On Mon, 24 Nov 2008 21:41:54 +0100, Nicolas Huillard wrote
Alex Betis a écrit :
On Mon, Nov 24, 2008 at 3:24 PM, Nicolas Huillard Guys,
How about putting the system in suspend mode instead of powering it off and
on again? Should take few seconds.
Suspend to RAM as always been a pain in
Frank Schmirler a écrit :
On Mon, 24 Nov 2008 21:41:54 +0100, Nicolas Huillard wrote
This also works around an annoying bug in the (non-upgraded) EPIA
BIOS: the PXE LAN boot does not always initialize the network
interface after a shutdown. One have to unplug power to boot
correctly next
On Tue, 25 Nov 2008 14:39:19 +0100, Nicolas Huillard wrote
Frank Schmirler a écrit :
Current via-rhine drivers have a module option to fix this:
via-rhine.avoid_D3=1
For older kernes there's a patch: http://lkml.org/lkml/2004/9/17/242
I was sure it wouldn't hurt to ask on this ML...
Frank Schmirler a écrit :
On Tue, 25 Nov 2008 14:39:19 +0100, Nicolas Huillard wrote
I'd try to insert it on the PXE kernel command-line, but it's
explicitely ignored by the kernel :
ml6000 kernel: Unknown boot option `via_rhine.avoid_D3=1': ignoring
...or implicitely, when I just add
On Tuesday 25 November 2008, Frank Schmirler wrote:
7 seconds until I get a picture on my EPIA 6000. And this is still pretty
long, as I need to upload DXR3 firmware first, then start VDR.
Hmm, any particular reason why you need to do that? Recent em8300 driver
versions should be able to
On 24 Nov 2008, at 19:37, Nicolas Huillard wrote:
Blah, only one PCI slot. Where are proper low-power MB's with 2 or
more PCI
slots for DVB-cards? And how much does the server (NFS, DVB-
card(s)) use
power?
No use of PCI in the client.
Do you put the DVB cards in the server?
--
Blah, only one PCI slot. Where are proper low-power MB's with 2 or
more PCI slots for DVB-cards?
Asrock A780FullDisplay without DisplayPort card
AMD Athlon X4 3850e
2GB DDR2-800
DVD/RW
300W 80+ Green
1x Momentus 7200.3 250GB 2,5
3x WD Caviar Green 1TB 3,5
Terratec Diversity (Dual Tuner)
Torgeir Veimo a écrit :
On 24 Nov 2008, at 19:37, Nicolas Huillard wrote:
Blah, only one PCI slot. Where are proper low-power MB's with 2 or
more PCI
slots for DVB-cards? And how much does the server (NFS, DVB-
card(s)) use
power?
No use of PCI in the client.
Do you put the DVB
On Mon, 24 Nov 2008 11:58:22 +0100
Holger Rusch [EMAIL PROTECTED] wrote:
The A780 chipset is nice for low-power needs.
That's not what I found. I tried to install an Asus MA738EMH last week
and had to give up in the end and replace it with a similar board with
NVidia 8200 graphics (that choice
Mika Laitio a écrit :
What I have now tried to search for is a fast booting client for my old
P700, that could boot automatically to X with dummy user and then launch
the vdr-xineliboutput.
The ideal would be that once bios checks have been done, rest of the boot
would for getting X and
Alex Betis a écrit :
On Mon, Nov 24, 2008 at 3:24 PM, Nicolas Huillard [EMAIL PROTECTED]wrote:
From kernel first log line in the syslog server (I guess timestamps are
when rcS.d/ scripts start to run, ie. does not include kernel load time
+ initrd), to LIRC accepting the VDR client
Torgeir Veimo a écrit :
On 22 Nov 2008, at 21:04, Nicolas Huillard wrote:
I must tell that the xxmc (XVMC-VLD) decoding is nearly perfect, the
OSD is fully transparent on this, and does not take any CPU at all,
and the system is on par with softdevice.
What cpu usage did you get when
Hi all,
I'd like to report that I'm really impressed by the new setup I now
have. The most problematic thing was proper transparent OSD which would
not eat much CPU. I must tell that the xxmc (XVMC-VLD) decoding is
nearly perfect, the OSD is fully transparent on this, and does not take
any
13 matches
Mail list logo