[vdr] DVB_API_VERSION problem

[Leo Márquez]

Dear all,

I'm trying to build vdr-1.7.35.
I know that it requires at least a DVB driver with api version 5.3 or
higher. For this reason I downloaded and compiled the V4L-DVB dvb drivers
from linuxtv.org.
The process seems to be completed ok, I restarted to be sure the new driver
is used and I also created a Make.config file in the vdr folder in order to
specify the DVBDIR but VDR is still complaining about the DVB_API_VERSION.

At this time I'm a little bit confused and I'm not sure if I'm using the
new driver or not. Is there a way to check if I'm using a dvb api version
5.3 or higher?
If I check the DVB api version and it is ok, what can I do next?

I'm using debian squeeze with kernel 2.6.32.

Thank you very much.

Leo
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

[vdr] test - please ignore

[Leo Márquez]

this is a test
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

[vdr] help needed using two dishes

[Leo Márquez]

Hello all,

I'm a bit lost when I wonder how can I use my two dishes (one motorized) in
my vdr server at same time.
Right now I'm using an static dish to astra but I want to add the motorized
one (currently connected to a decoder) to the installation.
I have a 1.6 vdr server with 4 tuners (2 dvb-s, 2 dvb-t) serving to three
media mvp clients.

Sorry if the following question is an offtopic, but I need to resolve it. I
understand that the physical installation only requires a diseqc between the
dishes and the vdr tuners. Is this correct?

For the software, which plugins or patches have I to use? I have seen the
rotor plugin and the gotox patch, but I don't know if they are up to date
and usable with 1.6.

Anyone can me point me on that?

Thank you very much.

Leo
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

[vdr] no EPG

[Leo Márquez]

Hello,

I have used VDR for a long time with no EPG problems but some day I stopped
seeing epg data.
Then I decided upgrade my old vdr 1.4.7 to 1.6-2 but EPG has not returned. I
checked the epg.data file and it is empty.
I also looked the syslog but I don't see any information related to the epg.
I can see the tv channels perfectly.

I have 2 dvb-t devices and 2 dvb-s devices but currently no dvb-s channels
in channels.conf. Could be the cause of the problem?

Thank you.

Leo
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

[vdr] black screen with softdevice 0.5.0 and vdr 1.6

[Leo Márquez]

Hi,

I am trying to set up a vdr with softdevice 0.5.0 (dfb) and vdr 1.6.
Vdr and softdevice compile fine but when I start vdr I get osd and audio and
no video.
The channels I want to see are dvb-t, no hd.
I did not see any error in logs. I remember have this problem few time ago
but any mailing list or google search helped me to remember what is the
problem and the solution.

Thank you!.

I put here the vdr output to help you know what is happening:

vdr:/usr/src/vdr16# ./vdr -c /etc/vdr -v /videoteca/v0 -Psoftdevice -vo
dfb:
softdevice: Created setupStoreId 327681!
softdevice: Attatched to setupStoreId 327681 at 0xb78dd000.
[softdevice] processing args
[softdevice]   argv [0] = softdevice
[softdevice]   argv [1] = -vo
[setup-softdevice] alsa ac3Mode set to: 0
[setup-softdevice] alsa AC3 device set to: hw:0,1
[setup-softdevice] alsa device set to: default
[setup-softdevice] autodetectAspect 0
[setup-softdevice] A/V Offset set to (0)
[setup-softdevice] Cropping 0 lines from bottom
[setup-softdevice] Cropping 0 columns from left
[setup-softdevice] cropping mode set to 0 (none)
[setup-softdevice] cropping mode toggle key set to 0 (none)
[setup-softdevice] Cropping 0 columns from right
[setup-softdevice] Cropping 0 lines from top
[setup-softdevice] deinterlace method set to 1 lavc
[setup-softdevice] Expanding 0 columns at left and right
[setup-softdevice] Expanding 0 columns at top and bottom
[setup-softdevice] mainMenu: 1
[setup-softdevice] setting alpha blend mode to software
[softdevice] picture mirroring set to 0 (off)
[setup-softdevice] pixel format set to (I420)
[setup-softdevice] shouldSuspend to: 0
[setup-softdevice] syncTimerMode: sig
[softdevice] UseSetSourceRectangle to off
[softdevice] UseStretchBlitset to off
[setup-softdevice] vidBrightness: -1
[setup-softdevice] vidContrast: -1
[setup-softdevice] vidHue: -1
[setup-softdevice] vidSaturation: -1
[setup-softdevice] startup aspect set to (4:3 normal)
[softdevice] initializing Plugin
[softdevice] Initializing Video Out
[softdevice] ffmpeg build(3345152)
23:33:22.0883 I [5033] [dfb] init
(*) DirectFB/Config: Parsing config file '/etc/directfbrc'.
   -- DirectFB v0.9.25 -
 (c) 2000-2002  convergence integrated media GmbH
 (c) 2002-2004  convergence GmbH
---
(*) DirectFB/Core: Single Application Core. (2006-12-04 07:00)
(*) Direct/Memcpy: Using MMXEXT optimized memcpy()
(*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 5069)...
(*) Direct/Thread: Running 'PS/2 Input' (INPUT, 5070)...
 (!!!)  *** UNIMPLEMENTED [fusion_reactor_set_lock] ***
[../../../lib/fusion/reactor.c:853]
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (Convergence GmbH)
(*) Direct/Thread: Running 'Keyboard Input' (INPUT, 5071)...
(*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5072)...
(*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1 (convergence
integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5073)...
(*) DirectFB/Input: cx88 IR (Hauppauge Nova-T DVB-T (2) 0.1 (convergence
integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5074)...
(*) DirectFB/Input: ImExPS/2 Generic Explorer Mouse (3) 0.1 (convergence
integrated media GmbH)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: nVidia NV02 (0x002d) 0.6 (directfb.org)
(*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
[dfb] RAM: 32505600 bytes
[dfb] Accellerated Functions: FillRectange DrawRectange DrawLine
FillTriangle Blit StretchBlit All
[dfb] Drawing Flags: Blend
[dfb] Surface Blitting Flags: BlendAlpha BlendColorAlpha Colorize
Deinterlace
23:33:23.0176 I [5033] [dfb] Supported video Modes are:
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL 
PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]@8 
[EMAIL PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL 
PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL 
PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
 [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]@8 [EMAIL PROTECTED] 
[EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
23:33:23.0178 I [5033] [dfb] Enumerating display Layers
23:33:23.0179 I [5033] [dfb] Configuring CooperativeLevel for OSD
Layer 0 FBDev Primary Layer  Type: graphics
  Caps: brightness contrast saturation surface
Layer 1 NVidia Overlay  Type: picture video
  Caps: brightness contrast deinterlacing dst_colorkey hue saturation
screen_location surface
23:33:23.0180 I [5033] [dfb] (osdLayer): flags, options, pixelformat:
000f,  00400c03
23:33:23.0181 I [5033] [dfb] (osdLayer): width, height:   768
576
23:33:23.0181 I [5033] [dfb] 

[vdr] black screen with softdevice 0.5.0 and vdr 1.6

[Leo Márquez]

Hi,

I am trying to set up a vdr with softdevice 0.5.0 (dfb) and vdr 1.6.
Vdr and softdevice compile fine but when I start vdr I get osd and audio and
no video.
The channels I want to see are dvb-t, no hd.
I did not see any error in logs. I remember have this problem few time ago
but any mailing list or google search helped me to remember what is the
problem and the solution.

