I think he means SPM? I've seen when node with SPM goes down it isn't
really seamless and takes a minute or two to catch up unless of course you
out that node in maintenance mode but that isn't possible if it crashes or
something
On Apr 15, 2017 1:38 PM, "FERNANDO FREDIANI"
wrote:
> Hello Konsta
I couldnt find a definitive on this so I would like to inquire here
I have gluster on my storage backend exporting the volume from a single
node via NFS
I have a DC of 4.0 and I would like to upgrade to 4.1. I would ideally like
to take one node out of the cluster and build a 4.1 datacenter. Then
t; Why is an export domain better than detach and attach a storage domain?
> Y.
>
>
>>
>> On Wed, May 31, 2017 at 4:08 PM, Charles Kozler
>> wrote:
>>
>>> I couldnt find a definitive on this so I would like to inquire here
>>>
>>> I have gl
Hello -
I have successfully created a hyperconverged hosted engine setup consisting
of 3 nodes - 2 for VM's and the third purely for storage. I manually
configured it all, did not use ovirt node or anything. Built the gluster
volumes myself
However, I noticed that when setting up the hosted engin
p-volfile-servers="h1:h2" and if one
> of the gluster node goes down engine uses this parameter to provide ha /
> failover.
>
> Hope this helps !!
>
> Thanks
> kasturi
>
>
>
> On Wed, Aug 30, 2017 at 8:09 PM, Charles Kozler
> wrote:
>
>> Hel
Hello,
I recently installed ovirt cluster on 3 nodes and saw that I could only
migrate one way
Reviewing the logs I found this
2017-08-31 09:04:30,685-0400 ERROR (migsrc/1eca84bd) [virt.vm]
(vmId='1eca84bd-2796-469d-a071-6ba2b21d82f4') unsupported configuration:
Unable to find security driver fo
cted environment of ovirt is. It would be helpful to
have some checks along the way for this condition if its a blocker for
functions
On Thu, Aug 31, 2017 at 9:09 AM, Charles Kozler
wrote:
> Hello,
>
> I recently installed ovirt cluster on 3 nodes and saw that I could only
> migrate o
>
> [1] 'mnt_options=backup-volfile-servers=:'
>
> On Thu, Aug 31, 2017 at 5:54 PM, Charles Kozler
> wrote:
>
>> Hi Kasturi -
>>
>> Thanks for feedback
>>
>> > If cockpit+gdeploy plugin would be have been used then that would have
>>
hu, Aug 31, 2017 at 3:30 PM, Charles Kozler
wrote:
> So I've tested this today and I failed a node. Specifically, I setup a
> glusterfs domain and selected "host to use: node1". Set it up and then
> failed that VM
>
> However, this did not work and the datacenter went
today where 192.168.8.11 went down. ALL VMs immediately
>> paused, including the engine (all VMs were running on host2:192.168.8.12).
>> I couldn't get any gluster stuff working until host1 (192.168.8.11) was
>> restored.
>>
>> What's wrong / what did I miss
ode1:/data.
> What about the backup-volfile-servers option in the UI while configuring
> storage domain? Are you specifying that too?
>
> Thanks
> kasturi
>
>
> On Fri, Sep 1, 2017 at 5:52 PM, Charles Kozler
> wrote:
>
>> @ Jim - you have only two data volumes and l
keep the array online and
> functional.
>
> --Jim
>
> On Fri, Sep 1, 2017 at 5:22 AM, Charles Kozler
> wrote:
>
>> @ Jim - you have only two data volumes and lost quorum. Arbitrator only
>> stores metadata, no actual files. So yes, you were running in degraded mod
e.readdir-ahead: on
>> server.allow-insecure: on
>> [root@ovirt1 ~]#
>>
>>
>> all 3 of my brick nodes ARE also members of the virtualization cluster
>> (including ovirt3). How can I convert it into a full replica instead of
>> just an arbiter?
>>
>
making it a
> full replica.
>
> Did I miss something here?
>
> Thanks!
>
> On Fri, Sep 1, 2017 at 11:59 AM, Charles Kozler
> wrote:
>
>> These can get a little confusing but this explains it best:
>> https://gluster.readthedocs.io/en/latest/Administr
t; The "used managed gluster" checkbox is NOT checked, and if I check it and
> save settings, next time I go in it is not checked.
