RE: [vchkpw] qmail-scanner + clamav + spamassassin
> Hello, > That I wasn´t asking for, Ken! > Anybody know a HowTO for installing qmail-scanner + clamav > Regards, > Olli Etzel > Try www.qmailrocks.com or www.qmailtoaster.com Mark
Re: [vchkpw] qmail-scanner + clamav + spamassassin
Hello, That I wasn´t asking for, Ken! Anybody know a HowTO for installing qmail-scanner + clamav Regards, Olli Etzel > GoodnGo.de (R) Zentrale wrote: > > Hello Russel, hello all, > > > > a question beside. > > Where can I find a HowTO for installing qmail-scanner + clamav + > > spamassassin > > > > Regards in advantage, > > Oliver Etzel > > www.domainfex.com > > You might want to try simscan as a lightweight qmail-scanner > replacement. > > Documentation at > http://qmailwiki.org/Simscan > > Ken Jones > >
Re: [vchkpw] qmail-scanner + clamav + spamassassin
GoodnGo.de (R) Zentrale wrote: Hello Russel, hello all, a question beside. Where can I find a HowTO for installing qmail-scanner + clamav + spamassassin Regards in advantage, Oliver Etzel www.domainfex.com You might want to try simscan as a lightweight qmail-scanner replacement. Documentation at http://qmailwiki.org/Simscan Ken Jones
Re: [vchkpw] Qmail Scanner error UnknownSender error
Does this make sense to anyone? Spamassasin is supposed to use port 783. I don't think this looks correct. But every log shows zero errors! [EMAIL PROTECTED] qmail-smtpd]# nmap -sT -O localhost Starting nmap 3.70 ( http://www.insecure.org/nmap/ ) at 2005-06-08 14:34 PDTInsufficient responses for TCP sequencing (3), OS detection may be less accurateInteresting ports on localhost.localdomain (127.0.0.1):(The 1647 ports scanned but not shown below are in state: closed)PORT STATE SERVICE22/tcp open ssh25/tcp open smtp80/tcp open http106/tcp open pop3pw110/tcp open pop3111/tcp open rpcbind143/tcp open imap443/tcp open https631/tcp open ipp783/tcp open hp-alarm-mgr993/tcp open imaps3306/tcp open mysql1/tcp open snet-sensor-mgmtDevice type: general purposeRunning: Linux 2.4.X|2.5.X|2.6.XOS details: Linux 2.4.0 - 2.5.20, Gentoo 1.2 linux (Kernel 2.4.19-gentoo-rc5), Linux 2.4.20, Linux 2.4.20 - 2.4.22 w/grsecurity.org patch, Linux 2.5.25 - 2.6.3 or Gentoo 1.2 Linux 2.4.19 rc1-rc7)
Re: [vchkpw] Qmail Scanner error UnknownSender error
The scanner is stripping of the subject line and stripping off the sender field. Mail is making it to it's destination though. Much better than yesterday's problem. Does anyone know what could be effecting this? Brad Sumrall
Re: [vchkpw] Qmail Scanner error UnknownSender error
I am doing the QMail Rocks installation. I do not recall it ever installing formail. I am doing this install from the book. Any ideas? Brad Sumrall
Re: [vchkpw] Qmail Scanner error UnknownSender error
On Wednesday, June 8 at 04:03 PM, quoth [EMAIL PROTECTED]: I just redid my QMail Rocks installation again on Fedora Core 3. I did a lot more checking this time with SUIDPerl and made sure it was solid prior to install. Installation went error free. QMail is receiving email and sending them to our outlook clients. But. Sending mail will reach it's destination, but the scanner is stripping the header. Email arrive to their destination as UnknownSender and (no subject) there was info in both those fields when I sent them! Anyone have an idea what is causing this? Are you using the "formail" utility anywhere in your scripts before the mail gets sent? I once had a similar problem, where formail would add an mbox-style From header to the top of the email, which smtp servers would take as the first line of the body of an email without headers, and then things would get all mangled. ~Kyle -- Memory is like an orgasm---it's better when you don't have to fake it. -- Seymour Cray signature.asc Description: Digital signature
Re: [vchkpw] QMail Scanner 451 qq temorary problem.
