[ovirt-users] quota consumer

Hello, I can create quotas with the SDK ( python) and make a user a consumer of the quota in the admin portal but don't know how to do it with the SDK or API. Any help appreciated. Thanks, Paul S. To view the terms under which this email is distributed, please go

Re: [ovirt-users] Migrate VirtualBox Vm into

Hi Gajendra, virt-v2v didn't support Debian/Ubuntu guests, it is apparently in a later version that is due to be included in RHEL/Centos 7.4 What I did to get a Metasploitable2 image into oVirt was. 1. convert vmdk disk qemu-img convert -f vmdk Metasploitable.v

Re: [ovirt-users] Need Support - Engine VM Down

Hello Rizwan, The upgrade from 3.6 to 4.0 involves installing a new O/S for the engine and restoring from a backup of the 3.6 system, could you set up a new machine (physical or VM) and restore from backups then migrate later into hosted engine setup? http://www.ovirt.o

Re: [ovirt-users] Hosted Engine/NFS Troubles

I used the troubleshooting guide at documentation/how-to/troubleshooting/troubleshooting-nfs-storage-issues/ and exported using (rw,sync,no_subtree_check,all_squash,anonuid=36,anongid=36) This was for the DATA_DOMAIN not hosted storage but it may help. Regards, Paul S.

Re: [ovirt-users] NullPointerException when changing compatibility version to 4.0

Hello, I had trouble changing the compatibility level when VMs had HA enabled, I can't remember what the error message was but it was quite obscure. I had to disable HA for any VMs while I upgraded the compatibility level. Regards, Paul S. ___

[ovirt-users] oVirt memory quota

Hello, when I restart the ovirt engine all quotas show 100% usage for memory, if I open the quota in edit mode and close it again it updates memory used. I'm using 4.1.3.5-1.el7.centos Regards, Paul S. To view the terms under which this email is distributed, plea

Re: [ovirt-users] Python errors with ovirt 4.1.4

Hello, I have 3 nodes and used the engine to update them to ovirt-node-ng-4.1.4-0.20170728.0 but the engine still reported a new update which I tried but it failed. On the nodes yum check-update showed an update for ovirt-node-ng-nodectl.noarch4.1.4-0.20170728.0.el7 instal

Re: [ovirt-users] Cannot set a quota to limit resources for each user

Hi Soumya, You can copy quotas, what I can't figure out is how to set a consumer from the API. In table 7.263 Attributes Summary at https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.1/html/rest_api_guide/types#types-quota it show a users attribute but I

Re: [ovirt-users] Python errors with ovirt 4.1.4

27;." Regards, Paul S. From: Yuval Turgeman Sent: 07 August 2017 13:37 To: Staniforth, Paul Cc: david caughey; Users@ovirt.org Subject: Re: [ovirt-users] Python errors with ovirt 4.1.4 Hi, The problem should be solved here: http://jenkins.ovir

Re: [ovirt-users] Install ovirt on Azure

Although I haven't had time to try it HVX in ravello can do nested virtualization for KVM. https://www.ravellosystems.com/technology/nested-virtualization Regards, Paul S. From: users-boun...@ovirt.org on behalf of Yaniv Kaul Sent: 07 Aug

Re: [ovirt-users] ovirtmgmt network security

Yes you don't need ovirtmgmt on the VMs and I think if you use passthrough it will pin it to the host, probably better to create a DMZ logical network and attach the hosts in the cluster to the DMZ VLAN which will allow them to migrate and be setup for HA. Regards, Paul S. ___

Re: [ovirt-users] HEVM root reset?

Some useful commands for the host running the hosted-engine /usr/sbin/hosted-engine --add-console-passw..d /usr/sbin/hosted-engine --console Put it in maintenance, then start an alternate configuration /usr/sbin/hosted-engine --vm-start --vm-conf= Load an alternative vm.