>
> --Jim
>
> On Fri, Sep 1, 2017 at 2:08 PM, Charles Kozler
> wrote:
>
>> @ Jim - here is my setup which I will test in a few
end, will follow up with that test
On Fri, Sep 1, 2017 at 7:20 PM, Charles Kozler wrote:
> Jim -
>
> here is my test:
>
> - All VM's on node2: hosted engine and 1 test VM
> - Test VM on gluster storage domain (with mount options set)
> - hosted engine is on gluster
orts
On Fri, Sep 1, 2017 at 7:38 PM, Charles Kozler wrote:
> Jim -
>
> One thing I noticed is that, by accident, I used
> 'backupvolfile-server=node2:node3' which is apparently a supported
> setting. It would appear, by reading the man page of mount.glusterfs, the
>
Interestingly enough I literally just went through this same thing with a
slight variation.
Note to the below: I am not sure if this would be considerd best practice
or good for something long term support but I made due with what I had
I had 10Gb cards for my storage network but no 10Gb switch,
Ovirt & KVM.
>>4. To deploy ovirt engine VM, what kind of configuration I'll have to
>>do on network adaptors? (eg. just configure IP on physical network or have
>>to create br0 for it.)
>>5. Can I make multiple VM networks for vlan configuration?
>
(kinda
> like the parity drive for a RAID-4 array). I was also under the impression
> that one replica + Arbitrator is enough to keep the array online and
> functional.
>
> --Jim
>
> On Fri, Sep 1, 2017 at 5:22 AM, Charles Kozler
> wrote:
>
>> @ Jim - you have
p 12, 2017 at 7:04 PM, Charles Kozler
wrote:
> Hey All -
>
> So I havent tested this yet but what I do know is that I did setup
> backupvol option when I added the data gluster volume, however, mount
> options on mount -l do not show it as being used
>
> n1:/data on /rhev/dat
Hello -
I had setup my server somewhat before installing ovirt. I left em1 alone
for the ovirtmgmt but I had bonded two NICs on a separate card and named it
storage0 and storage1 accordingly.
Everything setup fine and when I went to add more networks for em3+em4 in
LACP named bond0, the web UI wo
I received an alert from OSSEC HIDS that a package was installed at 00:59.
Nobody uses this infrastructure but me
Upon investigation I find this
Sep 14 00:59:18 ovirthost1 sshd[93263]: Accepted publickey for root from
10.0.16.50 port 50197 ssh2: RSA
1c:fc:0d:b8:40:2c:bf:87:f7:8f:b2:52:0b:c4:f6:4d
You could, I believe, turn off auto-negotiation and set it 1G full duplex
on both sides and then add the links in and then remove the old 1G's when
ready then remove auto-negotiation from the 10G
But, it would ultimately be much, much easier to create a new LAG and then
take an outage on ovirt and
Sorry, I meant "remove the static configuration of 1G full duplex and set
back to auto-negotiation to the 10G when ready"
On Thu, Sep 14, 2017 at 6:19 PM, Charles Kozler
wrote:
> You could, I believe, turn off auto-negotiation and set it 1G full duplex
> on both sides and then
, Charles Kozler
wrote:
> I received an alert from OSSEC HIDS that a package was installed at 00:59.
> Nobody uses this infrastructure but me
>
> Upon investigation I find this
>
> Sep 14 00:59:18 ovirthost1 sshd[93263]: Accepted publickey for root from
> 10.0.16.50 port
I have tried this multiple times
I imported glance image latest centos 7 as a template. Made a VM from it
and rebooted it multiple times testing some apps. Reboot was always 30
seconds or less
I did a full yum update and then reboot
on reboot I am hung up at "[drm] initalized qxl 0.1.0 20120117
from boot I still get a brief hang on qxl but its about 5-10 seconds
then goes to login
Where can I follow up on reporting issues with glance images?