This is a common problemwith qmailscanner. Id also point you to the LWQ way of instalation. Its by far the cleanest. 1.- This problem,to me, is associated with a faulty implantation of qmailscanner 2.- This is generally cause qmail cannot run qmailscanner 3.- You mentioned up2date if youre using fc3/4 or rhel4, note they have the SELinux patch enabled and running so: a) Make shure that upon attempting to deliver you DONT get Selinux messages in the /var/log/messages file (this would be the most common and confusing mistake) b) OBVIUSLY make shure that the uid that runs qmail* can run qmailscanner (check the perms) If the problem is not this one, then you should try and reinstall again, carefully... rinse, repeat [EMAIL PROTECTED] wrote: Hello everyone! I have an issue I have been working on for 2 days solid now. I am a Linux GURU (kindof) but not a newbie by any means. Using the QMAIL Rocks install Everything error free until Qmail scanner. I am getting the notorious 451 qq error Quick run down ran up2date on entire system(successfully) hit qmail scanner issue, though it might be suid related. Installed the latest stable of perl and ensured suid went on. [EMAIL PROTECTED] qmailrocks]# rpm -qa | grep perl perl-libwww-perl-5.79-5 perl-XML-SAX-0.12-7 mod_perl-1.99_16-3 perl-HTML-Tagset-3.03-30 perl-libxml-enno-1.02-31 perl-suidperl-5.8.5-12.FC3 perl-DBI-1.40-5 perl-HTML-Parser-3.35-6 perl-libxml-perl-0.07-30 perl-XML-NamespaceSupport-1.08-6 perl-XML-Twig-3.13-6 perl-XML-LibXML-1.58-1 perl-URI-1.30-4 perl-DBD-MySQL-2.9003-5 perl-Parse-Yapp-1.05-32 perl-XML-Dumper-0.71-2 perl-Convert-ASN1-0.18-3 perl-LDAP-0.31-5 perl-XML-LibXML-Common-0.13-7 newt-perl-1.08-7 perl-DateManip-5.42a-3 perl-XML-Encoding-1.01-26 perl-Time-HiRes-1.55-3 perl-Crypt-SSLeay-0.51-5 perl-5.8.5-12.FC3 perl-Filter-1.30-6 perl-XML-Parser-2.34-5 perl-XML-Grove-0.46alpha-27 See, it there! But, the config script ./qms-config says, Testing suid nature of /usr/local/bin/perl... Whoa - broken perl install found. Cannot even run a simple script setuid Now I know this is a lie! Tried it with and without suid support, nothing! This server was running perfect and had been rebooted a few times as well error free. Started this step by step and now email is down. I have: edit the /var/qmail/supervise/qmail-smtpd/run and even set the softlimit up to 50 megs and down to 2.5 as well double checked permission on the patch script file and all major files and directories. All research directs me to soft limit and suidperl. Both are confirmed installed correctly and permission and configs are good. Only questionable area is my /etc/tcp.smtp which has been swapped around a lot, but I am presently running test with every available possible option as this email is sent out. It would mean a lot to me if someone could at least point me in the right direction. I feel I am at a dead end now. Google and Yahoo show nothing new. Brad Sumrall [EMAIL PROTECTED] begin:vcard fn:Alejandro Borges n:Borges;Alejandro email;internet:[EMAIL PROTECTED] tel;work:11585166 x-mozilla-html:TRUE version:2.1 end:vcard
Re: [vchkpw] QMail Scanner 451 qq temorary problem.
[EMAIL PROTECTED] said the following on 6/6/2005 9:30 PM: Hello everyone! I have an issue I have been working on for 2 days solid now. I am a Linux GURU (kindof) but not a newbie by any means. Using the QMAIL Rocks install It would mean a lot to me if someone could at least point me in the right direction. I feel I am at a dead end now. Google and Yahoo show nothing new. Brad Sumrall [EMAIL PROTECTED] Suggestion would be to install using Life With qmail method http://www.lifewithqmail.org/lwq.html Also to read this *first*: http://pyropus.ca/personal/writings/12-steps-to-qmail-list-bliss.html This will help you formulate your question in a coherent fashion. Also search qmail archives, might help: http://gossamer-threads.com/lists/qmail/users/ Have you looked through archives of vchkpw list? http://www.mail-archive.com/vchkpw@inter7.com/ http://qmail-scanner.sourceforge.net/
Re: [vchkpw] Qmail-scanner and vpopmail
Jeremy Kitchen wrote: On Friday 09 April 2004 11:06 am, Mark Matrafajlo wrote: I have qmail-scanner installed but it doesn't seem to be called on when processing email. When I run qmail-scanner test script it picks it up but all other email is bpassed. Does anyone have any insight to this ? try asking the qmail-scanner list? also, "it doesn't work" is not a very good problem report. When you do post to the qmail-scanner list, make sure to give some details! -Jeremy www.free.bsd.com.br freebsd.slchapeco.org/howto/dicas/servemail.html []'s Márcio
