Re: [weewx-user] Wunderground uploads using wunderfixer

ing of up to 4 hours. > > On Thu, Mar 21, 2024 at 7:42 PM 'Andy Peterman' via weewx-user < > weewx...@googlegroups.com> wrote: > >> Strange, I'm still running 4.10.2 and just used wunderfixer >> successfully. Our Internet was down for about 3 hours, I ran wunderfixer

Re: [weewx-user] Wunderground uploads using wunderfixer

Strange, I'm still running 4.10.2 and just used wunderfixer successfully. Our Internet was down for about 3 hours, I ran wunderfixer, and it filled in the entire period. Also, last weekend weewx hung right after the time change (not sure why, but that's another problem) and when I got it

[weewx-user] Re: Your hardware experience (for running WeeWX, the service)

, 0.30 ## This one boots off of a USB SSD, for what ever reason locks up Andy On Friday, February 23, 2024 at 4:18:20 AM UTC-8 jterr...@gmail.com wrote: > I installed my Weewx in 2019 on a Raspberry Pi 3B+, fitted with an mSATA > extension card (such as this one : > https://geekworm.com

[weewx-user] Re: connect to sdr and te923?

You could run two instances of weewx, one with the sdr driver and one with the te923 driver. On Saturday, November 11, 2023 at 12:16:26 PM UTC-8 Jan Sennesael wrote: > I'm new to weewx, but i would like to use my te923

Re: [weewx-user] Re: Trouble installing Belchertown skin:

If your clients are local, why not just run the MQTT broker on the same machine as WEEWX? Not hard to do. Andy On Wednesday, July 19, 2023 at 8:41:01 AM UTC-7 n8a...@gmail.com wrote: > Very good- Thank you. > > May I also ask: Do you think I can get the MQTT feature to work for m

Re: [weewx-user] Hung up on saving my config file

I am using the Terminal window. On Monday, March 27, 2023 at 3:44:24 PM UTC-5 gjr80 wrote: > Andy, > > Try posting your reply again, your two replies were marked as spam/junk > and when I released them they were deleted. I'll try a different approach > if your next reply is s

Re: [weewx-user] Hung up on saving my config file

I am using the Terminal to edit. On Monday, March 27, 2023 at 2:00:38 PM UTC-5 p q wrote: > depends on the editor you're using? > > On Mon, Mar 27, 2023 at 11:49 AM 'Andy Thompson' via weewx-user < > weewx...@googlegroups.com> wrote: > >> I had to make some changes to

[weewx-user] Hung up on saving my config file

I had to make some changes to my config file today and I wondering how you save the changes before exiting? -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[weewx-user] Re: Unmapped sensor

Neighbor has a FOWH32B with sensor ID 91 or rtl_433 decoded improperly? Andy On Thursday, October 6, 2022 at 7:38:43 AM UTC-7 mfr...@gmail.com wrote: > For some reason I had 3 messages last night that were unmapped readings: > > Oct 5 23:51:18 weather-new weewx[405] INFO user.sdr:

Re: [weewx-user] Re: Weewx and Acurite Access setup instructions

mode = sniff iface = eth1 pcap_filter = src X.X.X.X and dst port 80 Andy On Tuesday, September 6, 2022 at 9:08:53 AM UTC-7 meteo219 wrote: > So adding the sensor_map didn't help. I am not seeing any data using the > interceptor.py looking at that Access. The Access and my Fed

[weewx-user] Re: WH51 soil moisture

Change the battery line just below IDENTIFIER = "Fineoffset-WH51" in the bin/user/sdr.py driver to: pkt['battery'] = 0 if obj.get('battery_ok') == 1 else 1 On Monday, July 4, 2022 at 4:19:02 AM UTC-7 mfr...@gmail.com wrote: > It is also reporting battery low even though >

Re: [weewx-user] weewx sql database repair tools

to higher capacity CyberPower units with a bit better monitoring and logging but still not a lot of of tech dails in that even to satisfy my Retire Eng Etech background.  On 2022-06-27 16:55, Doug Jenkins wrote: Andy: I use dbeaver (dbeaver.io <http://dbeaver.io>) to manage all my dat