Thank you!.

I put here the vdr output to help you know what is happening:

vdr:/usr/src/vdr16# ./vdr -c /etc/vdr -v /videoteca/v0 -Psoftdevice -vo
dfb:
softdevice: Created setupStoreId 327681!
softdevice: Attatched to setupStoreId 327681 at 0xb78dd000.
[softdevice] processing args
[softdevice]   argv [0] = softdevice
[softdevice]   argv [1] = -vo
[setup-softdevice] alsa ac3Mode set to: 0
[setup-softdevice] alsa AC3 device set to: hw:0,1
[setup-softdevice] alsa device set to: default
[setup-softdevice] autodetectAspect 0
[setup-softdevice] A/V Offset set to (0)
[setup-softdevice] Cropping 0 lines from bottom
[setup-softdevice] Cropping 0 columns from left
[setup-softdevice] cropping mode set to 0 (none)
[setup-softdevice] cropping mode toggle key set to 0 (none)
[setup-softdevice] Cropping 0 columns from right
[setup-softdevice] Cropping 0 lines from top
[setup-softdevice] deinterlace method set to 1 lavc
[setup-softdevice] Expanding 0 columns at left and right
[setup-softdevice] Expanding 0 columns at top and bottom
[setup-softdevice] mainMenu: 1
[setup-softdevice] setting alpha blend mode to software
[softdevice] picture mirroring set to 0 (off)
[setup-softdevice] pixel format set to (I420)
[setup-softdevice] shouldSuspend to: 0
[setup-softdevice] syncTimerMode: sig
[softdevice] UseSetSourceRectangle to off
[softdevice] UseStretchBlitset to off
[setup-softdevice] vidBrightness: -1
[setup-softdevice] vidContrast: -1
[setup-softdevice] vidHue: -1
[setup-softdevice] vidSaturation: -1
[setup-softdevice] startup aspect set to (4:3 normal)
[softdevice] initializing Plugin
[softdevice] Initializing Video Out
[softdevice] ffmpeg build(3345152)
23:33:22.0883 I [5033] [dfb] init
(*) DirectFB/Config: Parsing config file '/etc/directfbrc'.
   -- DirectFB v0.9.25 -
 (c) 2000-2002  convergence integrated media GmbH
 (c) 2002-2004  convergence GmbH
---
(*) DirectFB/Core: Single Application Core. (2006-12-04 07:00)
(*) Direct/Memcpy: Using MMXEXT optimized memcpy()
(*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 5069)...
(*) Direct/Thread: Running 'PS/2 Input' (INPUT, 5070)...
 (!!!)  *** UNIMPLEMENTED [fusion_reactor_set_lock] ***
[../../../lib/fusion/reactor.c:853]
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (Convergence GmbH)
(*) Direct/Thread: Running 'Keyboard Input' (INPUT, 5071)...
(*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5072)...
(*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1 (convergence
integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5073)...
(*) DirectFB/Input: cx88 IR (Hauppauge Nova-T DVB-T (2) 0.1 (convergence
integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5074)...
(*) DirectFB/Input: ImExPS/2 Generic Explorer Mouse (3) 0.1 (convergence
integrated media GmbH)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: nVidia NV02 (0x002d) 0.6 (directfb.org)
(*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
[dfb] RAM: 32505600 bytes
[dfb] Accellerated Functions: FillRectange DrawRectange DrawLine
FillTriangle Blit StretchBlit All
[dfb] Drawing Flags: Blend
[dfb] Surface Blitting Flags: BlendAlpha BlendColorAlpha Colorize
Deinterlace
23:33:23.0176 I [5033] [dfb] Supported video Modes are:
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL 
PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]@8 
[EMAIL PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL 
PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL 
PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
 [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]@8 [EMAIL PROTECTED] 
[EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
23:33:23.0178 I [5033] [dfb] Enumerating display Layers
23:33:23.0179 I [5033] [dfb] Configuring CooperativeLevel for OSD
Layer 0 FBDev Primary Layer  Type: graphics
  Caps: brightness contrast saturation surface
Layer 1 NVidia Overlay  Type: picture video
  Caps: brightness contrast deinterlacing dst_colorkey hue saturation
screen_location surface
23:33:23.0180 I [5033] [dfb] (osdLayer): flags, options, pixelformat:
000f,  00400c03
23:33:23.0181 I [5033] [dfb] (osdLayer): width, height:   768
576
23:33:23.0181 I [5033] [dfb] 

[vdr] black screen with softdevice 0.5.0 and vdr 1.6

[Leo Márquez]

Hi,

I am trying to set up a vdr with softdevice 0.5.0 (dfb) and vdr 1.6.
Vdr and softdevice compile fine but when I start vdr I get osd and audio and
no video.
The channels I want to see are dvb-t, no hd.
I did not see any error in logs. I remember have this problem few time ago
but any mailing list or google search helped me to remember what is the
problem and the solution.

Thank you!.

I put here the vdr output to help you know what is happening:

vdr:/usr/src/vdr16# ./vdr -c /etc/vdr -v /videoteca/v0 -Psoftdevice -vo
dfb:
softdevice: Created setupStoreId 327681!
softdevice: Attatched to setupStoreId 327681 at 0xb78dd000.
[softdevice] processing args
[softdevice]   argv [0] = softdevice
[softdevice]   argv [1] = -vo
[setup-softdevice] alsa ac3Mode set to: 0
[setup-softdevice] alsa AC3 device set to: hw:0,1
[setup-softdevice] alsa device set to: default
[setup-softdevice] autodetectAspect 0
[setup-softdevice] A/V Offset set to (0)
[setup-softdevice] Cropping 0 lines from bottom
[setup-softdevice] Cropping 0 columns from left
[setup-softdevice] cropping mode set to 0 (none)
[setup-softdevice] cropping mode toggle key set to 0 (none)
[setup-softdevice] Cropping 0 columns from right
[setup-softdevice] Cropping 0 lines from top
[setup-softdevice] deinterlace method set to 1 lavc
[setup-softdevice] Expanding 0 columns at left and right
[setup-softdevice] Expanding 0 columns at top and bottom
[setup-softdevice] mainMenu: 1
[setup-softdevice] setting alpha blend mode to software
[softdevice] picture mirroring set to 0 (off)
[setup-softdevice] pixel format set to (I420)
[setup-softdevice] shouldSuspend to: 0
[setup-softdevice] syncTimerMode: sig
[softdevice] UseSetSourceRectangle to off
[softdevice] UseStretchBlitset to off
[setup-softdevice] vidBrightness: -1
[setup-softdevice] vidContrast: -1
[setup-softdevice] vidHue: -1
[setup-softdevice] vidSaturation: -1
[setup-softdevice] startup aspect set to (4:3 normal)
[softdevice] initializing Plugin
[softdevice] Initializing Video Out
[softdevice] ffmpeg build(3345152)
23:33:22.0883 I [5033] [dfb] init
(*) DirectFB/Config: Parsing config file '/etc/directfbrc'.
   -- DirectFB v0.9.25 -
 (c) 2000-2002  convergence integrated media GmbH
 (c) 2002-2004  convergence GmbH
---
(*) DirectFB/Core: Single Application Core. (2006-12-04 07:00)
(*) Direct/Memcpy: Using MMXEXT optimized memcpy()
(*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 5069)...
(*) Direct/Thread: Running 'PS/2 Input' (INPUT, 5070)...
 (!!!)  *** UNIMPLEMENTED [fusion_reactor_set_lock] ***
[../../../lib/fusion/reactor.c:853]
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (Convergence GmbH)
(*) Direct/Thread: Running 'Keyboard Input' (INPUT, 5071)...
(*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5072)...
(*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1 (convergence
integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5073)...
(*) DirectFB/Input: cx88 IR (Hauppauge Nova-T DVB-T (2) 0.1 (convergence
integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 5074)...
(*) DirectFB/Input: ImExPS/2 Generic Explorer Mouse (3) 0.1 (convergence
integrated media GmbH)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: nVidia NV02 (0x002d) 0.6 (directfb.org)
(*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
[dfb] RAM: 32505600 bytes
[dfb] Accellerated Functions: FillRectange DrawRectange DrawLine
FillTriangle Blit StretchBlit All
[dfb] Drawing Flags: Blend
[dfb] Surface Blitting Flags: BlendAlpha BlendColorAlpha Colorize
Deinterlace
23:33:23.0176 I [5033] [dfb] Supported video Modes are:
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL 
PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL 
PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL 
PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL 
PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL 
PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED]
23:33:23.0178 I [5033] [dfb] Enumerating display Layers
23:33:23.0179 I [5033] [dfb] Configuring CooperativeLevel for OSD
Layer 0 FBDev Primary Layer  Type: graphics
  Caps: brightness contrast saturation surface
Layer 1 NVidia Overlay  Type: picture video
  Caps: brightness contrast deinterlacing dst_colorkey hue saturation
screen_location surface
23:33:23.0180 I [5033] [dfb] (osdLayer): flags, options, pixelformat:
000f,  00400c03
23:33:23.0181 I [5033] [dfb] (osdLayer): width, height:   768
576

[vdr] e-tobi ubuntu hardy

[Leo Márquez]

Hi,

I'm trying to set vdr building the packages from the e-tobi source packages.
I'm doing this because I want to run vdr as streamdev client, with no dvb
card in the client system.
The e-tobi source I'm using is:

deb-src http://e-tobi.net/vdr-experimental etch base addons vdr-multipatch

The problem I have is that if I do:

sudo apt-get build-dep vdr-plugin-xineliboutput

The system says me that any version of the libxine-dev package can satisfy
the xineliboutput dependencies.
If I ignore the message and try to build the .deb packages (satisfying
manually the dependences) there is a moment that apt ask me to update the
vdr package.
At this point I am a bit confused because I understand that this is a
conflict between my e-tobi installed vdr and the ubuntu hardy vdr package.

My goal on this is get a streamdev client vdr box with xineliboutput output.

Could anyone advise me to acquire my objective?

Thank you.

Leo
___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Re: [vdr] Spanish DVB-T Channels in Hispasat.

[Leo Márquez]

Hello,

I think if you can found spanish terrestial channels in hispasat they may be
dvb-s and of course you can tune it with a dvb-s card.
I think this a way to watch terrestial channels at places on the dvb-t
signal is poor.
But if channels are also in hispasat, they sure are in dvb-s.

If you have more questions you can reach me by email in catalan or spanish.

Bye.

Leo



2008/3/5, Albert Gall [EMAIL PROTECTED]:

 It is possible the reception of these channels with
 vdr + dvb-s card?

 Greetings

 ___
 vdr mailing list
 vdr@linuxtv.org
 http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Re: [vdr] Spanish Not DVB-S compliant Channels in Hispasat.

[Leo Márquez]

Ok I see. I was thinking about dvb-s compliant channels.
And what's the point of broadcast a non-dvb-s channels through sat?

Leo


2008/3/5, Albert Gall [EMAIL PROTECTED]:

 Excuse Jean-Claude Repetto.

 I refer to the channels Not DVB-S compliant emitted by Hispasat.
 On this website can be http://es.kingofsat.net/pos-30W.php.

 For example:


 TVE 1  Not DVB-S compliant
 TVE 2 Not DVB-S compliant

 It is possible the reception of these channels with vdr + dvb-s card?

 Greetings

 ___
 vdr mailing list
 vdr@linuxtv.org
 http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

[vdr] streaming to iphone/touch

[Leo Márquez]

Hi,

I just have received a gift, a ipod touch. I have wifi and it is 
possible install applications on it.
Google maps, youtube, and other multimedia applications can be installed.

Now I have seen that myhttv can stream live tv to the iphone/ipod touch. 
See this:

http://smart-home-blog.com/archives/838

I know that it vdr can be built in mac computers.
Do you think that could be possible build vdr-streamdev to watch tv and 
recording in my ipod?
I do not have technical knowledgements to see if it is possible but as I 
have readed in the article from the link above:

'Both gadgets handle a specific version of the MPEG-4 standard, as well 
as H264 video streams'

What do you think about?

Thanks

Leo

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Re: [vdr] vdr-burn dvdauthor crash

[Leo Márquez]

Hi, thanks for your answer.
You are right!! I have noticed that this file

/videoteca/v0/vdr-burn.Docs.VALw4h/VDRSYNC.1/menu-bg-0.mpg

is 0 sized!
I have taked a look to the vdrburn-dvd.sh file but I don't found where 
this files is copied from /etc/vdr/plugins/burn that is on I have this 
file that comes with burn source.

Thanks.

Leo

Christoph Haubrich escribió:

Leo Márquez schrieb:
  

Hi,

After a lot of tests I have reached that I can't burn any vdr recordings 
with vdr-burn plugin if I choose do a 'dvd with menus'. In dvd.log I see:

dvdauthor -x dvd.xml 

segmentation fault

If I run this command in shell I get same result, segmentation fault again.

I'm using vdr 1.4.3 and also tested with vdr-1.4.6
burn plugin is
http://linux.kompiliert.net/contrib/vdr-burn-0.1.0-pre21.tgz
and dvdauthor is the recommended in readme:

dvdauthor- http://dvdauthor.sourceforge.net
  ** Tested with 0.6.10
  ** recommended: 0.6.12-alpha-2992-GfD-5 from
  ** 
http://www.videohelp.com/~gfd/edcounter.php?file=download/dvdauthor-0.6.12-alpha-2992-GfD-5.zip
  ** if you want to create discs with titles longer than 1 seconds

I also have tested compiling dvdauthor 0.6.14.

