Re: [Vo]:E-Cat guy: Hire a local HVAC engineering company!

24 hours of COP 6 powered mode operation from a single E-Cat reactor, driving steam into a heat exchanger with 1 second data logging is fine by me. One engineer in Nasa may not agree but that is his opinion and not mine. I'm more concerned about shutting down a runaway reactor as Murphy and I a

Re: [Vo]:E-Cat guy: Hire a local HVAC engineering company!

On 11/21/2011 4:32 AM, Jed Rothwell wrote: I asked Martin what the hell happened to the materials from the table and the floor. Did they save samples of them? He said no, they didn't. Any photos? No, they didn't bother taking any. It reminds me of the time when Mizuno scraped off black material

Re: [Vo]:E-Cat guy: Hire a local HVAC engineering company!

I have a trusted friend, a very experienced metal fabrication engineer, who has built BIG boilers, who is Italian but Aussie born. He will probably come along as he speaks the lingo and can arrange the 100 kW test with the local engineering firm, if their English is not that good. Additionally

Re: [Vo]:E-Cat guy: Hire a local HVAC engineering company!

To an engineer it is just another Black Box with inputs and outputs. The only give away that a LENR reaction is occurring inside the Black Box is the COP is greater than 1. Any HVAC engineer or firm would give their last Euro to test this device as they will get high ground for any future work.

Re: [Vo]:E-Cat guy: Hire a local HVAC engineering company!

, Aussie Guy E-Cat mailto:aussieguy.e...@gmail.com>> wrote: Good luck, Aussie, getting near it much less testing one. Or do you know any potential customer that has? Does Jed know anyone who privately tested the E-cat correctly and came away with positive results? Maybe actually ordered one

Re: [Vo]:To me, this is scary

:24, schrieb Aussie Guy E-Cat: To me this statement made by Professor Levi about the 18 hour test he and Rossi did is scary: http://www.nyteknik.se/nyheter/energi_miljo/energi/article3108242.ece “/*Minimum power was 15 kilowatts, and that’s a conservative value. I calculated it several times. At

Re: [Vo]:To me, this is scary

You are assuming the reactor heat exchanger surface temperature went up immediately. I doubt that happened as there is thermal mass involved, a water cooled heat sink with a very low thermal resistance and if it happened like that, the core would probably have melted as it could not get rid of

Re: [Vo]:E-Cat guy: Hire a local HVAC engineering company!

Mary failed to accurately read what they actually said about that transaction. I have pointed this out to Mary before. What Defkalion said was they had the funds ready but Rossi failed to complete the contract. Apparently no money changed hands. AG On 11/21/2011 6:50 AM, Jed Rothwell wrote:

Re: [Vo]:E-Cat guy: Hire a local HVAC engineering company!

What you wrote is so full of incorrect statements as to finally label you as a confirmed basher. The heat storage theory has been totally busted. The E-Cat was lifted off the table and onto a scale to measure the pre test weight. There is no way any heat storage could have been hidden during th

Re: [Vo]:its been great

If we ALL stop responding to MY, MY will get bored and go away. AG On 11/21/2011 7:29 AM, Esa Ruoho wrote: you guys had a real nice list going. then mary yugo joined. im out of here.

Re: [Vo]:To me, this is scary

melted first. AG On 11/21/2011 7:57 AM, Jed Rothwell wrote: Aussie Guy E-Cat <mailto:aussieguy.e...@gmail.com>> wrote: 130 kWs of heat coming from something the size of a small door knob is really scary. How about burning gasoline? Not sure what the power density is. Anyway, I

[Vo]:Rossi replies to my email

"Dear Sirs, We are selling only 1 MW thermal plants, so far. Warm Regards, A.R." While I do understand what a full order book can do, it is disappointing to say the least. So much for his 100 kW min size offer. May still be doable but not until Feb 2012. AG

[Vo]:Re: Rossi replies to my email

On 11/21/2011 12:05 PM, Aussie Guy E-Cat wrote: "Dear Sirs, We are selling only 1 MW thermal plants, so far. Warm Regards, A.R." While I do understand what a full order book can do, it is disappointing to say the least. So much for his 100 kW min size offer. May still be doable but

Re: [Vo]:Re: Rossi replies to my email

Alan J Fletcher wrote: At 11:31 PM 11/20/2011, Aussie Guy E-Cat wrote: We are ready to pay you USD250,000 for the 5 diathermic oil E-Cat modules and the control system. Do we now have a workable proposal? Sorry he's ummm ... changed his mind. As always our discussions are Commercial in

