[ovirt-users] Re: oVirt Node 4.1.1 Hosted Engine Deployment Fibre Channel No LUNS found
Update for all. The deployment finally detect the SAS collected storage. After manual compile the driver for the RAID control PCI card. 2020年8月8日土曜日 15:14:03 GMT+8、Strahil Nikolov via Users が書いたメール: Not when both client and server is the same node and you use "localhost:/nfs-share" Best Regards, Strahil Nikolov В събота, 8 август 2020 г., 05:56:10 Гринуич+3, Lao Dh написа: NFS utilize the network adapter, am I right? The LAN port max speed on the storage is just 100Mb/s. That's too slow for hosting VMs. Regards, Jeremy 2020年8月8日土曜日 2:15:08 GMT+8、Strahil Nikolov via Users が書いたメール: Do you have the option for POSIX compliant FS ? If not, I guess the simplest way is to setup NFS export that to be used for the engine. Best Regards, Strahil Nikolov На 7 август 2020 г. 15:59:55 GMT+03:00, Lao Dh via Users написа: >Hello Strahil,I follow the guide in "Installing oVirt as a self-hosted >engine using the Cockpit web interface". Only 1 host and 1 SAS storage. >Host and storage are direct attached. CentOS 8 was installed in host >local disk.Only 1 SAS cable connected. So I think shouldn't be the >issue of Multipath. > >Regards,Jeremy > > > > > >2020年8月7日金曜日 20:37:47 GMT+8、Strahil Nikolov >が書いたメール: > > Are you using the single-node wizard ? > >Best Regards, >Strahil Nikolov > >На 7 август 2020 г. 11:34:52 GMT+03:00, hkexdong--- via Users > написа: >>I've an external RAID subsystem connect to the host by SAS cable >>(SFF-8644). >>I follow the instructions of the RAID card manufacture. Include the >>driver during host installation. And I can see the created RAID >volumes >>(LUNs) available in "Installation Destination". Although I choose to >>install the engine in host local disk. >>The installation success and I proceed to hosted engine deployment by >>Cockpit. And now I stuck at part 4 Storage. >>I believe "Storage Type" select "Fibre Channel" is correct even I'm >not >>using fibre cable. As NFS and iSCSI are utilize network. >>I confirm there are 2 RAID volume (LUN0 & LUN1) created in the >external >>RAID subsystem. Why oVirt cannot discover them. What could be wrong :( >>___ >>Users mailing list -- users@ovirt.org >>To unsubscribe send an email to users-le...@ovirt.org >>Privacy Statement: https://www.ovirt.org/privacy-policy.html >>oVirt Code of Conduct: >>https://www.ovirt.org/community/about/community-guidelines/ >>List Archives: >>https://lists.ovirt.org/archives/list/users@ovirt.org/message/IIMW6VBS4JBL5WJFTS7AWDS5ENQDB63Y/ > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5WYU5SRXKGYDTTLA5WOMYZQULXP4OGLN/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZJMQOJLFRMQTN6DCESUYALRXKLZWG74R/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/PAZVRJJYZ5U52QW7SAIEGJGCQ4XY5QPJ/
[ovirt-users] Re: oVirt Node 4.1.1 Hosted Engine Deployment Fibre Channel No LUNS found
Not when both client and server is the same node and you use "localhost:/nfs-share" Best Regards, Strahil Nikolov В събота, 8 август 2020 г., 05:56:10 Гринуич+3, Lao Dh написа: NFS utilize the network adapter, am I right? The LAN port max speed on the storage is just 100Mb/s. That's too slow for hosting VMs. Regards, Jeremy 2020年8月8日土曜日 2:15:08 GMT+8、Strahil Nikolov via Users が書いたメール: Do you have the option for POSIX compliant FS ? If not, I guess the simplest way is to setup NFS export that to be used for the engine. Best Regards, Strahil Nikolov На 7 август 2020 г. 15:59:55 GMT+03:00, Lao Dh via Users написа: >Hello Strahil,I follow the guide in "Installing oVirt as a self-hosted >engine using the Cockpit web interface". Only 1 host and 1 SAS storage. >Host and storage are direct attached. CentOS 8 was installed in host >local disk.Only 1 SAS cable connected. So I think shouldn't be the >issue of Multipath. > >Regards,Jeremy > > > > > >2020年8月7日金曜日 20:37:47 GMT+8、Strahil Nikolov >が書いたメール: > > Are you using the single-node wizard ? > >Best Regards, >Strahil Nikolov > >На 7 август 2020 г. 11:34:52 GMT+03:00, hkexdong--- via Users > написа: >>I've an external RAID subsystem connect to the host by SAS cable >>(SFF-8644). >>I follow the instructions of the RAID card manufacture. Include the >>driver during host installation. And I can see the created RAID >volumes >>(LUNs) available in "Installation Destination". Although I choose to >>install the engine in host local disk. >>The installation success and I proceed to hosted engine deployment by >>Cockpit. And now I stuck at part 4 Storage. >>I believe "Storage Type" select "Fibre Channel" is correct even I'm >not >>using fibre cable. As NFS and iSCSI are utilize network. >>I confirm there are 2 RAID volume (LUN0 & LUN1) created in the >external >>RAID subsystem. Why oVirt cannot discover them. What could be wrong :( >>___ >>Users mailing list -- users@ovirt.org >>To unsubscribe send an email to users-le...