[ovirt-users] UI problem with Edit NIC

Hello, we are using ovirt 3.6.0 and have a private network switch installed that we would like users to be able to attach VMs to but we don't want them to have access the the ovirtmgnt network. When we take away the permission VnicProfileUser on Vnic Profile ovirtmgmt the is no Pro

[ovirt-users] Moving Hosted Engine NFS storage domain

Hello, we would like to move our NFS storage used for the HostedEngine. Plan would be * enable global maintenance * shut-down HostedEngine VM * edit /etc/ovirt-hosted-engine/hosted-engine.conf on hosts * storage=newnfs:/newnfsvolume * copy storage domain from ol

[ovirt-users] quota creation from ovirt-shell

Hello, I am trying to create user quotas from the command line via the shell. I am using ovirt 3.6.7 and the command add quota --parent-datacenter-name Default --name testcli creates a quota but without quotaclusterlimit or quotastoragelimit I can't find the correct syntax to c

Re: [ovirt-users] quota creation from ovirt-shell

t: 20 September 2016 10:44 To: Staniforth, Paul Cc: users@ovirt.org Subject: Re: [ovirt-users] quota creation from ovirt-shell Hi, there is a bug in the ovirt-cli, which makes creating quotaclusterlimit and quotastoragelimit impossible. The correct syntax would be: add quotastoragelimit --parent-datac

Re: [ovirt-users] quota creation from ovirt-shell

r 2016 07:30 To: Staniforth, Paul Cc: Andrej Krejcir; users@ovirt.org Subject: Re: [ovirt-users] quota creation from ovirt-shell On Tue, Sep 20, 2016 at 2:00 PM, Staniforth, Paul mailto:p.stanifo...@leedsbeckett.ac.uk>> wrote: Thanks Andrej, it gives me an

Re: [ovirt-users] oVirt Console on Windows 7

The virt-manager package has a number of programs but the one you should use is remote-viewer. In your clients browser associate the console.vv file with remote-viewer and then it will start remote-viewer passing the console.vv file with the connection details including the OTP (one time p...wor

Re: [ovirt-users] virt-manager not able to connect to my ovirt-instance

: Staniforth, Paul; users@ovirt.org Subject: Re: [ovirt-users] virt-manager not able to connect to my ovirt-instance Thanks Paul, I have tried opening it using "remote-viewer", but I get error message as "Unable to connect to the graphic server /tmp/mozilla_saji0/console.vv Could

Re: [ovirt-users] virt-manager not able to connect to my ovirt-instance

You should use remote-viewer to connect to the console of the VM, it's in the same package and you should pass the connection details to it from the portal(the console.vv file gets created including the otp). Regards, Paul S. On 16 Mar 2017 07:36, John Joseph wrote: Hi , I was able to

Re: [ovirt-users] Bulk move vm disks?

Hello Christian, I have recently moved around 700 VM disks between storage domains, you can select multiple disks in the GUI and move them. I did this on oVirt 3.6 most of these were dependant on template disks so I had to copy the template disks to the destination dom

[ovirt-users] Re: Quick generic Questions

Hello Christian, here are some useful links https://www.ovirt.org/documentation/gluster-hyperconverged/Gluster_Hyperconverged_Guide.html https://access.redhat.com/documentation/en-us/red_hat_hyperconverged_infrastructure_for_virtualization/1.6/ You need to have at least 1 device for the O/S no

[ovirt-users] Re: Quick question regarding FQDN

Hello Christian, That recommendation is for the hyper-converged installation as the nodes are also the storage servers so you would choose the storage addresses when setting up the gluster network. The other thing is you may have to setup a display network proxy if your

[ovirt-users] Re: After importing the ovirt-engine 4.3.5 backup file into ovirt-engine 4.3.6, will the information of the ovirt-engine 4.3.6 management interface be the same as ovirt-engine 4.3.5?

I haven't tried it but doesn't engine-setup --offline stop it upgrading minor releases. Regards, Paul S. From: Yedidyah Bar David Sent: 11 November 2019 07:57 To: wangyu13476969...@126.com Cc: users Subject: [ovirt-users] Re: After importing t

[ovirt-users] Re: After importing the ovirt-engine 4.3.5 backup file into ovirt-engine 4.3.6, will the information of the ovirt-engine 4.3.6 management interface be the same as ovirt-engine 4.3.5?