Re: [Vo]:Rossi replies to my email

$200k for a 100 kW plant I can fund as I believe LENR is real. $2,000k for a 1 MW plant will take some time and more LENR proof than I currently have. AG On 11/21/2011 9:00 PM, Akira Shirakawa wrote: On 2011-11-21 02:35, Aussie Guy E-Cat wrote: "Dear Sirs, We are selling only 1 MW th

Re: [Vo]:Rossi replies to my email

I observe their blog. Lets see what they have when they reveal their specs and have public Black Box test results like Rossi has. As for unit prices, why would they go more than say 10% below Rossi's price? Anything above COP 10 will have little influence on buying choice as the input energy co

[Vo]:Interesting next 12 months

It should be an interesting next 12 months with at least 2 companies selling LENR systems. I also note that both the EmDrive (Chinese claim to have replicated) and the QDrive reactionless space drives apparently work and will cause a few cracks in the set in concrete Laws. One wonders if the De

Re: [Vo]:Interesting next 12 months

3404854 Ron Kita Doylestown PA Ad Astra On Mon, Nov 21, 2011 at 11:00 AM, Aussie Guy E-Cat mailto:aussieguy.e...@gmail.com>> wrote: It should be an interesting next 12 months with at least 2 companies selling LENR systems. I also note that both the EmDrive (Chinese claim to have repl

Re: [Vo]:Interesting next 12 months

Must say that for once we agree that the test protocol needs significant improvement. However both the EmDrive and the QDrive seem to work. AG On 11/22/2011 3:22 AM, Mary Yugo wrote: On Mon, Nov 21, 2011 at 8:33 AM, Aussie Guy E-Cat mailto:aussieguy.e...@gmail.com>> wrote: J

Re: [Vo]:Interesting next 12 months

Aussie Guy E-Cat <mailto:aussieguy.e...@gmail.com>> It should be an interesting next 12 months with at least 2 companies selling LENR systems. I also note that both the EmDrive (Chinese claim to have replicated) and the QDrive reactionless space drives apparently work

Re: [Vo]:Interesting next 12 months

Again we agree. As we seem to be on a roll, care to make it a hat trick? AG On 11/22/2011 2:45 AM, Mary Yugo wrote: On Mon, Nov 21, 2011 at 8:00 AM, Aussie Guy E-Cat mailto:aussieguy.e...@gmail.com>> wrote: It should be an interesting next 12 months with at least 2 com

Re: [Vo]:Interesting next 12 months

I did follow up on what G. Harry Stine observed in a long steel rod: http://www.rexresearch.com/dean/stine.htm Stine was only one of a few that ever saw the Dean Drive in the flesh. I have searched for but never found a video of the Dean Drive demo on the Dave Garroway Today Show. I'm sure ther

Re: [Vo]:Interesting next 12 months

te me. Dave -Original Message- From: Aussie Guy E-Cat To: vortex-l Sent: Mon, Nov 21, 2011 12:06 pm Subject: Re: [Vo]:Interesting next 12 months For inquiring minds: Dean Drive:http://en.wikipedia.org/wiki/Dean_drive http://www.jerrypournelle.com/science/dean.html EmDrive:http://emdriv

[Vo]:Stremmenos comments on Rossi and Deflakion

http://www.journal-of-nuclear-physics.com/?p=516&cpage=14#comment-125963 "Ch Stremmenos November 21st, 2011 at 5:13 AM Caro Andrea DC carry my remarks on a paper "CACIATORI OF COLD FUSION" published yesterday in the n

Re: [Vo]:Rossi's interview with "Tom and Doug"

Interesting information direct from the Rossi interview: First customer is located in the US (Rossi has already said the customer is military), they are preparing the site to install the first plant, It will heat a building, Rossi will attend to oversee the installation and do the maintenance.

