Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

It looks as though weewx found your wmr300 this time. The index.html will not be created until the first archive interval - so how long it takes to appear depends on what archive interval you set in weewx.conf Just leave it running, and monitor the log using the command tail -f /var/log/syslog

Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

Sorry I nag so much on you. But I am a little distressed over not get it to work. I ran your commands and this is what came in the log But I can still do not these files file: ///var/www/html/weewx/index.html Feb 21 07:38:53 raspberrypi kernel: [ 88.499789] usb 1-1.4: reset full-speed USB

Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

Hello again 1 I we get this to work :-) I used this guide but weather was not in RPI I've put it in reach but it helps nothing. Configure apt Tell apt where to find the weewx releases. This only has to be done once - the first time you install. curl -s http://weewx.com/keys.html | sudo apt-key

Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

or to run directly, not as a daemon, try sudo weewxd /etc/weewx/weewx.conf On Tuesday, 21 February 2017 08:54:41 UTC+2, Andrew Milner wrote: > 1. what were you trying to do with the command which you posted? > 2. how did you install weewx? If you used the deb install then try the >

[weewx-user] KlimaLogg Pro with sensors 30.3180.IT: batteryStatus

I'm evaluating weewx on a Raspberry Pi 3. I've been waiting years for a solution to read the KlimaLogg sensor data without Windows software, and I'm very happy that it's possible with weewx and the weewx-klimalogg driver. I own a KlimaLogg Pro device and 8 thermo/hygro sensors. The

Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

1. what were you trying to do with the command which you posted? 2. how did you install weewx? If you used the deb install then try the commands: sudo /etc/init.d/weewx start and sudo /etc/init.d/weewx stop to stop and start the weewx daemon - if you were trying to start weewx. On

Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

I have it connected to now I had not when I installed into WEEWX program. Do I delete weewx program to get it or is there something else that can fix it 2017-02-21 7:46 GMT+01:00 Andrew Milner : > Have you connected the weather station to the Pi?? The log is saying

Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

Have you connected the weather station to the Pi?? The log is saying that weewx cannot find the weather station plugged into the USB. If you want to run weewx without a weather station connected to the RPi you must select 'simulator' as the station type. If you select a station type of WMR300

Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

Feb 20 20:35:16 raspberrypi dhcpcd[436]: wlan0: fe80::222:7ff:fe4a:ebca router available Feb 20 20:35:16 raspberrypi dhcpcd[436]: wlan0: fe80::222:7ff:fe4a:ebca router available Feb 20 20:35:21 raspberrypi dhcpcd[436]: wlan0: fe80::222:7ff:fe4a:ebca router available Feb 20 20:35:24 raspberrypi

Re: [weewx-user] Re: attaching a raspberry Pi weather station to the weewx system - using wxMesh driver

i found it helpful to configure the broker so that it publishes using websockets. then you can use a web browser to see what is happening. this is especially useful when you're trying to decode someone else's topic hierarchy, or to figure out why your own topics are not showing up where you

[weewx-user] Re: attaching a raspberry Pi weather station to the weewx system - using wxMesh driver

That "Socket error" may be an MQTT protocol version mismatch. Try changing the version which is hardcoded in my driver import paho.mqtt.client as mqtt self.client = mqtt.Client(client_id=self.client_id, protocol=mqtt.MQTTv31) to match what your library and MQTT broke Mosquitto support. You

Re: [weewx-user] Re: attaching a raspberry Pi weather station to the weewx system - using wxMesh driver

OK, so no issues with MQTT. I originally was not using the username/password facility in Mosquitto. You could try that, and simply comment out the lines in the driver. I think this is the setting in mosquitto.conf allow_anonymous true Thank you for trying the driver. When we find out why

Re: [weewx-user] Re: attaching a raspberry Pi weather station to the weewx system - using wxMesh driver

Oh, make sure you connect as a different client if you use that monitoring script. Otherwise it will take all the traffic from weewx! On Mon, Feb 20, 2017 at 6:44 PM, Bill Morrow wrote: > Frederic, these two lines you have highlighted > self.username =

Re: [weewx-user] Re: attaching a raspberry Pi weather station to the weewx system - using wxMesh driver

Frederic, these two lines you have highlighted self.username = stn_dict.get('username', 'XXX') self.password = stn_dict.get('password', 'password') should pick up the username and password from the python "dictionary " that is

Re: [weewx-user] Re: Steel Series Gauges and RealTime update - 2.5 second interval - how?