Anyone has experimented the same problem? And know how to solve this?


Thanks.
  


dvdauthor is known to crash without a message if a input file is 
missing, so have a look into your dvd.xml and check if each mpg, png, 
etc. exist (with a size larger than zero).  Maybe in earlier steps 
something went wrong which can be verified via the log file.

Cheers

Christoph

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

__ Información de NOD32, revisión 2400 (20070716) __

Este mensaje ha sido analizado con  NOD32 antivirus system
http://www.nod32.com



  



___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Re: [vdr] vdr-burn dvdauthor crash

[Leo Márquez]

Hi again.
The attachment is my dvd.log file.
I think that the process that generates the menu-bg-0.mpg file fails but 
I don't know which process it's.
My temporaly folder of the burning looks like:

vdr:/videoteca/v0# ls -lh vdr-burn.Docs.dExVU5/
total 192K
drwxr-xr-x 4 root root 4,0K 2007-07-19 18:57 DVDAUTHOR
-rw-r--r-- 1 root root  35K 2007-07-19 18:57 dvd.log
-rw-r--r-- 1 root root 2,4K 2007-07-19 18:57 dvd.xml
-rw-r--r-- 1 root root  377 2007-07-19 18:57 menu-0.xml
-rw-r--r-- 1 root root  23K 2007-07-19 18:57 menu-background.m2v
-rw-r--r-- 1 root root0 2007-07-19 18:57 menu-bg-0.mpg
-rw-r--r-- 1 root root  94K 2007-07-19 18:57 menu-bg-0.png
-rw-r--r-- 1 root root 3,4K 2007-07-19 18:57 menu-buttons-h-0.png
-rw-r--r-- 1 root root 2,9K 2007-07-19 18:57 menu-buttons-ns.png
drwxr-xr-x 2 root root 4,0K 2007-07-19 18:57 VDRSYNC.0
drwxr-xr-x 2 root root 4,0K 2007-07-19 18:57 VDRSYNC.1
drwxr-xr-x 2 root root 4,0K 2007-07-19 18:57 VDRSYNC.2

The key is the zero sized menu-bg-0.mpg

I hope with this information you can help me.

Thanks.

Leo Márquez escribió:

Hi, thanks for your answer.
You are right!! I have noticed that this file

/videoteca/v0/vdr-burn.Docs.VALw4h/VDRSYNC.1/menu-bg-0.mpg

is 0 sized!
I have taked a look to the vdrburn-dvd.sh file but I don't found where 
this files is copied from /etc/vdr/plugins/burn that is on I have this 
file that comes with burn source.

Thanks.

Leo

Christoph Haubrich escribió:

  

Leo Márquez schrieb:
 



Hi,

After a lot of tests I have reached that I can't burn any vdr recordings 
with vdr-burn plugin if I choose do a 'dvd with menus'. In dvd.log I see:

dvdauthor -x dvd.xml 

segmentation fault

If I run this command in shell I get same result, segmentation fault again.

I'm using vdr 1.4.3 and also tested with vdr-1.4.6
burn plugin is
http://linux.kompiliert.net/contrib/vdr-burn-0.1.0-pre21.tgz
and dvdauthor is the recommended in readme:

dvdauthor- http://dvdauthor.sourceforge.net
 ** Tested with 0.6.10
 ** recommended: 0.6.12-alpha-2992-GfD-5 from
 ** 
http://www.videohelp.com/~gfd/edcounter.php?file=download/dvdauthor-0.6.12-alpha-2992-GfD-5.zip
 ** if you want to create discs with titles longer than 1 seconds

I also have tested compiling dvdauthor 0.6.14.

Anyone has experimented the same problem? And know how to solve this?


Thanks.
 
   

  

dvdauthor is known to crash without a message if a input file is 
missing, so have a look into your dvd.xml and check if each mpg, png, 
etc. exist (with a size larger than zero).  Maybe in earlier steps 
something went wrong which can be verified via the log file.

Cheers

Christoph

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

__ Información de NOD32, revisión 2400 (20070716) __

Este mensaje ha sido analizado con  NOD32 antivirus system
http://www.nod32.com



 





___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

__ Información de NOD32, revisión 2402 (20070717) __

Este mensaje ha sido analizado con  NOD32 antivirus system
http://www.nod32.com



  



___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Re: [vdr] vdr-burn dvdauthor crash

[Leo Márquez]

Sorry I have forgotted the attachment

Leo

Leo Márquez escribió:


Hi again.
The attachment is my dvd.log file.
I think that the process that generates the menu-bg-0.mpg file fails but 
I don't know which process it's.

My temporaly folder of the burning looks like:

vdr:/videoteca/v0# ls -lh vdr-burn.Docs.dExVU5/
total 192K
drwxr-xr-x 4 root root 4,0K 2007-07-19 18:57 DVDAUTHOR
-rw-r--r-- 1 root root  35K 2007-07-19 18:57 dvd.log
-rw-r--r-- 1 root root 2,4K 2007-07-19 18:57 dvd.xml
-rw-r--r-- 1 root root  377 2007-07-19 18:57 menu-0.xml
-rw-r--r-- 1 root root  23K 2007-07-19 18:57 menu-background.m2v
-rw-r--r-- 1 root root0 2007-07-19 18:57 menu-bg-0.mpg
-rw-r--r-- 1 root root  94K 2007-07-19 18:57 menu-bg-0.png
-rw-r--r-- 1 root root 3,4K 2007-07-19 18:57 menu-buttons-h-0.png
-rw-r--r-- 1 root root 2,9K 2007-07-19 18:57 menu-buttons-ns.png
drwxr-xr-x 2 root root 4,0K 2007-07-19 18:57 VDRSYNC.0
drwxr-xr-x 2 root root 4,0K 2007-07-19 18:57 VDRSYNC.1
drwxr-xr-x 2 root root 4,0K 2007-07-19 18:57 VDRSYNC.2

The key is the zero sized menu-bg-0.mpg

I hope with this information you can help me.

Thanks.

Leo Márquez escribió:

 


Hi, thanks for your answer.
You are right!! I have noticed that this file

/videoteca/v0/vdr-burn.Docs.VALw4h/VDRSYNC.1/menu-bg-0.mpg

is 0 sized!
I have taked a look to the vdrburn-dvd.sh file but I don't found where 
this files is copied from /etc/vdr/plugins/burn that is on I have this 
file that comes with burn source.


Thanks.

Leo

Christoph Haubrich escribió:



   


Leo Márquez schrieb:


  

 


Hi,

After a lot of tests I have reached that I can't burn any vdr recordings 
with vdr-burn plugin if I choose do a 'dvd with menus'. In dvd.log I see:


dvdauthor -x dvd.xml 

segmentation fault

If I run this command in shell I get same result, segmentation fault again.