Re: [Vo]:Rossi's interview with "Tom and Doug"

More info from the radio interview. 50 staff, small E-Cat in 1 year, not 2 years, with electricity, heat and cold generation, large plant $500 / kW of heat in 1 year. AG On 11/22/2011 1:58 PM, Aussie Guy E-Cat wrote: Interesting information direct from the Rossi interview: First customer is

Re: [Vo]:Rossi's interview with "Tom and Doug"

Rossi said the customer for the 13 x 1 MW plants was the same as the first customer: "Italo 1. November 18th, 2011 at 3:24 PM Dear Ing. Rossi, you have written: “WE ARE MANUFACTURING 13 1MW THERMAL PLANTS L

Re: [Vo]:Rossi's interview with "Tom and Doug"

badly played drums echoing off the walls of the probably solid stone / brick house. Went through that with a Guitar player. Pity his drums if he takes out this frustration on them. AG On 11/22/2011 3:11 PM, Jed Rothwell wrote: Aussie Guy E-Cat <mailto:aussieguy.e...@gmail.com>> wrote:

Re: [Vo]:Rossi's interview with "Tom and Doug"

obert Leguillon mailto:robert.leguil...@hotmail.com>> wrote: /purely rumor-mongering/ The military customer that starts with an "N" is NATO. The 14 plants will be distributed among half of the NATO membership; the U.S. was just first-in-line. /purely rumor-mo

[Vo]:Rossi opens 10 KW expression of interest list and sets 10 kW price

http://www.journal-of-nuclear-physics.com/?p=510&cpage=34#comment-126867 * Andrea Rossi November 21st, 2011 at 11:25 PM Dear Felipe From Chile: You are right, we are organizing this. BY THE WAY: WE COLL

Re: [Vo]:Rossi opens 10 KW expression of interest list and sets 10 kW price

electricity price rises to $0.01 / kWh. Good bye grid. It all changes. AG On 11/22/2011 7:20 PM, Aussie Guy E-Cat wrote: http://www.journal-of-nuclear-physics.com/?p=510&cpage=34#comment-126867 * Andrea Rossi November 21st, 2011 at 11:25 PM <http://www.journal-of-nuclear-physics.com

Re: [Vo]:Rossi opens 10 KW expression of interest list and sets 10 kW price

011 at 10:14 AM, Aussie Guy E-Cat mailto:aussieguy.e...@gmail.com>> wrote: Just placed my order for 10 x 10 kW plants. Will install them, at no cost in my, by children and by friends homes. Rossi said in the radio interview that they had cleared the certification issues and t

Re: [Vo]:Rossi opens 10 KW expression of interest list and sets 10 kW price

We have started a process to build trust and prove reliability. I suggest that by the time Rossi is asking for money, there will be more than ample proof. AG On 11/23/2011 1:07 AM, James Bowery wrote: How are you going to deal with this risk, Aussie Guy?

Re: [Vo]:Rossi opens 10 KW expression of interest list and sets 10 kW price

My intent to order has been acknowledged. No number in the queue was given. I have more doubts about Defkalion than Rossi. AG On 11/23/2011 1:38 AM, Terry Blanton wrote: On Tue, Nov 22, 2011 at 4:14 AM, Aussie Guy E-Cat wrote: Just placed my order for 10 x 10 kW plants. Have you received

Re: [Vo]:Rossi to come to the Massachusetts State House tomorrow

Maybe because it works as claimed and MIT wants to gain the academic high ground by verifying Rossi and then asking the US gov for LOTS of research money to study and improve the reaction? Think about thousands of container ships full of US made E-Cats sailing to all points of the compass. With

Re: [Vo]:Rossi to come to the Massachusetts State House tomorrow

What do you think the 1 MW test was? It was independent testing and verification. You think the same US military research contractor that bought the first reactor ordered 13 more 1 MW reactors because they were not satisfied with the results of their tests? We have NO idea of what is really hap

Re: [Vo]:A U.S.P.O. policy regarding cold fusion

It has been said it is difficult for a man to believe what his paycheck demands he not believe. AG On 11/23/2011 9:54 AM, Joshua Cude wrote: All that cold fusion literature was available to the DOE panel of 18 experts, and they judged that the occurrence of low energy nuclear reactions is no

Re: [Vo]:A U.S.P.O. policy regarding cold fusion

6 Yes, 10 No and 2 undecided. Wonder how they would vote today? AG On 11/23/2011 11:36 AM, Jed Rothwell wrote: de Bivort Lawrence mailto:ldebiv...@gmail.com>> wrote: Joshua, when did the DOE panel you refer to take place? See: http://lenr-canr.org/Collections/DoeReview.htm Panel opin

[Vo]:New Warnings of Hydrovolcanic Explosion at Fukushima

New Warnings of Hydrovolcanic Explosion at Fukushima http://1723news.wordpress.com/2011/11/23/new-warnings-of-hydrovolcanic-explosion-at-fukushima/ Just remember this is 3 reactors going China Syndrome and not just one as in 3 mile or the Russian reactor. http://www.youtube.com/watch?feature=pl