Thanks, I should have been clearer, what I meant was could you install 4.3.5 and restore to that, then run engine-setup --offline? Regards, Paul S. From: Yedidyah Bar David Sent: 11 November 2019 10:19 To: Staniforth, Paul Cc

[ovirt-users] Re: When I log in ovirt-engine , it show "Unable to log in because the user account is disabled or locked. Contact the system administrator."

You can use the following command. ovirt-aaa-jdbc-tool user unlock test1 https://www.ovirt.org/documentation/admin-guide/chap-Users_and_Roles.html Regards, Paul S. From: wangyu13476969...@126.com Sent: 11 November 2019 09:05 To: users@ovirt.org

[ovirt-users] Re: restore

As you did a full backup including the data warehouse you need engine-backup --mode=restore --file=file_name --log=log_file_name --provision-db --provision-dwh-db --restore-permissions see https://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration.html Backups and Migration | o

[ovirt-users] Re: Importing a Virtual Machine from a KVM Host

Hello Dirk, The link you are using is old developer docs, try the following. https://www.ovirt.org/documentation/admin-guide/chap-External_Providers.html You need to setup an external provider and use a proxy host in the datacentre (not the engine host) you want to import into, this needs to be o

[ovirt-users] Re: Hyper-V to KVM | v2v

Hello Vijay, as the error suggests Windows 8 onward defaults to not doing a full shutdown but fast boot, this is why in Windows troubleshooting it's suggested to do a reboot as this does a full shutdown then boot. You should probably disable fast-boot on the Windows guest. h

[ovirt-users] Re: Clusters: Clarification needed on the ballooning memory feature and its affects on the physical hosts memory

Hello Donagh, memory size e.g. 62000MB is the memory the VM tells the O/S is available you should be able to see how much is actually used if the agent is installed. maximum memory e.g. 248000MB is the amount you can hot-plug for the VM otherw

[ovirt-users] Re: katello-host-tools-3.5.1 and Red Hat Satellite 6.4

Hello Matthias, The oVirt hosts need to be registered in redhat satellite as a content host and the satellite host will need to have the centos and oVirt yum repositories added so they can create a content view. The first step I would do is ask whoever manages your satellite server if they are

[ovirt-users] Re: ovirt vdsm and networking

Hi Kim, you should be able to from the admin portal for the interfaces of your hosts go into setup host networks and change the boot protocol for your student network to manual or dhcp. If you don't want your student VMs having network access to your hosts you could configure a

[ovirt-users] Re: null

Hi, if you have a network in the cluster that is set to required any hosts in the cluster will become non-operational if it's isn't available. You can set the logical network not to be required while testing or if it isn't essential. Regards, Paul S.

[ovirt-users] Re: ovirt-provider-ovn external network provider

aul S. From: Dominik Holler Sent: 14 January 2020 16:23 To: Staniforth, Paul Cc: users ; Miguel Duarte de Mora Barroso Subject: Re: [ovirt-users] ovirt-provider-ovn external network provider Caution External Mail: Do not click any links or open any attachments unless

[ovirt-users] Re: upgrade issue

Hello Jingjie, I think you need to install https://resources.ovirt.org/pub/yum-repo/ovirt-release43.rpm

[ovirt-users] Re: upgrade issue

Hi Jingjie, If you have a node installed using ovirt-node-ng it created a thin LVM pool and ovirt-node-ng-image-update creates a new LVM layer so you have 2 versions of the node that you can switch between. Regards, Paul S. F

[ovirt-users] Re: upgrade issue

15 January 2020 18:25 To: Staniforth, Paul ; Parth Dhanjal Cc: users Subject: Re: [ovirt-users] Re: upgrade issue Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe. Hi Paul, Thanks for your reply. I did in

[ovirt-users] Re: oVirt on a Single Server

Hello Matt, probably the easiest setup to test/evaluate oVirt it to use ORB https://www.ovirt.org/documentation/ovirt-orb/ oVirt Orb | oVirt oVirt is a free open-source virtualization solution for your entire enterprise www.ovirt.o

[ovirt-users] Re: KVM (libvirt) VM Import

Hi, Have you enable public key authentication between your proxy host and KVM host? Does the proxy host have v2v installed? https://www.ovirt.org/documentation/vmm-guide/chap-Administrative_Tasks.html https://www.ovirt.org/documentation/vmm-guide/chap-Administrative_Tasks.html Administ

[ovirt-users] Re: command line vm start/stop

Hello, you could use ansible or for a common cli to (libvirt, KubeVirt, oVirt, OpenStack, VMware vSphere, GCP and AWS) you could try kcli https://github.com/karmab/kcli/blob/master/doc/index.md ( although I haven't tried it yet). Regards, Paul S.

