: Setting up the StandScan Pro
Hello everyone. I set up the Stand Scan. How do I place the stickers? I
think that I can put my finger on the under side of the camera hole and
position the camera. Then I could place the stickers on both sides of the
phone. I'm right handed. Which way should
Pro.
The long box holds 8 AA batteries and these are not supplied either.
So, you have the choice of connecting your StandScan Pro to mains
electricity, to a 12 v battery pack or to a 9 v battery.
Now to setting up your StandScan Pro. Lay the StandScan on a table as though
it were
Hello Paul,
Place the iPhone with the Home button to the right and with the camera facing
down through the hole. The phone should be parallel to the front edge of the
StandScan, about half an inch in. Test that the position is correct by scanning
a page. When the results are good, place the
the choice of connecting your StandScan Pro to mains
electricity, to a 12 v battery pack or to a 9 v battery.
Now to setting up your StandScan Pro. Lay the StandScan on a table as though
it were a large envelope with a flap that will open away from you. This flap
is held down by magnets so just
-
From: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf
Of Paul Hunt
Sent: Saturday, March 22, 2014 8:28 AM
To: viphone@googlegroups.com
Subject: Re: Setting up the StandScan Pro
Hello Anne. Thanks for your descriptions. I'll try setting up the Standscan
later today. I have
there is a switch on both.
If we can't look at ourselves, and ask, why? then where does the learning
start?
- Original Message -
From: Paul Hunt prhu...@att.net
To: viphone@googlegroups.com
Sent: Saturday, March 22, 2014 8:27 AM
Subject: Re: Setting up the StandScan Pro
Hello
that all three
boxes connect to the Standscan pro.
-Original Message-
From: viphone@googlegroups.com [mailto:viphone@googlegroups.com] On Behalf
Of Anne Robertson
Sent: Sunday, March 16, 2014 5:58 PM
To: viphone@googlegroups.com viphone@googlegroups.com
Subject: Setting up the StandScan Pro
of connecting your StandScan Pro to mains electricity,
to a 12 v battery pack or to a 9 v battery.
Now to setting up your StandScan Pro. Lay the StandScan on a table as though
it were a large envelope with a flap that will open away from you. This flap is
held down by magnets so just pull it up.
You
You use your own batteries. It is simply a holder.
Andy
-Original Message-
From: Paul Hunt
Sent: Thursday, March 20, 2014 11:41 AM
To: viphone@googlegroups.com
Subject: RE: Setting up the StandScan Pro
Hello everyone. I got my Standscan pro today and have some questions. First,
I've
up the StandScan Pro
Hello everyone,
Here is a description of how to set up the StandScan Pro that I posted
almost a year ago.
Lay the folded StandScan on a table with the small flap away from you.
Open the small flap and fold back the body of the StandScan towards you.
Now the topmost piece
at ourselves, and ask, why? then where does the learning
start?
- Original Message -
From: Anne Robertson annefromo...@gmail.com
To: viphone@googlegroups.com
Sent: Sunday, March 16, 2014 4:58 PM
Subject: Setting up the StandScan Pro
Hello everyone,
Here is a description of how
Hello everyone,
Here is a description of how to set up the StandScan Pro that I posted almost a
year ago.
Lay the folded StandScan on a table with the small flap away from you.
Open the small flap and fold back the body of the StandScan towards you.
Now the topmost piece should open to the
12 matches
Mail list logo