Re: [Vo]:New Warnings of Hydrovolcanic Explosion at Fukushima

:28 PM, Terry Blanton wrote: On Tue, Nov 22, 2011 at 9:39 PM, Aussie Guy E-Cat wrote: New Warnings of Hydrovolcanic Explosion at Fukushima http://1723news.wordpress.com/2011/11/23/new-warnings-of-hydrovolcanic-explosion-at-fukushima/ Just remember this is 3 reactors going China Syndrome and not

Re: [Vo]:New Warnings of Hydrovolcanic Explosion at Fukushima

Apparently it has burned through the containment vessels and the concrete floor in the 3 damaged reactors. Radioactive steam is coming up from cracks in the ground around the 3 damaged reactors. Watch the youtube video. It was made several months ago. The interview with Uehara Haruo happened 17

Re: [Vo]:Rossi's interview with "Tom and Doug"

The left or right hand / index finger thing was just a cheap shot from those that are rapidly loosing the spin war and are grabbing at any thing they can find to try to suggest Rossi is a scammer and fraud. BTW I was personally emailed by Rossi that he has accepted by 10 x 10 kW home E-Cat ord

Re: [Vo]:A U.S.P.O. policy regarding cold fusion

You don't get it do you? That event took place in 2004. Not Nov 2011. It has no bearing on where we are today. End of discussion. AG On 11/23/2011 5:52 PM, Joshua Cude wrote: There was no simple vote, so this is an interpretation of what they wrote, based on a question you don't mention.

Re: [Vo]:Rossi's interview with "Tom and Doug"

You know nothing, just your negative spin. AG On 11/23/2011 9:12 PM, Joshua Cude wrote: On Wed, Nov 23, 2011 at 1:24 AM, Aussie Guy E-Cat mailto:aussieguy.e...@gmail.com>> wrote: rapidly loosing the spin war As long as it's a spin war, Rossi's losing.

Re: [Vo]:New Warnings of Hydrovolcanic Explosion at Fukushima

Well we now know there your loyalties lay. HOT FISSION. AG On 11/23/2011 7:52 PM, Joshua Cude wrote: On Tue, Nov 22, 2011 at 8:39 PM, Aussie Guy E-Cat mailto:aussieguy.e...@gmail.com>> wrote: So much for Hot Fission saving the planet. The biggest tragedy of Fukushima is n

Re: [Vo]:Re: Rossi Interview Questions

And they want $49 to listen to the interview. AG On 11/24/2011 11:14 AM, Alan J Fletcher wrote: Just for completeness : PREMIUM CONTENT Rossi's e-Cat Goes Commercial Italian engineer Andrea Rossi, inventor of the e-Catalyst energy system, talks

[Vo]:Hyperion product range?

http://peakoil.com/forums/the-cold-fusion-thread-pt-3-merged-t63441-450.html#p1091080 "Hyperion products have different configurations, most notably: Series A: Single tube single module CHP: with this configuration, 5-10Kw heat power will be released to operate micro-CHP/micro turbine configur

Re: [Vo]:Hyperion product range?

Found the 23 June 2011 link: http://www.blog.telecomfuturecentre.it/2011/06/23/defkalion-green-technologies-announces-plans-for-the-rossi-energy-catalyzer/ AG On 11/24/2011 12:51 PM, Aussie Guy E-Cat wrote: http://peakoil.com/forums/the-cold-fusion-thread-pt-3-merged-t63441-450.html#p1091080

Re: [Vo]:Hyperion product range?

Had not seen that before. Thanks AG On 11/24/2011 12:58 PM, Frank Acland wrote: This comes from the DGT profile on their site : http://www.defkalion-energy.com/White_Paper_DGT.pdf On Wed, Nov 23, 2011 at 8:21 PM, Aussie Guy E-Cat mailto:aussieguy.e...@gmail.com>> wrote:

Re: [Vo]:Hyperion product range?