On Fri, Sep 15, 2017 at 11:57 PM, Charles Kozler
wrote:
> I have tried this multiple times
>
> I imported glance image latest cent
Thanks for confirming
On Sun, Sep 17, 2017 at 11:05 AM, Christopher Cox
wrote:
> On 09/17/2017 02:00 AM, Yedidyah Bar David wrote:
>
>> On Fri, Sep 15, 2017 at 5:12 PM, Charles Kozler
>> wrote:
>>
>>> Hello -
>>>
>>> Can anyone just
Yedidyah - yes, update would be best of course. I've had this HIDS running
for a little over a year or so and never saw this before so was a little
weary
On Sun, Sep 17, 2017 at 3:00 AM, Yedidyah Bar David wrote:
> On Fri, Sep 15, 2017 at 5:12 PM, Charles Kozler
> wrote
Hello,
I have seen mixed results for this search on this list so I'd like to clear
it up
I have a VM that I need to configure with a trunk port so that all of my
VLANs can be configured on it but not as separate NICs (eth0, eth1, eth2,
etc)
I have seen on this list about a year ago someone said
https://www.ovirt.org/community/user-stories/users-and-providers/
BobCares is based out of India, so know that. They seemed responsive and
helpful and eager for business and generally knowledgeable in initial talks
I'd recommend you check out CornerStone. They are states local (I think NC
or SC)
So I tried to set this up. I configured an untagged network and attached it
to all of my hosts. I setup a VM and correctly setup a trunk port but no
traffic is passed
Can anyone assist?
On Wed, Sep 20, 2017 at 9:09 AM, Charles Kozler
wrote:
> Hello,
>
> I have seen mixed results
t; Are you using DNS for host names or /etc/hosts
>>>>>>>
>>>>>>> I personally place the engines hostname with ip address in
>>>>>>> /etc/hosts on all the hypervisors in case my DNS services go down.
>>>>>>> I also put the
Hello,
I recently read on this list from a redhat member that export domain is
either being deprecated or looking at being deprecated
To that end, can you share details? Can you share any notes/postings/bz's
that document this? I would imagine something like this would be discussed
in larger audi
Thank you for clearing this up for me everyone. My concern that something
like the export domain wasnt going to exist and it was just going to be
deprecated with no alternative. Glad to hear all the news of the SD
On Mon, Oct 2, 2017 at 8:31 AM, Pavel Gashev wrote:
> Maor,
>
> Could you please c
I did a 3.6 to 4.1 like this. I moved all of my VMs to a new storage domain
(the other was hyperconverged gluster) and then took a full outage, shut
down all of my VMs, detached from 3.6, and imported on 4.1. I had no issues
other than expected mac address changes, but I think you can manually
over
I believe you would accomplish this by setting a VM to be highly available
(like the engine). Then engine makes sure this VM is up on at least one
node through lease agreements (IIRC). In either case, I think this is what
you want
On Wed, Oct 4, 2017 at 10:25 AM, Chris Adams wrote:
> I have an o
Most answers reside in the agent.log under /var/log/hosted-engine-ha/. Tail
that for a bit and see what pops up. You can also review vdsm log under
/var/log
I've found that looking at these two logs and just trying a few things
yields results
On Sat, Oct 7, 2017 at 5:18 PM, Wesley Stewart wrote:
hello,
What would be the process to go from current 4.1 to 4.2-pre?
I have been demoing 4.2 on my own lab environment and the WebUI, for my
user base, is entirely more intuitive than the previous
My 4.1 is relatively new so there isnt much config done to it, that said,
wondering what it would ta
You might be better off rebuilding. It shouldnt be that hard albeit
slightly time consuming. Is this a production environment or is it a
lab/test area?
Two possible ways for this, I think...
1.) Not sure if HE will use it but if you right click on the HostedEngine
VM in the web UI and click edit,
ch
ovirt-host-deploy-1.3.2-1.el6.noarch
--
*Charles Kozler*
*Vice President, IT Operations*
FIX Flyer, LLC
225 Broadway | Suite 1600 | New York, NY 10007
1-888-349-3593
http://www.fixflyer.com <http://fixflyer.com>
NOTICE TO RECIPIENT: THIS E-MAIL IS MEANT ONLY FOR THE INTENDED
RECIPI
59 PM, Nir Soffer wrote:
> On Fri, Jan 22, 2016 at 9:25 PM, Charles Kozler
> wrote:
> > Here is a screenshot of my three nodes and their increased memory usage
> over
> > 30 days. Note that node #2 had 1 single VM that had 4GB of RAM assigned
> to
> > it. I
6 at 11:08 PM, Charles Kozler
> wrote:
> > Hi Nir -
> >
> > Thanks for getting back to me. Will the patch to 3.6 be backported to
> 3.5?