[ovirt-users] Re: Windows Server Migration from Proxmox

Hello, it may be a driver problem, try changing the disk interface to IDE, if that boots install the virtio drivers and remove any Proxmox drivers, Regards, Paul S. From: Robert Webb Sent: 27 January 2020 20:33 To: users Subject: [ovi

[ovirt-users] Re: Problems in new oVirt install

Yes that's what usually happens the VM will be paused when the backing storage starts running out of space, try deleting the ISO from where you uploaded it to. Regards, Paul S. From: Steve Watkins Sent: 29 January 2020 00:13 To: users@ovirt.org Subject: [ovirt

[ovirt-users] Re: new glance server

The pike packages are at http://vault.centos.org/ Regards, Paul S. From: Tommaso - Shellrent Sent: 04 February 2020 16:25 To: users@ovirt.org Subject: [ovirt-users] new glance server Caution External Mail: Do not click any links or open any a

[ovirt-users] Re: Websocket-proxy not working after upgrade to 4.3

What does this show engine-config -g WebSocketProxy should be :6100 if not try setting it with engine-config -s WebSocketProxy=:6100 then restarting the engine. Regards, Paul S. From: Gianluca Cecchi Sent: 05 February 2020 13:57 To: Nicolás

[ovirt-users] Re: Huge increase of CPU load on hosted engine VM after upgrade to 4.3.8 and cluster compatibility version

Has this bug come back engine.log flooded with "Field 'foo' can not be updated when status is 'Up'" https://lists.ovirt.org/archives/list/users@ovirt.org/thread/MKFQRCKHRT6NJUHF7URJTQG753MND6PJ/?sort=date Regards, Paul S. From: Florian Schmid Sent: 06 February

[ovirt-users] Re: Move Self Hosted Engine to Standalone

Hi Jeremy, I think you must have run the engine-setup before the restore, the restore is designed to restore to a clean install or the previous install with the same credentials. If you delete the postgresql config you can then install with your postgres credentials. e.g. s

[ovirt-users] Re: Ovirt API and CLI

Hi Eugène can't you use ansible add-hoc commands ? for a common cli to (libvirt, KubeVirt, oVirt, OpenStack, VMware vSphere, GCP and AWS) you could try kcli https://github.com/karmab/kcli/blob/master/doc/index.md ( although I haven't tried it yet). Regards, Paul S. ___

[ovirt-users] Re: Changing the Data Warehouse Sampling Scale

Hello Anton, you can also manually do this edit /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/10-setup-scale.conf run systemctl restart ovirt-engine-dwhd.service if you upgrade your engine it puts the old 10-setup-scale.conf back but it keeps a co

[ovirt-users] Re: oVirt Storage quota problems

Sorry haven't used quota in a while, one thought is there a template quota getting used? Regards, Paul S. From: Vrgotic, Marko Sent: 13 March 2020 15:15 To: Staniforth, Paul ; users@ovirt.org Cc: Stojchev, Darko Subject: Re: oVirt St

[ovirt-users] Re: Client separation on bridge level

Can't you put then on separate VLANs? Regards, Paul S. From: Hendrik Peyerl Sent: 16 March 2020 09:24 To: users@ovirt.org Subject: [ovirt-users] Client separation on bridge level Caution External Mail: Do not click any links or open any attachmen

[ovirt-users] Re: bare-metal to self-hosted engine

Hello Kim, as it says in the documentation a SHE setup is more complex to maintain, see the following about upgrades, configuration changes and backups. https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3/html/administration_guide/chap-administering_the_se

