaec] Error while refreshing brick statuses for volume 'volume2' of
>>>>> cluster 'C6220': null
>>>>> 2018-05-10 03:24:19,097+02 INFO
>>>>> [org.ovirt.engine.core.bll.lock.InMemoryLockManager]
>>>>> (DefaultQuartzScheduler8)
>>>>> [7715ceda] Failed to acquire lock and wait lock
>>>>> 'EngineLock:{exclusiveLocks='[59c10db3-0324-0320-0120-0339=GLUSTER]',
>>>>> sharedLocks=''}'
>>>>> 2018-05-10 03:24:19,104+02 INFO
>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>>>> (DefaultQuartzScheduler7) [43f4eaec] START,
>>>>> GetGlusterLocalLogicalVolumeListVDSCommand(HostName = n4.itsmart.cloud,
>>>>> VdsIdVDSCommandParametersBase:{hostId='3ddef95f-158d-407c-a7d8-49641e012755'}),
>>>>> log id: 6908121d
>>>>> 2018-05-10 03:24:19,106+02 ERROR
>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>>>> (DefaultQuartzScheduler7) [43f4eaec] Command
>>>>> 'GetGlusterLocalLogicalVolumeListVDSCommand(HostName = n4.itsmart.cloud,
>>>>> VdsIdVDSCommandParametersBase:{hostId='3ddef95f-158d-407c-a7d8-49641e012755'})'
>>>>> execution failed: null
>>>>> 2018-05-10 03:24:19,106+02 INFO
>>>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalL
[ovirt-users] Re: Gluster quorum
Hi,
Could someone help me please ? I can't finish my upgrade process.
Thanks
R
Tibor
- 2018. máj.. 10., 12:51, Demeter Tibor <tdeme...@itsmart.hu> írta:
> Hi,
> I've attached the vdsm and supervdsm logs. But I don't have engine.log here,
> because that is on hosted engine vm. Should I send that ?
> Thank you
> Regards,
> Tibor
> - 2018. máj.. 10., 12:30, Sahina Bose <sab...@redhat.com> írta:
>> There's a bug here. Can you log one attaching this engine.log and also
>> vdsm.log
>> & supervdsm.log from n3.itsmart.cloud
>> On Thu, May 10, 2018 at 3:35 PM, Demeter Tibor < [
>> mailto:tdeme...@itsmart.hu |
>> tdeme...@itsmart.hu ] > wrote:
>>> Hi,
>>> I found this:
>>> 2018-05-10 03:24:19,096+02 INFO
>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterVolumeAdvancedDetailsVDSCommand]
>>> (DefaultQuartzScheduler7) [43f4eaec] FINISH,
>>> GetGlusterVolumeAdvancedDetailsVDSCommand, return:
>>> org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeAdvancedDetails@ca97448e,
>>> log id: 347435ae
>>> 2018-05-10 03:24:19,097+02 ERROR
>>> [org.ovirt.engine.core.bll.gluster.GlusterSyncJob] (DefaultQuartzScheduler7)
>>> [43f4eaec] Error while refreshing brick statuses for volume 'volume2' of
>>> cluster 'C6220': null
>>> 2018-05-10 03:24:19,097+02 INFO
>>> [org.ovirt.engine.core.bll.lock.InMemoryLockManager]
>>> (DefaultQuartzScheduler8)
>>> [7715ceda] Failed to acquire lock and wait lock
>>> 'EngineLock:{exclusiveLocks='[59c10db3-0324-0320-0120-0339=GLUSTER]',
>>> sharedLocks=''}'
>>> 2018-05-10 03:24:19,104+02 INFO
>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>> (DefaultQuartzScheduler7) [43f4eaec] START,
>>> GetGlusterLocalLogicalVolumeListVDSCommand(HostName = n4.itsmart.cloud,
>>> VdsIdVDSCommandParametersBase:{hostId='3ddef95f-158d-407c-a7d8-49641e012755'}),
>>> log id: 6908121d
>>> 2018-05-10 03:24:19,106+02 ERROR
>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>> (DefaultQuartzScheduler7) [43f4eaec] Command
>>> 'GetGlusterLocalLogicalVolumeListVDSCommand(HostName = n4.itsmart.cloud,
>>> VdsIdVDSCommandParametersBase:{hostId='3ddef95f-158d-407c-a7d8-49641e012755'})'
>>> execution failed: null
>>> 2018-05-10 03:24:19,106+02 INFO
>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>> (DefaultQuartzScheduler7) [43f4eaec] FINISH,
>>> GetGlusterLocalLogicalVolumeListVDSCommand, log id: 6908121d
>>> 2018-05-10 03:24:19,107+02 INFO
>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>> (DefaultQuartzScheduler7) [43f4eaec] START,
>>> GetGlusterLocalLogicalVolumeListVDSCommand(HostName = n1.itsmart.cloud,
>>> VdsIdVDSCommandParametersBase:{hostId='8e737bab-e0bb-4f16-ab85-e24e91882f57'}),
>>> log id: 735c6a5f
>>> 2018-05-10 03:24:19,109+02 ERROR
>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>> (DefaultQuartzScheduler7) [43f4eaec] Command
>>> 'GetGlusterLocalLogicalVolumeListVDSCommand(HostName = n1.itsmart.cloud,
>>> VdsIdVDSCommandParametersBase:{hostId='8e737bab-e0bb-4f16-ab85-e24e91882f57'})'
>>> execution failed: null
>>> 2018-05-10 03:24:19,109+02 INFO
>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>> (DefaultQuartzScheduler7) [43f4eaec] FINISH,
>>> GetGlusterLocalLogicalVolumeListVDSCommand, log id: 735c6a5f
>>> 2018-05-10 03:24:19,110+02 INFO
>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>> (DefaultQuartzScheduler7) [43f4eaec] START,
>>> GetGlusterLocalLogicalVolumeListVDSCommand(HostName = n2.itsmart.cloud,
>>> VdsIdVDSCommandParametersBase:{hostId='06e361ef-3361-4eaa-9923-27fa1a0187a4'}),
>>> log id: 6f9e9f58
>>> 2018-05-10 03:24:19,112+02 ERROR
>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>> (DefaultQuartzScheduler7) [43f4eaec] Command
>>> 'GetGlusterLocalLogicalVolumeListVDSCommand(HostName = n2.itsmart.cloud,
>>> VdsIdVDSCommandParametersBase:{hostId='06e361ef-3361-4eaa-9923-27fa1a0187a4'})'
>>> execution failed: null
>>> 2018-05-10 03:24:19,112+02 INFO
>>> [org.ovirt.engine.core.vdsbroker.gluster.GetGlusterLocalLogicalVolumeListVDSCommand]
>>> (DefaultQuartzScheduler7) [43f4
[ovirt-users] Re: Gluster quorum
te.
> Any errors in vdsm.log?
> Or errors in engine.log of the form "Error while refreshing brick statuses for
> volume"
> On Thu, May 10, 2018 at 2:33 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu
> |
> tdeme...@itsmart.hu ] > wrote:
>> Hi,
>> Thank you for your fast reply :)
>> 2018-05-10 11:01:51,574+02 INFO
>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]
>> (DefaultQuartzScheduler6) [7f01fc2d] START,
>> GlusterServersListVDSCommand(HostName = n2.itsmart.cloud,
>> VdsIdVDSCommandParametersBase:{hostId='06e361ef-3361-4eaa-9923-27fa1a0187a4'}),
>> log id: 39adbbb8
>> 2018-05-10 11:01:51,768+02 INFO
>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]
>> (DefaultQuartzScheduler6) [7f01fc2d] FINISH, GlusterServersListVDSCommand,
>> return: [ [ http://10.101.0.2/24:CONNECTED | 10.101.0.2/24:CONNECTED ] ,
>> n1.cloudata.local:CONNECTED, 10.104.0.3:CONNECTED, 10.104.0.4:CONNECTED], log
>> id: 39adbbb8
>> 2018-05-10 11:01:51,788+02 INFO
>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
>> (DefaultQuartzScheduler6) [7f01fc2d] START,
>> GlusterVolumesListVDSCommand(HostName = n2.itsmart.cloud,
>> GlusterVolumesListVDSParameters:{hostId='06e361ef-3361-4eaa-9923-27fa1a0187a4'}),
>> log id: 738a7261
>> 2018-05-10 11:01:51,892+02 WARN
>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListReturn]
>> (DefaultQuartzScheduler6) [7f01fc2d] Could not associate brick
>> '10.104.0.1:/gluster/brick/brick1' of volume
>> 'e0f568fa-987c-4f5c-b853-01bce718ee27' with correct network as no gluster
>> network found in cluster '59c10db3-0324-0320-0120-0339'
>> 2018-05-10 11:01:51,898+02 WARN
>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListReturn]
>> (DefaultQuartzScheduler6) [7f01fc2d] Could not associate brick
>> '10.104.0.1:/gluster/brick/brick2' of volume
>> 'e0f568fa-987c-4f5c-b853-01bce718ee27' with correct network as no gluster
>> network found in cluster '59c10db3-0324-0320-0120-0339'
>> 2018-05-10 11:01:51,905+02 WARN
>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListReturn]
>> (DefaultQuartzScheduler6) [7f01fc2d] Could not associate brick
>> '10.104.0.1:/gluster/brick/brick3' of volume
>> 'e0f568fa-987c-4f5c-b853-01bce718ee27' with correct network as no gluster
>> network found in cluster '59c10db3-0324-0320-0120-0339'
>> 2018-05-10 11:01:51,911+02 WARN
>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListReturn]
>> (DefaultQuartzScheduler6) [7f01fc2d] Could not associate brick
>> '10.104.0.1:/gluster2/brick/brick1' of volume
>> '68cfb061-1320-4042-abcd-9228da23c0c8' with correct network as no gluster
>> network found in cluster '59c10db3-0324-0320-0120-0339'
>> 2018-05-10 11:01:51,917+02 WARN
>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListReturn]
>> (DefaultQuartzScheduler6) [7f01fc2d] Could not associate brick
>> '10.104.0.1:/gluster2/brick/brick2' of volume
>> '68cfb061-1320-4042-abcd-9228da23c0c8' with correct network as no gluster
>> network found in cluster '59c10db3-0324-0320-0120-0339'
>> 2018-05-10 11:01:51,924+02 WARN
>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListReturn]
>> (DefaultQuartzScheduler6) [7f01fc2d] Could not associate brick
>> '10.104.0.1:/gluster2/brick/brick3' of volume
>> '68cfb061-1320-4042-abcd-9228da23c0c8' with correct network as no gluster
>> network found in cluster '59c10db3-0324-0320-0120-0339'
>> 2018-05-10 11:01:51,925+02 INFO
>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
>> (DefaultQuartzScheduler6) [7f01fc2d] FINISH, GlusterVolumesListVDSCommand,
>> return:
>> {68cfb061-1320-4042-abcd-9228da23c0c8=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@7a6720d,
>> e0f568fa-987c-4f5c-b853-01bce718ee27=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@f88c521b},
>> log id: 738a7261
>> This happening continuously.
>> Thanks!
>> Tibor
>> - 2018. máj.. 10., 10:56, Sahina Bose < [ mailto:sab...@redhat.com |
>> sab...@redhat.com ] > írta:
>>> Could you check the engine.log if there are errors related to getting
>>> GlusterVolumeAdvancedDetails ?
>>> On Thu, May 10, 2018 at 2:02 PM, Demeter Tibor < [
>>> mailto:tdeme...@itsmart.hu |
>>> tdeme...@itsmart.hu ] > wrote:
>>>> Dear Ovirt Users,
>>>> I've followed up the self-hosted-engine upgrade documentation, I upgraded
>>>> my 4.1
>>>&
[ovirt-users] Re: Gluster quorum
Hi,
Thank you for your fast reply :)
2018-05-10 11:01:51,574+02 INFO
[org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]
(DefaultQuartzScheduler6) [7f01fc2d] START,
GlusterServersListVDSCommand(HostName = n2.itsmart.cloud,
VdsIdVDSCommandParametersBase:{hostId='06e361ef-3361-4eaa-9923-27fa1a0187a4'}),
log id: 39adbbb8
2018-05-10 11:01:51,768+02 INFO
[org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]
(DefaultQuartzScheduler6) [7f01fc2d] FINISH, GlusterServersListVDSCommand,
return: [10.101.0.2/24:CONNECTED, n1.cloudata.local:CONNECTED,
10.104.0.3:CONNECTED, 10.104.0.4:CONNECTED], log id: 39adbbb8
2018-05-10 11:01:51,788+02 INFO
[org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
(DefaultQuartzScheduler6) [7f01fc2d] START,
GlusterVolumesListVDSCommand(HostName = n2.itsmart.cloud,
GlusterVolumesListVDSParameters:{hostId='06e361ef-3361-4eaa-9923-27fa1a0187a4'}),
log id: 738a7261
2018-05-10 11:01:51,892+02 WARN
[org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListReturn]
(DefaultQuartzScheduler6) [7f01fc2d] Could not associate brick
'10.104.0.1:/gluster/brick/brick1' of volume
'e0f568fa-987c-4f5c-b853-01bce718ee27' with correct network as no gluster
network found in cluster '59c10db3-0324-0320-0120-0339'
2018-05-10 11:01:51,898+02 WARN
[org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListReturn]
(DefaultQuartzScheduler6) [7f01fc2d] Could not associate brick
'10.104.0.1:/gluster/brick/brick2' of volume
'e0f568fa-987c-4f5c-b853-01bce718ee27' with correct network as no gluster
network found in cluster '59c10db3-0324-0320-0120-0339'
2018-05-10 11:01:51,905+02 WARN
[org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListReturn]
(DefaultQuartzScheduler6) [7f01fc2d] Could not associate brick
'10.104.0.1:/gluster/brick/brick3' of volume
'e0f568fa-987c-4f5c-b853-01bce718ee27' with correct network as no gluster
network found in cluster '59c10db3-0324-0320-0120-0339'
2018-05-10 11:01:51,911+02 WARN
[org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListReturn]
(DefaultQuartzScheduler6) [7f01fc2d] Could not associate brick
'10.104.0.1:/gluster2/brick/brick1' of volume
'68cfb061-1320-4042-abcd-9228da23c0c8' with correct network as no gluster
network found in cluster '59c10db3-0324-0320-0120-0339'
2018-05-10 11:01:51,917+02 WARN
[org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListReturn]
(DefaultQuartzScheduler6) [7f01fc2d] Could not associate brick
'10.104.0.1:/gluster2/brick/brick2' of volume
'68cfb061-1320-4042-abcd-9228da23c0c8' with correct network as no gluster
network found in cluster '59c10db3-0324-0320-0120-0339'
2018-05-10 11:01:51,924+02 WARN
[org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListReturn]
(DefaultQuartzScheduler6) [7f01fc2d] Could not associate brick
'10.104.0.1:/gluster2/brick/brick3' of volume
'68cfb061-1320-4042-abcd-9228da23c0c8' with correct network as no gluster
network found in cluster '59c10db3-0324-0320-0120-0339'
2018-05-10 11:01:51,925+02 INFO
[org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
(DefaultQuartzScheduler6) [7f01fc2d] FINISH, GlusterVolumesListVDSCommand,
return:
{68cfb061-1320-4042-abcd-9228da23c0c8=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@7a6720d,
e0f568fa-987c-4f5c-b853-01bce718ee27=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@f88c521b},
log id: 738a7261
This happening continuously.
Thanks!
Tibor
- 2018. máj.. 10., 10:56, Sahina Bose <sab...@redhat.com> írta:
> Could you check the engine.log if there are errors related to getting
> GlusterVolumeAdvancedDetails ?