Re: [weewx-user] weewx sql database repair tools

miss something? Could you be more specific about what's wrong with the database? On Mon, Jun 27, 2022 at 2:32 PM VE4PER Andy wrote: I had a major commercial power failure about 10 days ago. In the process it ran the UPS down almost completely such that when the last few power

[weewx-user] weewx sql database repair tools

backup support runs out. Any pointers are welcome, considering so many outside agancies use the data (eg AWEKAS, CWOP/NOAA/aprs/ WeatherUnderground in addition to my on local and www page. Thanks 73 Andy -- You received this message because you are subscribed to the Google Groups "

[weewx-user] Re: weewx-sdr TFA pluviometer not parsed .

gt; <http://192.168.1.5/weewx/>*out: ['{"time" : "2022-06-19 09:18:57", > "model" : "TFA-Drop", "id" : 549565, "battery_ok" : 1, "rain_mm" : 0.000, > "mic" : "CHECKSUM"}\n']* > > How is-it p

Re: [weewx-user] Re: Adding lightening sensor to weewx

165700 28.01.0 1652220600 15.02.0 Andy On Wednesday, June 8, 2022 at 5:49:17 PM UTC-7 dave.sp...@gmail.com wrote: > Thanks for all the info you provided below, but I am still stumped. I only > have one the Acurite Atlas with l

[weewx-user] Re: Weewx-sdr Oregon THR228N sensor not parsed .

you are welcome! https://github.com/matthewwall/weewx-sdr/pull/150/commits/9c86098e19f237e43a27f77c93b16565afe1f4f3 Andy On Tuesday, June 7, 2022 at 7:11:55 AM UTC-7 modu...@gmail.com wrote: > Hello Andy , thank you for you nice help ! > Now it works wit your file sdr.py !! > b

[weewx-user] Re: Bresser 6in1 with WeeWx possible?

The SDR dongle would be attached to your virtual server (usb passthrough) and collect the data from your weather station. Then WeeWx would process the data. Or give the interceptor driver a try. There is a bit of complexity with the interceptor. Andy On Monday, May 16, 2022 at 1:35:21 AM UTC-7

Re: [weewx-user] Setup Forecast in BelcherTown Skin

[Belchertown]] skin = Belchertown HTML_ROOT = public_html/belchertown [[[Extras]]] forecast_enabled = 1 forecast_api_id = x forecast_api_secret = x Andy On Thursday, May 12, 2022 at 7:32:06 PM UTC-7 jo...@johnkline.com w

[weewx-user] Re: Bresser 6in1 with WeeWx possible?

I would get the SDR dongle and a WH-25 for pressure. Read this. Or here is some talk about the driver. https://groups.google.com/g/weewx-development/c/Md9kPHFe5X0 On

Re: [weewx-user] Re: Excessive Syslog data

, April 29, 2022 at 2:59:33 PM UTC-7 tke...@gmail.com wrote: > Andy, you didn't say, but I'll bet you're trying to run weewxd as a > daemon. If that's the case, you need to use the --daemon flag. > > Among other things, the --daemon flag causes weewxd to reassign standard > outp

[weewx-user] Re: Excessive Syslog data

(docker ? setup.py ? dpkg ? rpm ?) > > Does https://groups.google.com/g/weewx-user/c/_4OJtLsI7_w/m/yuC9Zry2BQAJ > help any ? > > On Friday, April 29, 2022 at 9:50:14 AM UTC-7 Andy Peterman wrote: > >> I've recently updated to 4.7.0 and just noticed the system log (syslog) >&g

[weewx-user] Excessive Syslog data

I've recently updated to 4.7.0 and just noticed the system log (syslog) has been getting dumps of loop data every few seconds. Here's what I've been seeing: Apr 29 09:46:35 Multipass com.weewx.weewxd[2617]: LOOP: 2022-04-29 09:46:14 PDT (1651250774) 'altimeter': '30.112925788902526',

[weewx-user] Re: Understanding Rain values (including SDR deltas)

The delta is already set in the sdr.py driver at line 3254. Try removing the delta stanza from your config and restarting. Look at the comments at the start of the sdr.py driver for info on delta. Andy On Monday, April 18, 2022 at 12:48:30 AM UTC-7 call...@gmail.com wrote: > Hello; firs

