On Fri, Dec 13, 2019 at 3:56 PM wrote:
> > On Thu, Dec 12, 2019 at 4:27 PM >
> >
> >
> > Not external logical networks, with vNIC profiles, have no network filter
> > during the VM is started (or the vNIC is hotplugged),
> > allows any MAC address. This works without any hook required.
> > In mo
> On Thu, Dec 12, 2019 at 4:27 PM
>
>
> Not external logical networks, with vNIC profiles, have no network filter
> during the VM is started (or the vNIC is hotplugged),
> allows any MAC address. This works without any hook required.
> In most simple flow for a lab would be to remove the networ
On Thu, Dec 12, 2019 at 4:27 PM wrote:
> > On Thu, Dec 12, 2019 at 11:29 AM >
> >
> > I see.
> > This will create an external OVN network.
> > As far as I know, OVN networks do not allow mac spoofing, even if port
> > security is disabled.
> >
> I have installed the vdsm hook for allow both prom
> On Thu, Dec 12, 2019 at 11:29 AM
>
> I see.
> This will create an external OVN network.
> As far as I know, OVN networks do not allow mac spoofing, even if port
> security is disabled.
>
I have installed the vdsm hook for allow both promiscuous and mac-spoofing and
have the same experience.
On Thu, Dec 12, 2019 at 11:29 AM wrote:
> > On Wed, Dec 11, 2019 at 5:31 PM >
> > Is VyOS installed on the host, or in a VM?
> >
> VyOS is installed on the ovirt node
> >
> >
> > Does this mean that the VyOS VM on oVirt should forward layer 2 traffic
> to
> > the VyOS VM on proxmox?
> > Is there
> On Wed, Dec 11, 2019 at 5:31 PM
> Is VyOS installed on the host, or in a VM?
>
VyOS is installed on the ovirt node
>
>
> Does this mean that the VyOS VM on oVirt should forward layer 2 traffic to
> the VyOS VM on proxmox?
> Is there a way to share a VLAN? (This would avoid additional tunneli
On Wed, Dec 11, 2019 at 5:31 PM wrote:
> We currently have 2 bare metals.
> One holds the ovirt and the other proxmox.
>
> As to enable high availability and config sync on the proxmox hosted VMs
> we have deployed VyOS on both hyper-visors.
>
>
Is VyOS installed on the host, or in a VM?
> We t
We currently have 2 bare metals.
One holds the ovirt and the other proxmox.
As to enable high availability and config sync on the proxmox hosted VMs we
have deployed VyOS on both hyper-visors.
We then use L2TPv3 as to extend VM networks from proxmox to ovirt and vice
versa.
When that was finali
On Wed, Dec 11, 2019 at 12:12 PM wrote:
> Hi all
>
> I have a VM network created with some hosts and I have included a vyos
> router acting as a Layer 2 extension to another hypervisor through VXLAN.
>
>
This sounds interesting, but might be not supported by oVir. Can you share
details?
What is
9 matches
Mail list logo