I'm using vdr 1.4.3 and also tested with vdr-1.4.6
burn plugin is
http://linux.kompiliert.net/contrib/vdr-burn-0.1.0-pre21.tgz
and dvdauthor is the recommended in readme:

dvdauthor- http://dvdauthor.sourceforge.net
** Tested with 0.6.10
** recommended: 0.6.12-alpha-2992-GfD-5 from
** 
http://www.videohelp.com/~gfd/edcounter.php?file=download/dvdauthor-0.6.12-alpha-2992-GfD-5.zip

** if you want to create discs with titles longer than 1 seconds

I also have tested compiling dvdauthor 0.6.14.

Anyone has experimented the same problem? And know how to solve this?


Thanks.

 



   

dvdauthor is known to crash without a message if a input file is 
missing, so have a look into your dvd.xml and check if each mpg, png, 
etc. exist (with a size larger than zero).  Maybe in earlier steps 
something went wrong which can be verified via the log file.


Cheers

Christoph

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

__ Información de NOD32, revisión 2400 (20070716) __

Este mensaje ha sido analizado con  NOD32 antivirus system
http://www.nod32.com





  

 


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

__ Información de NOD32, revisión 2402 (20070717) __

Este mensaje ha sido analizado con  NOD32 antivirus system
http://www.nod32.com





   




___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

__ Información de NOD32, revisión 2402 (20070717) __

Este mensaje ha sido analizado con  NOD32 antivirus system
http://www.nod32.com



 



[vdr] starting sh -c 'vdrburn-dvd.sh render' (pid = 23706)
[render] + set -e
[render] + '[' -z ']'
[render] + export JAVA_HOME=/usr/lib/jvm/java-1.5.0-sun/jre/
[render] + JAVA_HOME=/usr/lib/jvm/java-1.5.0-sun/jre/
[render] + '[' -z ']'
[render] + export PROJECTX_HOME=/usr/share/projectx
[render] + PROJECTX_HOME=/usr/share/projectx
[render] + unset SUDO_COMMAND
[render] + echo 'Script invokation: render'
[render] Script invokation: render
[render] + case $1 in
[render] + png2yuv -j /videoteca/v0/vdr-burn.Docs.dExVU5/menu-bg-0.png -f 25 -n 
1 -I t -L 1
[render]INFO: [png2yuv] Parsing  checking input files.
[render] + mpeg2enc -f 8 -n p -o 
/videoteca/v0/vdr-burn.Docs.dExVU5/menu-background.m2v
[render]INFO: [mpeg2enc] SETTING EXTENDED MMX for MOTION!
[render]INFO: [mpeg2enc] SETTING SSE and MMX for TRANSFORM!
[render]INFO: [mpeg2enc] SETTING EXTENDED MMX for PREDICTION!
[render]INFO: [png2yuv] Image dimensions are 720x576
[render]INFO: [png2yuv] Movie frame rate is:  25.00 frames/second
[render]INFO: [png2yuv] Interlaced frames, top field first.
[render]INFO: [png2yuv] Frame size:  720 x 576
[render]INFO: [png2yuv] Now generating YUV4MPEG stream.
[render]INFO: [mpeg2enc] Selecting DVD output profile
[render] ++ WARN: [mpeg2enc] No aspect ratio specifed and no guess possible: 
assuming 4:3 display

[vdr] vdr-burn vdrconver segmentation fault

[Leo Márquez]

Hi,

I'm desperated with this problem. I can't do dvd's from my vdr recordings.
I have tried with vdr-burn and vdrconvert-vdr2dvd.
I'm using debian etch, kernel 2.6.17.13, vdr 1.4.3

My 0.1 vdrconvert log:

STAT: Processing 
/conversiones/tmp/vdr2dvd/12616/DVDMENU/Titel-1/spu-submenu-1.mpg...

STAT: VOBU 0 at 0MB, 1 PGCS^M
/usr/local/bin/vdr2dvd.sh: line 583: 20156 Segment faultnice -n 
$PRIO $DVDAUTHOR -x ${UniqueMENUDIR}/dvd.xml

ERROR : Fehler bei dvdauthor -x. rc=139
NOTICE : exit!
Aufruf /usr/local/bin/postvdr2dvd.sh mit parameter :
24-02-2007 21:48:35 : Session /usr/local/bin/vdr2dvd.sh Exit

My cvs vdr-burn log:

[mplex] + mplex -f 8 -S 0 -M -o 
/tmp/vdr-burn.Planeta_Tierra__Bosques.4vMnLU/VDRSYNC.0/movie.mpg 
/tmp/vdr-burn.Planeta_Tierra__Bosques.4vMnLU/VDRSYNC.0/vdrsync.mpv 
/tmp/vdr-burn.Planeta_Tierra__Bosques.4vMnLU/VDRSYNC.0/vdrsync0.mpa 
/tmp/vdr-burn.Planeta_Tierra__Bosques.4vMnLU/VDRSYNC.0/vdrsync1.mpa
[mplex]INFO: [mplex] mplex version 1.8.0 (2.2.4 $Date: 2005/08/28 
17:50:54 $)
[author] /usr/bin/vdrburn-dvd.sh: line 45:  4944 Segment fault
dvdauthor -x $DVDAUTHOR_XML

[vdr] process author (pid = 4939) exited gracefully (exit code 139)
[vdr] process author exited
[vdr] ERROR: process demux (pid = 4937) crashed (signal 15)
[vdr] ERROR: process mplex (pid = 4938) crashed (signal 15)

Any help would be apreciated.
Thanks,

Leo.

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Re: [vdr] softdevice and epia tv-out problem with Xorg

[Leo Márquez]

Hi Stefan, thanks for your patch!!.
Now I can start and toggle between fullscreen and windowed modes without 
problems.
This patch will be included in cvs version or I have to apply to every 
new release?

But I still with black screen. Now the syslog says:

Nov  5 20:35:16 dori vdr: [4461] [XvVideoOut]: XV_SWOV: available ports 
68 - 68
Nov  5 20:35:16 dori vdr: [4461] [XvVideoOut]: XV_SWOV: format 
0x30323449 is NOT in format list:

Nov  5 20:35:16 dori vdr: [4461] [XvVideoOut]:   0x32595559[YUY2]
Nov  5 20:35:16 dori vdr: [4461] [XvVideoOut]:   0x32315659[YV12]
Nov  5 20:35:16 dori vdr: [4461] [XvVideoOut]:   0x434d5658[VIA]
Nov  5 20:35:16 dori vdr: [4461] [XvVideoOut]:   0x35315652[RV15]
Nov  5 20:35:16 dori vdr: [4461] [XvVideoOut]:   0x36315652[RV16]
Nov  5 20:35:16 dori vdr: [4461] [XvVideoOut]:   0x32335652[RV32]
Nov  5 20:35:16 dori vdr: [4461] [XvVideoOut]: (ERROR) could not grab 
any port! No video possible!


I'm lost. I have reinstalled libavformat and recompiled softdevic 
plugins. What means this error?
In osd I don't get any error and vdr not crashes. I use streamdev-client 
and in the server I see corrects attach and detach.


Thanks in advance.