@ovirt.org >>Privacy Statement: https://www.ovirt.org/privacy-policy.html >>oVirt Code of Conduct: >>https://www.ovirt.org/community/about/community-guidelines/ >>List Archives: >>https://lists.ovirt.org/archives/list/users@ovirt.org/message/IIMW6VBS4JBL5WJFTS7AWDS5ENQDB63Y/ > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5WYU5SRXKGYDTTLA5WOMYZQULXP4OGLN/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZJMQOJLFRMQTN6DCESUYALRXKLZWG74R/
[ovirt-users] Re: oVirt Node 4.1.1 Hosted Engine Deployment Fibre Channel No LUNS found
NFS utilize the network adapter, am I right? The LAN port max speed on the storage is just 100Mb/s. That's too slow for hosting VMs. Regards,Jeremy 2020年8月8日土曜日 2:15:08 GMT+8、Strahil Nikolov via Users が書いたメール: Do you have the option for POSIX compliant FS ? If not, I guess the simplest way is to setup NFS export that to be used for the engine. Best Regards, Strahil Nikolov На 7 август 2020 г. 15:59:55 GMT+03:00, Lao Dh via Users написа: >Hello Strahil,I follow the guide in "Installing oVirt as a self-hosted >engine using the Cockpit web interface". Only 1 host and 1 SAS storage. >Host and storage are direct attached. CentOS 8 was installed in host >local disk.Only 1 SAS cable connected. So I think shouldn't be the >issue of Multipath. > >Regards,Jeremy > > > > > >2020年8月7日金曜日 20:37:47 GMT+8、Strahil Nikolov >が書いたメール: > > Are you using the single-node wizard ? > >Best Regards, >Strahil Nikolov > >На 7 август 2020 г. 11:34:52 GMT+03:00, hkexdong--- via Users > написа: >>I've an external RAID subsystem connect to the host by SAS cable >>(SFF-8644). >>I follow the instructions of the RAID card manufacture. Include the >>driver during host installation. And I can see the created RAID >volumes >>(LUNs) available in "Installation Destination". Although I choose to >>install the engine in host local disk. >>The installation success and I proceed to hosted engine deployment by >>Cockpit. And now I stuck at part 4 Storage. >>I believe "Storage Type" select "Fibre Channel" is correct even I'm >not >>using fibre cable. As NFS and iSCSI are utilize network. >>I confirm there are 2 RAID volume (LUN0 & LUN1) created in the >external >>RAID subsystem. Why oVirt cannot discover them. What could be wrong :( >>___ >>Users mailing list -- users@ovirt.org >>To unsubscribe send an email to users-le...@ovirt.org >>Privacy Statement: https://www.ovirt.org/privacy-policy.html >>oVirt Code of Conduct: >>https://www.ovirt.org/community/about/community-guidelines/ >>List Archives: >>https://lists.ovirt.org/archives/list/users@ovirt.org/message/IIMW6VBS4JBL5WJFTS7AWDS5ENQDB63Y/ > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5WYU5SRXKGYDTTLA5WOMYZQULXP4OGLN/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/TITOLTY5YV5BRN63ZUVRM22YJ2MSKZXF/
[ovirt-users] Re: oVirt Node 4.1.1 Hosted Engine Deployment Fibre Channel No LUNS found
Do you have the option for POSIX compliant FS ? If not, I guess the simplest way is to setup NFS export that to be used for the engine. Best Regards, Strahil Nikolov На 7 август 2020 г. 15:59:55 GMT+03:00, Lao Dh via Users написа: >Hello Strahil,I follow the guide in "Installing oVirt as a self-hosted >engine using the Cockpit web interface". Only 1 host and 1 SAS storage. >Host and storage are direct attached. CentOS 8 was installed in host >local disk.Only 1 SAS cable connected. So I think shouldn't be the >issue of Multipath. > >Regards,Jeremy > > > > > >2020年8月7日金曜日 20:37:47 GMT+8、Strahil Nikolov >が書いたメール: > > Are you using the single-node wizard ? > >Best Regards, >Strahil Nikolov > >На 7 август 2020 г. 11:34:52 GMT+03:00, hkexdong--- via Users > написа: >>I've an external RAID subsystem connect to the host by