I have a market opportunity for 100s MWs of Green diathermic oil plant. From what I can currently see Rossi is the only supplier that may be able to deliver. I found this paper to be extremely useful: http://www.defkalion-energy.com/Report_Kullander_April_6_2011.pdf as it leave no doubt that wh

Re: [Vo]:Short report on Kullander's cold fusion lecture

Eric have you reviewed this report: http://www.defkalion-energy.com/Report_Kullander_April_6_2011.pdf Either Rossi, Levi, Kullander, Essen, Leonardi, Focardi and Bianchini are lying about the results or it is real. For me this is way better proof that Rossi does have a working and stable LENR r

Re: [Vo]:Report on Rossi's visit to Boston

As a potential purchaser, I have had no problems with Rossi agreeing for us to test our E-Cat. $2m is pocket change for MIT. I suggest there a lot more that went on than what has been revealed. Many US based LENR firms will be doing everything they can, calling up all their IOUs to slow Rossi d

[Vo]:Focardi reveal Iron is also involved

http://www.youtube.com/watch?feature=player_embedded&v=2cOEHQmnG-I#t=106s

Re: [Vo]:Focardi reveal Iron is also involved

uot;. On Thu, Nov 24, 2011 at 10:56 AM, Aussie Guy E-Cat mailto:aussieguy.e...@gmail.com>> wrote: http://www.youtube.com/watch?feature=player_embedded&v=2cOEHQmnG-I#t=106s <http://www.youtube.com/watch?feature=player_embedded&v=2cOEHQmnG-I#t=106s>

Re: [Vo]:Kullander Nov. 23 lecture slides (mostly in Swedish)

I did say I was not going to reply to you but your last statement is just 100% BS. The reactor and the Blue Box sat on a table. There was ONE power cord that was plugged into the wall. It went to the Blue Box (then the RFG was inside the Blue Box) and then to the reactor. There were no other po

Re: [Vo]:Report on Rossi's visit to Boston

Jed we don't know what happened at those meetings. All you have revealed it what one person said. There is a LOT more going on here that has been revealed. Rossi is old school Southern European and keeps his cards VERY close to his chest. Yanks blast everything all over the web. Very different

Re: [Vo]:Report on Rossi's visit to Boston

You are way beyond being an open minded doubter. AG On 11/25/2011 7:40 AM, Mary Yugo wrote: On Thu, Nov 24, 2011 at 1:05 PM, Aussie Guy E-Cat mailto:aussieguy.e...@gmail.com>> wrote: BTW Rossi has no problems with me doing Black Box testing of a E-Cat and he knows I'

Re: [Vo]:Rossi denies Defkalion has any technology-- again

Nothing like a really good Barossa Shiraz. AG On 11/25/2011 7:37 AM, Terry Blanton wrote: On Thu, Nov 24, 2011 at 3:38 PM, Mary Yugo wrote: If Rossi's kludge turns out to be really cold fusion, I'm going to become partial to absinthe. Absinthe makes the heart grow fonder. T

Re: [Vo]:Report on Rossi's visit to Boston

gotten your hands dirty in doing product development, to invent hypothetical BS to try to discredit the hard won yards of work Rossi and Focardi have done. AG On 11/25/2011 7:52 AM, Mary Yugo wrote: On Thu, Nov 24, 2011 at 1:14 PM, Aussie Guy E-Cat mailto:aussieguy.e...@gmail.com>>

Re: [Vo]:Report on Rossi's visit to Boston

We don't know that was what went down. AG On 11/25/2011 8:03 AM, Jed Rothwell wrote: A friend wrote to me: "Only Andrea could meet with a senator to ask for financial incentives to build a factory and refuse to allow them to test, huh?" - Jed

Re: [Vo]:Kullander Nov. 23 lecture slides (mostly in Swedish)

You think Levi, Kullander, Essen, Leonardi, Focardi and Bianchini are lying about the results or these people are idiots? What hidden wires? The mains cord went to the Blue Box and then to the reactor. Everything was visible. Look at the photos. What not checking for hidden wires? You can see e

Re: [Vo]:Kullander Nov. 23 lecture slides (mostly in Swedish)

Exactly. AG On 11/25/2011 7:42 AM, Mark Iverson-ZeroPoint wrote: Agreed AG! In fact, on several of the earlier tests, the reactor was lifted up off of the table so one could see that there were no hidden wires or pipes attached. SO, there are only two possibilities here: 1) Mary is aware of

Re: [Vo]:Report on Rossi's visit to Boston

I have not found any strange behavior in my commercial dealings with Rossi. I totally understand and accept what he asks of his customers and he accepts my requirements on him. I know he works 16 hours a day as I do (if needed) as there are about 8 hours a day when there is no almost immediate

Re: [Vo]:bit.ly/cold-fusion

One word to describe your paper. EXCELLENT. AG On 11/25/2011 10:32 AM, Bastiaan Bergman wrote: Hi group, As a physicist I feel obliged to spread the word on cold fusion and explain what it is to the general public. In that attempt I wrote the linked paper, please have a look and give me your