Dropped the new file in place, stop/start weewx and it looks good to me Gary. Online in the usual place if anyone is interested... http://www.nthead.co.uk/ss/index.html Nigel. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from

[weewx-user] Re: Realtime Gauge-Data Extension 0.2.2 'gauge-data.txt' Issues

Why do I want rapidly changing gauge data? a) Because I can. b) So I can sit with my ipad in my lounge and watch the dials move during gusty/stormy conditions and not have to stand at my console to see the same. c) When I am away from home, I can watch them from afar. Not worried whether anyone

[weewx-user] Re: Realtime Gauge-Data Extension 0.2.2 'gauge-data.txt' Issues

Sorry, I neglected to provide this link to the development site in the post above. http://www.lablibrary.com/ss/ Bob On Monday, February 20, 2017 at 2:09:20 PM UTC-8, tempus wrote: > > The gauges show both average and gust data, neither of which are 'fake > weather.' Peak gusts are important

[weewx-user] Re: Realtime Gauge-Data Extension 0.2.2 'gauge-data.txt' Issues

The gauges show both average and gust data, neither of which are 'fake weather.' Peak gusts are important to aircraft pilots and mariners. They also are important to analyzing and predicting changing weather conditions. Wind speeds and directions averaged over various past time intervals,

[weewx-user] Re: attaching a raspberry Pi weather station to the weewx system - using wxMesh driver

and I forget to say I use "mqtt dashboard" android app to send the following text with weather topic: TIME:0,AMBT: 7.23,BARP:1001.97,RHUM:70.92,HUMT: 4.44,IRRA:12,BATV:974,PHOV:673,SYST:33.20,WIND: 0.0,WDIR: 0.0 I publish the text manually by clicking on "publish" button of the app. The text

[weewx-user] Re: attaching a raspberry Pi weather station to the weewx system - using wxMesh driver

> > for information: syslog, I have only this every 1s (my poll interval) > Feb 20 21:31:59 localhost weewx[9448]: wxMesh: Sleeping for 1 Feb 20 21:32:00 localhost weewx[9448]: wxMesh: Working on payload : Empty Feb 20 21:32:00 localhost weewx[9448]: wxMesh: Sleeping for 1 Feb 20 21:32:01

[weewx-user] Re: attaching a raspberry Pi weather station to the weewx system - using wxMesh driver

Bill, I have some troubles to make the driver work. While look at the code, I have the feeling that the username / password from weewx.conf are not used ? I tried something, but seems not working better. here is my test (it's based on other lines of the driver, I try to do something similar,

[weewx-user] Re: Realtime Gauge-Data Extension 0.2.2 'gauge-data.txt' Issues

@ tempus: 1. Windspeeds do indeed change rapidly, which is why there is usually a 10 minute averaging period to cover reported wind speeds. Measuring gusts and wind intensity Because wind is an element that varies rapidly over very short periods of time it is sampled at high frequency

[weewx-user] Re: Realtime Gauge-Data Extension 0.2.2 'gauge-data.txt' Issues

On Monday, February 20, 2017 at 9:33:27 AM UTC-8, tempus wrote: > > This is merely a suggestion for consideration. > 173 bytes doesn't seem like much. However, with 3-second updates there > will 86400 / 3 = 28,800 file transmissions per day to each concurrent > user. 28,800 x 173 bytes =

[weewx-user] Realtime Gauge-Data Extension 0.2.4 'gauge-data.txt' Issues

'gauge-data.txt' contains *cloudbaseunit": "m"*. In the U.S. the Cloud Base unit-of-measure should be foot. Bob -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[weewx-user] Re: Realtime Gauge-Data Extension 0.2.2 'gauge-data.txt' Issues

1) Wind speed and direction data tends to change radically from second-to-second and is interesting to watch, especially in coastal areas where high wind speeds often cause significant property damage and even loss of life. 2) Rapidly changing gauges quickly demonstrate to website visitors