>
> We plan to include them in 3.5.8.
>
> > As you can tell from the images, it takes days and days for it to
> increase
>
Bonazzola
wrote:
>
> Il 22/Gen/2016 22:31, "Charles Kozler" ha scritto:
> >
> > Hi Nir -
> >
> > do you have a release target date for 3.5.8? Any estimate would help.
> >
>
> There won't be any supported release after 3.5.6. Please upda
:40 AM, "Sandro Bonazzola" wrote:
>
>
> On Fri, Jan 22, 2016 at 10:53 PM, Charles Kozler
> wrote:
>
>> Sandro -
>>
>> Do you have available documentation that can support upgrading self
>> hosted? I followed this
>> http://community.red
you!
On Sat, Jan 23, 2016 at 12:55 AM, Charles Kozler
wrote:
> Thanks Sandro. Should clarify my storage is external on a redundant SAN.
> The steps I was concerned about was the actual upgrade. I tried to upgrade
> before and it brought my entire stack crumbling down so I'm hesita
1, 2016 12:30 PM, "Simone Tiraboschi" wrote:
>
>
> On Mon, Feb 1, 2016 at 5:40 PM, Charles Kozler
> wrote:
>
>> Sandro / Nir -
>>
>> I followed your steps plus
>>
>> http://www.ovirt.org/OVirt_3.6_Release_Notes#Fedora_.2F_CentOS_.2F
So I will still have the memory leak?
On Feb 1, 2016 12:39 PM, "Simone Tiraboschi" wrote:
>
>
> On Mon, Feb 1, 2016 at 6:33 PM, Charles Kozler
> wrote:
>
>> So what about the bug that I hit for vdsm as listed above by Nir? Will I
>> have that patch to avoi
Sorry to be clear..the only way to resolve the memory leak I am facing now
is to upgrade to el7?
Also the engine can stay running on el6 yes? I successfully upgraded my
engine to ovirt 3.6 in el6. Do I need to make my engine vm el7 too?
On Feb 1, 2016 12:49 PM, "Charles Kozler" wrot
b 1, 2016 at 7:52 PM, Charles Kozler
> wrote:
> > Sorry to be clear..the only way to resolve the memory leak I am facing
> now
> > is to upgrade to el7?
>
> If you want to use official packages, yes.
>
> But this is free software, so *you* are free to build your own
gine along side the EL6's while I
migrate and upgrade?or should I just restart from scratch?
On Mon, Feb 1, 2016 at 3:14 PM, Charles Kozler wrote:
> Thank you. I am in the process of upgrading my nodes to 7 although since
> the upgrade of my engine to ovirt 3.6 the network on the VM its
iew any of the data actually there unless it
creates it itself
How can I restore an rsync backup of a storage domain? I am feeling like
there isnt a way to readily do it so if not, how can I restore these backed
up images?
--
*Charles Kozler*
*Vice President, IT Operations*
FIX Flyer, LLC
22
t;
> [1] http://www.ovirt.org/Features/ImportStorageDomain
>
> On Tue, Feb 2, 2016 at 3:25 PM, Charles Kozler
> wrote:
>
>> Say I have backed up a storage domain to another NFS. I now want to
>> restore that backup. What would be the best method to restore all the disk
&g
Source was ovirt 3.5. Now using ovirt 3.6 on a new cluster
On Feb 2, 2016 12:16 PM, "Joop" wrote:
> On 2-2-2016 15:30, Charles Kozler wrote:
>
> I did read that but that doc doesnt seem to have any real actionable
> items. It seems more like a design spec rather than a wal
But to add to that I've tried 3.5 to 3.5 and I received the same issue
On Feb 2, 2016 12:29 PM, char...@fixflyer.com wrote:
> Source was ovirt 3.5. Now using ovirt 3.6 on a new cluster
> On Feb 2, 2016 12:16 PM, "Joop" wrote:
>
>> On 2-2-2016 15:30, Charles Kozle
Using a hosted engine on 3.6 and I deleted a host I recently added but the
system is still showing up in hosted-engine --vm-status
How can I ensure this system is fully deleted?