Re: [Vo]:Report on Rossi's visit to Boston

generation to light up a few BIG lights and leave it running for a few days. We then have a E-Cat proof system in a 20 ft container that we can demo to conservative politicians and power industry guys. The rest will be history. AG On 11/25/2011 11:05 AM, Jed Rothwell wrote: Aussie Guy E-Cat

Re: [Vo]:Report on Rossi's visit to Boston

There is no way our proposed closed loop test can be fraud. AG On 11/25/2011 11:21 AM, Alan Fletcher wrote: You mean he's changed his mind on selling you a 100KW? Instead, he'll work with and sell you a custom version of a multi-cat? (Alternative universe : you hinted that you have a yacht,

Re: [Vo]:Report on Rossi's visit to Boston

lights. AG On 11/25/2011 11:15 AM, Mary Yugo wrote: On Thu, Nov 24, 2011 at 4:43 PM, Aussie Guy E-Cat mailto:aussieguy.e...@gmail.com>> wrote: We are working with Rossi to put together a diathermic oil E-Cat system, feeding a heat engine system that will deliver Ac kWs from

Re: [Vo]:Report on Rossi's visit to Boston

WTF? I take it you did not read what our setup is to be and that you do not understand what closed loop means? AG On 11/25/2011 11:46 AM, Mary Yugo wrote: On Thu, Nov 24, 2011 at 5:06 PM, Aussie Guy E-Cat mailto:aussieguy.e...@gmail.com>> wrote: There is no way our proposed

Re: [Vo]:Report on Rossi's visit to Boston

oil to Ac kW conversion systems. AG On 11/25/2011 12:05 PM, Aussie Guy E-Cat wrote: WTF? I take it you did not read what our setup is to be and that you do not understand what closed loop means? AG On 11/25/2011 11:46 AM, Mary Yugo wrote: On Thu, Nov 24, 2011 at 5:06 PM, Aussie Guy E-Cat

Re: [Vo]:New Youtube videos from SRI features a lecture by McKubre

The Q & A session at the end is interesting. AG On 11/25/2011 1:07 PM, Terry Blanton wrote: On Thu, Nov 24, 2011 at 8:19 PM, Jouni Valkonen wrote: Quite nice lecture. Here are each video segments with direct links and titles: If you start with the first it will automatically play all 8 us

Re: [Vo]:It's Alive!

E-Cat RFGs: https://picasaweb.google.com/lh/photo/uuHG75m08zlbjA_NCNd3PyE-S4c6vKrNkv1_DikVqN4?feat=directlink AG On 11/25/2011 1:41 PM, Terry Blanton wrote: Gnorts, Vorts! McKubre says that he modulates the flow of D in and out of the Pd xtal lattice in order to achieve sustained excess heat

Re: [Vo]:It's Alive!

Thu, Nov 24, 2011 at 11:10 PM, Aussie Guy E-Cat wrote: E-Cat RFGs: https://picasaweb.google.com/lh/photo/uuHG75m08zlbjA_NCNd3PyE-S4c6vKrNkv1_DikVqN4?feat=directlink Interesting. We should have had you around when we were analyzing Santilli's Alien Autopsy film. Seriously, are you sure thes

Re: [Vo]:It's Alive!

heater wires (probably use phase / triac control of the AC waveform to control delivered power) that you do not want getting into the RFG wires). AG On 11/25/2011 3:31 PM, Terry Blanton wrote: On Thu, Nov 24, 2011 at 11:51 PM, Aussie Guy E-Cat wrote: Heater power feeds are different

Re: [Vo]:Short report on Kullander's cold fusion lecture

is quoting public 10 kW system at $0.54 / Watt with a min life of 20 years. Wonder what he quotes for 100 MWs? AG On 11/25/2011 2:59 PM, Charles Hope wrote: On Nov 23, 2011, at 23:08, Aussie Guy E-Cat wrote: Sign a contract for delivery, put your money into Escrow and do what ever Black

Re: [Vo]:It's Alive!

