Re: [ovirt-users] oVirt management network
The situation you got to (where there are ovirtmgmt bridges over both bond0 directly and over the bond0.231 VLAN device), likely via manual intervention, is indeed inconsistent from oVirt's perspective. You should be able to SSH into the host and run something like "brctl delif ovirtmgmt bond0", then refresh capabilities on the webadmin console and get to a situation where ovirtmgmt is configured only on top of the VLAN device. Succeeding networking operations on the host should then work as expected... On 31/03/15 14:03, Bojan Popovic wrote: > Of course. > Here it is: > > net > > As you can see on the lower part of the screenshot, ovirtmgmt is on top > of the bond0.231 interface and on top of bond0 also. > I would like to remove bond0 from the bridge, cause it blocks every > other operation using this dialog, whatever I try to change I'm only > able to cancel it because I am confronted with the following: > > problem > > Thanks for the help. > > > On 31.03.2015. 12:52, Lior Vernia wrote: >> Hello Bojan, >> >> I'm still having difficulties understanding the exact situation. Could >> you please click the "Refresh Capabilities" button in the hosts tab when >> the relevant host is selected and supply a screenshot of the Setup Host >> Networks dialog on that host afterwards. Then explain what about that >> situation you'd like to change. >> >> Yours, Lior. >> >> On 31/03/15 12:12, Bojan Popovic wrote: >>> I have a hosted engine. It is on the same VLAN as the hosts are, so I am >>> not having connectivity issues. I am not going to alter that part of the >>> setup but I do need to add more networks, and I can not because I can >>> not save the configuration, no matter what I change it is not saved. >>> >>> Ovirtmgmt is vlan-tagged. >>> >>> Is there some config file that can be edited manually, or maybe it can >>> be done in the database? >>> >>> On 30.03.2015. 13:32, Dan Kenigsberg wrote: On Mon, Mar 30, 2015 at 12:15:09PM +0200, Bojan Popovic wrote: > Hello, I am having a strange issue in creating ovirtmgmt bridge over > vlan interface. > > I have set-up a bond from physical interfaces. On top of a bond there > are three VLANs one of which is in ovirtmgmt bridge. I have set it up > manually according to http://www.ovirt.org/Bonding_VLAN_Bridge > > Somehow the bond itself is also added to bridge in oVirt web interface, > after reboot there also were two added lines to configuration of that > bond: > # Generated by VDSM version 4.16.10-8.gitc937927.el7 > BRIDGE=ovirtmgmt > > No matter how I try to remove the bond from the bridge it doesn't > succeed. If I edit the config files manually it isn't replicated to web > interface. If I try to detach it from web interface, I can only attach > bridge back to the bond interface. Of course configuration cannot be > saved until the bridge is attached to an interface. > > I have tried putting the host in maintenance mode, shutting down the > hosted engine and doing all the changes live. > > Anyone has a suggestion how to resolve this? I'd first like to understand how you intend for management traffic to travel from your Engine to the host. Do you have a vlan connection between the two? What is the host's IP address on that vlan? Since you have connectivity to the host, we can tell that you have un-tagged traffic to the host. In most (sane) cases, the IP address on the untagged network is different from the vlan'ed one. To use the latter, you'd need to remove the host from the cluster, and add it back with its second address. Did you define ovirtmgmt as a vlan-tagged network? Or do you intend to have a special hack for this host? Regards, Dan. >>> ___ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt management network
Hello Bojan, I'm still having difficulties understanding the exact situation. Could you please click the "Refresh Capabilities" button in the hosts tab when the relevant host is selected and supply a screenshot of the Setup Host Networks dialog on that host afterwards. Then explain what about that situation you'd like to change. Yours, Lior. On 31/03/15 12:12, Bojan Popovic wrote: > I have a hosted engine. It is on the same VLAN as the hosts are, so I am > not having connectivity issues. I am not going to alter that part of the > setup but I do need to add more networks, and I can not because I can > not save the configuration, no matter what I change it is not saved. > > Ovirtmgmt is vlan-tagged. > > Is there some config file that can be edited manually, or maybe it can > be done in the database? > > On 30.03.2015. 