SAS cable >>(SFF-8644). >>I follow the instructions of the RAID card manufacture. Include the >>driver during host installation. And I can see the created RAID >volumes >>(LUNs) available in "Installation Destination". Although I choose to >>install the engine in host local disk. >>The installation success and I proceed to hosted engine deployment by >>Cockpit. And now I stuck at part 4 Storage. >>I believe "Storage Type" select "Fibre Channel" is correct even I'm >not >>using fibre cable. As NFS and iSCSI are utilize network. >>I confirm there are 2 RAID volume (LUN0 & LUN1) created in the >external >>RAID subsystem. Why oVirt cannot discover them. What could be wrong :( >>___ >>Users mailing list -- users@ovirt.org >>To unsubscribe send an email to users-le...@ovirt.org >>Privacy Statement: https://www.ovirt.org/privacy-policy.html >>oVirt Code of Conduct: >>https://www.ovirt.org/community/about/community-guidelines/ >>List Archives: >>https://lists.ovirt.org/archives/list/users@ovirt.org/message/IIMW6VBS4JBL5WJFTS7AWDS5ENQDB63Y/ > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5WYU5SRXKGYDTTLA5WOMYZQULXP4OGLN/
[ovirt-users] Re: oVirt Node 4.1.1 Hosted Engine Deployment Fibre Channel No LUNS found
Hello Strahil,I follow the guide in "Installing oVirt as a self-hosted engine using the Cockpit web interface". Only 1 host and 1 SAS storage. Host and storage are direct attached. CentOS 8 was installed in host local disk.Only 1 SAS cable connected. So I think shouldn't be the issue of Multipath. Regards,Jeremy 2020年8月7日金曜日 20:37:47 GMT+8、Strahil Nikolov が書いたメール: Are you using the single-node wizard ? Best Regards, Strahil Nikolov На 7 август 2020 г. 11:34:52 GMT+03:00, hkexdong--- via Users написа: >I've an external RAID subsystem connect to the host by SAS cable >(SFF-8644). >I follow the instructions of the RAID card manufacture. Include the >driver during host installation. And I can see the created RAID volumes >(LUNs) available in "Installation Destination". Although I choose to >install the engine in host local disk. >The installation success and I proceed to hosted engine deployment by >Cockpit. And now I stuck at part 4 Storage. >I believe "Storage Type" select "Fibre Channel" is correct even I'm not >using fibre cable. As NFS and iSCSI are utilize network. >I confirm there are 2 RAID volume (LUN0 & LUN1) created in the external >RAID subsystem. Why oVirt cannot discover them. What could be wrong :( >___ >Users mailing list -- users@ovirt.org >To unsubscribe send an email to users-le...@ovirt.org >Privacy Statement: https://www.ovirt.org/privacy-policy.html >oVirt Code of Conduct: >https://www.ovirt.org/community/about/community-guidelines/ >List Archives: >https://lists.ovirt.org/archives/list/users@ovirt.org/message/IIMW6VBS4JBL5WJFTS7AWDS5ENQDB63Y/ > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/KVSZ7BGMGKLYAQSSAEXJB5GOZRNYVBQ4/
[ovirt-users] Re: oVirt Node 4.1.1 Hosted Engine Deployment Fibre Channel No LUNS found
Are you using the single-node wizard ? Best Regards, Strahil Nikolov На 7 август 2020 г. 11:34:52 GMT+03:00, hkexdong--- via Users написа: >I've an external RAID subsystem connect to the host by SAS cable >(SFF-8644). >I follow the instructions of the RAID card manufacture. Include the >driver during host installation. And I can see the created RAID volumes >(LUNs) available in "Installation Destination". Although I choose to >install the engine in host local disk. >The installation success and I proceed to hosted engine deployment by >Cockpit. And now I stuck at part 4 Storage. >I believe "Storage Type" select "Fibre Channel" is correct even I'm not >using fibre cable. As NFS and iSCSI are utilize network. >I confirm there are 2 RAID volume (LUN0 & LUN1) created in the external >RAID subsystem. Why oVirt cannot discover them. What could be wrong :( >___ >Users mailing list -- users@ovirt.org >To unsubscribe send an email to users-le...@ovirt.org >Privacy Statement: https://www.ovirt.org/privacy-policy.html >oVirt Code of Conduct: >https://www.ovirt.org/community/about/community-guidelines/ >List Archives: >https://lists.ovirt.org/archives/list/users@ovirt.org/message/IIMW6VBS4JBL5WJFTS7AWDS5ENQDB63Y/ ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/REXL3ZWSQXABBO5ALG6CTYJHEHSY4RFD/