Stefan Lucke escribió:


On Donnerstag 02 November 2006 23:38, Stefan Lucke wrote:
 


Quoting Leo Márquez:

   


Hi again,

Stefan Lucke escribió:

 


/ But after started it without problems now I get:
 


//
// [softdevice] A/V devices initialized, now initializing MPEG2 Decoder
// X Error of failed request:  BadValue (integer parameter out of range for
// operation)
//   Major opcode of failed request:  145 (MIT-SHM)
// Minor opcode of failed request:  3 (X_ShmPutImage)
//   Value in failed request:  0x3ff
/
Which are the startup options now ?
0x3ff = 1023 = 1024 - 11


   


My startup options are only -vo xv:full

 


Did you changed your X resolution via ALT+CTRL+Keypad + ?


   


No but I press the 'f' key to toggle between fullscreen and windowed vdr
mode.
The second time I run vdr with -vo xv:full don't work
 


Ah, I should have mentioned that you _must_ not toggle full screen -
windowed mode, as windowed mode works with some default values
which even did not work previously (thats why I ask for full screen mode).

I'll send you a patch tomorrow that will restrict these values.

   



Ok, here comes the patch. I tested it with 640x480 resolution and now I do not
get these failed request any more. In contrast to your setup, mine worked fine
when setting softdevice.OSDalphablend = 1  in vdr's setup.conf even
without the patch.

 




Index: video-xv.c
===
RCS file: /cvsroot/softdevice/softdevice/video-xv.c,v
retrieving revision 1.63
diff -U3 -r1.63 video-xv.c
--- video-xv.c  29 Sep 2006 19:17:18 -  1.63
+++ video-xv.c  3 Nov 2006 18:29:54 -
@@ -862,6 +862,23 @@
}
  }
#endif
+
+  /* -
+   * limit widht and height to screen dimensions
+   */
+  {
+  int  screen_width, screen_height;
+
+screen_width  = DisplayWidth(dpy, scn_id);
+screen_height = DisplayHeight(dpy, scn_id);
+
+if (height  screen_height)

+  old_dheight = lheight = dheight = height = screen_height;
+
+if (width  screen_width)
+  old_dwidth = lwidth = dwidth = width = screen_width;
+  }
+
  /* -
   * default settings which allow arbitraray resizing of the window
   */
 




___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


__ Información de NOD32, revisión 1.1832 (20061025) __

Este mensaje ha sido analizado con  NOD32 antivirus system
http://www.nod32.com

 




___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Re: [vdr] softdevice and epia tv-out problem with Xorg

[Leo Márquez]

Hi again,

Probably caused by this problem softdevice always starts suspended but I 
can't change to playing. When I try it always kept the suspended state.


Thanks.

Leo Márquez escribió:


Hi Stefan, thanks for your patch!!.
Now I can start and toggle between fullscreen and windowed modes 
without problems.
This patch will be included in cvs version or I have to apply to every 
new release?

But I still with black screen. Now the syslog says:

Nov  5 20:35:16 dori vdr: [4461] [XvVideoOut]: XV_SWOV: available 
ports 68 - 68
Nov  5 20:35:16 dori vdr: [4461] [XvVideoOut]: XV_SWOV: format 
0x30323449 is NOT in format list:

Nov  5 20:35:16 dori vdr: [4461] [XvVideoOut]:   0x32595559[YUY2]
Nov  5 20:35:16 dori vdr: [4461] [XvVideoOut]:   0x32315659[YV12]
Nov  5 20:35:16 dori vdr: [4461] [XvVideoOut]:   0x434d5658[VIA]
Nov  5 20:35:16 dori vdr: [4461] [XvVideoOut]:   0x35315652[RV15]
Nov  5 20:35:16 dori vdr: [4461] [XvVideoOut]:   0x36315652[RV16]
Nov  5 20:35:16 dori vdr: [4461] [XvVideoOut]:   0x32335652[RV32]
Nov  5 20:35:16 dori vdr: [4461] [XvVideoOut]: (ERROR) could not grab 
any port! No video possible!


I'm lost. I have reinstalled libavformat and recompiled softdevic 
plugins. What means this error?
In osd I don't get any error and vdr not crashes. I use 
streamdev-client and in the server I see corrects attach and detach.


Thanks in advance.


Stefan Lucke escribió:


On Donnerstag 02 November 2006 23:38, Stefan Lucke wrote:
 


Quoting Leo Márquez:

  


Hi again,

Stefan Lucke escribió:




/ But after started it without problems now I get:



//
// [softdevice] A/V devices initialized, now initializing MPEG2 
Decoder
// X Error of failed request:  BadValue (integer parameter out of 
range for

// operation)
//   Major opcode of failed request:  145 (MIT-SHM)
// Minor opcode of failed request:  3 (X_ShmPutImage)
//   Value in failed request:  0x3ff
/
Which are the startup options now ?
0x3ff = 1023 = 1024 - 11


  


My startup options are only -vo xv:full




Did you changed your X resolution via ALT+CTRL+Keypad + ?


  


No but I press the 'f' key to toggle between fullscreen and 
windowed vdr

mode.
The second time I run vdr with -vo xv:full don't work



Ah, I should have mentioned that you _must_ not toggle full screen -
windowed mode, as windowed mode works with some default values
which even did not work previously (thats why I ask for full screen 
mode).


I'll send you a patch tomorrow that will restrict these values.

  



Ok, here comes the patch. I tested it with 640x480 resolution and now 
I do not
get these failed request any more. In contrast to your setup, mine 
worked fine

when setting softdevice.OSDalphablend = 1  in vdr's setup.conf even
without the patch.

 




Index: video-xv.c
===
RCS file: /cvsroot/softdevice/softdevice/video-xv.c,v
retrieving revision 1.63
diff -U3 -r1.63 video-xv.c
--- video-xv.c29 Sep 2006 19:17:18 -1.63
+++ video-xv.c3 Nov 2006 18:29:54 -
@@ -862,6 +862,23 @@
}
  }
#endif
+
+  /* 
- 


+   * limit widht and height to screen dimensions
+   */
+  {
+  int  screen_width, screen_height;
+
+screen_width  = DisplayWidth(dpy, scn_id);
+screen_height = DisplayHeight(dpy, scn_id);
++if (height  screen_height)
+  old_dheight = lheight = dheight = height = screen_height;
+
+if (width  screen_width)
+  old_dwidth = lwidth = dwidth = width = screen_width;
+  }
+
  /* 
- 


   * default settings which allow arbitraray resizing of the window
   */
 




___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr


__ Información de NOD32, revisión 1.1832 (20061025) __

Este mensaje ha sido analizado con  NOD32 antivirus system
http://www.nod32.com

 




___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

__ Información de NOD32, revisión 1.1852 (20061103) __

Este mensaje ha sido analizado con  NOD32 antivirus system
http://www.nod32.com






___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Re: [vdr] softdevice and epia tv-out problem with Xorg

[Leo Márquez]

Hi again,

Stefan Lucke escribió:


/ But after started it without problems now I get:

//
// [softdevice] A/V devices initialized, now initializing MPEG2 Decoder
// X Error of failed request:  BadValue (integer parameter out of range for
// operation)
//   Major opcode of failed request:  145 (MIT-SHM)
// Minor opcode of failed request:  3 (X_ShmPutImage)
//   Value in failed request:  0x3ff
/
Which are the startup options now ?
0x3ff = 1023 = 1024 - 11
 


My startup options are only -vo xv:full


Did you changed your X resolution via ALT+CTRL+Keypad + ?
 