Re: [weewx-user] Re: Weatherflow UDP driver, Tempest battery reports 'LOW'

i just wanted to say Thank You 'jhn.p...@gmail.com' for starting this thread and vince for getting it rolling. I'm an aged 50+ closet nerd with great google skills and who learned B.A.S.I.C on an Atari... Here's what they said in the above messages in a way that worked for me. Maybe next

[weewx-user] #interaction between different mfrs display units and wx stns query

I am running an ACURite 1035 local wx stn. and comms between sensor on mast and indoor display unit is in 430 MHz band area. I recently bought a Taylor remote indoor/outdoor temp monitor unit with outdoor temp sensor and indoor display unit; testing the remote sensor showed it did not work.

Re: [weewx-user] Re: Slow Response Time

>From the screenshot of your router config you have tcp/80, udp/80 open and tcp/8245 open from the outside. Get rid of udp/80 and tcp/8245, not needed. The no-ip docs. *For update requests on HTTP, our interface listens on Ports 80 and 8245. Port 8245

Re: [weewx-user] Re: Slow Response Time

I don't think tcp/8245 inbound should be open. The no-ip updates are outbound so you do not need to open a port in. Change your port 80 forward to tcp only, udp 80 is not needed. Andy On Wednesday, December 15, 2021 at 3:47:32 AM UTC-8 kk44...@gmail.com wrote: > May be you want to

[weewx-user] Re: Slow Response Time

300-400 ms for me. Loads fine. NAT loopback from inside your network related to slowness? Andy On Monday, December 13, 2021 at 11:02:07 PM UTC-8 jonatha...@gmail.com wrote: > I have a weather station that's visible on the web as > http://oaklandweather.ddns.net/weewx/index.html . Re

[weewx-user] Re: Slow Response Time

Your page loads fast for me, around 400-500 ms. The slowness from inside your home network may be related to NAT loopback. Turn off wifi on your phone and see how your page loads. Andy On Monday, December 13, 2021 at 11:02:07 PM UTC-8 jonatha...@gmail.com wrote: > I have a weat

[weewx-user] Re: Slow Response Time

Loads quickly for me, 300-400 ms. Probably related to NAT loopback in your home router. Try your page from a smartphone with wifi turned off. Andy On Monday, December 13, 2021 at 11:02:07 PM UTC-8 jonatha...@gmail.com wrote: > I have a weather station that's visible on the web as >

[weewx-user] Can't reply to posting

Trying to reply to "Slow Response Time" post and my replies show deleted. Andy -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[weewx-user] Re: La Crosse 5-in-1 professional wireless weather station

works. Thanks John. Andy On Friday, December 3, 2021 at 1:44:20 AM UTC-8 jhn.p...@gmail.com wrote: > I ran LaCrosse Costco grade krappe for years. Believe me, its not worth > the bother, its horribly inaccurate, its highly subject to UV plastic rot > such that the weather inst

Re: [weewx-user] Upgrade - how to determine the original install method

Also you can look at installed packages. apt search weewx or apt list --installed | grep weewx rpm -qa | grep weewx On Thursday, October 28, 2021 at 9:17:20 AM UTC-7 Wiggytoo wrote: > Many thanks, it's in etc/weewx. > > Gavin > > On Thu, 28 Oct 2021, 15:33 Wiggytoo, wrote: > >> Hi - I am

[weewx-user] Re: weewx-multi not working

file is missing from /etc/init.d or is not executable? ls -l /etc/init.d | grep weewx On Tuesday, September 21, 2021 at 6:18:25 AM UTC-7 lang@googlemail.com wrote: > Hi > > I did the installation on my RPi exactly as described at > https://github.com/weewx/weewx/wiki/weewx-multi > > -

Re: [weewx-user] StdTimeSynch

$1.99 real time clock. On Monday, September 20, 2021 at 9:16:38 AM UTC-7 tke...@gmail.com wrote: > We really need to see the log. > > Also, see the note about "fake clock >