> On Thu, May 10, 2018 at 2:02 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu
> |
> tdeme...@itsmart.hu ] > wrote:
>> Dear Ovirt Users,
>> I've followed up the self-hosted-engine upgrade documentation, I upgraded my
>> 4.1
>> system to 4.2.3.
>> I upgaded the first node with yum upgrade, it seems working now fine. But
>> since
>> upgrade, the gluster informations seems to displayed incorrect on the admin
>> panel. The volume yellow, and there are red bricks from that node.
>> I've checked in console, I think my gluster is not degraded:
>> root@n1 ~]# gluster volume list
>> volume1
>> volume2
>> [root@n1 ~]# gluster volume info
>> Volume Name: volume1
>> Type: Distributed-Replicate
>> Volume ID: e0f568fa-987c-4f5c-b853-01bce718ee27
>> Status: Started
>> Snapshot Count: 0
>> Number of Bricks: 3 x 3 = 9
>> Transport-type: tcp
>> Bricks:
>> Brick1: 10.104.0.1:/gluster/brick/brick1
>> Brick2: 10.104.0.2:/gluster/brick/brick1
>> Brick3: 10.104.0.3:/gluster/brick/brick1
>> Brick4: 10.104.0.1:/gluster/brick/brick2
>> Brick5: 10.104.0.2:/gluste
[ovirt-users] Gluster quorum
Dear Ovirt Users, I've followed up the self-hosted-engine upgrade documentation, I upgraded my 4.1 system to 4.2.3. I upgaded the first node with yum upgrade, it seems working now fine. But since upgrade, the gluster informations seems to displayed incorrect on the admin panel. The volume yellow, and there are red bricks from that node. I've checked in console, I think my gluster is not degraded: root@n1 ~]# gluster volume list volume1 volume2 [root@n1 ~]# gluster volume info Volume Name: volume1 Type: Distributed-Replicate Volume ID: e0f568fa-987c-4f5c-b853-01bce718ee27 Status: Started Snapshot Count: 0 Number of Bricks: 3 x 3 = 9 Transport-type: tcp Bricks: Brick1: 10.104.0.1:/gluster/brick/brick1 Brick2: 10.104.0.2:/gluster/brick/brick1 Brick3: 10.104.0.3:/gluster/brick/brick1 Brick4: 10.104.0.1:/gluster/brick/brick2 Brick5: 10.104.0.2:/gluster/brick/brick2 Brick6: 10.104.0.3:/gluster/brick/brick2 Brick7: 10.104.0.1:/gluster/brick/brick3 Brick8: 10.104.0.2:/gluster/brick/brick3 Brick9: 10.104.0.3:/gluster/brick/brick3 Options Reconfigured: transport.address-family: inet performance.readdir-ahead: on nfs.disable: on storage.owner-uid: 36 storage.owner-gid: 36 performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off performance.low-prio-threads: 32 network.remote-dio: enable cluster.eager-lock: enable cluster.quorum-type: auto cluster.server-quorum-type: server cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-max-threads: 8 cluster.shd-wait-qlength: 1 features.shard: on user.cifs: off server.allow-insecure: on Volume Name: volume2 Type: Distributed-Replicate Volume ID: 68cfb061-1320-4042-abcd-9228da23c0c8 Status: Started Snapshot Count: 0 Number of Bricks: 3 x 3 = 9 Transport-type: tcp Bricks: Brick1: 10.104.0.1:/gluster2/brick/brick1 Brick2: 10.104.0.2:/gluster2/brick/brick1 Brick3: 10.104.0.3:/gluster2/brick/brick1 Brick4: 10.104.0.1:/gluster2/brick/brick2 Brick5: 10.104.0.2:/gluster2/brick/brick2 Brick6: 10.104.0.3:/gluster2/brick/brick2 Brick7: 10.104.0.1:/gluster2/brick/brick3 Brick8: 10.104.0.2:/gluster2/brick/brick3 Brick9: 10.104.0.3:/gluster2/brick/brick3 Options Reconfigured: nfs.disable: on performance.readdir-ahead: on transport.address-family: inet cluster.quorum-type: auto network.ping-timeout: 10 auth.allow: * performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off performance.low-prio-threads: 32 network.remote-dio: enable cluster.eager-lock: enable cluster.server-quorum-type: server cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-max-threads: 8 cluster.shd-wait-qlength: 1 features.shard: on user.cifs: off storage.owner-uid: 36 storage.owner-gid: 36 server.allow-insecure: on [root@n1 ~]# gluster volume status Status of volume: volume1 Gluster process TCP Port RDMA Port Online Pid -- Brick 10.104.0.1:/gluster/brick/brick1 49152 0 Y 3464 Brick 10.104.0.2:/gluster/brick/brick1 49152 0 Y 68937 Brick 10.104.0.3:/gluster/brick/brick1 49161 0 Y 94506 Brick 10.104.0.1:/gluster/brick/brick2 49153 0 Y 3457 Brick 10.104.0.2:/gluster/brick/brick2 49153 0 Y 68943 Brick 10.104.0.3:/gluster/brick/brick2 49162 0 Y 94514 Brick 10.104.0.1:/gluster/brick/brick3 49154 0 Y 3465 Brick 10.104.0.2:/gluster/brick/brick3 49154 0 Y 68949 Brick 10.104.0.3:/gluster/brick/brick3 49163 0 Y 94520 Self-heal Daemon on localhost N/A N/A Y 54356 Self-heal Daemon on 10.104.0.2 N/A N/A Y 962 Self-heal Daemon on 10.104.0.3 N/A N/A Y 108977 Self-heal Daemon on 10.104.0.4 N/A N/A Y 61603 Task Status of Volume volume1 -- There are no active volume tasks Status of volume: volume2 Gluster process TCP Port RDMA Port Online Pid -- Brick 10.104.0.1:/gluster2/brick/brick1 49155 0 Y 3852 Brick 10.104.0.2:/gluster2/brick/brick1 49158 0 Y 68955 Brick 10.104.0.3:/gluster2/brick/brick1 49164 0 Y 94527 Brick 10.104.0.1:/gluster2/brick/brick2 49156 0 Y 3851 Brick 10.104.0.2:/gluster2/brick/brick2 49159 0 Y 68961 Brick 10.104.0.3:/gluster2/brick/brick2 49165 0 Y 94533 Brick 10.104.0.1:/gluster2/brick/brick3 49157 0 Y 3883 Brick 10.104.0.2:/gluster2/brick/brick3 49160 0 Y 68968 Brick 10.104.0.3:/gluster2/brick/brick3 49166 0 Y 94541 Self-heal Daemon on localhost N/A N/A Y 54356 Self-heal Daemon on 10.104.0.2 N/A N/A Y 962 Self-heal Daemon on 10.104.0.3 N/A N/A Y 108977 Self-heal Daemon on 10.104.0.4 N/A N/A Y 61603 Task Status of Volume volume2 -- There are no active volume tasks I think ovirt can't read valid informations about
[ovirt-users] Re: Upgrade host to 4.2 - 10gbe connection does not work anymore
Hi, Meanwhile I could repair my network connections. Thank you R Tibor - 2018. máj.. 10., 10:09, Edward Haas <eh...@redhat.com> írta: > egarsHi Tibor, > Could you please provide the output of "ip address" and "vdsm-client Host > getCapabilities", "ethtool "? > Also, please mention what is the network name which is defined to use this > device. > Thanks, > Edy. > On Wed, May 9, 2018 at 3:13 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu | > tdeme...@itsmart.hu ] > wrote: >> Hi All, >> I did successfully upgraded my 4.1 hosted engine and the first node to 4.2.3. >> Since upgrade, the node's 10Gbe connection does not work. It was the >> connection >> between host and storage. That is why, now I can't activate my node. >> I have IP and I have all of bonding, and it seems to fine. All other networks >> and bonds (1gbe) is working fine, I can communicate with other hosts. >> I had a mode-1 (active/passive) bonding on that interfaces. I can ping from >> other nodes, but not from this. >> Also, I did a full OS upgrade (yum update) on node. >> Somebody could me help? >> Thanks in advance, >> R >> Tibor >> ___ >> Users mailing list -- [ mailto:users@ovirt.org | users@ovirt.org ] >> To unsubscribe send an email to [ mailto:users-le...@ovirt.org | >> users-le...@ovirt.org ] ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
[ovirt-users] Upgrade host to 4.2 - 10gbe connection does not work anymore
Hi All, I did successfully upgraded my 4.1 hosted engine and the first node to 4.2.3. Since upgrade, the node's 10Gbe connection does not work. It was the connection between host and storage. That is why, now I can't activate my node. I have IP and I have all of bonding, and it seems to fine. All other networks and bonds (1gbe) is working fine, I can communicate with other hosts. I had a mode-1 (active/passive) bonding on that interfaces. I can ping from other nodes, but not from this. Also, I did a full OS upgrade (yum update) on node. Somebody could me help? Thanks in advance, R Tibor ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
[ovirt-users] Re: Cluster compatibility 4.1 to 4.2 upgrade
Hi, Thank you for the answer. In this case I have to find and another solution to repair live migration. Somebody could help me in this problem? Thanks, R. Tibor - 2018. máj.. 8., 10:38, Gianluca Cecchi <gianluca.cec...@gmail.com> írta: > On Tue, May 8, 2018 at 9:29 AM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu | > tdeme...@itsmart.hu ] > wrote: >> Dear Listmember, >> I've just upgrade to my ovirt-hosted-engine from 4.1 to 4.2.3. It was >> successful, but it saw " Data Center XYZ compatibility version is 4.1, which >> is >> lower than latest engine version 4.2. Please upgrade your Data Center to >> latest >> version to successfully finish upgrade of your setup." >> My first question is that, it need to do BEFORE or AFTER the node upgrades? > I answer for the upgrade of DC/Cluster level. > You can upgrade DC level when you have upgraded level of all its Clusters > You can upgrade Cluster level when you have upgraded all its hosts > More info here: > [ https://www.ovirt.org/documentation/upgrade-guide/chap-Post-Upgrade_Tasks/ | > https://www.ovirt.org/documentation/upgrade-guide/chap-Post-Upgrade_Tasks/ ] > HIH, > Gianluca ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
[ovirt-users] Cluster compatibility 4.1 to 4.2 upgrade
Dear Listmember, I've just upgrade to my ovirt-hosted-engine from 4.1 to 4.2.3. It was successful, but it saw " Data Center XYZ compatibility version is 4.1, which is lower than latest engine version 4.2. Please upgrade your Data Center to latest version to successfully finish upgrade of your setup." My first question is that, it need to do BEFORE or AFTER the node upgrades? I haven't upgrade my nodes yet, because after upgrade the live migration does not work with some VMs. It seems only affected those VMs that's have big (>8GB ) memory. It counting to 99 percent and after a while just stopped. At this moment I can't stop my affected, productive VMs, so I can't do the upgrade of nodes. I just wondering, if i do the upgrade to 4.2 , that's maybe repair my the live migration function? What can I do? Centos 7.4, NFS storage, 4 nodes, Hyperconverged hosted engine. Thanks in advance, Tibor ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
Re: [ovirt-users] bonding mode-alb
Dear Luca, I've created a config with two 16 port 10GBe switches,those does not connected to each other. I have 4 hosts and 1 storage host. I don't know why, but I can't ping from all of host to all of hosts. For example I can ping from .1 to .2 but not .3! From .3 I can ping .4 but don't .1 :) I don't know the cables how is connected to the switch, but I'm sure every host connected to switches whit two inferface (one-to-one) Thanks! Regards, Tibor - 2018. jan.. 26., 14:06, Luca remix_tj Lorenzetto lorenzetto.l...@gmail.com írta: > Hi Demeter, > > i don't know how the switch setup is done here, but as far as i know > they aren't stacked through interconnect. > > Luca > > On Fri, Jan 26, 2018 at 1:44 PM, Demeter Tibor <tdeme...@itsmart.hu> wrote: >> Dear Luca, >> >> Sorry for the very late reply.. >> >> I want to try out now your mentions. >> Should I make an interconnect the two switches in active/backup mode? >> Thanks! >> >> Tibor >> >> - 2017. dec.. 12., 19:35, Luca 'remix_tj' Lorenzetto >> <lorenzetto.l...@gmail.com> írta: >> >> Hi, >> >> If you're looking at a simple ha bonding setup, why not using active-backup >> (mode 1)? >> >> We're using it in almost all our setups and switches toin backup interface >> in 100ms when a link down is detected (Setting miimon=100). >> >> Doesn't aggregate bandwidth but is a very good solution for high >> availability whwn you can't configure lacp or a portchannel on switch side. >> >> Luca >> >> >> Il 12 dic 2017 7:06 PM, "Demeter Tibor" <tdeme...@itsmart.hu> ha scritto: >>> >>> Hi, >>> >>> Thanks for the answers. >>> >>> In this case the only question is: what is better for me? Mode 5 or 6? >>> In which modes how is fast the switching? >>> >>> Until now I've use 802.3ad lacp on our old cluster. I did some tests and >>> it was very fast. I know it is not same, but mode 5 or 6 how is safe? >>> Thanks >>> >>> Regards, >>> >>> Tibor >>> >>> >>> >>> - 2017. dec.. 11., 13:24, Simone Tiraboschi <stira...@redhat.com> >>> írta: >>> >>> >>> >>> On Mon, Dec 11, 2017 at 12:53 PM, Demeter Tibor <tdeme...@itsmart.hu> >>> wrote: >>>> >>>> Hi, >>>> >>>> Could help anyone for me in this question? >>>> >>>> Thanks. >>>> >>>> R. >>>> >>>> Tibor >>>> >>>> >>>> >>>> - 2017. dec.. 6., 14:07, Demeter Tibor <tdeme...@itsmart.hu> írta: >>>> >>>> Dear members, >>>> >>>> I would like to use two switch to make high-availability network >>>> connection for my nfs storage. >>>> Unfortunately, these switches does not support 802.3.ad lacp, (really I >>>> can't stack them) but I've read about mode-alb and mode-tlb bonding modes. >>>> I know,these modes are available in ovirt, but how is work that? Also how >>>> is safe? Are there for HA or for load balance? >>>> >>>> I've read some forums, where does not recommended these modes to use in >>>> ovirt. What is the truths? >>>> I would like to use only for storage-traffic, it will be separated from >>>> other network traffic. I have two 10Gbe switches and two 10Gbe ports in my >>>> nodes. >>>> >>> >>> Look here: >>> >>> https://www.ovirt.org/documentation/admin-guide/chap-Logical_Networks/#bonds-1 >>> >>> "Important: Modes 1, 2, 3, and 4 support both virtual machine (bridged) >>> and non-virtual machine (bridgeless) network types. Modes 0, 5 and 6 support >>> non-virtual machine (bridgeless) networks only.¨ >>> >>> So both tlb (mode 5) or alb (mode 6) are fine only if you use them just >>> for the storage access but not for VMs. >>> >>>> >>>> Thanks in advance, >>>> >>>> R >>>> >>>> Tibor >>>> >>>> >>>> >>>> ___ >>>> Users mailing list >>>> Users@ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>>> ___ >>>> Users mailing list >>>> Users@ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>> >>> >>> ___ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >> >> > > > > -- > "E' assurdo impiegare gli uomini di intelligenza eccellente per fare > calcoli che potrebbero essere affidati a chiunque se si usassero delle > macchine" > Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716) > > "Internet è la più grande biblioteca del mondo. > Ma il problema è che i libri sono tutti sparsi sul pavimento" > John Allen Paulos, Matematico (1945-vivente) > > Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , > <lorenzetto.l...@gmail.com> ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] bonding mode-alb