Re: [weewx-user] Re: Cant find file:///var/www/html/weewx/index.html

Hi I am completely new to this. I did not find the log file either. Have restarted the new NOOBS now. Going to try and install once more before I enter the following description. 2017-02-18 21:10 GMT+01:00 mwall : > > > On Saturday, February 18, 2017 at 2:50:35 PM

[weewx-user] Re: Realtime Gauge-Data Extension 0.2.2 'gauge-data.txt' Issues

I would prefer to ask the questions - why am I providing 3 second updates? What practical value do 3 second updates have for most users?? What is the point?? On Monday, 20 February 2017 19:33:27 UTC+2, tempus wrote: > This is merely a suggestion for consideration. > > Space characters are

[weewx-user] Re: Realtime Gauge-Data Extension 0.2.2 'gauge-data.txt' Issues

This is merely a suggestion for consideration. Space characters are commonly used within and between key-value pairs in associative arrays to improve human readability. Because 'gauge-data.txt' human-readability isn't important, the file could be reduced in size 158 bytes, plus another 15

[weewx-user] Re: attaching a raspberry Pi weather station to the weewx system - using wxMesh driver

On Monday, 20 February 2017 13:04:47 UTC-4, wysiwyg wrote: > > Many thanks for so quick answer and wiki link. I will read this page > carefully ! > > One more question: > Would it make sense to use topic instead of all data in one topic ? > I mean > weather/outside/temperature = 21 >

Re: [weewx-user] Re: attaching a raspberry Pi weather station to the weewx system - using wxMesh driver

I've removed my user/password information from the github document. Thank you for alerting me to the goof, Frederic. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email

[weewx-user] Re: attaching a raspberry Pi weather station to the weewx system - using wxMesh driver

Many thanks for so quick answer and wiki link. I will read this page carefully ! One more question: Would it make sense to use topic instead of all data in one topic ? I mean weather/outside/temperature = 21 weather/outside/humiduty = 77 weather/inside/temperature = 21 This is just an

[weewx-user] Re: attaching a raspberry Pi weather station to the weewx system

Hello Bill, I'm just discovering your work (and I'm also discovering mqtt, and ESP8266) I feel like a new world of expending weewx is opening to me :-D I plan to replace little by little my Oregon station by an homemade one. So yesterday I setup a mosquitto server on an orange pi (an kind

Re: [weewx-user] Re: Steel Series Gauges and RealTime update - 2.5 second interval - how?

Unfortunately the issue will remain whilst the gauge-data.txt values are formatted to the likes of 1 decimal place. This issue also exists with other PWS software that produce a similarly formatted data file for use by the SteelSeries Weather Gauges. Changing the underlying units to the units

Re: [weewx-user] Re: Steel Series Gauges and RealTime update - 2.5 second interval - how?

Option 3 was implemented in v0.2.3. No need to do anything with appTemp, rtgd taes care of it. Gary On Monday, 20 February 2017 06:05:34 UTC+10, tempus wrote: > > Your Option 3 below seems best to me. Where is the best place to set > apptempL and apptempH both to the current appTemp value? >

Re: [weewx-user] Digest for weewx-user@googlegroups.com - 5 updates in 4 topics

I'm now sending my data to Wunderground and using this program on my iPhone and iPad... Very nice way to display data from weewx... http://pwsmonitor.blogspot.com/ http://www.wunderground.com/weatherstation/about.asp ~~ _/) _/) _/) _/) ~~ Tom Lafleur > On Feb 20, 2017, at 3:52

[weewx-user] Re: Realtime Gauge-Data Extension 0.2.2 'gauge-data.txt' Issues

Typo was the cause of the rain issue, as for the pressure issue, seems I changed the structure of config options for formatting but neglected to change the code. Should be fixed now in v0.2.4. Note that the digital display on the pressure gauge will display 2 decimal places when using inHg,

[weewx-user] Re: Wind direction and wind vector stuck in easterly direction

Finally we are back in on-line with with correct wind measurements again. It might be interesting for you to know that the issue was hardware related describes as "I think 180 degrees is where the potentiometer transitions from a high resistance to a low resistance. It sounds at though there

Re: [weewx-user] Wrong data archived after reboot

Jeff: I know this is a couple years old but did you ever find out how to suppress the bad data? I have a similar setup and resorted to just putting in a UPS but that does not help when you do have to stop the process. Get zero on the temperature on boot up which messes up the data. Any