It is an earth wire. You can see it coiled up and not attached in some of the shots and videos. I suspect the brown and black wires are actually multi core shielded cables. Once could contain the RFG signals and the other sensor data. Rossi has claimed he has a way to deactivate individual reac

Re: [Vo]:Short report on Kullander's cold fusion lecture

Good long term business is based on good long term relationships, respect and trust. I have no intention in ripping off anybody, especially Rossi. Power utilities are very cautious and conservative guys. They understand quality, reliability and dealing with the company that did the hard yakka t

[Vo]:Official E-Cat reactor specs revealed

http://ecat.com/ecat-products/ecat-1-mw "ECAT 1 MW Plant is made up of smaller modules where the actual reactor is the size of 20 cm x 20 cm x 1 cm. These small reactors are coupled in modules of 3 pieces each, then these modules in turn are built into a 20‘ container with a series of 52 pieces

[Vo]:Andrea Rossi Working with Domenico Fioravanti on Electrical Power from E-Cat

The E-Cat keeps getting better and better. I like 450 deg C steam very much: http://www.e-catworld.com/2011/11/andrea-rossi-working-with-domenico-fioravanti-on-electrical-power-from-e-cat/ "Andrea Rossi Working with Domenico Fioravanti on Electrical Power from E-CatNovember 25, 2011 Andrea Ro

Re: [Vo]:New Youtube videos from SRI features a lecture by McKubre

Rossi has said it becomes too much Cu. I seem to recall he said the fuel was 30% Cu after 6 months and 60% Cu after 12 months. AG On 11/26/2011 2:33 AM, Alain dit le Cycliste wrote: moreover Deuterium is known to be a killing contaminant of Ni-H cells... maybe is it why the fuel have to be c

Re: [Vo]:Report on Rossi's visit to Boston

Rossi has said the 1st customer does US military research, their 1 MW E-Cat is installed in the US and they have ordered 13 more. Who they are working for is anybodies guess. To me it seems clear they were hired to test the E-Cat at a place away from Rossi (who did the install, is doing the mai

[Vo]:Official 1 MW E-Cat brochure is released

I'm please to release this document: https://docs.google.com/open?id=0B__Wi_DF2CjJNTMyZTdlYjAtYzM3OC00ZGFjLTlkMjAtOWFkYWExODI4NmQ3 AG

Re: [Vo]:Andrea Rossi Working with Domenico Fioravanti on Electrical Power from E-Cat

I appreciate your efforts. AG On 11/26/2011 6:28 AM, Patrick Ellul wrote: Just a note : it was I who picked up on his comment during the podcast and asked for further detail on jonc. On Nov 26, 2011 12:36 AM, "Aussie Guy E-Cat" <mailto:aussieguy.e...@gmail.com>> wro

Re: [Vo]:Krivit provides details of deal Celani offered Rossi and Rossi's rejection of it

Seems I have both you and Jed to talk for creating the www.lenr-canr.org web site. Yes it is a treasure trove of information and yes it did help to convince me and several others that Ni-H LENR reaction are real. Well done guys. I'm sure many other do appreciate the effort and the results. AG

Re: [Vo]:Leonardo Corporation is a Paper Company

Map here: http://www.leonardocorp1996.com/dove_eng.htm AG On 11/27/2011 12:37 PM, Craig Haynie wrote: A little digging and this comes up: 1) Karl Norwood owns a real estate company named the Norwood Group and the office property at 116 S River Rd, Bedford, NH, belongs to him. http://www.nain

Re: [Vo]:Krivit provides details of deal Celani offered Rossi and Rossi's rejection of it

Appreciate the history lesson. Good stuff. I do agree with you that F & P deserve a Noble for their work. Then they can fund Jed's work with a small part of the prize money. AG On 11/27/2011 1:16 PM, Terry Blanton wrote: On Sat, Nov 26, 2011 at 9:38 PM, Aussie Guy E-Cat wrote:

Re: [Vo]:Krivit provides details of deal Celani offered Rossi and Rossi's rejection of it

Entanglement of naked protons may be more interesting. AG On 11/27/2011 1:44 PM, Harry Veeder wrote: I don't know about you, but I come here for the naked protons. Harry On Sat, Nov 26, 2011 at 8:12 PM, Terry Blanton wrote: On Sat, Nov 26, 2011 at 7:59 PM, Mary Yugo wrote: Terry, I'm sho

[Vo]:E-Cats and 450 deg C steam

Very interesting news: http://www.journal-of-nuclear-physics.com/?p=510&cpage=35#comment-130799 Andrea Rossi: Actually, we have found a breakthrough with a primary fluid with which the reactors remain stable when we make steam at 450 Celsius. Italo A. Albanese: Did you get 450 Celsius from j

Re: [Vo]:Lattice Energy LLC comments on Rossi

Hey Jed you got a mention: "For example, someof the more publicly visible membersof this tactically cohesivecore group of cold fusioneers include, in no particular order, Dr. Edmund Storms, Prof. Peter Hagelstein, Dr. Michael McKubre, Mitchell Swartz, M.D., Prof. David Nagel, Dr. Michael Melic