Re: [weewx-user] Re: Acurite Atlas with Access -- Weewx on VM

r Acurite traffic like if you are doing this: Acurite Access <---> Home Network/Internet <---> Debian VM Andy On Friday, September 10, 2021 at 5:06:53 PM UTC-7 subl...@gmail.com wrote: > Andy, > > sorry for the delay , > > here is the config i use > > [Interce

[weewx-user] Re: Gnome Shell

https://github.com/weewx/weewx/wiki/openweathermap Send your weewx data to OpenWeather and use the existing applet? Andy On Sunday, September 5, 2021 at 3:53:09 PM UTC-7 Clifford Snow wrote: > I'm new to the community and still struggling to figure out how to > configure weewx but

[weewx-user] Re: Acurite Atlas with Access -- Weewx on VM

Access connected to one interface? Need more info on your setup. Andy On Wednesday, September 8, 2021 at 6:19:34 AM UTC-7 subl...@gmail.com wrote: > OK so i have found some info in the group but not specific -- so here is > the issue > > cannot get data > > here is the setu

Fwd: [weewx-user] Fog detection?

per request Forwarded Message Subject:Re: [weewx-user] Fog detection? Date: Tue, 31 Aug 2021 15:26:46 -0500 From: VE4PER / Andy To: Greg Troxel I think the sensor is referred to as transmissometer; usually in pro unattended observer stations that is used

Re: [weewx-user] Compatibiliy of WS980 WIFI weather station [2]

looks like rtl_433 <https://github.com/merbanan/rtl_433> supports a few ELV models. You would need a cheap dongle and WeeWX SDR Driver. Andy On Wednesday, July 28, 2021 at 5:30:56 AM UTC-7 webm...@luftfahrtverein-gruenstadt.de wrote: > Wow, what a user group! > Thank you so much,

[weewx-user] Re: Attempting to integrate Acurite 6045M, rtl_433 does not show parsed data, cannot figure out entry for sensor map

2, 'battery.3C47.AcuriteLightningPacket': 0, 'humidity.3C47.AcuriteLightningPacket': 78, 'active.3C47.AcuriteLightningPacket': 0, 'rfi.3C47.AcuriteLightningPacket': 1, 'exception.3C47.AcuriteLightningPacket': 0, 'strikes_total.3C47.AcuriteLightningPacket': 174, 'distance.3C47.AcuriteLightningPacke

[weewx-user] Re: weewx Treiber and SDR driver simultan ?

You can only use one driver. The WS3080 works with SDR driver. Andy On Monday, January 11, 2021 at 10:09:02 AM UTC-8 Frank wrote: > Hi there I'm currently working with rtl_433 ... Can my WS3080 weather > station run via fousb and at the same time my USB STICK rtl_433 on a Weewx &

Re: [weewx-user] Re: Installation at remote site using RPi and VNC?

I just set up an open-vpn server and a raspberrypi as the vpn client. The pi will try to reconnect if the connection dropped. Andy On Tuesday, December 15, 2020 at 11:29:53 AM UTC-8 Sunray wrote: > Correction, the wind direction problem affected only the data archived in > the WLIP

Re: [weewx-user] Cydia pomonella

I will be glad to test this when you get it going. Andy On Thursday, December 17, 2020 at 1:22:15 PM UTC-8 charlescu...@gmail.com wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > On Thu, 17 Dec 2020 12:26:56 -0800 > Tom Keffer wrote: > > > get_serie

Re: [weewx-user] MQTT Connects/Disconnects every loop (?)

Its not the weewx logs that are bothering me - its the mqtt logs, connecting and disconnecting is filling them up - mqtt is something that is made to remain connected to reduce load so I'm not sure it disconnects after every loop? Andy On Thu, 29 Oct 2020 at 17:24, Garry A Lockyer wrote

[weewx-user] Re: RPI + rtl_sdr on weewx 4.2.0

BatteryStatus = battery.50.LaCrosseTX141THBv2Packet Andy -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com

[weewx-user] Re: Weewx and Acurite 5in1 additional sensor data

How do you get the data from acurite into weewx now? USB cable or ?. I use the sdr driver and a rtl_sdr dongle to get the data from my acurite and other senors. Andy -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubs

Re: [weewx-user] Please add to sdr.py

Try this. What are "maybe_rain" and "maybe_flags"? Andy On Monday, October 19, 2020 at 4:14:43 PM UTC-7 tke...@gmail.com wrote: > A PR ("Pull Request") to the SDR github site > <https://github.com/matthewwall/weewx-sdr> is the most efficient way to &

[weewx-user] Re: Version 4.2.0 alpha available

Running Oct 20 06:17:30 raspberrypi3-2 weewx[11462] INFO __main__: Initializing weewx version 4.2.0a1 Oct 20 06:17:30 raspberrypi3-2 weewx[11462] INFO __main__: Using Python 3.7.3 (default, Jul 25 2020, 13:03:44) #012[GCC 8.3.0] Oct 20 06:17:30 raspberrypi3-2 weewx[11462] INFO __main__:

[weewx-user] Re: How to use sensor_map for weewx-sdr?

outTemp = temperature.67.FOWHx080Packet windDir = wind_dir.67.FOWHx080Packet rainTotal = rain_total.67.FOWHx080Packet windSpeed = wind_speed.67.FOWHx080Packet windGust = wind_gust.67.FOWHx080Packet #windTempBatteryStatus = battery.67.FOWHx080Packet

Re: [weewx-user] Re: TFA Weatherhub vs KlimaLogg Pro

of these packets. Thanks -- Andy On 14/12/2017 04:34, mwall wrote: hi andy, welcome to weewx! TFA uses the same hardware as many other vendors.  For example: TFA matrix = lacrosse ws23xx TFA primus = lacrosse ws28xx TFA nexus = hideki te923 the klimalogg and klimalogg pro use the same sensors, but i

Re: [weewx-user] Davis AirLink and PurpleAir

2639894148.html> and this <https://www.aliexpress.com/item/4001039451614.html>. Andy On Tuesday, September 22, 2020 at 12:25:32 PM UTC-7 vince wrote: > On Tuesday, September 22, 2020 at 11:05:10 AM UTC-7, John Kline wrote: > >> In my logs, I see that it is a redirect

[weewx-user] Re: Acurite Atlas SDR Sensor Mapping and Pressure Readings

This for pressure, some else here suggested it and it seems to work ok. Battery: inTempBatteryStatus = battery.152.FOWH25Packe outTempBatteryStatus = battery.1:14.HidekiTS04Packet windBatteryStatus = battery.0A66.Acurite5n1Packet [image:

Re: [weewx-user] Data Not Being Stored in Database

I noticed similar situation with mine also. Except I discovered it in message in Acurite 1035 Display Unit ticker window "Data Logger Full Please Connect to PC to Transfer Data" . I assumed USB connection was hung up for some reason and did full PC restart and Display Unit Reset; just waiting

Re: [weewx-user] Fwd: weewx wx data not updating to display html files

: could you turn on debug (try level 2) and repost log? also, could you post last ten entries of archive table? (only dateTime and outTemp needed) cheers On 21 Aug 2020, at 3:39 pm, VE4PER / Andy <mailto:andrew.webb.501.ve4...@gmail.com>> wrote: Aug 20 22:24:22 {w/s ID} weewx[13049] INFO

[weewx-user] Fwd: weewx wx data not updating to display html files

: *VE4PER / Andy * To: *weewx-user * *** ** **I just began having problem with weewx suddenly not inserting data into files properly.** ** **I tried stopping and restarting weewx, then rebooting the PC, to no avail them remove weewx software saving config files and reinstalling weewx

Re: [weewx-user] Re: Pi Display for Belchertown

It’s just the cheap waveshare 3.5 (which is actually really nice and the touch control works wel) it will fit the adafruit screen as well though. I meant to post in the dedicated screen post but failed to find it so just followed up a previous post in WF Andy On Wed, 19 Aug 2020 at 15:39

Re: [weewx-user] Re: Staging Area to Experiment?