Dear Luca, Sorry for the very late reply.. I want to try out now your mentions. Should I make an interconnect the two switches in active/backup mode? Thanks! Tibor - 2017. dec.. 12., 19:35, Luca 'remix_tj' Lorenzetto <lorenzetto.l...@gmail.com> írta: > Hi, > If you're looking at a simple ha bonding setup, why not using active-backup > (mode 1)? > We're using it in almost all our setups and switches toin backup interface in > 100ms when a link down is detected (Setting miimon=100). > Doesn't aggregate bandwidth but is a very good solution for high availability > whwn you can't configure lacp or a portchannel on switch side. > Luca > Il 12 dic 2017 7:06 PM, "Demeter Tibor" < [ mailto:tdeme...@itsmart.hu | > tdeme...@itsmart.hu ] > ha scritto: >> Hi, >> Thanks for the answers. >> In this case the only question is: what is better for me? Mode 5 or 6? >> In which modes how is fast the switching? >> Until now I've use 802.3ad lacp on our old cluster. I did some tests and it >> was >> very fast. I know it is not same, but mode 5 or 6 how is safe? >> Thanks >> Regards, >> Tibor >> - 2017. dec.. 11., 13:24, Simone Tiraboschi < [ >> mailto:stira...@redhat.com | >> stira...@redhat.com ] > írta: >>> On Mon, Dec 11, 2017 at 12:53 PM, Demeter Tibor < [ >>> mailto:tdeme...@itsmart.hu | >>> tdeme...@itsmart.hu ] > wrote: >>>> Hi, >>>> Could help anyone for me in this question? >>>> Thanks. >>>> R. >>>> Tibor >>>> - 2017. dec.. 6., 14:07, Demeter Tibor < [ mailto:tdeme...@itsmart.hu | >>>> tdeme...@itsmart.hu ] > írta: >>>>> Dear members, >>>>> I would like to use two switch to make high-availability network >>>>> connection for >>>>> my nfs storage. >>>>> Unfortunately, these switches does not support [ http://802.3.ad/ | >>>>> 802.3.ad ] >>>>> lacp, (really I can't stack them) but I've read about mode-alb and >>>>> mode-tlb >>>>> bonding modes. >>>>> I know,these modes are available in ovirt, but how is work that? Also how >>>>> is >>>>> safe? Are there for HA or for load balance? >>>>> I've read some forums, where does not recommended these modes to use in >>>>> ovirt. >>>>> What is the truths? >>>>> I would like to use only for storage-traffic, it will be separated from >>>>> other >>>>> network traffic. I have two 10Gbe switches and two 10Gbe ports in my >>>>> nodes. >>> Look here: >>> [ >>> https://www.ovirt.org/documentation/admin-guide/chap-Logical_Networks/#bonds-1 >>> | >>> https://www.ovirt.org/documentation/admin-guide/chap-Logical_Networks/#bonds-1 >>> ] >>> "Important: Modes 1, 2, 3, and 4 support both virtual machine (bridged) and >>> non-virtual machine (bridgeless) network types. Modes 0, 5 and 6 support >>> non-virtual machine (bridgeless) networks only.¨ >>> So both tlb (mode 5) or alb (mode 6) are fine only if you use them just for >>> the >>> storage access but not for VMs. >>>>> Thanks in advance, >>>>> R >>>>> Tibor >>>>> ___ >>>>> Users mailing list >>>>> [ mailto:Users@ovirt.org | Users@ovirt.org ] >>>>> [ http://lists.ovirt.org/mailman/listinfo/users | >>>>> http://lists.ovirt.org/mailman/listinfo/users ] >>>> ___ >>>> Users mailing list >>>> [ mailto:Users@ovirt.org | Users@ovirt.org ] >>>> [ http://lists.ovirt.org/mailman/listinfo/users | >>>> http://lists.ovirt.org/mailman/listinfo/users ] >> ___ >> Users mailing list >> [ mailto:Users@ovirt.org | Users@ovirt.org ] >> [ http://lists.ovirt.org/mailman/listinfo/users | >> http://lists.ovirt.org/mailman/listinfo/users ] ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] bonding mode-alb
Hi, Thanks for the answers. In this case the only question is: what is better for me? Mode 5 or 6? In which modes how is fast the switching? Until now I've use 802.3ad lacp on our old cluster. I did some tests and it was very fast. I know it is not same, but mode 5 or 6 how is safe? Thanks Regards, Tibor - 2017. dec.. 11., 13:24, Simone Tiraboschi <stira...@redhat.com> írta: > On Mon, Dec 11, 2017 at 12:53 PM, Demeter Tibor < [ > mailto:tdeme...@itsmart.hu | > tdeme...@itsmart.hu ] > wrote: >> Hi, >> Could help anyone for me in this question? >> Thanks. >> R. >> Tibor >> - 2017. dec.. 6., 14:07, Demeter Tibor < [ mailto:tdeme...@itsmart.hu | >> tdeme...@itsmart.hu ] > írta: >>> Dear members, >>> I would like to use two switch to make high-availability network connection >>> for >>> my nfs storage. >>> Unfortunately, these switches does not support [ http://802.3.ad/ | >>> 802.3.ad ] >>> lacp, (really I can't stack them) but I've read about mode-alb and mode-tlb >>> bonding modes. >>> I know,these modes are available in ovirt, but how is work that? Also how is >>> safe? Are there for HA or for load balance? >>> I've read some forums, where does not recommended these modes to use in >>> ovirt. >>> What is the truths? >>> I would like to use only for storage-traffic, it will be separated from >>> other >>> network traffic. I have two 10Gbe switches and two 10Gbe ports in my nodes. > Look here: > [ > https://www.ovirt.org/documentation/admin-guide/chap-Logical_Networks/#bonds-1 > | > https://www.ovirt.org/documentation/admin-guide/chap-Logical_Networks/#bonds-1 > ] > "Important: Modes 1, 2, 3, and 4 support both virtual machine (bridged) and > non-virtual machine (bridgeless) network types. Modes 0, 5 and 6 support > non-virtual machine (bridgeless) networks only.¨ > So both tlb (mode 5) or alb (mode 6) are fine only if you use them just for > the > storage access but not for VMs. >>> Thanks in advance, >>> R >>> Tibor >>> ___ >>> Users mailing list >>> [ mailto:Users@ovirt.org | Users@ovirt.org ] >>> [ http://lists.ovirt.org/mailman/listinfo/users | >>> http://lists.ovirt.org/mailman/listinfo/users ] >> ___ >> Users mailing list >> [ mailto:Users@ovirt.org | Users@ovirt.org ] >> [ http://lists.ovirt.org/mailman/listinfo/users | >> http://lists.ovirt.org/mailman/listinfo/users ] ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] bonding mode-alb
Hi, Could help anyone for me in this question? Thanks. R. Tibor - 2017. dec.. 6., 14:07, Demeter Tibor <tdeme...@itsmart.hu> írta: > Dear members, > I would like to use two switch to make high-availability network connection > for > my nfs storage. > Unfortunately, these switches does not support 802.3.ad lacp, (really I can't > stack them) but I've read about mode-alb and mode-tlb bonding modes. > I know,these modes are available in ovirt, but how is work that? Also how is > safe? Are there for HA or for load balance? > I've read some forums, where does not recommended these modes to use in ovirt. > What is the truths? > I would like to use only for storage-traffic, it will be separated from other > network traffic. I have two 10Gbe switches and two 10Gbe ports in my nodes. > Thanks in advance, > R > Tibor > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] bonding mode-alb
Dear members, I would like to use two switches for make high-availability network connection for my nfs storge. Unfortunately, these switches does not support 802.3.ad lacp, (really I can't stack them) but I've read about mode-alb and mode-tlb bonding modes. I know,these modes are available in ovirt, but how is work that? Also how is safe? Are there for HA or for load balance? I've read some forums, where does not recommended these modes to use in ovirt. What is the truths? I would like to use only for storage-traffic, it will be separated from other network traffic. I have two 10Gbe switches and two 10Gbe ports in my nodes. Thanks in advance, R Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Convert local storage domain to shared
Hi, Yes, I understand what do you talk about. It isn't too safe..:( We have terrabytes under that VM. I could make a downtime at most for eight hours (maybe), but meanwhile I have to copy 3 TB of vdisks. Firstly I need export (with a gigabit nic) to export domain, and back under 10gbe nic. I don't know how is enough this. Thanks Tibor - 2017. nov.. 29., 18:26, Christopher Cox c...@endlessnow.com írta: > On 11/29/2017 09:39 AM, Demeter Tibor wrote: >> >> Dear Users, >> >> We have an old ovirt3.5 install with a local and a shared clusters. >> Meanwhile we >> created a new data center, that based on 4.1 and it use only shared >> infrastructure. >> I would like to migrate an big VM from the old local datacenter to our new, >> but >> I don't have enough downtime. >> >> Is it possible to convert the old local storage to shared (by share via NFS) >> and >> attach that as new storage domain to the new cluster? >> I just want to import VM and copy (while running) with live storage migration >> function. >> >> I know, the official way for move vms between ovirt clusters is the export >> domain, but it has very big disks. >> >> What can I do? > > Just my opinion, but if you don't figure out a way to have occasional > downtime, > you'll probably pay the price with unplanned downtime eventually (and it could > be painful). > > Define "large disks"? Terabytes? > > I know for a fact that if you don't have good network segmentation that live > migrations of large disks can be very problematic. And I'm not talking about > what you're wanting to do. I'm just talking about storage migration. > > We successfully migrated hundreds of VMs from a 3.4 to a 3.6 (on new blades > and > storage) last year over time using the NFS export domain method. > > If storage is the same across DC's, you might be able to shortcut this with > minimal downtime, but I'm pretty sure there will be some downtime. > > I've seen large storage migrations render entire nodes offline (not nice) due > to > non-isolated paths or QoS. > > > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Convert local storage domain to shared
Dear Users, We have an old ovirt3.5 install with a local and a shared clusters. Meanwhile we created a new data center, that based on 4.1 and it use only shared infrastructure. I would like to migrate an big VM from the old local datacenter to our new, but I don't have enough downtime. Is it possible to convert the old local storage to shared (by share via NFS) and attach that as new storage domain to the new cluster? I just want to import VM and copy (while running) with live storage migration function. I know, the official way for move vms between ovirt clusters is the export domain, but it has very big disks. What can I do? Thanks Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Snapshot or not?
Hi, https://pastebin.com/raw/cFrphHHh The problematic disk is d1db6e0e-87d0-4124-8326-b18bff3fdf90 What can I do? Thank you for your time! Tibor - 2017. nov.. 16., 22:40, Nir Soffer <nsof...@redhat.com> írta: > On Thu, Nov 16, 2017 at 7:11 PM Demeter Tibor < [ mailto:tdeme...@itsmart.hu | > tdeme...@itsmart.hu ] > wrote: >> Hi, >> Sorry for my bad English:( >> Ovirt could not import my VM and disks from original storge-domain. It is an >> NFS >> share on a server. >> Then I create an another NFS share on same storage and attached to ovirt as >> new >> storgae domain. >> At this step I've created a new VM on new storage-domain with same disks. >> (three >> think provisioned, 100GB, 60GB and 13TB disks). It was necessary, because >> ovirt >> cant import my original disks and VM from the re-attached storage domain. >> Finally I renamed my old disks from old storage domain to new on new storgae >> domain (it was possible because are there on same file system on nfs server) >> At this moment only two virtual disk working fine. The 100 and 60GB disks >> does >> working fine, but the 13TB is not. It has a snapshot. Or not? Is it a >> snapshot >> or not? >> My problem is inside VM I see the content as raw disk. I thing Ovirt don't >> want >> to use it as a snapshotted image. Or what ? > Demeter, can you share the output of this command on a host running your vm? > virsh -r dumpxml vm-name > Nir >> Thank you. >> Tibor >> - 2017. nov.. 16., 15:57, Benny Zlotnik < [ mailto:bzlot...@redhat.com | >> bzlot...@redhat.com ] > írta: >>> Hi Tibor, >>> Can you please explain this part: " After this I just wondered, I will make >>> a >>> new VM with same disk and I will copy the images (really just rename) from >>> original to recreated." >>> What were the exact steps you took? >>> Thanks >>> On Thu, Nov 16, 2017 at 4:19 PM, Demeter Tibor < [ >>> mailto:tdeme...@itsmart.hu | >>> tdeme...@itsmart.hu ] > wrote: >>>> Hi, >>>> Thank you for your reply. >>>> So. I have a disk with snapshot. Or - really - I just think that is a >>>> snapshot. >>>> It was attached originally to a VM (with other two disks, that is not have >>>> snapshot) I did a detach-attach-storage procedure, but after attach, - I >>>> don't >>>> know why - ovirt could not import the VM and disks from this (ovirt said >>>> it is >>>> not possible). After this I just wondered, I will make a new VM with same >>>> disk >>>> and I will copy the images (really just rename) from original to recreated. >>>> It was partial success because the VM can boot, but the disk, where there >>>> is a >>>> snapshot I can't read the LVM table. I see just it seems to corrupt. >>>> Now this disk in a very interested state: I can see the snapshot datas >>>> from the >>>> vm as raw disk. >>>> I think Ovirt don't know that is a snapshotted image and attach to VM as >>>> raw >>>> disk. >>>> So my really question, how can I add this disk image as good to ovirt? >>>> Please help me, it is very important me.:( >>>> Thanks in advance, >>>> Have a nice day, >>>> Tibor >>>> - 2017. nov.. 16., 11:55, Ala Hino < [ mailto:ah...@redhat.com | >>>> ah...@redhat.com ] > írta: >>>>> Hi Tibor, >>>>> I am not sure I completely understand the scenario. >>>>> You have a VM with two disks and then you create a snapshot including the >>>>> two >>>>> disks? >>>>> Before creating the snapshot, did the VM recognize the two disks? >>>>> On Mon, Nov 13, 2017 at 10:36 PM, Demeter Tibor < [ >>>>> mailto:tdeme...@itsmart.hu | >>>>> tdeme...@itsmart.hu ] > wrote: >>>>>> Dear Users, >>>>>> I have a disk of a vm, that is have a snapshot. It is very interesting, >>>>>> because >>>>>> there are two other disk of that VM, but there are no snapshots of them. >>>>>> I found this while I've try to migrate a storage-domain between two >>>>>> datacenter. >>>>>> Because, I didn't import that vm from the storage domain, I did an >>>>>> another >>>>>>
Re: [ovirt-users] Snapshot or not?