13:32, Dan Kenigsberg wrote: >> On Mon, Mar 30, 2015 at 12:15:09PM +0200, Bojan Popovic wrote: >>> Hello, I am having a strange issue in creating ovirtmgmt bridge over >>> vlan interface. >>> >>> I have set-up a bond from physical interfaces. On top of a bond there >>> are three VLANs one of which is in ovirtmgmt bridge. I have set it up >>> manually according to http://www.ovirt.org/Bonding_VLAN_Bridge >>> >>> Somehow the bond itself is also added to bridge in oVirt web interface, >>> after reboot there also were two added lines to configuration of that bond: >>> # Generated by VDSM version 4.16.10-8.gitc937927.el7 >>> BRIDGE=ovirtmgmt >>> >>> No matter how I try to remove the bond from the bridge it doesn't >>> succeed. If I edit the config files manually it isn't replicated to web >>> interface. If I try to detach it from web interface, I can only attach >>> bridge back to the bond interface. Of course configuration cannot be >>> saved until the bridge is attached to an interface. >>> >>> I have tried putting the host in maintenance mode, shutting down the >>> hosted engine and doing all the changes live. >>> >>> Anyone has a suggestion how to resolve this? >> I'd first like to understand how you intend for management traffic to >> travel from your Engine to the host. Do you have a vlan connection >> between the two? What is the host's IP address on that vlan? >> >> Since you have connectivity to the host, we can tell that you have >> un-tagged traffic to the host. In most (sane) cases, the IP address on >> the untagged network is different from the vlan'ed one. To use the >> latter, you'd need to remove the host from the cluster, and add it back >> with its second address. >> >> Did you define ovirtmgmt as a vlan-tagged network? Or do you intend to >> have a special hack for this host? >> >> Regards, >> Dan. > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt management network
I have a hosted engine. It is on the same VLAN as the hosts are, so I am not having connectivity issues. I am not going to alter that part of the setup but I do need to add more networks, and I can not because I can not save the configuration, no matter what I change it is not saved. Ovirtmgmt is vlan-tagged. Is there some config file that can be edited manually, or maybe it can be done in the database? On 30.03.2015. 13:32, Dan Kenigsberg wrote: > On Mon, Mar 30, 2015 at 12:15:09PM +0200, Bojan Popovic wrote: >> Hello, I am having a strange issue in creating ovirtmgmt bridge over >> vlan interface. >> >> I have set-up a bond from physical interfaces. On top of a bond there >> are three VLANs one of which is in ovirtmgmt bridge. I have set it up >> manually according to http://www.ovirt.org/Bonding_VLAN_Bridge >> >> Somehow the bond itself is also added to bridge in oVirt web interface, >> after reboot there also were two added lines to configuration of that bond: >> # Generated by VDSM version 4.16.10-8.gitc937927.el7 >> BRIDGE=ovirtmgmt >> >> No matter how I try to remove the bond from the bridge it doesn't >> succeed. If I edit the config files manually it isn't replicated to web >> interface. If I try to detach it from web interface, I can only attach >> bridge back to the bond interface. Of course configuration cannot be >> saved until the bridge is attached to an interface. >> >> I have tried putting the host in maintenance mode, shutting down the >> hosted engine and doing all the changes live. >> >> Anyone has a suggestion how to resolve this? > I'd first like to understand how you intend for management traffic to > travel from your Engine to the host. Do you have a vlan connection > between the two? What is the host's IP address on that vlan? > > Since you have connectivity to the host, we can tell that you have > un-tagged traffic to the host. In most (sane) cases, the IP address on > the untagged network is different from the vlan'ed one. To use the > latter, you'd need to remove the host from the cluster, and add it back > with its second address. > > Did you define ovirtmgmt as a vlan-tagged network? Or do you intend to > have a special hack for this host? > > Regards, > Dan. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt management network
I have enabled the VLAN tagging but no dice. Still I cannot attach logical network to the VLANS in oVirt, and I see them represented in the list, like this: namebond vlan Network nameaddress eth0bond0.50ovirtmgmt bond0 eth1bond0.60 ovirtmgmt - Also since ip address is added to a ovirtmgmt bridge, I can not save any additional configuration until I resolve this because it ovirt says that there are two interfaces with the same IP address. System-Email Mit freundlichen Grüßen / Best Regards Bojan Popovic System Administrator | IT Novi Sad Tel: +49 (0) 711/ 320 90 285 www.jago24.de <http://www.jago24.de> www.jago-ag.de <http://www.jago-ag.de> E-Mail: bojan.popo...@jago-ag.de <mailto:bojan.popo...@jago-ag.de> <http://www.jago24.de> JAGO AG Amtsgericht Stuttgart Ingersheimer Str.12 Reg.Nr.: HRB 741306 D-70499 Stuttgart USt-ID: DE283513307 Vorstand: WEEE-Reg.-Nr. DE 70299572 Goran Jakovac Aufsichtsratsvorsitzender: Dipl.-oec. Univ. Rolf Breyer Jago_AG_logo On 30.03.2015. 13:14, René Koch wrote: > > Hi Bojan, > > > > Did you configure a VLAN tag für your ovirtmgmt interface? > > You have to do this in „Data Centers“ – select dc – „Logical Networks“. > > Afterwards you should be able to configure network from oVirt webadmin > interface again. > > Don’t have a test setup with VLAN tags for ovirtmgmt atm, but did this > multiple times before… > > > > > Regards, > > René > > > > > > *Von:*users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] *Im > Auftrag von *Bojan Popovic > *Gesendet:* Montag, 30. März 2015 12:15 > *An:* users@ovirt.org > *Betreff:* [ovirt-users] oVirt management network > > > > Hello, I am having a strange issue in creating ovirtmgmt bridge over > vlan interface. > > I have set-up a bond from physical interfaces. On top of a bond there > are three VLANs one of which is in ovirtmgmt bridge. I have set it up > manually according to