[ovirt-users] Re: Local network

The engine runs the controller so ovn-sbctl won't work, on the hosts, use ovs-vsctl show Paul S. From: Tommaso - Shellrent Sent: 31 March 2020 12:13 To: Staniforth, Paul ; users@ovirt.org Subject: Re: [ovirt-users] Local network Caution External Mail: D

[ovirt-users] Re: Local network

.Hello Tommaso, on your oVirt engine host run check the north bridge controller ovn-nbctl show this should show a software switch for each ovn logical network witch any ports that are active( in your case you should have 2) check the south bridge controller ovn-sbctl s

[ovirt-users] Re: Multiple NICs on hosted engine, oVirt 4.3

Hello Jri, The configurations local and shared are managed by hosted-engine command. https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3/html/administration_guide/chap-administering_the_self-hosted_engine [https://access.redhat.com/webassets/avalon/g/shadowman-20

[ovirt-users] Re: Multiple NICs on hosted engine, oVirt 4.3

ocal Is it valid to change it to (for example) /etc/ovirt-hosted-engine/vm.conf and modify that file there? Is it safe for further updates, maintenance, etc.? Maybe the second question - which process creates vm.conf in /var/run path? Cheers, Jiri On 4/5/20 8:35 AM, Staniforth, Pau

[ovirt-users] Re: VM's in status unknown

I don't think the status is reported via the agent but vdsm on the host. Try restarting the engine service. use vdsm-client on the host to see if the VM running and shut it down if needed. https://www.ovirt.org/develop/developer-guide/vdsm/vdsm-client.html on the host restart vdsmd ( you may

[ovirt-users] Re: assign a specific user to a specific vm

Hello Eric, It sounds like you have permissions set to a group at some level, these are hierarchical system->datacenter->cluster->VM if you remove this permission and then set the userrole for the VM they should only be allowed to run this VM. Regards, Paul S

[ovirt-users] Re: assign a specific user to a specific vm

Sent: 17 April 2020 15:28 To: Staniforth, Paul ; users@ovirt.org Subject: RE: [ovirt-users] Re: assign a specific user to a specific vm Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe. You said: “set the

[ovirt-users] Re: assign a specific user to a specific vm

Paul S. From: eev...@digitaldatatechs.com Sent: 17 April 2020 15:42 To: Staniforth, Paul ; users@ovirt.org Subject: RE: [ovirt-users] Re: assign a specific user to a specific vm Caution External Mail: Do not click any links or open any attachments unless you trust t

[ovirt-users] Re: User Groups

Hello Anton, In the Administration->Users there is a groups button. Regards, Paul S. From: Anton Louw Sent: 29 April 2020 06:36 To: users@ovirt.org Subject: [ovirt-users] User Groups Caution External Mail: Do not click any

[ovirt-users] Re: Node Unresponsive

Hi Anton, I wasn't considering the hosted-engine just in the engine VM systemctl restart ovirt-engine.service Regards, Paul S. From: Artur Socha Sent: 07 May 2020 14:54 To: Anton Louw ; users@ovirt.org Subject: [ovirt-users] Re

[ovirt-users] Re: Node Unresponsive

Hi Anton, should be yum instead of dnf as it using centos7 Regards, Paul S. From: Anton Louw via Users Sent: 07 May 2020 15:22 To: Artur Socha ; users@ovirt.org Subject: [ovirt-users] Re: Node Unresponsive Caution External Mai

[ovirt-users] Re: AutoStart VMs (was Re: Re: oVirt 4.4.0 Release is now generally available)

Thanks Derek, GitHub or GitLab probably. Regards, Paul S. From: Derek Atkins Sent: 27 May 2020 15:50 To: Gianluca Cecchi Cc: tho...@hoberg.net ; users Subject: [ovirt-users] AutoStart VMs (was Re: Re: oVirt 4.4.0 Release

[ovirt-users] Re: ETL service aggregation error

Hello Shashank, I can't see any of your images and also it would be better to have the log file as text. Regards, Paul S. From: Ayansh Rocks Sent: 04 June 2020 15:16 To: users Subject: [ovirt-users] Re: ETL ser