Hi, Sorry for my bad English:( Ovirt could not import my VM and disks from original storge-domain. It is an NFS share on a server. Then I create an another NFS share on same storage and attached to ovirt as new storgae domain. At this step I've created a new VM on new storage-domain with same disks. (three think provisioned, 100GB, 60GB and 13TB disks). It was necessary, because ovirt cant import my original disks and VM from the re-attached storage domain. Finally I renamed my old disks from old storage domain to new on new storgae domain (it was possible because are there on same file system on nfs server) At this moment only two virtual disk working fine. The 100 and 60GB disks does working fine, but the 13TB is not. It has a snapshot. Or not? Is it a snapshot or not? My problem is inside VM I see the content as raw disk. I thing Ovirt don't want to use it as a snapshotted image. Or what ? Thank you. Tibor - 2017. nov.. 16., 15:57, Benny Zlotnik <bzlot...@redhat.com> írta: > Hi Tibor, > Can you please explain this part: " After this I just wondered, I will make a > new VM with same disk and I will copy the images (really just rename) from > original to recreated." > What were the exact steps you took? > Thanks > On Thu, Nov 16, 2017 at 4:19 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu > | > tdeme...@itsmart.hu ] > wrote: >> Hi, >> Thank you for your reply. >> So. I have a disk with snapshot. Or - really - I just think that is a >> snapshot. >> It was attached originally to a VM (with other two disks, that is not have >> snapshot) I did a detach-attach-storage procedure, but after attach, - I >> don't >> know why - ovirt could not import the VM and disks from this (ovirt said it >> is >> not possible). After this I just wondered, I will make a new VM with same >> disk >> and I will copy the images (really just rename) from original to recreated. >> It was partial success because the VM can boot, but the disk, where there is >> a >> snapshot I can't read the LVM table. I see just it seems to corrupt. >> Now this disk in a very interested state: I can see the snapshot datas from >> the >> vm as raw disk. >> I think Ovirt don't know that is a snapshotted image and attach to VM as raw >> disk. >> So my really question, how can I add this disk image as good to ovirt? >> Please help me, it is very important me.:( >> Thanks in advance, >> Have a nice day, >> Tibor >> - 2017. nov.. 16., 11:55, Ala Hino < [ mailto:ah...@redhat.com | >> ah...@redhat.com ] > írta: >>> Hi Tibor, >>> I am not sure I completely understand the scenario. >>> You have a VM with two disks and then you create a snapshot including the >>> two >>> disks? >>> Before creating the snapshot, did the VM recognize the two disks? >>> On Mon, Nov 13, 2017 at 10:36 PM, Demeter Tibor < [ >>> mailto:tdeme...@itsmart.hu | >>> tdeme...@itsmart.hu ] > wrote: >>>> Dear Users, >>>> I have a disk of a vm, that is have a snapshot. It is very interesting, >>>> because >>>> there are two other disk of that VM, but there are no snapshots of them. >>>> I found this while I've try to migrate a storage-domain between two >>>> datacenter. >>>> Because, I didn't import that vm from the storage domain, I did an another >>>> similar VM with exactly same sized thin-provisioned disks. I have renamed, >>>> copied to here my originals. >>>> The VM started successfully, but the disk that contain a snapshot did not >>>> recognized by the os. I can see the whole disk as raw. (disk id, format in >>>> ovirt, filenames of images, etc) . I think ovirt don't know that is a >>>> snapshotted image and use as raw. Is it possible? >>>> I don't see any snapshot in snapshots. Also I have try to list snapshots >>>> with >>>> qemu-img info and qemu-img snapshot -l , but it does not see any snapshots >>>> in >>>> the image. >>>> Really, I don't know how is possible this. >>>> [root@storage1 8d815282-6957-41c0-bb3e-6c8f4a23a64b]# qemu-img info >>>> 5974fd33-af4c-4e3b-aadb-bece6054eb6b >>>> image: 5974fd33-af4c-4e3b-aadb-bece6054eb6b >>>> file format: qcow2 >>>> virtual size: 13T (13958643712000 bytes) >>>> disk size: 12T >>>> cluster_size: 65536 >>>> backing file: >>>> ../8d815282-6957-41c0-bb3e-6c8f4a23a64b/723ad5aa-02f6-4067-ac75-0ce0a761627f >>>> backing file format: r
Re: [ovirt-users] Snapshot or not?
Hi, Thank you for your reply. So. I have a disk with snapshot. Or - really - I just think that is a snapshot. It was attached originally to a VM (with other two disks, that is not have snapshot) I did a detach-attach-storage procedure, but after attach, - I don't know why - ovirt could not import the VM and disks from this (ovirt said it is not possible). After this I just wondered, I will make a new VM with same disk and I will copy the images (really just rename) from original to recreated. It was partial success because the VM can boot, but the disk, where there is a snapshot I can't read the LVM table. I see just it seems to corrupt. Now this disk in a very interested state: I can see the snapshot datas from the vm as raw disk. I think Ovirt don't know that is a snapshotted image and attach to VM as raw disk. So my really question, how can I add this disk image as good to ovirt? Please help me, it is very important me.:( Thanks in advance, Have a nice day, Tibor - 2017. nov.. 16., 11:55, Ala Hino <ah...@redhat.com> írta: > Hi Tibor, > I am not sure I completely understand the scenario. > You have a VM with two disks and then you create a snapshot including the two > disks? > Before creating the snapshot, did the VM recognize the two disks? > On Mon, Nov 13, 2017 at 10:36 PM, Demeter Tibor < [ > mailto:tdeme...@itsmart.hu | > tdeme...@itsmart.hu ] > wrote: >> Dear Users, >> I have a disk of a vm, that is have a snapshot. It is very interesting, >> because >> there are two other disk of that VM, but there are no snapshots of them. >> I found this while I've try to migrate a storage-domain between two >> datacenter. >> Because, I didn't import that vm from the storage domain, I did an another >> similar VM with exactly same sized thin-provisioned disks. I have renamed, >> copied to here my originals. >> The VM started successfully, but the disk that contain a snapshot did not >> recognized by the os. I can see the whole disk as raw. (disk id, format in >> ovirt, filenames of images, etc) . I think ovirt don't know that is a >> snapshotted image and use as raw. Is it possible? >> I don't see any snapshot in snapshots. Also I have try to list snapshots with >> qemu-img info and qemu-img snapshot -l , but it does not see any snapshots in >> the image. >> Really, I don't know how is possible this. >> [root@storage1 8d815282-6957-41c0-bb3e-6c8f4a23a64b]# qemu-img info >> 5974fd33-af4c-4e3b-aadb-bece6054eb6b >> image: 5974fd33-af4c-4e3b-aadb-bece6054eb6b >> file format: qcow2 >> virtual size: 13T (13958643712000 bytes) >> disk size: 12T >> cluster_size: 65536 >> backing file: >> ../8d815282-6957-41c0-bb3e-6c8f4a23a64b/723ad5aa-02f6-4067-ac75-0ce0a761627f >> backing file format: raw >> Format specific information: >> compat: 0.10 >> [root@storage1 8d815282-6957-41c0-bb3e-6c8f4a23a64b]# qemu-img info >> 723ad5aa-02f6-4067-ac75-0ce0a761627f >> image: 723ad5aa-02f6-4067-ac75-0ce0a761627f >> file format: raw >> virtual size: 2.0T (2147483648000 bytes) >> disk size: 244G >> [root@storage1 8d815282-6957-41c0-bb3e-6c8f4a23a64b]# ll >> total [ tel:(309)%20698-7560 | 13096987560 ] >> -rw-rw. 1 36 36 13149448896512 Nov 13 13:42 >> 5974fd33-af4c-4e3b-aadb-bece6054eb6b >> -rw-rw. 1 36 36 1048576 Nov 13 19:34 >> 5974fd33-af4c-4e3b-aadb-bece6054eb6b.lease >> -rw-r--r--. 1 36 36 262 Nov 13 19:54 >> 5974fd33-af4c-4e3b-aadb-bece6054eb6b.meta >> -rw-rw. 1 36 36 2147483648000 Jul 8 2016 >> 723ad5aa-02f6-4067-ac75-0ce0a761627f >> -rw-rw. 1 36 36 1048576 Jul 7 2016 >> 723ad5aa-02f6-4067-ac75-0ce0a761627f.lease >> -rw-r--r--. 1 36 36 335 Nov 13 19:52 >> 723ad5aa-02f6-4067-ac75-0ce0a761627f.meta >> qemu-img snapshot -l 5974fd33-af4c-4e3b-aadb-bece6054eb6b >> (nothing) >> Because it is a very big (13 TB) disk I can't migrate to an another image, >> because I don't have enough free space. So I just would like to use it in >> ovirt >> like in the past. >> I have a very old ovirt (3.5) >> How can I use this disk? >> Thanks in advance, >> Regards, >> Tibor >> ___ >> Users mailing list >> [ mailto:Users@ovirt.org | Users@ovirt.org ] >> [ http://lists.ovirt.org/mailman/listinfo/users | >> http://lists.ovirt.org/mailman/listinfo/users ] ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Snapshot or not?
Hi Somebody please? T. - 2017. nov.. 15., 7:20, Demeter Tibor <tdeme...@itsmart.hu> írta: > Hi, > Can somebody help me? > Thanks. > T. > - 2017. nov.. 13., 21:36, Demeter Tibor <tdeme...@itsmart.hu> írta: >> Dear Users, >> I have a disk of a vm, that is have a snapshot. It is very interesting, >> because >> there are two other disk of that VM, but there are no snapshots of them. >> I found this while I've try to migrate a storage-domain between two >> datacenter. >> Because, I didn't import that vm from the storage domain, I did an another >> similar VM with exactly same sized thin-provisioned disks. I have renamed, >> copied to here my originals. >> The VM started successfully, but the disk that contain a snapshot did not >> recognized by the os. I can see the whole disk as raw. (disk id, format in >> ovirt, filenames of images, etc) . I think ovirt don't know that is a >> snapshotted image and use as raw. Is it possible? >> I don't see any snapshot in snapshots. Also I have try to list snapshots with >> qemu-img info and qemu-img snapshot -l , but it does not see any snapshots in >> the image. >> Really, I don't know how is possible this. >> [root@storage1 8d815282-6957-41c0-bb3e-6c8f4a23a64b]# qemu-img info >> 5974fd33-af4c-4e3b-aadb-bece6054eb6b >> image: 5974fd33-af4c-4e3b-aadb-bece6054eb6b >> file format: qcow2 >> virtual size: 13T (13958643712000 bytes) >> disk size: 12T >> cluster_size: 65536 >> backing file: >> ../8d815282-6957-41c0-bb3e-6c8f4a23a64b/723ad5aa-02f6-4067-ac75-0ce0a761627f >> backing file format: raw >> Format specific information: >> compat: 0.10 >> [root@storage1 8d815282-6957-41c0-bb3e-6c8f4a23a64b]# qemu-img info >> 723ad5aa-02f6-4067-ac75-0ce0a761627f >> image: 723ad5aa-02f6-4067-ac75-0ce0a761627f >> file format: raw >> virtual size: 2.0T (2147483648000 bytes) >> disk size: 244G >> [root@storage1 8d815282-6957-41c0-bb3e-6c8f4a23a64b]# ll >> total 13096987560 >> -rw-rw. 1 36 36 13149448896512 Nov 13 13:42 >> 5974fd33-af4c-4e3b-aadb-bece6054eb6b >> -rw-rw. 1 36 36 1048576 Nov 13 19:34 >> 5974fd33-af4c-4e3b-aadb-bece6054eb6b.lease >> -rw-r--r--. 1 36 36 262 Nov 13 19:54 >> 5974fd33-af4c-4e3b-aadb-bece6054eb6b.meta >> -rw-rw. 1 36 36 2147483648000 Jul 8 2016 >> 723ad5aa-02f6-4067-ac75-0ce0a761627f >> -rw-rw. 1 36 36 1048576 Jul 7 2016 >> 723ad5aa-02f6-4067-ac75-0ce0a761627f.lease >> -rw-r--r--. 1 36 36 335 Nov 13 19:52 >> 723ad5aa-02f6-4067-ac75-0ce0a761627f.meta >> qemu-img snapshot -l 5974fd33-af4c-4e3b-aadb-bece6054eb6b >> (nothing) >> Because it is a very big (13 TB) disk I can't migrate to an another image, >> because I don't have enough free space. So I just would like to use it in >> ovirt >> like in the past. >> I have a very old ovirt (3.5) >> How can I use this disk? >> Thanks in advance, >> Regards, >> Tibor >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Snapshot or not?
Hi, Can somebody help me? Thanks. T. - 2017. nov.. 13., 21:36, Demeter Tibor <tdeme...@itsmart.hu> írta: > Dear Users, > I have a disk of a vm, that is have a snapshot. It is very interesting, > because > there are two other disk of that VM, but there are no snapshots of them. > I found this while I've try to migrate a storage-domain between two > datacenter. > Because, I didn't import that vm from the storage domain, I did an another > similar VM with exactly same sized thin-provisioned disks. I have renamed, > copied to here my originals. > The VM started successfully, but the disk that contain a snapshot did not > recognized by the os. I can see the whole disk as raw. (disk id, format in > ovirt, filenames of images, etc) . I think ovirt don't know that is a > snapshotted image and use as raw. Is it possible? > I don't see any snapshot in snapshots. Also I have try to list snapshots with > qemu-img info and qemu-img snapshot -l , but it does not see any snapshots in > the image. > Really, I don't know how is possible this. > [root@storage1 8d815282-6957-41c0-bb3e-6c8f4a23a64b]# qemu-img info > 5974fd33-af4c-4e3b-aadb-bece6054eb6b > image: 5974fd33-af4c-4e3b-aadb-bece6054eb6b > file format: qcow2 > virtual size: 13T (13958643712000 bytes) > disk size: 12T > cluster_size: 65536 > backing file: > ../8d815282-6957-41c0-bb3e-6c8f4a23a64b/723ad5aa-02f6-4067-ac75-0ce0a761627f > backing file format: raw > Format specific information: > compat: 0.10 > [root@storage1 8d815282-6957-41c0-bb3e-6c8f4a23a64b]# qemu-img info > 723ad5aa-02f6-4067-ac75-0ce0a761627f > image: 723ad5aa-02f6-4067-ac75-0ce0a761627f > file format: raw > virtual size: 2.0T (2147483648000 bytes) > disk size: 244G > [root@storage1 8d815282-6957-41c0-bb3e-6c8f4a23a64b]# ll > total 13096987560 > -rw-rw. 1 36 36 13149448896512 Nov 13 13:42 > 5974fd33-af4c-4e3b-aadb-bece6054eb6b > -rw-rw. 1 36 36 1048576 Nov 13 19:34 > 5974fd33-af4c-4e3b-aadb-bece6054eb6b.lease > -rw-r--r--. 1 36 36 262 Nov 13 19:54 5974fd33-af4c-4e3b-aadb-bece6054eb6b.meta > -rw-rw. 1 36 36 2147483648000 Jul 8 2016 > 723ad5aa-02f6-4067-ac75-0ce0a761627f > -rw-rw. 1 36 36 1048576 Jul 7 2016 > 723ad5aa-02f6-4067-ac75-0ce0a761627f.lease > -rw-r--r--. 1 36 36 335 Nov 13 19:52 723ad5aa-02f6-4067-ac75-0ce0a761627f.meta > qemu-img snapshot -l 5974fd33-af4c-4e3b-aadb-bece6054eb6b > (nothing) > Because it is a very big (13 TB) disk I can't migrate to an another image, > because I don't have enough free space. So I just would like to use it in > ovirt > like in the past. > I have a very old ovirt (3.5) > How can I use this disk? > Thanks in advance, > Regards, > Tibor > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Snapshot or not?