http://www.ovirt.org/Bonding_VLAN_Bridge > > Somehow the bond itself is also added to bridge in oVirt web > interface, after reboot there also were two added lines to > configuration of that bond: > # Generated by VDSM version 4.16.10-8.gitc937927.el7 > BRIDGE=ovirtmgmt > > No matter how I try to remove the bond from the bridge it doesn't > succeed. If I edit the config files manually it isn't replicated to > web interface. If I try to detach it from web interface, I can only > attach bridge back to the bond interface. Of course configuration > cannot be saved until the bridge is attached to an interface. > > I have tried putting the host in maintenance mode, shutting down the > hosted engine and doing all the changes live. > > Anyone has a suggestion how to resolve this? > > Thanks. > > > > > > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt management network
On Mon, Mar 30, 2015 at 12:15:09PM +0200, Bojan Popovic wrote: > Hello, I am having a strange issue in creating ovirtmgmt bridge over > vlan interface. > > I have set-up a bond from physical interfaces. On top of a bond there > are three VLANs one of which is in ovirtmgmt bridge. I have set it up > manually according to http://www.ovirt.org/Bonding_VLAN_Bridge > > Somehow the bond itself is also added to bridge in oVirt web interface, > after reboot there also were two added lines to configuration of that bond: > # Generated by VDSM version 4.16.10-8.gitc937927.el7 > BRIDGE=ovirtmgmt > > No matter how I try to remove the bond from the bridge it doesn't > succeed. If I edit the config files manually it isn't replicated to web > interface. If I try to detach it from web interface, I can only attach > bridge back to the bond interface. Of course configuration cannot be > saved until the bridge is attached to an interface. > > I have tried putting the host in maintenance mode, shutting down the > hosted engine and doing all the changes live. > > Anyone has a suggestion how to resolve this? I'd first like to understand how you intend for management traffic to travel from your Engine to the host. Do you have a vlan connection between the two? What is the host's IP address on that vlan? Since you have connectivity to the host, we can tell that you have un-tagged traffic to the host. In most (sane) cases, the IP address on the untagged network is different from the vlan'ed one. To use the latter, you'd need to remove the host from the cluster, and add it back with its second address. Did you define ovirtmgmt as a vlan-tagged network? Or do you intend to have a special hack for this host? Regards, Dan. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt management network
Hi Bojan, Did you configure a VLAN tag für your ovirtmgmt interface? You have to do this in „Data Centers“ – select dc – „Logical Networks“. Afterwards you should be able to configure network from oVirt webadmin interface again. Don’t have a test setup with VLAN tags for ovirtmgmt atm, but did this multiple times before… Regards, René Von: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] Im Auftrag von Bojan Popovic Gesendet: Montag, 30. März 2015 12:15 An: users@ovirt.org Betreff: [ovirt-users] oVirt management network Hello, I am having a strange issue in creating ovirtmgmt bridge over vlan interface. I have set-up a bond from physical interfaces. On top of a bond there are three VLANs one of which is in ovirtmgmt bridge. I have set it up manually according to http://www.ovirt.org/Bonding_VLAN_Bridge Somehow the bond itself is also added to bridge in oVirt web interface, after reboot there also were two added lines to configuration of that bond: # Generated by VDSM version 4.16.10-8.gitc937927.el7 BRIDGE=ovirtmgmt No matter how I try to remove the bond from the bridge it doesn't succeed. If I edit the config files manually it isn't replicated to web interface. If I try to detach it from web interface, I can only attach bridge back to the bond interface. Of course configuration cannot be saved until the bridge is attached to an interface. I have tried putting the host in maintenance mode, shutting down the hosted engine and doing all the changes live. Anyone has a suggestion how to resolve this? Thanks. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] oVirt management network
Hello, I am having a strange issue in creating ovirtmgmt bridge over vlan interface. I have set-up a bond from physical interfaces. On top of a bond there are three VLANs one of which is in ovirtmgmt bridge. I have set it up manually according to http://www.ovirt.org/Bonding_VLAN_Bridge Somehow the bond itself is also added to bridge in oVirt web interface, after reboot there also were two added lines to configuration of that bond: # Generated by VDSM version 4.16.10-8.gitc937927.el7 BRIDGE=ovirtmgmt No matter how I try to remove the bond from the bridge it doesn't succeed. If I edit the config files manually it isn't replicated to web interface. If I try to detach it from web interface, I can only attach bridge back to the bond interface. Of course configuration cannot be saved until the bridge is attached to an interface. I have tried putting the host in maintenance mode, shutting down the hosted engine and doing all the changes live. Anyone has a suggestion how to resolve this? Thanks. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users