[ovirt-users] Re: oVirt noVNC

Hello Anton, if your organisation has it's own CA you can install your own certificates or get certificates from a trusted CA. https://www.ovirt.org/documentation/admin-guide/appe-oVirt_and_SSL.html Paul S. From: Anton Louw via Users Sen

[ovirt-users] Re: oVirt noVNC

No worries, If all is pointing to the correct files I would check permissions. Regards, Paul S. From: Anton Louw Sent: 12 June 2020 09:34 To: Staniforth, Paul ; users@ovirt.org Subject: RE: oVirt noVNC Caution External

[ovirt-users] Re: oVirt noVNC

/apache-ca.pem * Save your CA certificate as /etc/pki/ovirt-engine/apache-ca.pem. # cp /tmp/3rd-party-ca-cert.pem /etc/pki/ovirt-engine/apache-ca.pem Regards, Paul S. From: Anton Louw Sent: 12 June 2020 11:06 To: Staniforth, Paul ; u

[ovirt-users] Re: oVirt noVNC

ertificate bundles for both systems? Regards, Paul S. From: Anton Louw Sent: 12 June 2020 11:44 To: Staniforth, Paul ; users@ovirt.org Subject: RE: oVirt noVNC Caution External Mail: Do not click any links or open any attachments unless you

[ovirt-users] Re: ETL service aggregation error

Paul S. . From: Ayansh Rocks Sent: 24 June 2020 12:47 To: Staniforth, Paul ; users Subject: Re: [ovirt-users] Re: ETL service aggregation error Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know

[ovirt-users] Re: ETL service aggregation error

-engine-dwh/services/ovirt-engine-dwhd/ovirt-engine-dwhd.conf for settings. Regards, Paul S. From: Ayansh Rocks Sent: 25 June 2020 10:40 To: Staniforth, Paul ; users Subject: Re: [ovirt-users] Re: ETL service aggregation error Caution External

[ovirt-users] Re: ETL service aggregation error

tion_guide/#chap-Backups_and_Migration Regards, Paul S. From: Ayansh Rocks Sent: 27 June 2020 06:42 To: Staniforth, Paul Cc: users ; de...@ovirt.org Subject: Re: [ovirt-users] Re: ETL service aggregation error Caution External Mail: Do not click

Re: [ovirt-users] Ovirt 4.2 Lab on ESXi

We had a system some nodes on VMware in nested mode, I think they may have worked in 3.6 and VMware 6.0, when they were upgraded to VMware 6.5 and oVirt 4.1 when the VMs were started they hung at the SeaBIOS prompt, if they were migrated to a oVirt bare metal node the VM would finish booting.

[ovirt-users] oVirt 4.1 change ovirtmgmt to enable VLAN tagging

Hello, We have an oVirt 4.1 cluster of 3 ovirt-nodes that currently on the management network don't have VLAN tagging enabled, we would like to enable VLAN tagging and so would be grateful of anyone had an information or experience doing this. The management engine is running on a s

Re: [ovirt-users] oVirt 4.1 change ovirtmgmt to enable VLAN tagging

Thanks Luca, I'll talk to our network team. Paul S. On 22 Jan 2018 19:10, Luca 'remix_tj' Lorenzetto wrote: Il 22 gen 2018 7:49 PM, "Staniforth, Paul" mailto:p.stanifo...@leedsbeckett.ac.uk>> ha scritto: Hello, We have a

Re: [ovirt-users] oVirt 4.1 change ovirtmgmt to enable VLAN tagging

2018 19:10 To: Staniforth, Paul Cc: users Subject: Re: [ovirt-users] oVirt 4.1 change ovirtmgmt to enable VLAN tagging Il 22 gen 2018 7:49 PM, "Staniforth, Paul" mailto:p.stanifo...@leedsbeckett.ac.uk>> ha scritto: Hello, We have an oVirt 4.1 cluster of 3 ovirt-n