Dear Users, I have a disk of a vm, that is have a snapshot. It is very interesting, because there are two other disk of that VM, but there are no snapshots of them. I found this while I've try to migrate a storage-domain between two datacenter. Because, I didn't import that vm from the storage domain, I did an another similar VM with exactly same sized thin-provisioned disks. I have renamed, copied to here my originals. The VM started successfully, but the disk that contain a snapshot did not recognized by the os. I can see the whole disk as raw. (disk id, format in ovirt, filenames of images, etc) . I think ovirt don't know that is a snapshotted image and use as raw. Is it possible? I don't see any snapshot in snapshots. Also I have try to list snapshots with qemu-img info and qemu-img snapshot -l , but it does not see any snapshots in the image. Really, I don't know how is possible this. [root@storage1 8d815282-6957-41c0-bb3e-6c8f4a23a64b]# qemu-img info 5974fd33-af4c-4e3b-aadb-bece6054eb6b image: 5974fd33-af4c-4e3b-aadb-bece6054eb6b file format: qcow2 virtual size: 13T (13958643712000 bytes) disk size: 12T cluster_size: 65536 backing file: ../8d815282-6957-41c0-bb3e-6c8f4a23a64b/723ad5aa-02f6-4067-ac75-0ce0a761627f backing file format: raw Format specific information: compat: 0.10 [root@storage1 8d815282-6957-41c0-bb3e-6c8f4a23a64b]# qemu-img info 723ad5aa-02f6-4067-ac75-0ce0a761627f image: 723ad5aa-02f6-4067-ac75-0ce0a761627f file format: raw virtual size: 2.0T (2147483648000 bytes) disk size: 244G [root@storage1 8d815282-6957-41c0-bb3e-6c8f4a23a64b]# ll total 13096987560 -rw-rw. 1 36 36 13149448896512 Nov 13 13:42 5974fd33-af4c-4e3b-aadb-bece6054eb6b -rw-rw. 1 36 36 1048576 Nov 13 19:34 5974fd33-af4c-4e3b-aadb-bece6054eb6b.lease -rw-r--r--. 1 36 36 262 Nov 13 19:54 5974fd33-af4c-4e3b-aadb-bece6054eb6b.meta -rw-rw. 1 36 36 2147483648000 Jul 8 2016 723ad5aa-02f6-4067-ac75-0ce0a761627f -rw-rw. 1 36 36 1048576 Jul 7 2016 723ad5aa-02f6-4067-ac75-0ce0a761627f.lease -rw-r--r--. 1 36 36 335 Nov 13 19:52 723ad5aa-02f6-4067-ac75-0ce0a761627f.meta qemu-img snapshot -l 5974fd33-af4c-4e3b-aadb-bece6054eb6b (nothing) Because it is a very big (13 TB) disk I can't migrate to an another image, because I don't have enough free space. So I just would like to use it in ovirt like in the past. I have a very old ovirt (3.5) How can I use this disk? Thanks in advance, Regards, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Hosted engine setup question
Dear Charles, Thank you for your reply. I don't want to make an another storage domain, I just want to do a detach-attach procedure with the existing. Also, I have an another question. Is it possible delete snapshots in 4.1 what were created in 3.5? How is safe this? I have some vm snapshot in the old system, but I don't want more outage with deleting them.The 3.5 does not support the live snapshot deleting, but the 4.1 yes. Thanks, Tibor - 2017. okt.. 2., 19:55, Charles Kozler <ckozler...@gmail.com> írta: > I did a 3.6 to 4.1 like this. I moved all of my VMs to a new storage domain > (the > other was hyperconverged gluster) and then took a full outage, shut down all > of > my VMs, detached from 3.6, and imported on 4.1. I had no issues other than > expected mac address changes, but I think you can manually override this in > the > engine somewhere > If you are worried, do it with one VM. Create a new storage domain that both > clusters can "see", move one VM to the domain on 3.6, detach, and import to > 3.1. Bring the VM up > If it is Linux VM's older than systemd and using sysvinit, you will hit issues > where your MAC address will change and udev will move it to eth# wherever # is > the next available NIC in your VM host > On Mon, Oct 2, 2017 at 12:54 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu > | > tdeme...@itsmart.hu ] > wrote: >> Hi, >> Can anyone answer my questions? >> Thanks in advance, >> R, >> Tibor >> - 2017. szept.. 19., 8:31, Demeter Tibor < [ mailto:tdeme...@itsmart.hu | >> tdeme...@itsmart.hu ] > írta: >>> - I have a productive ovirt cluster based on 3.5 series. This using a >>> shared nfs >>> storage. Is it possible to migrate VMs from 3.5 to 4.1 with detach shared >>> storage from the old cluster and attach it to the new cluster? >>> - If yes what will happend with the VM properies? For example mac addresses, >>> limits, etc. Those will be migrated or not? >>> Thanks in advance, >>> Regard >>> Tibor >>> ___ >>> Users mailing list >>> [ mailto:Users@ovirt.org | Users@ovirt.org ] >>> [ http://lists.ovirt.org/mailman/listinfo/users | >>> http://lists.ovirt.org/mailman/listinfo/users ] >> ___ >> Users mailing list >> [ mailto:Users@ovirt.org | Users@ovirt.org ] >> [ http://lists.ovirt.org/mailman/listinfo/users | >> http://lists.ovirt.org/mailman/listinfo/users ] ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Hosted engine setup question
Hi, Can anyone answer my questions? Thanks in advance, R, Tibor - 2017. szept.. 19., 8:31, Demeter Tibor <tdeme...@itsmart.hu> írta: > - I have a productive ovirt cluster based on 3.5 series. This using a shared > nfs > storage. Is it possible to migrate VMs from 3.5 to 4.1 with detach shared > storage from the old cluster and attach it to the new cluster? > - If yes what will happend with the VM properies? For example mac addresses, > limits, etc. Those will be migrated or not? > Thanks in advance, > Regard > Tibor > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Impossible to add other host to hosted engine's cluster
Hi, I've created a 3 host based hosted engine. I can't add other hosts to hosted engine's cluster. Before the setup, I have created a 3 node glusterfs for hosted engine on them. Because I would like use and separate vlans, I created two vlan bridge on all host. First is for ovirtmgmt, and a second for glusterfs. The hosted engine setup was successful but when I try to add other hosts, that is does not work, because vdsmd could not started. I found some network related errors in the logs: restore-net::ERROR::2017-09-19 19:14:48,072::__init__::51::root::(__exit__) Failed rollback transaction last known good network. Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/network/netswitch.py", line 150, in _setup_legacy in_rollback) File "/usr/lib/python2.7/site-packages/vdsm/network/legacy_switch.py", line 523, in bonds_setup _bonds_remove(remove, configurator, _netinfo, in_rollback) File "/usr/lib/python2.7/site-packages/vdsm/network/legacy_switch.py", line 548, in _bonds_remove if _is_bond_valid_for_removal(name, _netinfo, in_rollback): File "/usr/lib/python2.7/site-packages/vdsm/network/legacy_switch.py", line 573, in _is_bond_valid_for_removal 'interfaces %s' % (bond, bond_users)) ConfigNetworkError: (31, "Cannot remove bonding bond0: used by another interfaces set(['bond0.105', 'bond0.104'])") restore-net::ERROR::2017-09-19 19:14:48,073::vdsm-restore-net-config::478::root::(restore) unified restoration failed. Traceback (most recent call last): File "/usr/share/vdsm/vdsm-restore-net-config", line 473, in restore unified_restoration() File "/usr/share/vdsm/vdsm-restore-net-config", line 123, in unified_restoration _remove_networks_in_running_config() File "/usr/share/vdsm/vdsm-restore-net-config", line 238, in _remove_networks_in_running_config '_inRollback': True}) File "/usr/lib/python2.7/site-packages/vdsm/network/api.py", line 218, in setupNetworks _setup_networks(networks, bondings, options) File "/usr/lib/python2.7/site-packages/vdsm/network/api.py", line 239, in _setup_networks netswitch.setup(networks, bondings, options, in_rollback) File "/usr/lib/python2.7/site-packages/vdsm/network/netswitch.py", line 132, in setup _setup_legacy(legacy_nets, legacy_bonds, options, in_rollback) File "/usr/lib/python2.7/site-packages/vdsm/network/netswitch.py", line 150, in _setup_legacy in_rollback) File "/usr/lib/python2.7/site-packages/vdsm/network/legacy_switch.py", line 523, in bonds_setup _bonds_remove(remove, configurator, _netinfo, in_rollback) File "/usr/lib/python2.7/site-packages/vdsm/network/legacy_switch.py", line 548, in _bonds_remove if _is_bond_valid_for_removal(name, _netinfo, in_rollback): File "/usr/lib/python2.7/site-packages/vdsm/network/legacy_switch.py", line 573, in _is_bond_valid_for_removal 'interfaces %s' % (bond, bond_users)) ConfigNetworkError: (31, "Cannot remove bonding bond0: used by another interfaces set(['bond0.105', 'bond0.104'])") The four host network config is same, the ovirtmgmt bond.104 is the default route. How can I add another host to cluster? Üdvözlettel: Demeter Tibor E-mail: tdemeter @itsmart.hu Mobil: [ callto:+36 30 3777122 | +36 30 ] 4620500 Web: [ http://itsmart.hu/ | www.itsmart.hu ] [ http://itsmart.hu/ ] ItSmart Informatikai Kft. 2120 Dunakeszi, Wass Albert U. 2. 1/9. Telefon: [ callto:+36 30 462 0500 | +36 30 462 0500 ] [EN] This message and any attachments are confidential and privileged and intended for the use of the addressee only. If you have received this communication in error, please notify the sender by replay e-mail and delete this message from your system. Please note that Internet e-mail guarantees neither the confidentiality nor the proper receipt of the message sent. The data deriving from our correspondence with you are included in a file of ITSMART Ltd which exclusive purpose is to manage the communications of the company; under the understanding that, in maintaining said correspondence, you authorize the treatment of such data for the mentioned purpose. You are entitled to exercise your rights of access, rectification, cancellation and opposition by addressing such written application to address above. [HUN] Ez az üzenet és annak bármely csatolt anyaga bizalmas, a nyilvános közléstol védett, kizárólag a címzett használhatja fel. Ha Ön nem az üzenet címzettje, úgy kérjük válaszüzenetben értesítse errol a feladót és törölje az üzenetet a rendszerbol. Kérjük vegye figyelembe, hogy az email-en történo információtovábbítás kockázattal járhat, nem garantálja sem a csatorna bizalmasságát, sem a kézbesítést. A levél az ITSMART Informatikai Kft. kommunikációjának eszköze, az adatokat kizárólag erre a cé
[ovirt-users] Hosted engine setup question
Hi, I just installed a hosted engine based four nodes cluster to glustered storage. It seems to working fine, but I have some question about it. - I would like to make an own cluster and datacenter. Is it possible to remove a host and re-add to an another cluster while it is running the hosted engine? - Is it possible to remove default datacenter without any problems? - I have a productive ovirt cluter that is based on 3.5 series. It is using a shared nfs storage. Is it possible to migrate VMs from 3.5 to 4.1 with detach shared storage from the old cluster and attach it to the new cluster? - If yes what will happend with the VM properies? For example mac addresses, limits, etc. Those will be migrated or not? Thanks in advance, Regard Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] CBT question
Dear Yaniv, Thank you for your reply. I have to backup ~35 VM those used around 7 TB disk. Could you show me an usable solution/script/software for backup these VMs? I don't want to backup fulls in everyday because it takes too long time and space... Thanks in advance, R Tibor - 2017. szept.. 11., 16:14, Yaniv Kaul <yk...@redhat.com> írta: > On Mon, Sep 11, 2017 at 4:17 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu > | > tdeme...@itsmart.hu ] > wrote: >> Dear Listmembers, >> Somebody know when will be available the CBT (changed block tracking) >> feature in >> ovirt/rhev? > It has to be implemented first in QEMU - where it is still being worked on. > We plan to take advantage of it after it is ready in QEMU (and libvirt of > course). >> We looking for an usable backup solution for our ovirt guests, but I've see, >> there are some API limitation yet. > But nevertheless there are various backup solutions that can be used today, > even > if not as efficient as CBT. > Y. >> Thanks in advance, >> R >> Tibor >> ___ >> Users mailing list >> [ mailto:Users@ovirt.org | Users@ovirt.org ] >> [ http://lists.ovirt.org/mailman/listinfo/users | >> http://lists.ovirt.org/mailman/listinfo/users ] ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] CBT question
Dear Listmembers, Somebody know when will be available the CBT (changed block tracking) feature in ovirt/rhev? We looking for an usable backup solution for our ovirt guests, but I've see, there are some API limitation yet. Thanks in advance, R Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt 3.5.5 to 4.x
Hi, Thank you for your reply. I have a short plan for the migration, but I have some question about it. Please correct me if something wrong. - I will install ovirt nodes to the new machines. - I would like to use same storage, so i will make an new NFS export for the new ovirt-engine. - I will make hosted engine setup that will placed on the new nfs share. - I want to come some new features , like vlans and new IP range for engine, management, etc, so I will make these settings on the new setup - This is the point where I will stop the whole old system. I have to stop VM-s, disconnect storge from old cluster and I will attach to the new cluster. - This is the point, where I'm not sure in all things. If I had attach to the new cluster, the VM-s will show on the new ovirt-engine? What about the settings for example, memory, cpu, etc? It will be came from storage? Or I have to recreate these settings on every VM-s? - Need I'm doing other things, or it will be enought to start vms in the new cluster? Thanks in advance. Regards, Tibor - 2016. nov.. 15., 16:45, Yaniv Dary <yd...@redhat.com> írta: > Yes, this is possible, since import storage domain exists since oVirt 3.5. > Doing a test is always advised due. > Yaniv Dary > Technical Product Manager > Red Hat Israel Ltd. > 34 Jerusalem Road > Building A, 4th floor > Ra'anana, Israel 4350109 > Tel : [ tel:%2B972%20%289%29%207692306 | +972 (9) 7692306 ] 8272306 > Email: [ mailto:yd...@redhat.com | yd...@redhat.com ] IRC : ydary > On Tue, Nov 15, 2016 at 4:37 PM, Demeter Tibor < [ mailto:tdeme...@itsmart.hu > | > tdeme...@itsmart.hu ] > wrote: >> Dear users, >> We have an ovirt cluster with three nodes and centralized storage.(nfs >> based). >> The clusters based on centos6 os. >> We bought some new server for more resources, but we want to upgrade to 4.0 >> . Is >> it possible to make brand new install and import all of VM-s from storage? >> The storage will be remain, so I just wondering, I will make a clean install >> and >> connect the storage to this cluster. >> Is it possible? >> We don't have users, or special settings on this cluster, but I don't want to >> make the difficult upgrade process from 3.5 to 4.x and centos 6 to 7. >> What is our possibilities? >> Thank in advance, >> Regards, >> Tibor. >> ___ >> Users mailing list >> [ mailto:Users@ovirt.org | Users@ovirt.org ] >> [ http://lists.ovirt.org/mailman/listinfo/users | >> http://lists.ovirt.org/mailman/listinfo/users ] ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Extract snapshot from an image
Hi, I have 3.5. I've found the clone button,that will create a new virtual machine. But I need the image from the storage. Is that will make an individual image, or the parent will be the orifiginal image file? Can I copy the cloned machine to an external HDD? Thanks Tibor - 2016. nov.. 15., 16:54, Gianluca Cecchi <gianluca.cec...@gmail.com> írta: > On Tue, Nov 15, 2016 at 4:43 PM, Yaniv Dary < [ mailto:yd...@redhat.com | > yd...@redhat.com ] > wrote: >> You can mount the snapshot to another VM and copy the image. >> We will be adding a image download option in oVirt 4.1. >> Yaniv Dary >> Technical Product Manager >> Red Hat Israel Ltd. >> 34 Jerusalem Road >> Building A, 4th floor >> Ra'anana, Israel 4350109 >> Tel : [ tel:%2B972%20%289%29%207692306 | +972 (9) 7692306 ] 8272306 >> Email: [ mailto:yd...@redhat.com | yd...@redhat.com ] IRC : ydary >> On Tue, Nov 15, 2016 at 4:29 PM, Demeter Tibor < [ >> mailto:tdeme...@itsmart.hu | >> tdeme...@itsmart.hu ] > wrote: >>> Dear All, >>> I have a running vm that have a snapshot. It was made until the machine was >>> stopped. This snapshot is a consistent backup of the whole vm. >>> Is it possible to extract the snapshot from the running vm's image? I have >>> try >>> the qemu-img, but I didn't found similar function. >>> I need the snapshot version of machine, but I don't want to revert. >>> Thanks in advance, >>> Regards, >>> Tibor > Hello, > in 4.0.5 if you select "Virtual Machines" tab and then "Snapshots" subtab you > can do clone of the snapshot into a new VM: > [ > https://drive.google.com/file/d/0BwoPbcrMv8mvRjJUSEhMM3dveG8/view?usp=sharing > | > https://drive.google.com/file/d/0BwoPbcrMv8mvRjJUSEhMM3dveG8/view?usp=sharing > ] > I tried and it worked. > Or did you mean anything different? > You can't do it on the "Current" line (the Active VM) but if the VM is stopped > you can instead do a "Clone VM" from the VM line > Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] ovirt 3.5.5 to 4.x