Re: [Vo]:Lattice Energy LLC comments on Rossi

Nice sales pitch: http://www.ias.ac.in/pramana/v75/p617/fulltext.pdf "The analysis presented in this paper leads us to conclude that realistic possibilities exist for designing LENR devices capable of producing `green energy', that is, production of excess heat at low cost without lethal nucle

Re: [Vo]:bit.ly/cold-fusion

5 months after the 23 March 1989 P and F announcement which may have helped Piantelli to understand he was seeing a "Cold Fusion", as it was called back then, effect. I suspect Rossi's burnt finger tip happened when it touched a piece of Nickel in his bio fuel converter system that should not b

Re: [Vo]:bit.ly/cold-fusion

oups.yahoo.com/group/astrodeep/message/85 within mutual service, Rich Murray On Sun, Nov 27, 2011 at 2:02 AM, Aussie Guy E-Cat wrote: 5 months after the 23 March 1989 P and F announcement which may have helped Piantelli to understand he was seeing a "Cold Fusion", as it was calle

[Vo]:Elevated-temperature excess heat production in a Pd & D system in 1991

Found this paper referenced on the web: Journal of Electroanalytic Chemistry.JEC 319 (1991) 161-175 Elevated-temperature excess heat production in a Pd & D system, by Liaw, Tao, and Liebert. Couldn't find it in the lenr-canr archives. It does seem to be a significant peer reviewed result. Claim

Re: [Vo]:Elevated-temperature excess heat production in a Pd & D system in 1991

How in H**L was that result ignored? But then again if 300 Ktons / y of Rossi's Nickel fuel (at 2.3 tons / TWh) will reduce the amount of fossil fuel used for energy production to zero, well there could be a reason. AG On 11/28/2011 11:31 AM, Alan Fletcher wrote: It was in the 1990 paper :

Re: [Vo]:Elevated-temperature excess heat production in a Pd & D system in 1991

Ni fuel to replace all usage of fossil fuels for energy. AG On 11/28/2011 11:54 AM, Aussie Guy E-Cat wrote: How in H**L was that result ignored? But then again if 300 Ktons / y of Rossi's Nickel fuel (at 2.3 tons / TWh) will reduce the amount of fossil fuel used for energy production to

Re: [Vo]:Brian Ahern's 2011 USPTO patent application

The next 12 months will not be boring. AG On 11/28/2011 12:56 PM, pagnu...@htdconnect.com wrote: The URL: http://www.sumobrain.com/patents/wipo/Amplification-energetic-reactions/WO2011123338.html links to Brian Ahern's USPTO Application published Sept 29, 2011, entitled - "AMPLIFICATION OF ENE

Re: [Vo]:Brian Ahern's 2011 USPTO patent application

I would agree. I believe 2012 will see the start of the LENR worldwide patent wars that will rage on for years and years. Injunctions will be sought against all who are claimed to be patent violators. The LENR business worldwide just might grind to a halt under the weight of the patent wars and

Re: [Vo]:Elevated-temperature excess heat production in a Pd & D system in 1991

ny problem with supplying the basic fuel (Ni and H). Of course, the price of Ni is going to see a pretty drastic increase, so Rossi's estimates of costs are probably not realistic except for the very short term. -mark -Original Message----- From: Aussie Guy E-Cat [mailto:aussieguy.e...@

Re: [Vo]:Brian Ahern's 2011 USPTO patent application

I hope you get it working too. All the best mate. AG On 11/28/2011 3:17 PM, fznidar...@aol.com wrote: Of all of this patent goings on, no one has applied for a patent to produce electrical power directly from a LENR reaction. The don't know enough. They are just making thermal energy to spin

[Vo]:Larsen, LENR in Lithium batteries and burn out IPhone

Just after I read that Larsen thinks LENR reactions can occur inside Lithium Ion batteries I read this: http://www.rex.com.au/MediaRelease/Files/295_MR2025%20-%20Mobile%20Phone%20Self%20Combustion.pdf Battery was reported as glowing Red hot. AG

Re: [Vo]:Larsen, LENR in Lithium batteries and burn out IPhone

More photos of the phone: http://www.australianfrequentflyer.com.au/community/travel-news/iphone-self-combusts-regional-express-34736.html#post522180 Sure made a mess of the phone. Maybe send the phone to Larsen to look for transmutation products? AG On 11/28/2011 8:15 PM, Aussie Guy E-Cat

<    1   2   3   4   5   6   >