Re: [vchkpw] Qmail-scanner and vpopmail
On Friday 09 April 2004 11:06 am, Mark Matrafajlo wrote: > I have qmail-scanner installed but it doesn't seem to be called on when > processing email. When I run qmail-scanner test script it picks it up but > all other email is bpassed. Does anyone have any insight to this ? try asking the qmail-scanner list? also, "it doesn't work" is not a very good problem report. When you do post to the qmail-scanner list, make sure to give some details! -Jeremy -- Jeremy Kitchen ++ Systems Administrator ++ Inter7 Internet Technologies, Inc. [EMAIL PROTECTED] ++ www.inter7.com ++ 866.528.3530 ++ 847.492.0470 int'l kitchen @ #qmail #gentoo on EFnet ++ scriptkitchen.com/qmail
Re: [vchkpw] Qmail-scanner and vpopmail
It´s very difficult to try to solve the problem if you don´t send more info, but, have a look to this links with very good HOWTO´s about qmail and Qmail Scanner. http://www.qmailrocks.org http://www.pipeline.com.au/staff/mbowe/isp/webmail-server.htm Regards, Jesus. - Original Message - From: "Mark Matrafajlo" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, April 09, 2004 6:06 PM Subject: [vchkpw] Qmail-scanner and vpopmail > I have qmail-scanner installed but it doesn't seem to be called on when > processing email. When I run qmail-scanner test script it picks it up but > all other email is bpassed. Does anyone have any insight to this ? > > >
Re: [vchkpw] qmail-scanner replacement
On Thu, 2004-02-05 at 11:44, Ted Deppner wrote: > > envelope information? see badmailfrom, and also there are several > > patches which allow you to filter on recipient information. > > badmailfrom doesn't allow for regex matches (I know there are patches, > but stock it doesn't allow it). true, but if you're about to employ the qmailqueue patch along with qmail-qfilter just to do regex based envelope filtering.. you should take a look at the qregex patch: http://www.arda.homeunix.net/store/qmail/ it allows for regex filtering on the envelope information, including badmailto. without the need for extensive third party programs, just a quick patch. -Jeremy -- Jeremy Kitchen Systems Administrator [EMAIL PROTECTED] Kitchen @ #qmail on EFNet - Join the party! . Inter7 Internet Technologies, Inc. www.inter7.com 866.528.3530 toll free 847.492.0470 int'l 847.492.0632 fax GNUPG key ID: 93BDD6CE
Re: [vchkpw] qmail-scanner replacement
On Thu, Feb 05, 2004 at 02:54:09AM -0600, Jeremy Kitchen wrote: > On Wed, 2004-02-04 at 23:48, Ted Deppner wrote: > > On Wed, Feb 04, 2004 at 10:29:58AM -0700, Tom Collins wrote: > > > message). I am curious about qmail-qfilter though... > > > > It doesn't appear to allow filtering on envelope information. Didn't > > dig too far, but didn't see any examples of it, and the examples shown > > didn't appear to have any hooks. > > envelope information? see badmailfrom, and also there are several > patches which allow you to filter on recipient information. badmailfrom doesn't allow for regex matches (I know there are patches, but stock it doesn't allow it). KLEZ was easily identified because of a null appended to the mail from: line... it's that sort of operation on envelope information handling that doesn't appear to be present in qmail-qfilter. -- Ted Deppner http://www.deppner.us/
Re: [vchkpw] qmail-scanner replacement
On Wed, 2004-02-04 at 23:48, Ted Deppner wrote: > On Wed, Feb 04, 2004 at 10:29:58AM -0700, Tom Collins wrote: > > message). I am curious about qmail-qfilter though... > > It doesn't appear to allow filtering on envelope information. Didn't > dig too far, but didn't see any examples of it, and the examples shown > didn't appear to have any hooks. envelope information? see badmailfrom, and also there are several patches which allow you to filter on recipient information. try sending a message to [EMAIL PROTECTED], or from [EMAIL PROTECTED] (just to name a few), you'll see :) -Jeremy -- Jeremy Kitchen Systems Administrator [EMAIL PROTECTED] Kitchen @ #qmail on EFNet - Join the party! . Inter7 Internet Technologies, Inc. www.inter7.com 866.528.3530 toll free 847.492.0470 int'l 847.492.0632 fax GNUPG key ID: 93BDD6CE
Re: [vchkpw] qmail-scanner replacement