Dear users, We have an ovirt cluster with three nodes and centralized storage.(nfs based). The clusters based on centos6 os. We bought some new server for more resources, but we want to upgrade to 4.0 . Is it possible to make brand new install and import all of VM-s from storage? The storage will be remain, so I just wondering, I will make a clean install and connect the storage to this cluster. Is it possible? We don't have users, or special settings on this cluster, but I don't want to make the difficult upgrade process from 3.5 to 4.x and centos 6 to 7. What is our possibilities? Thank in advance, Regards, Tibor. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Extract snapshot from an image
Dear All, I have a running vm that have a snapshot. It was made until the machine was stopped. This snapshot is a consistent backup of the whole vm. Is it possible to extract the snapshot from the running vm's image? I have try the qemu-img, but I didn't found similar function. I need the snapshot version of machine, but I don't want to revert. Thanks in advance, Regards, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] 3.5.6 to 4.0
Hi, - 2016. júl.. 14., 10:09, Yedidyah Bar David d...@redhat.com írta: > On Thu, Jul 14, 2016 at 10:38 AM, Demeter Tibor <tdeme...@itsmart.hu> wrote: >> >> Dear members! >> >> We have an ovirt cluster that based on el6 and 3.5.6 >> It is contain three nodes, but the first node is an all-in-one installation. >> I would like to upgrade the whole system to 4.0. Also I would like to switch >> to hosted engine modell. > > Sounds like a combination of: > > [1] > http://www.ovirt.org/develop/developer-guide/engine/migrate-to-hosted-engine/ > [2] https://www.ovirt.org/documentation/how-to/hosted-engine-host-OS-upgrade/ > [3] > https://www.ovirt.org/documentation/how-to/hosted-engine/#upgrade-hosted-engine > >> Now, we bought new servers for the migration. > > "For the migration", meaning you intend to eventually migrate to them? > And decommission the existing ones? :) No, it was an old plan. So we bought them because we want to switch to ultra-dense multipurpose servers from individual servers. > > Also, I assume you want el7 on all hosts eventually. > > Storage remains as-is? The storage is NFS based storgae. > > How important is no downtime for the VMs? We could makes downtime if that needed. > >> >> What is the good way to migrate nodes, etc? > > Something like: > 1. Create new storage space for the hosted-engine > 2. Install el7 on one of the new hosts, NH1 > 3. deploy hosted-engine on NH1 Have I add the old IP to this engine? Because it same with the node. Also, I would like to switch to VLANs with the migration, if possible. I don't know when I need to make this, after or under the migration process.. > Follow [1]: > - backup existing engine and stop/disable engine there > - restore backup on the engine vm (after you install engine, > but do not engine-setup) > - engine-setup > - When 'hosted-engine --deploy' will try to add the host to > the engine, it might fail, because it will add it to Default > cluster, which has el6 hosts. Check [2] about this - create > new cluster and add there. > - All of the above in 3.5. How can I install 3.5 and not 4.0 from repositories? > 4. Perhaps add the other new hosts, perhaps as hosted-engine > hosts - if you want HA for the engine vm > 5. Migrate all VMs to the new cluster. > 6. Delete old hosts > 7. Upgrade to 3.6 - check [2] > 8. Upgrade to 4.0 - should be normal procedure [3] > > I recommend testing this on test systems prior to prod. > You can use nested kvm for this. > > Best, > -- > Didi Thank you Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] 3.5.6 to 4.0
Dear members! We have an ovirt cluster that based on el6 and 3.5.6 It is contain three nodes, but the first node is an all-in-one installation. I would like to upgrade the whole system to 4.0. Also I would like to switch to hosted engine modell. Now, we bought new servers for the migration. What is the good way to migrate nodes, etc? Thanks in advance Regards,Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] strange iscsi issue
Hi, Thank you for your reply. I'm sorry but I don't think so. This storage is fast, because it is a SSD based storage, and I can read/write to it with fast performance. I know, in virtual environment the I/O always slowest than on physical, but here I have a very large difference. Also, I use ext4 FS. Thanks Tibor - 2015. szept.. 8., 0:40, Alex McWhirter alexmcwhir...@triadic.us írta: > Unless you're using a caching filesystem like zfs, then you're going to be > limited by how fast your storage back end can actually right to disk. Unless > you have a quite large storage back end, 10gbe is probably faster than your > disks can read and write. > > On Sep 7, 2015 4:26 PM, Demeter Tibor <tdeme...@itsmart.hu> wrote: >> >> Hi All, >> >> I have to create a test environment for testing purposes, because we need to >> testing our new 10gbe infrastructure. >> One server that have a 10gbe nic - this is the vdsm host and ovirt portal. >> One server that have a 10gbe nic - this is the storage. >> >> Its connected to each other throught a dlink 10gbe switch. >> >> Everything good and nice, the server can connect to storage, I can make and >> run >> VMs, but the storage performance from inside VM seems to be 1Gb/sec only. >> I did try the iperf command for testing connections beetwen servers, and it >> was >> 9.40 GB/sec. I have try to use hdparm -tT /dev/mapper/iscsidevice and also it >> was 400-450 MB/sec. I've got same result on storage server. >> >> So: >> >> - hdparm test on local storage ~ 400 mb/sec >> - hdparm test on ovirt node server through attached iscsi device ~ 400 Mb/sec >> - hdparm test from inside vm on local virtual disk - 93-102 Mb /sec >> >> The question is : Why? >> >> ps. I Have only one ovirtmgmt device, so there are no other networks. The >> router >> is only 1gbe/sec, but i've tested and the traffic does not going through >> this. >> >> Thanks in advance, >> >> Regards, > > Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] strange iscsi issue
Hi All, I have to create a test environment for testing purposes, because we need to testing our new 10gbe infrastructure. One server that have a 10gbe nic - this is the vdsm host and ovirt portal. One server that have a 10gbe nic - this is the storage. Its connected to each other throught a dlink 10gbe switch. Everything good and nice, the server can connect to storage, I can make and run VMs, but the storage performance from inside VM seems to be 1Gb/sec only. I did try the iperf command for testing connections beetwen servers, and it was 9.40 GB/sec. I have try to use hdparm -tT /dev/mapper/iscsidevice and also it was 400-450 MB/sec. I've got same result on storage server. So: - hdparm test on local storage ~ 400 mb/sec - hdparm test on ovirt node server through attached iscsi device ~ 400 Mb/sec - hdparm test from inside vm on local virtual disk - 93-102 Mb /sec The question is : Why? ps. I Have only one ovirtmgmt device, so there are no other networks. The router is only 1gbe/sec, but i've tested and the traffic does not going through this. Thanks in advance, Regards, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] live migration
Hi, what is the last recommended version of qemu-kvm-rhev,libvirt and vdsm packages? Can I upgrade them by hand? Thanks, Tibor - 2015. aug.. 18., 13:55, Yaniv Dary yd...@redhat.com írta: Yaniv Dary Technical Product Manager Red Hat Israel Ltd. 34 Jerusalem Road Building A, 4th floor Ra'anana, Israel 4350109 Tel : +972 (9) 7692306 8272306 Email: yd...@redhat.com IRC : ydary On Tue, Aug 18, 2015 at 7:48 AM, Demeter Tibor tdeme...@itsmart.hu wrote: Hi, Every host are different hostnames, it does not change since reinstall. Maybe node1 got diffrerent uuid than before. Ovirt had out-of-box live migration feature yet? Yes. Should work. Thanks. Tibor - 2015. aug.. 17., 10:07, Matthew Lagoe matthew.la...@subrigo.net írta: Are all the hostnames of the machines different ive had it before where migrations fail because they have the same hostname or uuid for that matter From: users-boun...@ovirt.org [mailto: users-boun...@ovirt.org ] On Behalf Of Omer Frenkel Sent: Monday, August 17, 2015 01:02 AM To: Demeter Tibor Cc: users Subject: Re: [ovirt-users] live migration On Sun, Aug 16, 2015 at 10:31 PM, Demeter Tibor tdeme...@itsmart.hu wrote: Hi, I reinstalled one of my nodes (node1) because I have to replace my hdds. I installed centos 6.6 minimal, but on node re-adding procecure it installed newer qemu-kvm-rhev packages. Since reinstall I can run VMs on this node and I can do live migrate from this node to other, but not backwards. I remember, maybe one years ago it was required to install redhat's version of qemu-kvm-rhve package for this feature. Is it necessary yet? my versions: node0 KVM: 0.12.1.2 - 2.415.el6_5.14, LIBVIRT: libvirt-0.10.2-46.el6_6.1 node1 KVM: 0.12.1.2 - 2.448.el6_6.4, LIBVIRT: libvirt-0.10.2-54.el6 node2 KVM: 0.12.1.2 - 2.448.el6_6.4, LIBVIRT: libvirt-0.10.2-46.el6_6.1 Can I upgrade manual these hosts? I haven't restart my hosts because node0 and node2 is gluster replicate. Thanks in advance, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users not sure about the versions, but what is the error you see in source host vdsm.log when migration fails? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] upgrade issues
Also, I've removed the /var/lib/glusterd/* (except gluster.info) on node1, it was the root cause of the whole event in ovirt. Hi, 1, r710cluster is contain node0,node1,node2. 2, I'm sorry, supervdsm.log wasn't attached. what nodes on are need to know it? 3, it was on node0 [root@node1 ~]# gluster peer status Number of Peers: 1 Hostname: 172.16.0.12 Uuid: 0ccdaa63-758a-43a4-93f2-25214a3cfa12 State: Accepted peer request (Connected) [root@node1 ~]# gluster volume info No volumes present :( After this I did it on node2 [root@node2 ~]# gluster peer status Number of Peers: 2 Hostname: 172.16.0.10 Uuid: 664273d9-a77f-476d-ad09-3e126c4b19a7 State: Peer in Cluster (Connected) Hostname: 172.16.0.11 Uuid: dc7a1611-f653-4d64-a426-b5ef589de289 State: Accepted peer request (Connected) [root@node2 ~]# gluster volume info Volume Name: g2sata Type: Replicate Volume ID: 49d76fc8-853e-4c7d-82a5-b12ec98dadd8 Status: Started Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: 172.16.0.10:/data/sata/brick2 Brick2: 172.16.0.12:/data/sata/brick2 Options Reconfigured: nfs.disable: on user.cifs: disable auth.allow: 172.16.* storage.owner-uid: 36 storage.owner-gid: 36 Volume Name: g4sata Type: Replicate Volume ID: f26ed231-c951-431f-8a2f-e8818b58cfb4 Status: Started Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: 172.16.0.10:/data/sata/iso Brick2: 172.16.0.12:/data/sata/iso Options Reconfigured: nfs.disable: off user.cifs: disable auth.allow: 172.16.0.* storage.owner-uid: 36 storage.owner-gid: 36 Many thanks, Tibor - 2015. aug.. 17., 16:03, Sahina Bose sab...@redhat.com írta: From the engine.log - the gluster volumes are queried on host node1 which returns no volumes. 1. Your cluster r710cluster1 - which nodes are added to it? node1 alone or node0 and node2 as well? 2. Was the attached supervdsm.log from node1? 3. Which node was the below gluster volume info output from? What is the output of gluster peer status and gluster volume info on node1? On 08/17/2015 12:49 PM, Demeter Tibor wrote: Dear Sahina, Thank you for your reply. Volume Name: g2sata Type: Replicate Volume ID: 49d76fc8-853e-4c7d-82a5-b12ec98dadd8 Status: Started Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: 172.16.0.10:/data/sata/brick2 Brick2: 172.16.0.12:/data/sata/brick2 Options Reconfigured: nfs.disable: on user.cifs: disable auth.allow: 172.16.* storage.owner-uid: 36 storage.owner-gid: 36 Volume Name: g4sata Type: Replicate Volume ID: f26ed231-c951-431f-8a2f-e8818b58cfb4 Status: Started Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: 172.16.0.10:/data/sata/iso Brick2: 172.16.0.12:/data/sata/iso Options Reconfigured: nfs.disable: off user.cifs: disable auth.allow: 172.16.0.* storage.owner-uid: 36 storage.owner-gid: 36 Also, I have attached the logs . Thanks in advance, Tibor - 2015. aug.. 17., 8:40, Sahina Bose sab...@redhat.com írta: Please provide output of gluster volume info command, vdsm.log engine.log There could be a mismatch between node information in engine database and gluster - one of the reasons is because the gluster server uuid changed on the node and we will need to see why. On 08/17/2015 12:35 AM, Demeter Tibor wrote: Hi All, I have to upgrade ovirt 3.5.0 to 3.5.3. We have a 3 node system and we have a gluster replica beetwen 2 node of these 3 servers. I had gluster volume beetwen node0 and node2 But I wanted to do a new volume beetwen node1 and node2. It didn't work, it complety kill my node1, because glusterd does not stated.I always have to got always error: gluster peer rejected (related to node1). I followed this article http://www.gluster.org/community/documentation/index.php/Resolving_Peer_Rejected and it was good, my gluster service already worked, but ovirt got these errors Detected deletion of volume g2sata on cluster r710cluster1, and deleted it from engine DB. Detected deletion of volume g4sata on cluster r710cluster1, and deleted it from engine DB. And ovirt does not see my gluster volumes anymore. I've checked with gluster volume status and gluster volume heal g2sata info, it seems to be working, my VMs are ok. How can I reimport my lost volumes to ovirt? Thanks in advance, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] upgrade issues
Hi, 1, r710cluster is contain node0,node1,node2. 2, I'm sorry, supervdsm.log wasn't attached. what nodes on are need to know it? 3, it was on node0 [root@node1 ~]# gluster peer status Number of Peers: 1 Hostname: 172.16.0.12 Uuid: 0ccdaa63-758a-43a4-93f2-25214a3cfa12 State: Accepted peer request (Connected) [root@node1 ~]# gluster volume info No volumes present :( After this I did it on node2 [root@node2 ~]# gluster peer status Number of Peers: 2 Hostname: 172.16.0.10 Uuid: 664273d9-a77f-476d-ad09-3e126c4b19a7 State: Peer in Cluster (Connected) Hostname: 172.16.0.11 Uuid: dc7a1611-f653-4d64-a426-b5ef589de289 State: Accepted peer request (Connected) [root@node2 ~]# gluster volume info Volume Name: g2sata Type: Replicate Volume ID: 49d76fc8-853e-4c7d-82a5-b12ec98dadd8 Status: Started Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: 172.16.0.10:/data/sata/brick2 Brick2: 172.16.0.12:/data/sata/brick2 Options Reconfigured: nfs.disable: on user.cifs: disable auth.allow: 172.16.* storage.owner-uid: 36 storage.owner-gid: 36 Volume Name: g4sata Type: Replicate Volume ID: f26ed231-c951-431f-8a2f-e8818b58cfb4 Status: Started Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: 172.16.0.10:/data/sata/iso Brick2: 172.16.0.12:/data/sata/iso Options Reconfigured: nfs.disable: off user.cifs: disable auth.allow: 172.16.0.* storage.owner-uid: 36 storage.owner-gid: 36 Many thanks, Tibor - 2015. aug.. 17., 16:03, Sahina Bose sab...@redhat.com írta: From the engine.log - the gluster volumes are queried on host node1 which returns no volumes. 1. Your cluster r710cluster1 - which nodes are added to it? node1 alone or node0 and node2 as well? 2. Was the attached supervdsm.log from node1? 3. Which node was the below gluster volume info output from? What is the output of gluster peer status and gluster volume info on node1? On 08/17/2015 12:49 PM, Demeter Tibor wrote: Dear Sahina, Thank you for your reply. Volume Name: g2sata Type: Replicate Volume ID: 49d76fc8-853e-4c7d-82a5-b12ec98dadd8 Status: Started Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: 172.16.0.10:/data/sata/brick2 Brick2: 172.16.0.12:/data/sata/brick2 Options Reconfigured: nfs.disable: on user.cifs: disable auth.allow: 172.16.* storage.owner-uid: 36 storage.owner-gid: 36 Volume Name: g4sata Type: Replicate Volume ID: f26ed231-c951-431f-8a2f-e8818b58cfb4 Status: Started Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: 172.16.0.10:/data/sata/iso Brick2: 172.16.0.12:/data/sata/iso Options Reconfigured: nfs.disable: off user.cifs: disable auth.allow: 172.16.0.* storage.owner-uid: 36 storage.owner-gid: 36 Also, I have attached the logs . Thanks in advance, Tibor - 2015. aug.. 17., 8:40, Sahina Bose sab...@redhat.com írta: Please provide output of gluster volume info command, vdsm.log engine.log There could be a mismatch between node information in engine database and gluster - one of the reasons is because the gluster server uuid changed on the node and we will need to see why. On 08/17/2015 12:35 AM, Demeter Tibor wrote: Hi All, I have to upgrade ovirt 3.5.0 to 3.5.3. We have a 3 node system and we have a gluster replica beetwen 2 node of these 3 servers. I had gluster volume beetwen node0 and node2 But I wanted to do a new volume beetwen node1 and node2. It didn't work, it complety kill my node1, because glusterd does not stated.I always have to got always error: gluster peer rejected (related to node1). I followed this article http://www.gluster.org/community/documentation/index.php/Resolving_Peer_Rejected and it was good, my gluster service already worked, but ovirt got these errors Detected deletion of volume g2sata on cluster r710cluster1, and deleted it from engine DB. Detected deletion of volume g4sata on cluster r710cluster1, and deleted it from engine DB. And ovirt does not see my gluster volumes anymore. I've checked with gluster volume status and gluster volume heal g2sata info, it seems to be working, my VMs are ok. How can I reimport my lost volumes to ovirt? Thanks in advance, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] live migration
