Yes! So far so good!
- pjd
From: weewx-user@googlegroups.com On Behalf Of
John Kline
Sent: Monday, March 22, 2021 10:57 PM
To: weewx-user@googlegroups.com
Subject: Re: [weewx-user] Not uploading to CWOP - still not working
It looks like every 5 minutes to me, no?
It looks like every 5 minutes to me, no?
http://www.findu.com/cgi-bin/raw.cgi?call=W2IRT
> On Mar 22, 2021, at 7:03 PM, Peter Dougherty wrote:
>
>
> Sorry to be so daft, but I honestly could not understand this. I’m a
> “set-it-and-forget-it” user so I’m not up on all the terminology, I’m
Sorry to be so daft, but I honestly could not understand this. I’m a
“set-it-and-forget-it” user so I’m not up on all the terminology, I’m afraid. I
last did anything of consequence to this RPi in 2019, and it was built by a
Linux-competent friend in 2017.
I did tell the weewx config file to
It should have put the data right in your database. You should be able to
tell by looking at the image plots.
Mind you: they are refreshed only as often as the aggregation interval. If
you want to see them right away, delete them and they will be automatically
regenerated in the next reporting
I did use the - - dump command. But (a) I don’t know where it put the data,
(b) how to recover it, or (c) does it need to even be recovered now?
- pjd
From: weewx-user@googlegroups.com On Behalf Of
Tom Keffer
Sent: Monday, March 22, 2021 9:30 PM
To: weewx-user
Subject: Re:
OMG, that is a book. 50 pages of stream-of-consciousness, leading into a
fabulous tale.
> On 22 Mar, 2021, at 20:20, Les Niles wrote:
>
> Now that’s a name I've not heard in a long time. I remember the story well,
> but had forgotten the title. Thanks for the pointer!
>
> The other one
A favorite of mine is *In the Wide Land*, by A. R. Ammons:
Having split up the chaparral
blasting my sight
the wind said
You know I'm
the result of
forces beyond my control
I don't hold it against you
I said
It's all right I understand
Those pressure bowls and cones
the wind said
are
Being in the Blue Mountains, Oz. My thoughts drifted towards Dorothy
MacKellar, My Country;
".
Of rugged mountain ranges
Of droughts and flooding rain
"
Duncan
On Tuesday, March 23, 2021 at 11:20:57 AM UTC+11 ln77 wrote:
> Now that’s a name I've not heard in a long time. I remember the
Now that’s a name I've not heard in a long time. I remember the story well,
but had forgotten the title. Thanks for the pointer!
The other one that comes to mind in these kinds of conditions is “Sometimes a
Great Notion.” A much longer read, but well worth it.
-Les
> On 22 Mar 2021, at
So…a tiny bit of progress (maybe??)
I stopped the Vantage console for a few minutes and pulled out the batteries.
Restarted it, then unplugged the RPi and reconnected it. It seems to have
started adding the missing data and I’m seeing “restx” messages again, but
after 10 minutes, nothing seems
First I've heard of it, and you're right: a great short read. Thanks for
the tip!
On Mon, Mar 22, 2021 at 4:16 PM D R wrote:
> I'm reminded of Ray Bradbury's wonderful and chilling short story, "All
> Summer in a Day."
>
> Free online and a quick read. I still get shivers when I think of it.
>
I'm reminded of Ray Bradbury's wonderful and chilling short story, "All
Summer in a Day."
Free online and a quick read. I still get shivers when I think of it.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and
I will de-power the Vantage for 5 minutes and see what happens, and reboot the
Raspberry Pi once the Vantage console is back on line.
- pjd
From: weewx-user@googlegroups.com On Behalf Of
Tom Keffer
Sent: Monday, March 22, 2021 7:08 PM
To: weewx-user
Subject: Re: [weewx-user] Not
As suspected (and as I guessed in your original thread), you are using
RapidFire. It uses LOOP packets, and so will be unaffected by a corrupt
logger.
Again, as noted in the other thread, clear the logger
You definitely have a corrupted logger. The clue are the lines
Mar 22 18:10:17 wx weewx[2460]: vantage: Retrieving 513 page(s); starting
index= 1
Mar 22 18:10:17 wx weewx[2460]: vantage: DMPAFT complete: page timestamp
2021-03-13 19:50:00 EST (1615683000) less than final timestamp 2021-03-14
OK, now that is bizarre. Why would it just suddenly disappear, I wonder? I will
post over there but there’s gotta be more involved.
The end goal is to have the data not just posted to CWOP itself, but also
disseminated to the APRS network.
- pjd
From: weewx-user@googlegroups.com On
Well, I am seeing the data coming in here (W2IRT == E0732):
https://weather.gladstonefamily.net/site/E0732
> On Mar 22, 2021, at 4:00 PM, John Kline wrote:
>
>
> I don’t see W2IRT listed here:
> http://www.wxqa.com/members.txt
>
> I’m not sure; but perhaps it is no longer registered? A
I don’t see W2IRT listed here:
http://www.wxqa.com/members.txt
I’m not sure; but perhaps it is no longer registered? A better place to ask
that question (is it registered), is here:
https://www.wxforum.net/index.php?board=15.0
> On Mar 22, 2021, at 3:38 PM, Peter Dougherty wrote:
>
> It
It occurred to me that you might also need to see the log from process
start, so I stopped the service and restarted it, and have pasted the
relevant portion of the log below. This is from within 3 minutes of my
typing out this post.