On Wed, Feb 04, 2004 at 10:29:58AM -0700, Tom Collins wrote: > message). I am curious about qmail-qfilter though... It doesn't appear to allow filtering on envelope information. Didn't dig too far, but didn't see any examples of it, and the examples shown didn't appear to have any hooks. KLEZ was easily handled by simple envelope checks. -- Ted Deppner http://www.deppner.us/
RE: [vchkpw] qmail-scanner replacement
> I would like to know if there's some program to replace > qmail-scanner > (I don't even need the anti-spam feature, I wanna just scan > my messages > with ClamAV). I have lots of mail servers and some of them > are too large > to run things written in perl. I'm looking for something made > with real > programming language, like C or C++. > > > Eduardo M. Bragatto. As another alternative... Check out: http://projects.gasperino.org/scrubber/ Threaded, daemonized, modular, scanning. (Linux only we think.) We are looking this over right now... Very fast... But seems to be very beta... Tom Walsh Network Administrator http://www.ala.net/
Re: [vchkpw] qmail-scanner replacement
On Feb 4, 2004, at 9:08 AM, Rick Macdougall wrote: Hi, http://sourceforge.net/projects/clamdmail/ Haven't tried it myself but there you go. Regards, Rick I don't recommend it. It isn't stable, and has high memory requirements (it would sometimes lose large emails if I didn't crank up my softlimit). I recommend qscanq (URL posted by Peter Palmreuther in another message). I am curious about qmail-qfilter though... -- Tom Collins - [EMAIL PROTECTED] QmailAdmin: http://qmailadmin.sf.net/ Vpopmail: http://vpopmail.sf.net/ Info on the Sniffter handheld Network Tester: http://sniffter.com/
RE: [vchkpw] qmail-scanner replacement
> Hi, > > I would like to know if there's some program to replace > qmail-scanner > (I don't even need the anti-spam feature, I wanna just scan > my messages > with ClamAV). I have lots of mail servers and some of them > are too large > to run things written in perl. I'm looking for something made > with real > programming language, like C or C++. > > > Eduardo M. Bragatto. There is a qmail queue replacement (much like qmail-scanner) written in C. It is called qmail-qfilter. http://untroubled.org/qmail-qfilter/ Works with either QMAILQUEUE patch or, with a minor code modification to the source code, as qmail-queue replacement. Tom Walsh Network Administrator http://www.ala.net/
Re: [vchkpw] qmail-scanner replacement
Eduardo M. Bragatto wrote: Hi, I would like to know if there's some program to replace qmail-scanner (I don't even need the anti-spam feature, I wanna just scan my messages with ClamAV). I have lots of mail servers and some of them are too large to run things written in perl. I'm looking for something made with real programming language, like C or C++. Hi, http://sourceforge.net/projects/clamdmail/ Haven't tried it myself but there you go. Regards, Rick
Re: [vchkpw] qmail-scanner
On Fri, 2003-11-28 at 12:35, Michael Bowe wrote: > My guide contains some information on this subject : > http://www.pipeline.com.au/staff/mbowe/isp/webmail-server.htm#SPAM_VIRUS > > Michael. Thanks Michael. So applying this #!/bin/sh # when QMAILQUEUE is set, all mail will be sent to the nominated script QMAILQUEUE="/var/qmail/bin/qmail-scanner-queue.pl" export QMAILQUEUE is the piece that scans everything, like vpopmail domains with user to user email also ? Thanks Dee > - Original Message - > From: Gary > To: [EMAIL PROTECTED] > Sent: Saturday, November 29, 2003 8:01 AM > Subject: [vchkpw] qmail-scanner > > Hi all i've looked in the qmail-scanner list for the answer > and i'm not sure i found it yet. > > i want to have qmail-scanner scan email to all vpopmail > accounts. > > i've heard there are issues but there is very little > documentation on this. > > is there anything anyone has that I can read, or any guidance. > > Cheers, > > Gary > -- W.D.McKinney (Dee) | Affordable E-Mail and Internet Solutions Alaska Wireless Systems | for Schools, Libraries, Clinics & Businesses http://www.akwireless.net | Call 1-907-349-4308
Re: [vchkpw] qmail-scanner
My guide contains some information on this subject : http://www.pipeline.com.au/staff/mbowe/isp/webmail-server.htm#SPAM_VIRUS Michael. - Original Message - From: Gary To: [EMAIL PROTECTED] Sent: Saturday, November 29, 2003 8:01 AM Subject: [vchkpw] qmail-scanner Hi all i've looked in the qmail-scanner list for the answer and i'm not sure i found it yet. i want to have qmail-scanner scan email to all vpopmail accounts. i've heard there are issues but there is very little documentation on this. is there anything anyone has that I can read, or any guidance. Cheers, Gary