Re: [ovirt-users] oVirt 4.1 change ovirtmgmt to enable VLAN tagging

Thanks Luca, FYI we have an Avaya network infrastructure. Paul S. From: Luca 'remix_tj' Lorenzetto Sent: 23 January 2018 10:00 To: Staniforth, Paul Cc: users Subject: Re: [ovirt-users] oVirt 4.1 change ovirtmgmt to e

[ovirt-users] 4.1 slot user portal vm creation

Hello, We are experiences slow response when trying to create a new vm in the user portal (for some users the New Virtual Machine page doesn't get created). Also in the Templates page of the user portal it doesn't list the templates, just has the 3 waiting to load icons flashing. In

Re: [ovirt-users] 4.1 slot user portal vm creation

r students to hot-plug vnics and select different vNic profiles amongst other features. Thanks, Paul S. From: Michal Skrivanek Sent: 29 January 2018 14:58 To: Staniforth, Paul Cc: users@ovirt.org Subject: Re: [ovirt-users] 4.1 slot user portal v

Re: [ovirt-users] 4.1 slot user portal vm creation

hout the header it's fast. As our test system has no storage or hosts is it possible to delete templates from the database as a restore from October doesn't seem to have the problem. Thanks, Paul S. From: Michal Skrivanek Sent: 29 January 2

Re: [ovirt-users] Maximum time node can be offline.

Hello, you should be able to use the power saving cluster scheduling policy. https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2-beta/html/administration_guide/sect-Scheduling_Policies Regards, Paul S. From: users

Re: [ovirt-users] Issues with ZFS volume creation

Hello Tal, ZFS is probably detecting a partition table on the disks, you could delete the partition tables on /dev/sda,/dev/sdb ... etc, or you could use the force option of ZFS create making sure they aren't mounted somewhere. Regards, Paul S. __

Re: [ovirt-users] How it is oVirt used in your Department?

Have you tried ManageIQ ? It's in the ovirt-image-repository Regards, Paul S. From: users-boun...@ovirt.org on behalf of ~Stack~ Sent: 08 April 2018 15:33 To: users@ovirt.org Subject: Re: [ovirt-users] How it is oVirt used in your Depar

Re: [ovirt-users] Failed to upgrade from 4.1 to 4.2 - Postgre version required

I'm having this problem as well. It's suggested here to backup the databases and install new clean version of postgresql with the correct encoding,collation, etc and restore the databases. https://www.mail-archive.com/users@ovirt.org/msg47854.html I hope to try this today or tomorrow on a te

Re: [ovirt-users] User portal permissions

Hello Kristian, I haven't upgraded to 4.2 yet but in 4.1 I create a Directory services group and add the user to it Then I give the user roles VmCreator DiskProfileUser VnicProfileUser These can be added to a DC, storage domain, cluster, etc. The VnicProfileUser means that you can res

[ovirt-users] Re: oVirt Orb 4.2.3 is now available

Hello Sandro, On the last version when trying to run it on Fedora instead of Centos it fails because it only installs version3 of the Python SDK. The workaround is to download the version4 SDK rpm and install that. Thanks, Paul S. ___

[ovirt-users] Re: User & Roles

Hi Simon, select resource ( datacenter or host), then select the permissions tab, then add the permission to the user or group. Regards, Paul S. From: Simon Coter Sent: 17 May 2018 16:48 To: users Subject: [ovirt-users] User &

[ovirt-users] oVirt 4.1 ETL service sampling has encounterd an error

Hello, our oVirt 4.1 system has had a DWH error since around 4am this morning, It comes up with the error ETL service sampling has encountered an error. Please consult the service log for more details in the ovirt-engine-dwh.log 2018-06-05 12:00:18|QXiOTi|gAp8Q4|Cz1F21|OVIRT_ENGINE_DWH|

[ovirt-users] Re: oVirt 4.1 ETL service sampling has encounterd an error

_type(character varying,character varying,character varying,character varying) line 9 at EXECUTE statement Thanks, Paul S. From: Staniforth, Paul Sent: 06 June 2018 09:57 To: Shirly Radco Cc: users@ovirt.org Subject: Re: [ovirt-users] oVirt 4.1 E

[ovirt-users] Re: oVirt 4.1 ETL service sampling has encounterd an error

a database expert. Regards, Paul S. From: Shirly Radco Sent: 05 June 2018 14:52 To: Staniforth, Paul Cc: users@ovirt.org Subject: Re: [ovirt-users] oVirt 4.1 ETL service sampling has encounterd an error Hi, This was fixed in https://bugzilla.