Mar 22 18:34:16 wx weewx[2460]: engine: Received signal
For forecast in WeeWX 4.x, you should have better luck installing:
https://github.com/chaunceygardiner/weewx-forecast
> On Mar 22, 2021, at 1:18 PM, craig@gmail.com
> wrote:
>
>
> I have two problems that I may have caused myself (noob). I have had weewx
> running fine on my raspberry
OK, set to debug and the results will be found below.
My Weather Underground page is
https://www.wunderground.com/dashboard/pws/KNJWESTC2
And as you can see, data has been continuous for quite some time. I had stopped
and restarted the server a few times in an attempt to maybe get things running
Maybe you should change it to tell you when it was last *not* raining!
On Mon, Mar 22, 2021 at 2:49 PM Greg from Oz wrote:
> Have installed the time-since and it works well thanks.
> It is flooding here in Australia so I have to wait until the rain stops to
> really test it as it always says
Have installed the time-since and it works well thanks.
It is flooding here in Australia so I have to wait until the rain stops to
really test it as it always says
Last rain was:
23/03/21 08:40:00
0 days, 0 hours, 0 minutes ago
https://weather.ubeaut.work/
Thanks again.
On Monday, 22 March
I have two problems that I may have caused myself (noob). I have had weewx
running fine on my raspberry pi for several years. After updating weewx to
V 4.4 and changing the forecast extension from NWS to Aeris for forecast
both problems showed up. My station type is SDR.
First problem:
Years
Maybe on the new router the system is running in some kind of sandbox,
where the USB-Devices are not passed through?
tel...@gmail.com schrieb am Sonntag, 21. März 2021 um 19:33:49 UTC+1:
> Hi
>
> I have weather station WH2080 and have been using it for few years.
> Station is connected to wifi
Congrats! Glad to hear.
You have a New issue. I suggest opening a new thread with a good title so
that more people can notice and help out.
On Sun, Mar 21, 2021 at 10:48 AM Auchtermuchty Weather
wrote:
> Fantastic, got it working on the test system. Now I'm using it all is
> clear - that the
You said the station is uploading to the WU, but I'm not seeing any
evidence of that in the log. Of course, you do not have debug set, so we
can't really tell one way or the other.
Also, there was a big jump in time in the logfrom 12:17:17 to 12:28:38,
which makes me suspicious that you may have
Hi all,
About 8 days ago weewx stopped uploading data to CWOP without explanation.
It has continued to report to Weather Underground without issue so the
station itself, the Pi, weewx, and the Internet connection are obviously
still good.
I'm not sure what went wrong. I didn't change any files
Nice! Thanks, it's working now.
On Monday, March 22, 2021 at 5:01:21 PM UTC+1 michael.k...@gmx.at wrote:
> You probably need to install the python module(s):
> https://github.com/matthewwall/weewx-mqtt/blob/master/readme.txt =>
> section " Pre-Requisites"
>
> bjorn@gmail.com schrieb am
The value for pressure is now additionally displayed on the left under
"current conditions".
But how can I change the plot from barometer (sea level) to pressure
(station level)?
Am 22.03.2021 um 14:27 schrieb Pline Pa:
After I started with weewx, I switched from the simulator to
Ist keinesfalls ein Schaden! Danke!
tke...@gmail.com schrieb am Sonntag, 21. März 2021 um 13:38:40 UTC+1:
> Good idea! Perhaps you could put a link on the Wiki?
>
>
> On Sun, Mar 21, 2021 at 5:21 AM Karen K wrote:
>
>> I sometimes meet people that did not learn English that much and search
>>
You probably need to install the python
module(s): https://github.com/matthewwall/weewx-mqtt/blob/master/readme.txt
=> section " Pre-Requisites"
bjorn@gmail.com schrieb am Montag, 22. März 2021 um 16:25:47 UTC+1:
> I had a CHIP-machine running Weewx sending data to a MQTT-broker on a
>
I had a CHIP-machine running Weewx sending data to a MQTT-broker on a
separate server. The CHIP went down, and I had to reinstall weewx on a RPI
Zero. I copied the old weewx.conf I had on the CHIP, and now weewx reports
that there is no mqtt module.
Traceback (most recent call last):
File
After I started with weewx, I switched from the simulator to fileparse.
I use fileparse to read in the readings of my old ELV-weatherstation.
Via fileparse i read the station pressure.
In the standard skin i see the sea level (barometer) as declared under:
Yes, after the fire disaster, this deluge is followed in world news. You
do not live in a quiet location!
I am well in Belgium
Le 22-03-21 à 00:29, Dun Mac a écrit :
Although Ozstrayla may have to wait until it can be utilised. Rain in
the last 7 days has been 456.2mm (18")
--
You received
35 matches
Mail list logo
