Hi,
As I understand it both WU and AWEKAS expect WeeWX field ‘barometer’ for
pressure. Have you set debug = 2, restarted WeeWX and checked the log to
see what data is actually being posted by WeeWX? Also, would help to know
something about your setup, what station do you use and which WeeWX
‘new’ envoy?
Gary
On Friday, 5 March 2021 at 01:39:10 UTC+10 tke...@gmail.com wrote:
> What do you mean by "net Envoy"? If you are using a serial port like
> /dev/ttyUSB0, the logger should be plugged in via a USB connector, not a
> network connector. Or, are you using an IP logger?
>
> On
Yes, apologieswas in a rush typing and did not review."new
envoy"..it should be...and "initiation" is the other typo!
On Friday, 5 March 2021 at 08:33:36 UTC+13 gjr80 wrote:
> ‘new’ envoy?
>
> Gary
>
> On Friday, 5 March 2021 at 01:39:10 UTC+10 tke...@gmail.com wrote:
>
>> What do
Well, if you're sure you have the right port (/dev/ttyUSB0), and you have
correctly completed the test (a couple of enters, followed by ENTER, all
caps) and you got nothing back, then that is as definitive a test that I
know of that you have a connectivity problem.
Do you have a USB version of
‘new’ logger?
Gary
On Friday, 5 March 2021 at 01:39:10 UTC+10 tke...@gmail.com wrote:
> What do you mean by "net Envoy"? If you are using a serial port like
> /dev/ttyUSB0, the logger should be plugged in via a USB connector, not a
> network connector. Or, are you using an IP logger?
>
> On
pi@WeatherPi:~ $ lsusb
Bus 001 Device 006: ID 0403:6001 Future Technology Devices International,
Ltd FT232 Serial (UART) IC
Bus 001 Device 005: ID 13fe:4100 Kingston Technology Company Inc. Flash
drive
Bus 001 Device 004: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 003: ID 0424:ec00
Not using serial...using USB.
On Friday, 5 March 2021 at 10:34:32 UTC+13 monmul wrote:
> pi@WeatherPi:~ $ lsusb
> Bus 001 Device 006: ID 0403:6001 Future Technology Devices International,
> Ltd FT232 Serial (UART) IC
> Bus 001 Device 005: ID 13fe:4100 Kingston Technology Company Inc. Flash
>
Did you ls the directory containing the extension package to confirm the
file name? According to the Belchertown repo the 1.2 extension package is
named weewx-belchertown-release-1.2.tar.gz, slightly different to that used
in your commands.
Gary
On Friday, 5 March 2021 at 12:28:08 UTC+10
Vince - thanks! I'll take that approach on the imports!
Glenn:
I had hand-transcribed the command entry - i'd entered the correct command
string:
sudo /home/weewx/bin/wee_extension --install
/home/david/Downloads/weewx-belchertown-1.2.tar.gz |& tee
/tmp/wee-extension-out.txt
This is the
pi@WeatherPi:~ $ lsusb
Bus 001 Device 005: ID 13fe:4100 Kingston Technology Company Inc. Flash
drive
Bus 001 Device 004: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514
Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514
Thanks guys, I could solve my problem.
tke...@gmail.com schrieb am Donnerstag, 4. März 2021 um 16:45:07 UTC+1:
> As Karen says, you have two errors. I cannot speak to the error in the
> Belchertown skin.
>
> However, the upload to wetter.com may have failed because you have an
> older
The device "Future Technologies" is probably your Envoy.
On Thu, Mar 4, 2021 at 1:35 PM monmul wrote:
> Not using serial...using USB.
>
> On Friday, 5 March 2021 at 10:34:32 UTC+13 monmul wrote:
>
>> pi@WeatherPi:~ $ lsusb
>> Bus 001 Device 006: ID 0403:6001 Future Technology Devices
Gary:
ls -l /home/david/Downloads:
-r 1 david david 1518145 Mar 3 18:02
weewx-belchertown-release-1.2.tar.gz
and i used the fully qualified sudo string for execution:
sudo /home/weewx/bin/wee_extension --install
/home/david/Downloads/weewx-belchertown-1.2.tar.gz
On Thursday, March 4,
One good way to identify a USB device is to unplug it, plug it back in, and
see what the 'dmesg' command reported.You'll tend to be able to figure
out which USB port it connected to that way.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
Hi Christian,
you might want to move all your customizations to the weewx.conf file (and
not store them in skin.conf).
The reason is: When you update the belchertown skin, all your changes to
the skin.conf will be lost.
Manfred
radermache...@gmail.com schrieb am Donnerstag, 4. März 2021 um
Hey
I'm quite new to the field with the Raspberry Pi. Now to my question.. We
got a job at school to implement a scientific project with the help of a
Raspberry Pie. Since I am very interested in the weather and climatology, I
thought that I would build a climate logger/weather staion with the
I see 2 errors that seem independent to me:
- Upload to wetter.com fails
- AerisWeather data could not be downloaded
I would start checking the account at both those services.
Andre schrieb am Donnerstag, 4. März 2021 um 10:08:28 UTC+1:
> First: I use WeeWX 4.4.0.0 at Raspberry Pi 4.