--
*Charles Kozler*
*Vice President, IT Operations*
FIX Flyer, LLC
225 Broadway | Suite 1600 | New York, NY 10007
1
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
--
*Charles Kozler*
*Vice President, IT Operations*
FIX Flyer, LLC
225 Broadway | Suite 1600 | New York, NY 10007
1-888-349-3593
http://www.fixflyer.com <http://fixflyer.com&
, Joe DiTommasso wrote:
> If you mouse over the exclamation mark, you should get a tooltip that
> tells you what it's complaining about. I've got it on pretty much all my
> VMs, it's an issue with the timezone for me.
>
> On Thu, Feb 4, 2016 at 10:41 AM, Charles Kozler
>
-
> *From:* users-boun...@ovirt.org on behalf of
> Charles Kozler
> *Sent:* Thursday, February 4, 2016 7:46 AM
> *To:* Joe DiTommasso
> *Cc:* users
> *Subject:* Re: [ovirt-users] Dumb question: exclamation mark next to VM?
>
> You cant see my mouse (becau
-4252-96d9-9ecbb7c2a603
0
./1c3129dc-56fa-4e41-bd5b-3313f9f1aa86/d4221e11-bf3b-4226-a8a8-b53ff0189592
21G total
How can I find out what VMs these belong to?
--
*Charles Kozler*
*Vice President, IT Operations*
FIX Flyer, LLC
225 Broadway | Suite 1600 | New York, NY 10007
1-888-349-3593
http
t; ---
>
> Sent from my Nexus 5
> On Feb 5, 2016 04:30, "Nicolas Ecarnot" wrote:
>
>> Le 04/02/2016 18:09, Charles Kozler a écrit :
>>
>>> Matt -
>>>
>>> Same issue here!
>>>
>>
>> +1
>>
>> --
>> Ni
s that the ovirtmgmt network is connected to
This causes a problem because the inbound checks from the nodes fails (I
guess you use ICMP?) and then it starts to enter a constant flap state
where the engine keeps migrating around
--
*Charles Kozler*
*Vice President, IT Operations*
FIX Flyer, LLC
22
domain-id :
> 75801b3b-d9ce-4b62-aa36-6b6519ecc04e
> storage_type: image
> vm-id :
> 8f163624-823f-4ac2-8964-7aa473c41de2
> wipe_after_delete : False
>
> Where id is the directory name, and image_id is th
:
>>> 75801b3b-d9ce-4b62-aa36-6b6519ecc04e
>>> storage_type: image
>>> vm-id :
>>> 8f163624-823f-4ac2-8964-7aa473c41de2
>>> wipe_after_delete : False
&
, what are some pre-reqs needed to get it working?
Also, what are the benefits of using this? I was looking at it for the
eratta information
Thanks!
--
*Charles Kozler*
*Vice President, IT Operations*
FIX Flyer, LLC
225 Broadway | Suite 1600 | New York, NY 10007
1-888-349-3593
http
ce-3.6-20160126.1.el7.centos.noarch exists on
node 1 but not on node 2 or 3. Could this be relative? I dont recall
installing that specifically on node 1 but I may have
Been slamming my head on this so I am hoping you can provide some assistance
http://imgur.com/a/6xkaS
Thanks!
--
*Charles Koz
ing it down and
bringing it up manually on node 2 via hosted-engine --vm-start
On Jun 11, 2016 2:53 PM, "Charles Kozler" wrote:
> See linked images please. As you can see all three nodes are reporting
> stale data. The results of this are:
>
> 1. Not all VM's migrate seam
irst is
> to check VM is really up.
> In my issues, VM was shown by hosted-engine command as up, but was down.
> with vdsClient command, you can check if it's status with more details.
>
> What is the result for you of the following command ?
>
> vdsClient -s 0 list
>
7;propagateErrors': 'off', 'name': 'vda', 'bootOrder': '1', 'volumeID':
'aa66d378-5a5f-490c-b0ab-993b79838d95', 'alias': 'virtio-disk0',
'volumeChain': [{'domainID': 'c6323975
t;
>
> Best regards
>
> --
> Martin Sivak
> SLA / oVirt
>
> On Sat, Jun 11, 2016 at 8:53 PM, Charles Kozler
> wrote:
> > See linked images please. As you can see all three nodes are reporting
> stale
> > data. The results of this are:
> >
> &g
___
>> Users mailing
>> listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
>>
>>
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lis
ather than 'stale data'. But I dont know engine internals
>
> This is another piece that points to broker or storage issues. Agent
> collects local data and then publishes them to other nodes through
> broker. So it is possible for the agent to know the status of the VM
> loc
tor::99::ovirt_hosted_engine_ha.broker.monitor.Monitor::(stop_submonitor)
Stopped submonitor engine-health, id 140681926011984
On Wed, Jun 15, 2016 at 10:04 AM, Martin Sivak wrote:
> Charles, check the broker log too please. It is possible that the
> broker process is running, but
6-06-15
>
> and connection timeout between agent and broker.
>
> > Thread-482175::INFO::2016-06-14
> >
> 12:59:30,429::storage_backends::120::ovirt_hosted_engine_ha.lib.storage_backends::(_check_symlinks)
> > Cleaning up stale LV link
> '/rhev/data-center/mnt/nas01:_v
Hi - I followed this doc successfully
https://www.ovirt.org/documentation/how-to/hosted-engine/ with no real
issues
In oVirt I have the hosted_storage storage domain and the one I created
(Datastore_VM_NFS) to be a master domain - this is all fine
My hosted_storage domain is on a SAN that is bein
This usually happens when SPM falls off or master storage domain was
unreachable for a brief period of time in some capacity. Your logs should
say something about an underlying storage problem so oVirt offlined or
paused the VMs to avoid problems. I'd check the pathway to your master
storage domain
Hi Everyone - can anyone assist me? I'd really like to move HE off of the
location it is right now without having to rebuild my entire datacenter. Is
there anything I can do? Any documentation you can point me to? Thanks!
On Sun, Aug 14, 2016 at 2:51 PM, Charles Kozler
wrote:
> Hi - I
I have my entire cluster running on oVirt 4. As updates become available,
what is the correct method to upgrade within the same major version?
My initial thought is:
1. From oVirt web update my individual nodes that are marked as "a new
version is available"
2. Logon to oVirt web through SSH and
Googling "ovirt windows agent" this is the first link that pops up:
http://www.ovirt.org/documentation/internal/guest-agent/guest-agent-for-windows/
This doc seems non-intuitive and over complicated
Specifically, the RedHat documentation that is 4 links below is simple as
"install this package an
Possibly stupid question but are you doing this on a base empty centos/rhel
7?
On Oct 9, 2016 9:48 PM, "David Pinkerton" wrote:
>
> I've spent the weekend trying to get to the bottom of this issue.
>
> Adding a Host fails:
>
> From RHVM
>
>
> VDSM rhv1 command failed: Connection reset by peer
>
oVirt is the upstream source project for RedHat Enterprise Virtualization
(RHEV). As expected, its only supported on CentOS 7 (and older versions on
6)
On Thu, Oct 20, 2016 at 6:46 PM, Jon Forrest
wrote:
> I've done some looking around to find the status of oVirt running on
> Ubuntu 14.04 and la
On Thu, Oct 20, 2016 at 7:22 PM, Jon Forrest
wrote:
>
>
> On 10/20/16 4:11 PM, Charles Kozler wrote:
>
>> oVirt is the upstream source project for RedHat Enterprise
>> Virtualization (RHEV). As expected, its only supported on CentOS 7 (and
>> older versions on 6
Hey Fernando -
I've had success using OCFS2 with both oVirt and Xen although you still
need something to replicate the blocks and this is where DRBD comes in. The
premise was simple - configured two DRBD devices and then setup OCFS2 as
desired (very straight forward vs comparatively to GFS2). Star
What I've been doing since oVirt 4 is just configuring one NIC manually
when I provision the server (eg: eth0, em1, etc) and then let oVirt do the
bridge setup. Once the engine is up I login to the UI and I use it to bond
the NICs in whatever fashion I need (LACP or active-backup). Any time I
tried
.
On Mon, Nov 28, 2016 at 9:43 AM, Simone Tiraboschi
wrote:
>
>
> On Mon, Nov 28, 2016 at 3:42 PM, Charles Kozler
> wrote:
>
>> What I've been doing since oVirt 4 is just configuring one NIC manually
>> when I provision the server (eg: eth0, em1, etc) and then
, wrote:
> Thanks for your responses but the ui is not an option for me as i am
> dealing with loads of systems.
> in 3.5 ovirt used to just accept the bridge as it was and incorporate it,
> i am just wondering if i am facing a bug or a feature at the moment.
>
>
> Charles Kozl
I put the node in to maint. mode, removed all VMs from it, and then deleted
it from the web UI. I then rebuilt it with hosted-engine --deploy and
indicated it is now node 4 (was previously #3) and now in --vm-status it is
still showing up as stale data
What can I do?
In fact, it looks like ovirt
I am facing the same issue here as well. The engine comes up and web UI is
reachable. Initial login takes about 6 minutes to finally let me in and
then once I am in under the events tab there is events for "storage domain
does not exist" yet they are all there. After this comes
'reconstructing mas
Hi -
I am wondering why OSSEC would be reporting hidden processes on my ovirt
nodes? I run OSSEC across the infrastructure and multiple ovirt clusters
have assorted nodes that will report a process is running but does not have
an entry in /proc and thus "possible rootkit" alert is fired
I am well
:10 AM, Yedidyah Bar David wrote:
> On Mon, Mar 20, 2017 at 5:59 PM, Charles Kozler
> wrote:
> > Hi -
> >
> > I am wondering why OSSEC would be reporting hidden processes on my ovirt
> > nodes? I run OSSEC across the infrastructure and multiple ovirt clusters
>
nce gain? What processes inside
ovirt would do such a thing?
Appreciate the help
On Wed, Mar 22, 2017 at 3:32 AM, Yedidyah Bar David wrote:
> On Tue, Mar 21, 2017 at 7:54 PM, Charles Kozler
> wrote:
> > Unfortunately by the time I am able to SSH to the server and start
> looking
&g
Well yes I am sure about the research I did :-)
However, to your point, I didnt actually consider that and of course now
clearly makes the most sense. Thanks!
On Wed, Mar 22, 2017 at 9:57 AM, Yedidyah Bar David wrote:
> On Wed, Mar 22, 2017 at 3:43 PM, Charles Kozler
> wrote:
> >
I'd like to share this with the list because its something that I changed
for convenience, in .bashrc, but had a not so obvious rippling impact on
the ovirt self hosted installer. I could imagine a few others doing this
too and I'd rather save future them hours of google time
Every install failed
>
> > What do you mean by that? Usually (I am not a native English speaker),
> > "red herring" means, for me, "something that made me look at the error
> > not in the place where it actually occurred". In this case:
>
> Yep! The installer would die out after failing at the SSO step. In the log
> fo
Did you setup fencing?
I've also seen this behavior with stressed CPU and NMI watch dog in BIOS
rebooting a server but that was on freebsd. Have not seen it on Linux
On Nov 25, 2017 2:07 PM, "Jonathan Baecker" wrote:
> Hello community,
>
> yesterday evening one of our nodes was rebooted, but I
Hi All -
Recently did this and thought it would be worth documenting. I couldnt find
any solid information on vsrx with kvm outside of flat KVM. This outlines
some of the things I hit along the way and how to fix. This is my one small
way of giving back to such an incredible open source tool
http
018 10:17, Yaniv Kaul wrote:
>
>
>
> On Wed, Mar 21, 2018 at 10:37 PM, Charles Kozler <
> ckozler...@gmail.com> wrote:
>
>> Hi All -
>>
>> Recently did this and thought it would be worth documenting. I couldnt
>> find any solid information on vsrx wit
oop :
>
>> On 22-3-2018 10:17, Yaniv Kaul wrote:
>>
>>
>>
>> On Wed, Mar 21, 2018 at 10:37 PM, Charles Kozler <
>> ckozler...@gmail.com> wrote:
>>
>>> Hi All -
>>>
>>> Recently did this and thought it would be worth documen
Hello -
I am kicking around different ideas of how I could achieve this
I have been bitten, hard, with in place upgrades before so I am not really
wanting to do this unless its a complete last resort...and even then I'm
iffy
Really, the only configuration I have is 1 VDSM hook and about 20 netwo
1 - 100 of 111 matches
Mail list logo