Hi, Every host are different hostnames, it does not change since reinstall. Maybe node1 got diffrerent uuid than before. Ovirt had out-of-box live migration feature yet? Thanks. Tibor - 2015. aug.. 17., 10:07, Matthew Lagoe matthew.la...@subrigo.net írta: Are all the hostnames of the machines different ive had it before where migrations fail because they have the same hostname or uuid for that matter From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Omer Frenkel Sent: Monday, August 17, 2015 01:02 AM To: Demeter Tibor Cc: users Subject: Re: [ovirt-users] live migration On Sun, Aug 16, 2015 at 10:31 PM, Demeter Tibor tdeme...@itsmart.hu wrote: Hi, I reinstalled one of my nodes (node1) because I have to replace my hdds. I installed centos 6.6 minimal, but on node re-adding procecure it installed newer qemu-kvm-rhev packages. Since reinstall I can run VMs on this node and I can do live migrate from this node to other, but not backwards. I remember, maybe one years ago it was required to install redhat's version of qemu-kvm-rhve package for this feature. Is it necessary yet? my versions: node0 KVM: 0.12.1.2 - 2.415.el6_5.14, LIBVIRT: libvirt-0.10.2-46.el6_6.1 node1 KVM: 0.12.1.2 - 2.448.el6_6.4, LIBVIRT: libvirt-0.10.2-54.el6 node2 KVM: 0.12.1.2 - 2.448.el6_6.4, LIBVIRT: libvirt-0.10.2-46.el6_6.1 Can I upgrade manual these hosts? I haven't restart my hosts because node0 and node2 is gluster replicate. Thanks in advance, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users not sure about the versions, but what is the error you see in source host vdsm.log when migration fails? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] live migration
Hi, I reinstalled one of my nodes (node1) because I have to replace my hdds. I installed centos 6.6 minimal, but on node re-adding procecure it installed newer qemu-kvm-rhev packages. Since reinstall I can run VMs on this node and I can do live migrate from this node to other, but not backwards. I remember, maybe one years ago it was required to install redhat's version of qemu-kvm-rhve package for this feature. Is it necessary yet? my versions: node0 KVM: 0.12.1.2 - 2.415.el6_5.14, LIBVIRT: libvirt-0.10.2-46.el6_6.1 node1 KVM: 0.12.1.2 - 2.448.el6_6.4, LIBVIRT: libvirt-0.10.2-54.el6 node2 KVM: 0.12.1.2 - 2.448.el6_6.4, LIBVIRT: libvirt-0.10.2-46.el6_6.1 Can I upgrade manual these hosts? I haven't restart my hosts because node0 and node2 is gluster replicate. Thanks in advance, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] upgrade issues
Hi All, I have to upgrade ovirt 3.5.0 to 3.5.3. We have a 3 node system and we have a gluster replica beetwen 2 node of these 3 servers. I had gluster volume beetwen node0 and node2 But I wanted to do a new volume beetwen node1 and node2. It didn't work, it complety kill my node1, because glusterd does not stated.I always have to got always error: gluster peer rejected (related to node1). I followed this article http://www.gluster.org/community/documentation/index.php/Resolving_Peer_Rejected and it was good, my gluster service already worked, but ovirt got these errors Detected deletion of volume g2sata on cluster r710cluster1, and deleted it from engine DB. Detected deletion of volume g4sata on cluster r710cluster1, and deleted it from engine DB. And ovirt does not see my gluster volumes anymore. I've checked with gluster volume status and gluster volume heal g2sata info, it seems to be working, my VMs are ok. How can I reimport my lost volumes to ovirt? Thanks in advance, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] change root password on hosts
Hi, Is it possible to change root password on ovirt hosts? What does happend if I changes this ? Thanks Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] VM got paused state after migration
Dear Listmembers, I have a 3 node ovirt system, it's based on self-host glusterfs. Today, I did a vm migration but it was unsuccessful. The vm got a paused state and it was unable to resume and it was impossible to switch off. Cause I killed it on the compute node, but it's remains as paused state. How can I switch to power-off state this machine? At this moment I can't power on this vm.:( In this case are there any friendly solution for the future? If I do a restart for vdsmd, that will cause other bad things? Thanks in advance. Regards, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VM got paused state after migration
Hi, I'm sorry, but i don't have real hosted engine. I have glusterfs on same nodes with vms, but i don't use hosted engine. Also, I've checked, the vm does not running on both servers. What do you think, if i restart the vdsmd, that will solve this problem? Thanks for fast reply, Tibor - 2015. júl.. 13., 16:52, Doron Fediuck dfedi...@redhat.com írta: On 13/07/15 17:02, Demeter Tibor wrote: Dear Listmembers, I have a 3 node ovirt system, it's based on self-host glusterfs. Today, I did a vm migration but it was unsuccessful. The vm got a paused state and it was unable to resume and it was impossible to switch off. Cause I killed it on the compute node, but it's remains as paused state. How can I switch to power-off state this machine? At this moment I can't power on this vm.:( In this case are there any friendly solution for the future? If I do a restart for vdsmd, that will cause other bad things? Thanks in advance. Regards, Tibor Hi Tibor, is the qemu process dead in both hosts? Can you run the below command on one of the hosts and provide the output- hosted-engine --vm-status ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Upgrade to 3.5.1
Hi, Is glusterfs 3.6 is neccessary for ovirt 3.5.1? I have 3.5.2 at this moment. 3.6 neccessary for upgade ? I'm worried what will happed with my gluster volumes after the upgrade... :( Plese help me. Also, how can I upgrade the nodes? Need i'm to a yum upgrade on the compute nodes? Thanks. Tibor - Eredeti üzenet - Hi, No, I have only one replica beetwen two nodes. The third node is only a host for vms and that using this replica. Thanks Tibor - Eredeti üzenet - On 01/22/2015 08:03 PM, Demeter Tibor wrote: Hello, I have an ovirt 3.5.0 cluster with three nodes and we using glusterfs for serving backend storage for VM-s. Glusterfs are on same servers with ovirt. We have Gluster 3.5.1 on all of nodes. How can I upgrade to ovirt 3.5.1 with new glusterfs? I don't want data inconsistency/data loss/split brains? Do you have a replica 3 volume setup across these 3 nodes? Glusterfs supports rolling upgrade for replica volumes. But there are some issues to upgrade from 3.5 to 3.6 versions (depending on version used) Adding gluster-users Pranith for recommended procedures. thanks sahina Need I update gluster version to the latest? How I need to upgrade the nodes ? Is there any whitepaper about this? Thanks in advance, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Upgrade to 3.5.1
Hi, No, I have only one replica beetwen two nodes. The third node is only a host for vms and that using this replica. Thanks Tibor - Eredeti üzenet - On 01/22/2015 08:03 PM, Demeter Tibor wrote: Hello, I have an ovirt 3.5.0 cluster with three nodes and we using glusterfs for serving backend storage for VM-s. Glusterfs are on same servers with ovirt. We have Gluster 3.5.1 on all of nodes. How can I upgrade to ovirt 3.5.1 with new glusterfs? I don't want data inconsistency/data loss/split brains? Do you have a replica 3 volume setup across these 3 nodes? Glusterfs supports rolling upgrade for replica volumes. But there are some issues to upgrade from 3.5 to 3.6 versions (depending on version used) Adding gluster-users Pranith for recommended procedures. thanks sahina Need I update gluster version to the latest? How I need to upgrade the nodes ? Is there any whitepaper about this? Thanks in advance, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Upgrade to 3.5.1
Hello, I have an ovirt 3.5.0 cluster with three nodes and we using glusterfs for serving backend storage for VM-s. Glusterfs are on same servers with ovirt. We have Gluster 3.5.1 on all of nodes. How can I upgrade to ovirt 3.5.1 with new glusterfs? I don't want data inconsistency/data loss/split brains? Need I update gluster version to the latest? How I need to upgrade the nodes ? Is there any whitepaper about this? Thanks in advance, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Access userportal
Hi, I would like to make a public redirect to ovirt userportal like https://foo.domain.com that redirect me to my ovirt userportal that running on internal network, with not public ip address (172.16.0.1), but I don't want to create access for administrator portal. Also, I would like to add a commercial SSL certification for this site. Could me help somebody how can I do it? Thanks in advance! Regards, Tibor Demeter ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] SPM host and snapshot deletion
Hi, I have an ovirt 3.5 with glusterfs and three nodes. centos 6.5 and glusterfs 3.5.2. When I do a snapshot deletion on stopped VM, then on the SPM host eats all of virtual memory and whit this kill all of running VMs that is running on SPM host. It is a very big problem because I need to delete a lot of snapshot. In this case I need to powereing off these VMs because there are no other options for stopping. I've try out the live migration, but in this case the live migration does not working. is it a know bug? Thanks in advance. Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] snapshot deletion problem
Hi, After a live VM storage movement process Ovirt has been created two snapshots. (I have two disks in vm) I have powered off and delete this snapshots. (It was long,long time) Before the process I had 830 GB of free spaces, but after deletion it hasn't freed up spaces, inversely, at this moment I have only 530 GB ! I checked the filesystem and I found, the VM disk images got an _MERGE versions. So it is duplicated. On the tasks remained two tasks. It is big problem for me because I have a lot of similara vm-s, and I don't have space enougth. I need to release this spaces . Also, the vm is working fine. How can I delete these extra files? Why doesn't delete the engine selfmade? Some info: [root@node2 c0e98725-bc7a-4066-98c8-a7a9bc054b06]# ls -al total 410061112 drwxr-xr-x. 2 vdsm kvm 8192 dec 17 20.04 . drwxr-xr-x. 28 vdsm kvm 8192 dec 16 21.01 .. -rw-rw. 2 vdsm kvm 214748364800 nov 29 20.48 b50f9e17-f44e-44e3-ab59-d9c9d8d6ac3d -rw-rw. 2 vdsm kvm 1048576 nov 29 19.31 b50f9e17-f44e-44e3-ab59-d9c9d8d6ac3d.lease -rw-r--r--. 2 vdsm kvm 264 nov 29 20.48 b50f9e17-f44e-44e3-ab59-d9c9d8d6ac3d.meta -rw-rw. 2 vdsm kvm 25146425344 dec 18 06.49 e71c2b62-261b-462a-813d-2dc362f32124 -rw-rw. 2 vdsm kvm 1048576 nov 29 19.31 e71c2b62-261b-462a-813d-2dc362f32124.lease -rw-rw. 2 vdsm kvm 214748364800 dec 18 07.28 e71c2b62-261b-462a-813d-2dc362f32124_MERGE -rw-rw. 2 vdsm kvm 1048576 dec 17 20.04 e71c2b62-261b-462a-813d-2dc362f32124_MERGE.lease -rw-r--r--. 2 vdsm kvm 260 dec 17 20.04 e71c2b62-261b-462a-813d-2dc362f32124_MERGE.meta -rw-r--r--. 2 vdsm kvm 260 nov 29 19.31 e71c2b62-261b-462a-813d-2dc362f32124.meta [root@node2 25035c1e-d71b-4083-9092-0f68f3e43028]# qemu-img info 7e5b3508-e8b1-440b-b456-9ce2b3c1de00 image: 7e5b3508-e8b1-440b-b456-9ce2b3c1de00 file format: raw virtual size: 160G (171798691840 bytes) disk size: 157G [root@node2 25035c1e-d71b-4083-9092-0f68f3e43028]# qemu-img info ef5b80e9-f6a3-405f-a668-10de3a18a781 image: ef5b80e9-f6a3-405f-a668-10de3a18a781 file format: qcow2 virtual size: 160G (171798691840 bytes) disk size: 1.1G cluster_size: 65536 backing file: ../25035c1e-d71b-4083-9092-0f68f3e43028/7e5b3508-e8b1-440b-b456-9ce2b3c1de00 backing file format: raw , Thanks in advance. Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] event monitoring
Hi, Thanks a lot! Have a nice day, Tibor - Eredeti üzenet - in the oVirt web-admin: select the 'Users' main tab - select the relevant user (typically the one with which you are logging into the oVirt web-admin) - select the 'Event Notifier' sub-tab - click on the 'Manage Events' button - within the 'Add Event Notification' dialog: select desired events and fill an e-mail address - click 'OK'. see http://i.imgur.com/8V3NQFu.png. as noted in the 'Add Event Notification' dialog: To receive email notifications, ensure that the mail server is configured and the ovirt-event-notifier service is running. Thanks, Einav - Original Message - From: Demeter Tibor tdeme...@itsmart.hu To: users@ovirt.org List users@ovirt.org Sent: Wednesday, December 17, 2014 3:18:19 PM Subject: [ovirt-users] event monitoring Hi, How can I get email notifications of ovirt events? Is there an official way? Thanks Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Seperate ovirt-user-portal
Hi, I would like to add access the ovirt-user-portal webui for external users. Could I seperate this from ovirt-portal-server? I just wondering, maybe that is a possible way if I create an virtual machine for user-portal with external IP address and the users could connect to them. I don't want to add access to the whole portal server directly. Is it possible? Thanks in advance, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] supervdsmServer consumes 30% of host memory
Hi, We have a productive ovirt 3.5 cluster with 3 nodes. The first node has 40 gb of memory and running only one VM that use 8 gb of ram. But the supervdsmserver consumes 20% of host memory. On the second node has 32 GB of memory with 5 VMs. On this node the supervdsmserver using 30%(!) of memory! On the node3 there are 6 VMs with 72 GB of memory. But the supervdsm server use only 1.7% of memory. Does anyone know why? [root@node0 ~]# ps aux|grep supervdsmServer root 19549 0.2 20.8 26248348 8594352 ? Sl 06:00 1:59 /usr/bin/python /usr/share/vdsm/supervdsmServer --sockfile /var/run/vdsm/svdsm.sock --pidfile /var/run/vdsm/supervdsmd.pid [root@node1 ~]# ps aux|grep supervdsmServer root 32701 1.2 29.5 32463704 9717368 ? Sl 03:59 12:08 /usr/bin/python /usr/share/vdsm/supervdsmServer --sockfile /var/run/vdsm/svdsm.sock --pidfile /var/run/vdsm/supervdsmd.pid [root@node2 ~]# ps aux|grep supervdsmServer root 4613 0.0 1.7 6340572 1291476 ? Sl 18:26 0:04 /usr/bin/python /usr/share/vdsm/supervdsmServer --sockfile /var/run/vdsm/svdsm.sock --pidfile /var/run/vdsm/supervdsmd.pid Thanks in advance Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt report portal question
Hi, Anybody can help me? Thanks a lot. Regards, Tibor - Eredeti üzenet - Hi all, How can I make own querys in engine reports? I would like to see the CONSUMED disk usage of a VM /day or /month. Is it possible? Thanks in advance, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.orgmailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ovirt report portal question
Hi, I'm sorry for my last email:( I didn't see your emails. Thank you for the tips. Need to know programming for use jasper studio? Thanks Tibor - Eredeti üzenet - You can use JasperReports Studio to create reports and they will be saved if you use the Saved Reports folder. You can find guide to use this tool in the JasperSoft community website. Yaniv - Original Message - From: Shirly Radco sra...@redhat.com To: Demeter Tibor tdeme...@itsmart.hu Cc: users@ovirt.org List users@ovirt.org, Yaniv Dary yd...@redhat.com Sent: Sunday, November 30, 2014 10:54:42 AM Subject: Re: [ovirt-users] ovirt report portal question Hi Tibor, You can't make your own queries using the reports portal, but you can query directly from the ovirt_egine_history database using the API views. There are the v3_5_statistics_vms_disks_resources_usage_samples /hourly /daily views, They include vm disks usage data. And join them with the other relevant views like v3_5_configuration_history_vms and v3_5_configuration_history_vms_disks. We also plan on adding in 3.6 the vms disk usage including templates and snapshots. Best regards, --- Shirly Radco BI Software Engineer Red Hat Israel Ltd. - Original Message - From: Demeter Tibor tdeme...@itsmart.hu To: users@ovirt.org List users@ovirt.org Sent: Thursday, November 27, 2014 5:26:12 PM Subject: [ovirt-users] ovirt report portal question Hi all, How can I make own querys in engine reports? I would like to see the CONSUMED disk usage of a VM /day or /month. Is it possible? Thanks in advance, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] ovirt report portal question
Hi all, How can I make own querys in engine reports? I would like to see the CONSUMED disk usage of a VM /day or /month. Is it possible? Thanks in advance, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] IPA-auth: user password expired
Hi, Thank you, that's worked! Bye Tibor - Eredeti üzenet - Hi, An ldappasswd command would change it without setting as expired. It will prompt twice for the account password you'll set, and the password for the directory manager once: $ ldappasswd -ZZ -D 'cn=directory manager' -W -S uid=USERNAME,cn=users,cn=accounts,dc=example,dc=org -H ldap:// ipaserver.example.org You'll need to set the username (USERNAME) domain ( example.org ) and server FQDN accordingly. Hope this helps, On Wed, Nov 19, 2014 at 8:38 PM, Demeter Tibor tdeme...@itsmart.hu wrote: Hi, I don't have linux client. Can I change password without this? Thanks, Tibor Hi Tibor, On Wed, Nov 19, 2014 at 6:46 PM, Demeter Tibor tdeme...@itsmart.hu wrote: Hi, I have an IPA server 3.0 on centos 6.6. I successfully attached to my ovirt cluster. I can see the users on ovirt user tab, but after auth I always get this error: Cannot Login. User Password has expired. Use the following URL to change the password: (nothing) I have try out with different long passwords and different users, but it's same. Did you try accessing a regular linux client with the same account? In IPA, new user passwords are always set as expired by design - please see [1]. To test this, you can try to login a client. If it is really expired, system will ask you to provide a new password. After this, you'll be able to login RHEVM with the new password you've just set. [1] http://www.freeipa.org/page/New_Passwords_Expired Regards, -- Ekin -- Ekin Meroğlu Red Hat Certified Datacenter Specialist linuxera Özgür Yazılım Çözüm ve Hizmetleri T +90 (850) 22 LINUX GSM +90 (532) 137 77 04 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] IPA-auth: user password expired
Hi, I have an IPA server 3.0 on centos 6.6. I successfully attached to my ovirt cluster. I can see the users on ovirt user tab, but after auth I always get this error: Cannot Login. User Password has expired. Use the following URL to change the password: (nothing) I have try out with different long passwords and different users, but it's same. Is this version compatible with ovirt 3.5? What did I wrong? Thanks in advance, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] separate ovirtmgmt from glusterfs traffic
Hi, Is this feature will be available on an existing domain or on a live system ? (after upgrade) I would be very grateful if it will available on 3.5.x versions:) In this case your team will be guest for a lot of chocklet/beer from me:) Have a nice day, Tibor - Eredeti üzenet - We will try and address this in the next release of oVirt - there were some issues earlier with identifying the bricks correctly, but with the gluster host uuid support in gluster xml commands, we can fix this. https://bugzilla.redhat.com/show_bug.cgi?id=1049994 - marked for 3.6.0 On 11/19/2014 01:30 AM, Demeter Tibor wrote: Hi, I think is a really good question, why does not possible sepereate storage network traffic like display, etc? This is not an easy task to set up, and it's more difficult on a live system. Tibor - Eredeti üzenet - On 18/11/14 06:25, Juan Pablo Lorier wrote: Hi, In my experience, having ovirt traffic on the same nic that gluster can make your platafrom unstable. I was using it for large file storage and gluster has so big traffic that ovirt got confused and started marking hosts as unavailable because of hi latency. I've opened an RFE over a year ago, but had no luck with the team to get it done. In the RFE I was asking to have a way in the UI to decide which nic to use for gluster other than the MGMT net that is the one ovirt lets you use. There's another way to do this and it's from outside ovirt. There you have to unregister and re register the bricks using gluster console commands. This way, when you register the bricks, you can specify the IP address of the spare NIC and then the traffic will not interfere with the mgmt. There's a step that I don't recall much, but ovirt is going to need to know that the bricks are no longer is the mgmt IP, maybe someone else in the list can help with this. I can tell you that if you search the list you'll see my posts about this and the replys of those who helped my back then. Regards, ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users I think that the possibility to add a separate storage network is a must. It doesn't make sense Gluster support if you can't separate management network traffic of storage network traffic. In 3.5 you can define management/vm/display/migration interfaces but not storage interfaces. Why? I don't know. But I think that Gluster support is incomplete without exclusive storage networking. Regards Federico ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] separate ovirtmgmt from glusterfs traffic
Hi, I think is a really good question, why does not possible sepereate storage network traffic like display, etc? This is not an easy task to set up, and it's more difficult on a live system. Tibor - Eredeti üzenet - On 18/11/14 06:25, Juan Pablo Lorier wrote: Hi, In my experience, having ovirt traffic on the same nic that gluster can make your platafrom unstable. I was using it for large file storage and gluster has so big traffic that ovirt got confused and started marking hosts as unavailable because of hi latency. I've opened an RFE over a year ago, but had no luck with the team to get it done. In the RFE I was asking to have a way in the UI to decide which nic to use for gluster other than the MGMT net that is the one ovirt lets you use. There's another way to do this and it's from outside ovirt. There you have to unregister and re register the bricks using gluster console commands. This way, when you register the bricks, you can specify the IP address of the spare NIC and then the traffic will not interfere with the mgmt. There's a step that I don't recall much, but ovirt is going to need to know that the bricks are no longer is the mgmt IP, maybe someone else in the list can help with this. I can tell you that if you search the list you'll see my posts about this and the replys of those who helped my back then. Regards, ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users I think that the possibility to add a separate storage network is a must. It doesn't make sense Gluster support if you can't separate management network traffic of storage network traffic. In 3.5 you can define management/vm/display/migration interfaces but not storage interfaces. Why? I don't know. But I think that Gluster support is incomplete without exclusive storage networking. Regards Federico ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Strange error messages
Hi, Meanwhile this happening in every two hours. For example 09:21, 11:21, 13:21 Anybody can me help? Thanks, Tibor - Eredeti üzenet - Hi, In this morning I have got a lot of similar messages to console: 2014-Nov-17, 03:21 Detected conflict in hook set-POST-30samba-set.sh of Cluster r710cluster1. 2014-Nov-17, 03:21 Detected conflict in hook stop-PRE-29CTDB-teardown.sh of Cluster r710cluster1. 2014-Nov-17, 03:21 Detected conflict in hook add-brick-PRE-28Quota-enable-root-xattr-heal.sh of Cluster r710cluster1. 2014-Nov-17, 03:21 Detected conflict in hook set-POST-31ganesha-set.sh of Cluster r710cluster1. 2014-Nov-17, 03:21 Detected conflict in hook start-POST-30samba-start.sh of Cluster r710cluster1. 2014-Nov-17, 03:21 Detected conflict in hook reset-POST-31ganesha-reset.sh of Cluster r710cluster1. 2014-Nov-17, 03:21 Detected conflict in hook gsync-create-POST-56glusterd-geo-rep-create-post.sh of Cluster r710cluster1. What does this mean? The system seems to be working. Thanks: Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] separate ovirtmgmt from glusterfs traffic
Hello, Thank you for the detailed reply. Yes, the vms are used an independent network/network interfaces for access the internet. So, in this case I could separate the high glusterfs traffic from ovirt management traffic when I disable vm network on ovirtmgmt interface. I will try-out this night this feature. Thanks a lot, Tibor - Eredeti üzenet - Hi Tibor, On 13/11/14 13:41, Demeter Tibor wrote: Hi, I have a 3 node gluster based cluster. There are 3x3 Nic with bonding. Sometimes the management is very slow because high gluster traffic. Is it possible to separate ovirtmgmt network from glusterfs traffic? I have only one interface (ovirtmgmt) for all of services (migration, etc). I just wondering I will make three VLANs for these services and use the QoS function. But how can specify glusterfs for use an other vlan for gluster traffic an a other one for management? This generally sounds like a good plan, but note that QoS on the host-level will only become available in oVirt 3.6 (it might become available soon on master, if you're feeling lucky...). VM-level QoS (available since 3.3) won't help you with administrative traffic (i.e. traffic that isn't going into / coming out of the VMs themselves). Also, I have more questions about this: - If I specify a VLAN on ovirtmgmt, then what happend on nodes? I'm afraid the nodes will lost the connection with each other nodes. If the switch allows this VLAN to reach all hosts, there shouldn't be a problem; since oVirt 3.4 the VLAN tagging should propagate to all active hosts. However, see my comment below concerning VM network. - Is it possible on a live system? What will happen with the mounted glustefs based datastores? I'm not knowledgeable about gluster specifics, but let's see if I can help. What's the current situation with the gluster network, is it already VLAN-tagged? If it is and you're not moving it to another interface on the hosts, I *think* things should be fine. - What does vm network mean on ovirtmgmt interface? Can I use this for seperate network traffic? This means that a bridge is created for this network on hosts. If VMs don't use this network (i.e. virtual interfaces are assigned profiles of ovirtmgmt), you can make it non-VM (with no VLAN tagging) and have it assigned to the same host interface as VLAN-tagged networks (I would say this is less risky than VLAN-tagging ovirtmgmt). My plan is - vlan.101 ovirtmgmt - vlan 102 glusterfs - vlan 103 migration - vlan 104 display What is the recommended procedure of this? Thanks in advance, Regards, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] separate ovirtmgmt from glusterfs traffic
Ok, thanks a lot! Have a nice day, Tibor - Eredeti üzenet - On 17/11/14 15:10, Demeter Tibor wrote: Hello, Thank you for the detailed reply. Yes, the vms are used an independent network/network interfaces for access the internet. So, in this case I could separate the high glusterfs traffic from ovirt management traffic when I disable vm network on ovirtmgmt interface. And since host-level QoS is not yet available in oVirt, you might want to configure your switch(es) to limit gluster traffic (by VLAN tag) to not hog the (presumably shared) network infrastructure. I will try-out this night this feature. Thanks a lot, Tibor - Eredeti üzenet - Hi Tibor, On 13/11/14 13:41, Demeter Tibor wrote: Hi, I have a 3 node gluster based cluster. There are 3x3 Nic with bonding. Sometimes the management is very slow because high gluster traffic. Is it possible to separate ovirtmgmt network from glusterfs traffic? I have only one interface (ovirtmgmt) for all of services (migration, etc). I just wondering I will make three VLANs for these services and use the QoS function. But how can specify glusterfs for use an other vlan for gluster traffic an a other one for management? This generally sounds like a good plan, but note that QoS on the host-level will only become available in oVirt 3.6 (it might become available soon on master, if you're feeling lucky...). VM-level QoS (available since 3.3) won't help you with administrative traffic (i.e. traffic that isn't going into / coming out of the VMs themselves). Also, I have more questions about this: - If I specify a VLAN on ovirtmgmt, then what happend on nodes? I'm afraid the nodes will lost the connection with each other nodes. If the switch allows this VLAN to reach all hosts, there shouldn't be a problem; since oVirt 3.4 the VLAN tagging should propagate to all active hosts. However, see my comment below concerning VM network. - Is it possible on a live system? What will happen with the mounted glustefs based datastores? I'm not knowledgeable about gluster specifics, but let's see if I can help. What's the current situation with the gluster network, is it already VLAN-tagged? If it is and you're not moving it to another interface on the hosts, I *think* things should be fine. - What does vm network mean on ovirtmgmt interface? Can I use this for seperate network traffic? This means that a bridge is created for this network on hosts. If VMs don't use this network (i.e. virtual interfaces are assigned profiles of ovirtmgmt), you can make it non-VM (with no VLAN tagging) and have it assigned to the same host interface as VLAN-tagged networks (I would say this is less risky than VLAN-tagging ovirtmgmt). My plan is - vlan.101 ovirtmgmt - vlan 102 glusterfs - vlan 103 migration - vlan 104 display What is the recommended procedure of this? Thanks in advance, Regards, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] separate ovirtmgmt from glusterfs traffic
Hi, Thank for tipp, but it is not possible on my productive system. I just wondering, how is possible to change the network of ovirt management? Thanks Tibor - Eredeti üzenet - On 13/11/14 08:41, Demeter Tibor wrote: Hi, I have a 3 node gluster based cluster. There are 3x3 Nic with bonding. Sometimes the management is very slow because high gluster traffic. Is it possible to separate ovirtmgmt network from glusterfs traffic? I have only one interface (ovirtmgmt) for all of services (migration, etc). I just wondering I will make three VLANs for these services and use the QoS function. But how can specify glusterfs for use an other vlan for gluster traffic an a other one for management? Also, I have more questions about this: - If I specify a VLAN on ovirtmgmt, then what happend on nodes? I'm afraid the nodes will lost the connection with each other nodes. - Is it possible on a live system? What will happen with the mounted glustefs based datastores? - What does vm network mean on ovirtmgmt interface? Can I use this for seperate network traffic? My plan is - vlan.101 ovirtmgmt - vlan 102 glusterfs - vlan 103 migration - vlan 104 display What is the recommended procedure of this? Thanks in advance, Regards, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users http://www.ovirt.org/Change_network_interface_for_Gluster ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