Personally, I was thinking of using VirtualBox to create a RHEL VM on my PC, and then installing it on that. Maybe use vagrant to get it off the ground and make sure I can rinse and repeat. On Wed, 19 Aug 2020 at 12:59, Ξ wrote: > How do you spin up a throwaway instance? > > -- > You received

Re: [weewx-user] Re: Staging Area to Experiment?

tation weewx implementation. I make any significant > changes on the vm first. > > I have considered using docker but lack motivation. > > On Wed, Aug 5, 2020, 3:34 PM vince wrote: > >> On Wednesday, August 5, 2020 at 9:59:28 AM UTC-7, Andy Sloane wrote: >>> &g

[weewx-user] Staging Area to Experiment?

I am using the standard skin on Weewx, and would like to create a "staging area" where I can experiment with different skins. This area would be completely hidden from public view, unless you had the URL. Is this possible? Thanks. -- You received this message because you are subscribed to

Fwd: Re: [weewx-user] Newbie Looking For Hardware Recommendations

FYI for the group Forwarded Message Subject:Re: [weewx-user] Newbie Looking For Hardware Recommendations Date: Mon, 29 Jun 2020 15:31:02 -0500 From: VE4PER / Andy To: Anthony Anthony, I am using an AcuRite 1035 5 in 1 sensor system here and weewx linux

[weewx-user] AcuRite 1035 UHF data link tech characteristics query

I am trying to get SDR Uno &  RSP1A to detect and decode signal between 5 in 1 sensor unit to display unit so I can have a backup diagnostic to verify that data comm link. I can see what appears  I suspect to be it, but it looks like cyclical/repetitive  short bursts on the same approx length

Re: [weewx-user] weewx 4.1.1.1 error query

heers g-eddy On 7 Jun 2020, at 5:55 pm, VE4PER / Andy <mailto:andrew.webb.501.ve4...@gmail.com>> wrote: Thanks for your time and tips Graham. Andy weewx.conf entries StdRESTful related I changed the red statements to what is shown in green below; the key error appears corrected bu

Re: [weewx-user] weewx 4.1.1.1 error query

ith a recent distribution to look for more gaps. cheers g-eddy On 7 Jun 2020, at 5:55 pm, VE4PER / Andy <mailto:andrew.webb.501.ve4...@gmail.com>> wrote: Thanks for your time and tips Graham. Andy weewx.conf entries StdRESTful related I changed the red statements to what is shown in green

Fwd: Re: [weewx-user] weewx 4.1.1.1 error query

If somebody knows what URL and it's format is in question here and where to enter it I would appreciate knowing Thanks and Thanks again Graham Andy Forwarded Message Subject:Re: [weewx-user] weewx 4.1.1.1 error query Date: Sun, 7 Jun 2020 02:55:55 -0500 From

[weewx-user] weewx 4.1.1.1 error query

f, key) Jun  7 01:08:04 cedar weewx[47128] CRITICAL __main__: KeyError: 'StdRESTful' Jun  7 01:08:04 cedar weewx[47128] CRITICAL __main__: Exiting.  Any and all tips or help would be appreciated, Thanks Andy -- You received this message because you are subscribed to the Google Groups

[weewx-user] Re: importing weewx.sql not working

vers of weewx did on install? so before installing weewx just creatie an empty database weewx with weewx userID and weewx PW? Clearly a good reason why problems occurring when table structures are incorrect. On Sunday, May 17, 2020 at 8:07:46 PM UTC-5, VE4PER / Andy wrote: > > Hello,

[weewx-user] Re: importing weewx.sql not working

er version; BUT IT WORKS properly. On Sunday, May 17, 2020 at 8:07:46 PM UTC-5, VE4PER / Andy wrote: > > Hello, > > I did an export database from old mysql db using phpmyadmin. I copied the > weewx.sql file over to the new machine and tried to import data into the > empty weewx

[weewx-user] importing weewx.sql not working

or pointers would be appreciated Thanks Andy -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this

[weewx-user] Unable to install on UbuntuStudio 20.04LTS

for this recommended; does anyone know ? Thanks 73 & good DX Andy -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroup

[weewx-user] Re: Weewx and Weathercloud

Fantastic - seems to now be uploading the correct data to WeatherCloud! Something as simple as a misreading . I was taking T_3 as being sensor 3, when in fact t_4 is sensor 3. Thank you for you patience and help during this, I'm not a Linux guru, and just have the very basic grasp. Getting the