[ovirt-users] Re: oVirt 4.1 ETL service sampling has encounterd an error

aul S. From: Shirly Radco Sent: 06 June 2018 12:01 To: Staniforth, Paul Cc: users@ovirt.org; Eli Mesika; Yedidyah Bar David Subject: Re: [ovirt-users] oVirt 4.1 ETL service sampling has encounterd an error In that case there is a workaround but I would recommend upgrading to 4.2 if you ca

[ovirt-users] oVirt 4.2 vm-portal console

Hello, I have installed a test system for oVirt 4.2 and it seems that in the vm portal I can't change the console to vnc or spice+vnc. It seems that this is only available in the admin portal. Am I missing something? Thanks, Paul S. To view the terms under which this

[ovirt-users] upgrade 4.1 to 4.2

Hello, I am trying to test the upgrade of our system from oVirt 4.1 to oVirt 4.2. I'm trying to restore a backup onto a test system but cannot install version 4.1 as the repos are not available. yum install http://resources.ovirt.org/pub/yum-repo/ovirt-release41.rpm yum install ovir

[ovirt-users] Fw: upgrade 4.1 to 4.2

From: Staniforth, Paul Sent: 18 June 2018 16:55 To: users@ovirt.org Subject: upgrade 4.1 to 4.2 Hello, I am trying to test the upgrade of our system from oVirt 4.1 to oVirt 4.2. I'm trying to restore a backup onto a test system but cannot in

[ovirt-users] Re: upgrade 4.1 to 4.2

Thanks Didi, It doesn't seem to have ovirt-engine, amongst other missing packages. Regards, Paul S. From: Yedidyah Bar David Sent: 19 June 2018 08:18 To: Staniforth, Paul Cc: users@ovirt.org Subjec

[ovirt-users] Re: upgrade 4.1 to 4.2

. Regards, Paul S. From: Ido Rosenzwig Sent: 20 June 2018 07:32 To: Staniforth, Paul Cc: Yedidyah Bar David; users@ovirt.org Subject: Re: [ovirt-users] Re: upgrade 4.1 to 4.2 Dear paul, You can do the following: 1. Check which repos are

[ovirt-users] Restore and rename engine

Hello, I have been trying to test our system by restoring from backup to a new machine and running ovirt-engine-rename, then engine-setup. I get to sent back to the main oVirt Web page from any of the portals, which has an Warning triangle saying the engine is initializing. and in

[ovirt-users] Re: Restore and rename engine

I have fixed this now by deleting /etc/ovirt-engine/engine.conf.d/99-custom-truststore.conf Paul S. From: Staniforth, Paul Sent: 22 June 2018 15:54 To: users@ovirt.org Subject: Restore and rename engine Hello, I have been trying to test our

[ovirt-users] Re: User permission. All user can access (start, shutdown) all vm in User/VM portal

Hi Florent, are the permissions system or on a object (Datacenter,Cluster). Regards, Paul S. From: florentl Sent: 05 July 2018 09:29 To: users Subject: [ovirt-users] User permission. All user can access (start, shutdow

[ovirt-users] Re: change from LDAP to AD authentication

, and disks or to use the roles service to find the user/object. Regards, Paul S. From: Martin Perina Sent: 08 July 2018 12:31 To: Staniforth, Paul Cc: users; Ondra Machacek Subject: Re: [ovirt-users] change from LDAP to AD authentication On Thu

[ovirt-users] Re: Wrong network threshold limit warnings on 4.2.5

Hello Edward, I am also seeing this problem, it's on our ovirtmgmt. cat /sys/class/net/eno49/speed 1 cat /sys/class/net/eno49.20/speed 1 cat /sys/class/net/ovirtmgmt/speed cat: /sys/class/net/ovirtmgmt/speed: Invalid argument vdsm-client Host getStats -> ..

  1   2   3   >