No but I press the 'f' key to toggle between fullscreen and windowed vdr 
mode.

The second time I run vdr with -vo xv:full don't work


can you show us the output of command xdpyinfo ?
 


My xdpyinfo output command Is here:

name of display::0.0
version number:11.0
vendor string:The X.Org Foundation
vendor release number:70101000
X.Org version: 7.1.1
maximum request size:  16777212 bytes
motion buffer size:  256
bitmap unit, bit order, padding:32, LSBFirst, 32
image byte order:LSBFirst
number of supported pixmap formats:7
supported pixmap formats:
   depth 1, bits_per_pixel 1, scanline_pad 32
   depth 4, bits_per_pixel 8, scanline_pad 32
   depth 8, bits_per_pixel 8, scanline_pad 32
   depth 15, bits_per_pixel 16, scanline_pad 32
   depth 16, bits_per_pixel 16, scanline_pad 32
   depth 24, bits_per_pixel 32, scanline_pad 32
   depth 32, bits_per_pixel 32, scanline_pad 32
keycode range:minimum 8, maximum 255
focus:  window 0x6e, revert to Parent
number of extensions:29
   BIG-REQUESTS
   DAMAGE
   DPMS
   Extended-Visual-Information
   GLX
   MIT-SCREEN-SAVER
   MIT-SHM
   MIT-SUNDRY-NONSTANDARD
   RANDR
   RENDER
   SECURITY
   SGI-GLX
   SHAPE
   SYNC
   TOG-CUP
   X-Resource
   XC-APPGROUP
   XC-MISC
   XFIXES
   XFree86-Bigfont
   XFree86-DGA
   XFree86-DRI
XFree86-Misc
   XFree86-VidModeExtension
   XInputExtension
   XKEYBOARD
   XTEST
   XVideo
   XVideo-MotionCompensation
default screen number:0
number of screens:1

screen #0:
 dimensions:720x576 pixels (183x146 millimeters)
 resolution:100x100 dots per inch
 depths (7):24, 1, 4, 8, 15, 16, 32
 root window id:0x47
 depth of root window:24 planes
 number of colormaps:minimum 1, maximum 1
 default colormap:0x20
 default number of colormap cells:256
 preallocated pixels:black 0, white 16777215
 options:backing-store NO, save-unders NO
 largest cursor:32x32
 current input event mask:0x58007f
   KeyPressMask KeyReleaseMask   ButtonPressMask
   ButtonReleaseMaskEnterWindowMask  LeaveWindowMask
   PointerMotionMaskSubstructureNotifyMask   
SubstructureRedirectMask

   PropertyChangeMask
 number of visuals:12
 default visual id:  0x22
 visual:
   visual id:0x22
   class:TrueColor
   depth:24 planes
   available colormap entries:256 per subfield
   red, green, blue masks:0xff, 0xff00, 0xff
   significant bits in color specification:8 bits
 visual:
   visual id:0x23
   class:TrueColor
   depth:24 planes
   available colormap entries:256 per subfield
   red, green, blue masks:0xff, 0xff00, 0xff
   significant bits in color specification:8 bits
visual:
   visual id:0x24
   class:TrueColor
   depth:24 planes
   available colormap entries:256 per subfield
   red, green, blue masks:0xff, 0xff00, 0xff
   significant bits in color specification:8 bits
 visual:
   visual id:0x25
   class:TrueColor
   depth:24 planes
   available colormap entries:256 per subfield
   red, green, blue masks:0xff, 0xff00, 0xff
   significant bits in color specification:8 bits
 visual:
   visual id:0x26
   class:TrueColor
   depth:24 planes
   available colormap entries:256 per subfield
   red, green, blue masks:0xff, 0xff00, 0xff
   significant bits in color specification:8 bits
 visual:
   visual id:0x27
   class:TrueColor
   depth:24 planes
   available colormap entries:256 per subfield
   red, green, blue masks:0xff, 0xff00, 0xff
   significant bits in color specification:8 bits
 visual:
   visual id:0x28
   class:TrueColor
   depth:24 planes
   available colormap entries:256 per subfield
   red, green, blue masks:0xff, 0xff00, 0xff
   significant bits in color specification:8 bits
 visual:
   visual id:0x29
   class:TrueColor
   depth:24 planes
   available colormap entries:256 per subfield
   red, green, blue masks:0xff, 0xff00, 0xff
significant bits in color specification:8 bits
 visual:
   visual id:0x2a
   class:TrueColor
   depth:24 planes
   available colormap entries:256 per subfield
   red, green, blue masks:0xff, 0xff00, 0xff
   significant bits in color specification:8 bits
 visual:
   visual id:0x2b
   class:

Re: [vdr] softdevice and epia tv-out problem with Xorg

[Leo Márquez]

Hi again,

I have found this
topic in vdrportal that I have translated with google to english.
But I don't understand yet what is the problem.
I'll try to recompile softdevice.

I'm using debian, softdevice cvs and vdr 1.4.3.

Thanks.


Leo Mrquez wrote:
Hi!,
  
  
Recently I have connected my vdr box to my CRT 16:9 TV. I use the
s-video(I want to use the rca tv-out for digital audio) connector of my
epia M.1.
  
  
I have followed some instructions to configure xorg with s-video out
from this page:
  
  
http://www.kingcot.eclipse.co.uk/unichrome/unichromeTvOut.html
  
  
I don't know if this url is up to date.
  
I have got see my wmaker desktop in my tv but when I start vdr with
softdevice I get:
  
  
[softdevice] initializing Plugin
  
[softdevice] Initializing Video Out
  
[softdevice] ffmpeg build(3345920)
  
[XvVideoOut]: osd_image shmid = 2686978
  
[XvVideoOut]: got osd_image: width 720 height 576, bytes per line 2880
  
[softdevice] Subplugin successfully opend
  
[softdevice] Video Out seems to be OK
  
[softdevice] Initializing Audio Out
  
[softdevice] Audio out seems to be OK
  
[softdevice] A/V devices initialized, now initializing MPEG2 Decoder
  
X Error of failed request: BadValue (integer parameter out of range
for operation)
  
Major opcode of failed request: 145 (MIT-SHM)
  
Minor opcode of failed request: 3 (X_ShmPutImage)
  
Value in failed request: 0x2ff
  
Serial number of failed request: 337
  
Current serial number in output stream: 338
  
  
I hope anyone could help me to solve this problem.
  
Another question...
  
Do you know any url to learn about epia-m1 s-video out and xorg?
  
  
Thanks.
  