[weewx-user] Re: Weewx and Weathercloud

LOOP: 2020-05-11 12:55:18 BST (1589198118) appTemp: None, barometer: 29.8271329992, cloudbase: None, dateTime: 1589198118, dewpoint: None, extraBatteryStatus1: 0, extraBatteryStatus2: 0, extraBatteryStatus3: 0, extraBatteryStatus4: 0, extraHumid1: None, extraHumid2: None, extraHumid3: 65,

[weewx-user] Re: Weewx and Weathercloud

May 11 10:54:02 raspberrypi weewx[15924]: te923: sensor map is {'extraBatteryStatus1': 'bat_2', 'outTemp': 't_3', 'outHumidity': 'h_1', 'extraHumid4': 'h_5', 'uvBatteryStatus': 'bat_uv', 'extraHumid2': 'h_3', 'extraHumid3': 'h_4', 'rainLinkStatus': 'link_rain', 'extraHumid1': 'h_2',

[weewx-user] Re: Weewx and Weathercloud

Hi Gary. After some testing and queries on other forums regarding the driver, it appears that my system is reporting the external temperature on sensor 3, with the TE923 driver using sensor 1. I was advised to try adding a sensor_map to the weewx.conf file. I added the information to the

[weewx-user] Re: Pressure data - SDR - Ecowitt GW1000/Froggit DP1500

[[sensor_map]] inTemp = temperature.152.FOWH25Packet inHumidity = humidity.152.FOWH25Packet pressure = pressure.152.FOWH25Packet inTempBatteryStatus = battery.152.FOWH25Packet On Monday, May 4, 2020 at 4:19:34 PM UTC-7, Richard Horobin wrote: > > I have a WH25 that

[weewx-user] Re: Weewx and Weathercloud

Sorry my fault, I'd only ever seen Debug - 1 in the Weewx instructions and just thought you'd had a typo ! Hopefully its right this time... May 4 07:26:59 raspberrypi systemd[1]: Starting LSB: weewx weather system... May 4 07:27:00 raspberrypi weewx[11302]: engine: Initializing weewx

[weewx-user] Re: Weewx and Weathercloud

Hopefully this is what your requiring and the information to help is in there somewhere. Thnx May 3 15:25:02 raspberrypi systemd[1]: Starting LSB: weewx weather system... May 3 15:25:04 raspberrypi weewx[4091]: engine: Initializing weewx version 3.9.2 May 3 15:25:04 raspberrypi weewx[4091]:

[weewx-user] Weewx and Weathercloud

No problems, I'll get that done, but what are the archive intervals? Where do I see this information, or is there a set time? -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send

[weewx-user] Weewx and Weathercloud

I've setup my weewx to upload data to Weathercloud. On my Weathercloud Station page app.weathercloud.net/d9110687615#profile its showing that it's receiving data from my setup, the Barometer reading is correct, but there's no other data getting through and being displayed. I've run the

[weewx-user] MQTT - Min/Max values ?

Just wondering if its possible to add Min/Max tags for the day to topics - so Min / Max temperature etc. It would mean i could use MQTT for all my outputs, rather than just the current live ones.. i have had a look and cant work out if its possible, Hope thats ok to ask, Andy -- You

[weewx-user] Re: Is AcuRite 00899 rain gauge supported with weewx and rtl_433?

may be here https://github.com/merbanan/rtl_433/tree/feat-acurite899 https://github.com/merbanan/rtl_433/issues/972 On Monday, January 27, 2020 at 5:26:59 AM UTC-8, Helmut Bachmann wrote: > > > Hi everyone, > > I´d appreciate your confirmation if AcuRite 00899 rain gauge is supported > with

[weewx-user] Ecowitt and WeeWx

Is Ecowitt the same as a Fine Offset? This may work: https://github.com/weewx/weewx/wiki/sdr-rpi-recipe Andy -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, sen

[weewx-user] Re: sensor data wind and rain hideki (tfa Sinus-bresser ...)

I am glad it worked. The sdr.py driver as not reading the wind and rain sensor. The output from rtl_433 has changed due to a different sensor or rtl_433 change. You can see the changes here. Old

[weewx-user] Re: PSA - sale on training courses at udemy

I am taking my first class on udemy and really like it. Just got this one on sale, bit more weewx related. Thanks Vince! -- You received this

[weewx-user] Re: sensor data wind and rain hideki (tfa Sinus-bresser ...)

be different. Andy -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web vi

[weewx-user] Re: sensor data wind and rain hideki (tfa Sinus-bresser ...)

. Andy [SDR] # This section is for the software-defined radio driver. # The driver to use driver = user.sdr log_unknown_sensors = True log_unmapped_sensors = True [[sensor_map]] -- You received this message because you are subscribed to the Google Groups

Re: [weewx-user] Re: Does weewx output conditions as text?

. No worries - although it would be a nice feature to have :) and it would be a nice extension Andy On Thu, 24 Oct 2019 at 06:43, Andrew Milner wrote: > If the OP wants future conditions then he can use a forecasting module as > you suggest - but if for real present conditions then it b

[weewx-user] Does weewx output conditions as text?

Morning - Just wondering if there is a way to output a text string for conditions - ie raining, partly cloudy etc? I cant seem to find one but thought i might be missing something basic so thought i would ask here, Andy -- You received this message because you are subscribed to the Google

[weewx-user] Re: Random Stoppages

systemType="NVMS-9000" Are you intercepting your IP NVR traffic? Andy -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr

[weewx-user] Re: Max Temp ClientRaw Node Red Dashboard/

system is behind a work firewall so its not as easy to reach to debug as normal but weewx-wd seems to be working.. Andy -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, sen

[weewx-user] Re: Max Temp ClientRaw Node Red Dashboard/

Thanks for the reply - i am using MQTT for the loop data via the set up used for the Belchertown page - but using the weewx-realtime_clientraw for the max min data... Andy -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubs

[weewx-user] Re: weewx-sdr not storing data packets of WH1080

= battery.0A66.Acurite5n1Packet outTemp = temperature.3C47.AcuriteLightningPacket outHumidity = humidity.3C47.AcuriteLightningPacket outTempBatteryStatus = battery.3C47.AcuriteLightningPacket The indentation looks off. Andy -- You received this message because you

[weewx-user] Max Temp ClientRaw Node Red Dashboard/

, our clientraw is at http://weather.casa.ucl.ac.uk/weewx/clientraw.txt Any ideas would be great... Andy -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[weewx-user] Re: AcuRite impoer/load data logger

weewx? And when you visit grab a copy of the database. Andy On Sunday, September 29, 2019 at 9:28:12 AM UTC-7, comatose1978 wrote: > > I have a 5 in 1 weather station (2032C). > It is not continuously connected to a pc, and it is at a remote location. > When I get to the location I a

[weewx-user] MQTT - Max / Min Day etc

Afternoon all, Wondering if there is a way to add new tags to the MQTT output of weewx - ie Max Temp for the Day, Max Wind last hour etc? I see the template can add tags but not sure how to add them so MQTT outputs them,. Any help would be great, Thanks Andy -- You received this message

Re: [weewx-user] Re: Rasberry Pi weather station with anemometer and camera only

Davis sensor connection info is here http://cactus.io/hookups/weather/anemometer/davis/hookup-arduino-to-davis-anemometer -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an

[weewx-user] Re: Godaddy FTP problem

log in to godaddy, go to hosting, then ftp users. Make sure your FTP user is there and maybe reset the password. try ftp from the command line and post the results. Or better yet use rsync <http://www.weewx.com/docs/usersguide.htm#config_RSYNC>! Andy -- You received this message becau

[weewx-user] Re: Weewx with only extra sensors

So if you always had at least on sensor sending sdr events would that fix it? Like add a $12 acurite temp sensor or https://m.aliexpress.com/item/32621769220.html and get rid of the fileparse. I guess I don't really understand the loop packets with multiple sdr devices. -- You received this

[weewx-user] Re: ClientRaw - Loop to Server?

Brilliant that worked a treat and clientraw is decoding nicely - i use it to convert the data to strong for text to a LED Matrix, every couple of mins. Much appreciated, Andy -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubs

  1   2   3   >