Thanks Manfred,
i am on the way. I do this for alle Custom things in the skin, also the new
Page "Über die Station". Your Station is a great template, for this. I have
disabled the "Reports Page too.
Now I am searching for translation for aeris forecast.
Regards
Christian
Manfred Maier
First: I use WeeWX 4.4.0.0 at Raspberry Pi 4. Skin Belchertown.
Yesterday WeeWX has stopped working. Last data are from 2021-03-03 at 19:40
MEZ.
MQTT is working as aspected.
I've tried:
sudo wee_database weewx.conf --drop-daily
sudo wee_database weewx.conf --rebuild-daily
sudo wee_database
I copied only the necessary sections to whew, conf.
But consider, that the Section have other [ ] levels. Each Section is 2
brackets deeper than in skin.conf.
Regards
Christian
didier@gmail.com schrieb am Donnerstag, 4. März 2021 um 09:59:14 UTC+1:
> Hi
>
> Is skin.conf could be « copied «
There is no out-of-the-box template for displaying these values. The way
you did this, is one of several possible ways to go. Adapting the templates
to your own, customized needs, is always possible.
For the missing template in the installer: thank you, I fixed it.
Michael schrieb am
Is there a (hopefully simple) way to display the values of the gauge in
tabular form (e.g. as they are displayed in the Seasons skin)?
For this display I have added the lines to the file livegauges.html.tmpl
$Labels.Generic.outTemp
23 °C
Sorry, I saved the Problem.
Started with a new skin.conf I transfer all Customizing step by step to the
whew conf.
No it worked correct, and is the better solution.
Regards
Christian
Christian Radermacher schrieb am Mittwoch, 3. März 2021 um 21:42:36 UTC+1:
> Hi,
> i have an error if I
Thank's
Le jeu. 4 mars 2021 à 10:08, Christian Radermacher <
radermacherchrist...@gmail.com> a écrit :
> I copied only the necessary sections to whew, conf.
> But consider, that the Section have other [ ] levels. Each Section is 2
> brackets deeper than in skin.conf.
>
> Regards
> Christian
>
>
Hi
Is skin.conf could be « copied « completly in weewx.conf or just a part ?
Didier
Le jeu. 4 mars 2021 à 09:38, Manfred Maier a
écrit :
> Hi Christian,
> you might want to move all your customizations to the weewx.conf file (and
> not store them in skin.conf).
> The reason is: When you
What do you mean by "net Envoy"? If you are using a serial port like
/dev/ttyUSB0, the logger should be plugged in via a USB connector, not a
network connector. Or, are you using an IP logger?
On Wed, Mar 3, 2021 at 8:38 PM monmul wrote:
> I have not had time to do the reseating
As Karen says, you have two errors. I cannot speak to the error in the
Belchertown skin.
However, the upload to wetter.com may have failed because you have an
older version of the wetter extension. This error was fixed in V0.7. Try
upgrading your copy of the extension.
On Thu, Mar 4, 2021 at
I tried it, and it is working.
sbar...@gmail.com schrieb am Sonntag, 28. Februar 2021 um 22:10:29 UTC+1:
> Hi,
>
> Thanks for the info. I updated the installer.
>
> On Sunday, February 28, 2021 at 9:14:57 PM UTC+1 pmcg...@gmail.com wrote:
>
>> Your installer adds UsUnit instead of the required
Did you read the following:
https://groups.google.com/g/weewx-user/c/udZCCCJlNE8/m/LeR2Mp3iBQAJ
On Thursday, March 4, 2021 at 5:34:07 AM UTC-5 giulianodir...@gmail.com
wrote:
> Hey
>
> I'm quite new to the field with the Raspberry Pi. Now to my question.. We
> got a job at school to implement
Hello,
after updating weewx I have some trouble with AWEKAS:
Pressure (station):
1,014.77 hPa --> ok
Pressure posted to AWEKAS:
1030.4 hPa --> not ok
Pressure posted to WU:
1,014.77 hPa --> ok
any ideas?
--
You received this message because you are subscribed to the Google Groups
Thanks Tom,
the aqi guy does not respond for longer time, but i restarted the weewx
today and it is working. AQI is taking only values from last 12 hours, this
is maybe the reason.
Michal
Dátum: streda 3. marca 2021, čas: 22:57:53 UTC+1, odosielateľ:
tke...@gmail.com
> It looks like the
or just note which /dev/ttyUSB* comes and goes
once identified i like to put in a udev rule to create a known device file such
as /dev/vp2
> On 5 Mar 2021, at 12:33 pm, vince wrote:
>
> One good way to identify a USB device is to unplug it, plug it back in, and
> see what the 'dmesg' command
Perhaps I need to change my glasses, but the last time I looked
*weewx-belchertown-release-1.2.tar.gz* is different to
*weewx-belchertown-1.2.tar.gz*.
Perhaps you should try:
$ sudo /home/weewx/bin/wee_extension --install
/home/david/Downloads/weewx-belchertown-release-1.2.tar.gz
Gary
On
33 matches
Mail list logo