  
  
  
  
___
  
vdr mailing list
  
vdr@linuxtv.org
  
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
  
  



-- 
Leo Mrquez
[ Enginyeria del Software - Internet ]
[ Calidae - www.calidae.com ]




___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Re: [vdr] desperated with vdr-burn

[Leo Márquez]

Lot of thanks!
I don't tested it yet, but when I go home I'll try it.
Seems to be a definitive solution for the problem.

Thanks again.


Tobias Grimm wrote:

Leo Márquez wrote:
  

vdr-burn still fail for me. :-(



Please forget my private mail. With a small hint from Sascha I found the
problem. The usage of $ in the format strings contained in the English
texts lead to a truncation of the string, because VDR uses $ to
separate a context string from the English translation. That's why I
didn't had this problem in German :-)

A fixed Debian package (version 0.1.0~pre21-4) is available in my
repository. Until it's fixed in the CVS, a patch can be downloaded here:

http://vdr-developer.org/mantisbt/view.php?id=184  (90_i18n-fix.dpatch.gz)

Tobias


  



--
Leo Márquez
[ Enginyeria del Software - Internet ]
[ Calidae - www.calidae.com ]


___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

[vdr] desperated with vdr-burn

[Leo Márquez]

Hi,

Finally I'm desperated with vdr-burn. Few days ago I exposed my problem 
but seems that I'm the one person that experience it.

The problem is boost related:

terminate called after throwing an instance of 'boost::io::too_many_args'
what():  boost::too_many_args: format-string refered to less arguments 
than were passed

Avortat

I have tried the libboost debian package and the boost-for-burn that 
readme says.


Is there any boost expert that can explain my problem? I can't believe 
that anyone known this problem.


I have recompiled vdr and plugins many times. I'm desperated with this 
problem amb my hard disk is full.


my vdr is 1.4.3
burn is cvs (I have tried it with pre-20 and pre-21 versions)

Thanks for your help.



___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Re: [vdr] demux fails in burn plugin

[Leo Márquez]

Hi and thanks for your answer,

Ville Skyttä escribió:


On Fri, 2006-10-13 at 20:55 +0200, Leo Márquez wrote:

 


Anyone has idea of this problem? From dvd.log:
   


[...]
 


[demux] Unknown parameter -v-filter
   


[...]
 


This parameters are called from vdrburn-dvd.sh
vdrsync is the last 0.1.2.2
burn version is cvs.

I need help please.
   



Your vdrsync.pl is too old, see the burn plugin's README.
 


You are right. I have readed more patiently the README file.
Now this error not happens.

A lot of thanks.

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

[vdr] burn(cvs) makes crash my vdr 1.4.2

[Leo Márquez]

Hi again,
I feel to be heavy with this subject but burn not work for me.
Now my vdr crashes just in the moment that burn plugin try to execute 
growisofs. I think this because the last line of dvd.log is:


[burn] + growisofs -use-the-force-luke=tty -dvd-compat -Z /dev/hdd -V 
'SABER Y GANAR~ ' -dvd-video 
/videoteca/v0/vdr-burn.SABER_Y_GANAR__.0PIDCV/DVDAUTHOR


Burn is cvs version, vdr is 1.4.2 and I use softdevice with xv output.
I have tried to execute the growisofs command from the shell and it works.
How can I know more about the crash?
The last syslog files don't say me anything...

Oct 14 19:52:03 vdr vdr: [5575] burn: process dmharchive (pid = 5605) 
exited gracefully (exit code 0)

Oct 14 19:52:03 vdr vdr: [5575] burn: process dmharchive exited
Oct 14 19:52:03 vdr vdr: [5575] burn: starting sh -c 'vdrburn-dvd.sh 
archivemark' (pid = 5619)

Oct 14 19:52:03 vdr vdr: [5619] burn: CONFIG_PATH=/etc/vdr/plugins/burn
Oct 14 19:52:03 vdr vdr: [5619] burn: 
DVDAUTHOR_PATH=/videoteca/v0/vdr-burn.SABER_Y_GANAR.s6ZCIs/DVDAUTHOR
Oct 14 19:52:03 vdr vdr: [5543] burn: no translation found for 'Job 
active (Converting)' in language 15 (Català)
Oct 14 19:52:03 vdr vdr: [5543] burn: no translation found for 'Cancel' 
in language 15 (Català)
Oct 14 19:52:03 vdr vdr: [5575] burn: process archivemark (pid = 5619) 
exited gracefully (exit code 0)

Oct 14 19:52:03 vdr vdr: [5575] burn: process archivemark exited
Oct 14 19:52:03 vdr vdr: [5624] burn: BURN_SPEED=0
Oct 14 19:52:03 vdr vdr: [5624] burn: DISC_ID=SABER Y GANAR
Oct 14 19:52:03 vdr vdr: [5575] burn: starting sh -c 'vdrburn-dvd.sh 
burndir' (pid = 5624)
Oct 14 19:52:03 vdr vdr: [5624] burn: 
DVDAUTHOR_PATH=/videoteca/v0/vdr-burn.SABER_Y_GANAR.s6ZCIs/DVDAUTHOR

Oct 14 19:52:03 vdr vdr: [5624] burn: DVD_DEVICE=/dev/hdd
Oct 14 19:52:04 vdr vdr: [5543] burn: no translation found for 'Job 
active (Writing: %1$d%%)' in language 15 (Català)

Oct 14 19:52:05 vdr kernel: cx88[0]/2: cx8802_restart_queue
Oct 14 19:52:05 vdr kernel: cx88[0]/2: cx8802_restart_queue: queue is empty

Thank you very much.

Leo.

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Re: [vdr] 451 Grab image failed v4l problem?

[Leo Márquez]

Hi,

Stone wrote:
On 9/12/06, *Leo Márquez* [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] 
wrote:


Hi again,

I have installed the last mercurial v4l version and the grab command
still not working.
Anyone knows what could be the problem?



Did you specify enabling the grab function in your vdr startup 
command? For example:


OPTIONS=-l 3 --grab=/tmp

Yes, I start with ./vdr -g /tmp

Leo

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Re: [vdr] karaoke vdr integration

[Leo Márquez]

Hi, ans thanks for your answer and for your work!!
In next days I try to get few time to test your plugin. Then I explain
my experience.
One question. The plugin sources use ultrastar sources or it's your own
code?
And another, It's possible add the mpg video file like ultrastar?

Thanks!!

Leo.

jlacvdr wrote:

Hi,

I start to develop a karaoke plugin to vdr. 
If you want to try it, download this beta version :

http://www.freewebs.com/jlacvdr/karaokestar/vdr-karaoke-0.0.0-pre1.tar.gz

Regards,




Le mardi 08 août 2006 à 11:15 +0200, Leo Márquez a écrit :
  

Hi,

Anyone know a karaoke piece of that can be well integrated with VDR?

I have seen pykaraoke but I don't know how integrate with vdr.

Another software that I would try is stepmania. It's not a karaoke 
software, is  a dance software. Anyone known it?


Thanks.

___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr





  



--
Leo Márquez
[ Enginyeria del Software - Internet ]
[ Calidae - www.calidae.com ]



___
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr